--- /dev/null
+##
+## radiusd.conf -- FreeRADIUS server configuration file.
+##
+## http://www.freeradius.org/
+## $Id: radiusd.conf.in,v 1.188.2.4.2.18 2007/07/16 10:53:13 pnixon Exp $
+##
+
+# The location of other config files and
+# logfiles are declared in this file
+#
+# Also general configuration for modules can be done
+# in this file, it is exported through the API to
+# modules that ask for it.
+#
+# The configuration variables defined here are of the form ${foo}
+# They are local to this file, and do not change from request to
+# request.
+#
+# The per-request variables are of the form %{Attribute-Name}, and
+# are taken from the values of the attribute in the incoming
+# request. See 'doc/variables.txt' for more information.
+
+prefix = /usr
+exec_prefix = /usr
+sysconfdir = /etc
+localstatedir = /var
+sbindir = ${exec_prefix}/sbin
+logdir = /var/log/freeradius
+raddbdir = /etc/freeradius
+radacctdir = ${logdir}/radacct
+
+# Location of config and logfiles.
+confdir = ${raddbdir}
+run_dir = ${localstatedir}/run/freeradius
+
+#
+# The logging messages for the server are appended to the
+# tail of this file.
+#
+log_file = ${logdir}/radius.log
+
+#
+# libdir: Where to find the rlm_* modules.
+#
+# This should be automatically set at configuration time.
+#
+# If the server builds and installs, but fails at execution time
+# with an 'undefined symbol' error, then you can use the libdir
+# directive to work around the problem.
+#
+# The cause is usually that a library has been installed on your
+# system in a place where the dynamic linker CANNOT find it. When
+# executing as root (or another user), your personal environment MAY
+# be set up to allow the dynamic linker to find the library. When
+# executing as a daemon, FreeRADIUS MAY NOT have the same
+# personalized configuration.
+#
+# To work around the problem, find out which library contains that symbol,
+# and add the directory containing that library to the end of 'libdir',
+# with a colon separating the directory names. NO spaces are allowed.
+#
+# e.g. libdir = /usr/local/lib:/opt/package/lib
+#
+# You can also try setting the LD_LIBRARY_PATH environment variable
+# in a script which starts the server.
+#
+# If that does not work, then you can re-configure and re-build the
+# server to NOT use shared libraries, via:
+#
+# ./configure --disable-shared
+# make
+# make install
+#
+libdir = /usr/lib/freeradius
+
+# pidfile: Where to place the PID of the RADIUS server.
+#
+# The server may be signalled while it's running by using this
+# file.
+#
+# This file is written when ONLY running in daemon mode.
+#
+# e.g.: kill -HUP `cat /var/run/freeradius/freeradius.pid`
+#
+pidfile = ${run_dir}/freeradius.pid
+
+
+# user/group: The name (or #number) of the user/group to run radiusd as.
+#
+# If these are commented out, the server will run as the user/group
+# that started it. In order to change to a different user/group, you
+# MUST be root ( or have root privleges ) to start the server.
+#
+# We STRONGLY recommend that you run the server with as few permissions
+# as possible. That is, if you're not using shadow passwords, the
+# user and group items below should be set to 'nobody'.
+#
+# On SCO (ODT 3) use "user = nouser" and "group = nogroup".
+#
+# NOTE that some kernels refuse to setgid(group) when the value of
+# (unsigned)group is above 60000; don't use group nobody on these systems!
+#
+# On systems with shadow passwords, you might have to set 'group = shadow'
+# for the server to be able to read the shadow password file. If you can
+# authenticate users while in debug mode, but not in daemon mode, it may be
+# that the debugging mode server is running as a user that can read the
+# shadow info, and the user listed below can not.
+#
+user = freerad
+group = freerad
+
+# max_request_time: The maximum time (in seconds) to handle a request.
+#
+# Requests which take more time than this to process may be killed, and
+# a REJECT message is returned.
+#
+# WARNING: If you notice that requests take a long time to be handled,
+# then this MAY INDICATE a bug in the server, in one of the modules
+# used to handle a request, OR in your local configuration.
+#
+# This problem is most often seen when using an SQL database. If it takes
+# more than a second or two to receive an answer from the SQL database,
+# then it probably means that you haven't indexed the database. See your
+# SQL server documentation for more information.
+#
+# Useful range of values: 5 to 120
+#
+max_request_time = 30
+
+# delete_blocked_requests: If the request takes MORE THAN 'max_request_time'
+# to be handled, then maybe the server should delete it.
