# /etc/ntp.conf, configuration for ntpd # ntpd will use syslog() if logfile is not defined #logfile /var/log/ntpd driftfile /var/lib/ntp/ntp.drift statsdir /var/log/ntpstats/ statistics loopstats peerstats clockstats filegen loopstats file loopstats type day enable filegen peerstats file peerstats type day enable filegen clockstats file clockstats type day enable # You do need to talk to an NTP server or two (or three). #server ntp.your-provider.example # pool.ntp.org maps to more than 100 low-stratum NTP servers. # Your server will pick a different set every time it starts up. # *** Please consider joining the pool! *** # *** *** server pool.ntp.org #server pool.ntp.org ## uncomment for extra reliability # ... and use the local system clock as a reference if all else fails # NOTE: in a local network, set the local stratum of *one* stable server # to 10; otherwise your clocks will drift apart if you lose connectivity. server 127.127.1.0 fudge 127.127.1.0 stratum 13 # By default, exchange time with everybody, but don't allow configuration. # See /usr/share/doc/ntp-doc/html/accopt.html for details. restrict default kod notrap nomodify nopeer noquery # Local users may interrogate the ntp server more closely. restrict 127.0.0.1 nomodify # Clients from this (example!) subnet have unlimited access, # but only if cryptographically authenticated #restrict 192.168.123.0 mask 255.255.255.0 notrust # If you want to provide time to your local subnet, change the next line. # (Again, the address is an example only.) #broadcast 192.168.123.255 # If you want to listen to time broadcasts on your local subnet, # de-comment the next lines. Please do this only if you trust everybody # on the network! #disable auth #broadcastclient