+#
+# If you're running in threaded, or thread pool mode, this setting
+# should probably be 'no'. Setting it to 'yes' when using a threaded
+# server MAY cause the server to crash!
+#
+delete_blocked_requests = no
+
+# cleanup_delay: The time to wait (in seconds) before cleaning up
+# a reply which was sent to the NAS.
+#
+# The RADIUS request is normally cached internally for a short period
+# of time, after the reply is sent to the NAS. The reply packet may be
+# lost in the network, and the NAS will not see it. The NAS will then
+# re-send the request, and the server will respond quickly with the
+# cached reply.
+#
+# If this value is set too low, then duplicate requests from the NAS
+# MAY NOT be detected, and will instead be handled as seperate requests.
+#
+# If this value is set too high, then the server will cache too many
+# requests, and some new requests may get blocked. (See 'max_requests'.)
+#
+# Useful range of values: 2 to 10
+#
+cleanup_delay = 5
+
+# max_requests: The maximum number of requests which the server keeps
+# track of. This should be 256 multiplied by the number of clients.
+# e.g. With 4 clients, this number should be 1024.
+#
+# If this number is too low, then when the server becomes busy,
+# it will not respond to any new requests, until the 'cleanup_delay'
+# time has passed, and it has removed the old requests.
+#
+# If this number is set too high, then the server will use a bit more
+# memory for no real benefit.
+#
+# If you aren't sure what it should be set to, it's better to set it
+# too high than too low. Setting it to 1000 per client is probably
+# the highest it should be.
+#
+# Useful range of values: 256 to infinity
+#
+max_requests = 1024
+
+# bind_address: Make the server listen on a particular IP address, and
+# send replies out from that address. This directive is most useful
+# for machines with multiple IP addresses on one interface.
+#
+# It can either contain "*", or an IP address, or a fully qualified
+# Internet domain name. The default is "*"
+#
+# As of 1.0, you can also use the "listen" directive. See below for
+# more information.
+#
+bind_address = *
+
+# port: Allows you to bind FreeRADIUS to a specific port.
+#
+# The default port that most NAS boxes use is 1645, which is historical.
+# RFC 2138 defines 1812 to be the new port. Many new servers and
+# NAS boxes use 1812, which can create interoperability problems.
+#
+# The port is defined here to be 0 so that the server will pick up
+# the machine's local configuration for the radius port, as defined
+# in /etc/services.
+#
+# If you want to use the default RADIUS port as defined on your server,
+# (usually through 'grep radius /etc/services') set this to 0 (zero).
+#
+# A port given on the command-line via '-p' over-rides this one.
+#
+# As of 1.0, you can also use the "listen" directive. See below for
+# more information.
+#
+port = 0
+
+#
+# By default, the server uses "bind_address" to listen to all IP's
+# on a machine, or just one IP. The "port" configuration is used
+# to select the authentication port used when listening on those
+# addresses.
+#
+# If you want the server to listen on additional addresses, you can
+# use the "listen" section. A sample section (commented out) is included
+# below. This "listen" section duplicates the functionality of the
+# "bind_address" and "port" configuration entries, but it only listens
+# for authentication packets.
+#
+# If you comment out the "bind_address" and "port" configuration entries,
+# then it becomes possible to make the server accept only accounting,
+# or authentication packets. Previously, it always listened for both
+# types of packets, and it was impossible to make it listen for only
+# one type of packet.
+#
+#listen {
+ # IP address on which to listen.
+ # Allowed values are:
+ # dotted quad (1.2.3.4)
+ # hostname (radius.example.com)
+ # wildcard (*)
+# ipaddr = *
+
+ # Port on which to listen.
+ # Allowed values are:
+ # integer port number (1812)
+ # 0 means "use /etc/services for the proper port"
+# port = 0
+
+ # Type of packets to listen for.
+ # Allowed values are:
+ # auth listen for authentication packets
+ # acct listen for accounting packets
+ #
+# type = auth
+#}
+
+
+# hostname_lookups: Log the names of clients or just their IP addresses
+# e.g., www.freeradius.org (on) or 206.47.27.232 (off).
+#
+# The default is 'off' because it would be overall better for the net
+# if people had to knowingly turn this feature on, since enabling it
+# means that each client request will result in AT LEAST one lookup
+# request to the nameserver. Enabling hostname_lookups will also
+# mean that your server may stop randomly for 30 seconds from time
+# to time, if the DNS requests take too long.
+#
+# Turning hostname lookups off also means that the server won't block
+# for 30 seconds, if it sees an IP address which has no name associated
+# with it.
+#
+# allowed values: {no, yes}
+#
+hostname_lookups = no
+
+# Core dumps are a bad thing. This should only be set to 'yes'
+# if you're debugging a problem with the server.
+#
+# allowed values: {no, yes}
+#
+allow_core_dumps = no
+
+# Regular expressions
+#
+# These items are set at configure time. If they're set to "yes",
+# then setting them to "no" turns off regular expression support.
+#
+# If they're set to "no" at configure time, then setting them to "yes"
+# WILL NOT WORK. It will give you an error.
+#
+regular_expressions = yes
+extended_expressions = yes
+
+# Log the full User-Name attribute, as it was found in the request.
+#
+# allowed values: {no, yes}
+#
+log_stripped_names = no
+
+# Log authentication requests to the log file.
+#
+# allowed values: {no, yes}
+#
+log_auth = no
+
+# Log passwords with the authentication requests.
+# log_auth_badpass - logs password if it's rejected
+# log_auth_goodpass - logs password if it's correct
+#
+# allowed values: {no, yes}
+#
+log_auth_badpass = no
+log_auth_goodpass = no
+
+# usercollide: Turn "username collision" code on and off. See the
+# "doc/duplicate-users" file
+#
+# WARNING
+# !!!!!!! Setting this to "yes" may result in the server behaving
+# !!!!!!! strangely. The "username collision" code will ONLY work
+# !!!!!!! with clear-text passwords. Even then, it may not do what
+# !!!!!!! you want, or what you expect.
+# !!!!!!!
+# !!!!!!! We STRONGLY RECOMMEND that you do not use this feature,
+# !!!!!!! and that you find another way of acheiving the same goal.
+# !!!!!!!
+# !!!!!!! e,g. module fail-over. See 'doc/configurable_failover'
+# WARNING
+#
+usercollide = no
+
+# lower_user / lower_pass:
+# Lower case the username/password "before" or "after"
+# attempting to authenticate.
+#
+# If "before", the server will first modify the request and then try
+# to auth the user. If "after", the server will first auth using the
+# values provided by the user. If that fails it will reprocess the
+# request after modifying it as you specify below.
+#
+# This is as close as we can get to case insensitivity. It is the
+# admin's job to ensure that the username on the auth db side is
+# *also* lowercase to make this work
+#
+# Default is 'no' (don't lowercase values)
+# Valid values = "before" / "after" / "no"
+#
+lower_user = no
+lower_pass = no
+
+# nospace_user / nospace_pass:
+#
+# Some users like to enter spaces in their username or password
+# incorrectly. To save yourself the tech support call, you can
+# eliminate those spaces here:
+#
+# Default is 'no' (don't remove spaces)
+# Valid values = "before" / "after" / "no" (explanation above)
+#
+nospace_user = no
+nospace_pass = no
+
+# The program to execute to do concurrency checks.
+checkrad = ${sbindir}/checkrad
+
+# SECURITY CONFIGURATION
+#
+# There may be multiple methods of attacking on the server. This
+# section holds the configuration items which minimize the impact
+# of those attacks
+#
+security {
+ #
+ # max_attributes: The maximum number of attributes
+ # permitted in a RADIUS packet. Packets which have MORE
+ # than this number of attributes in them will be dropped.
+ #
+ # If this number is set too low, then no RADIUS packets
+ # will be accepted.
+ #
+ # If this number is set too high, then an attacker may be
+ # able to send a small number of packets which will cause
+ # the server to use all available memory on the machine.
+ #
+ # Setting this number to 0 means "allow any number of attributes"
+ max_attributes = 200
+
+ #
+ # reject_delay: When sending an Access-Reject, it can be
+ # delayed for a few seconds. This may help slow down a DoS
+ # attack. It also helps to slow down people trying to brute-force
+ # crack a users password.
+ #
+ # Setting this number to 0 means "send rejects immediately"
+ #
+ # If this number is set higher than 'cleanup_delay', then the
+ # rejects will be sent at 'cleanup_delay' time, when the request
+ # is deleted from the internal cache of requests.
+ #
+ # Useful ranges: 1 to 5
+ reject_delay = 1
+
+ #
+ # status_server: Whether or not the server will respond
+ # to Status-Server requests.
+ #
+ # Normally this should be set to "no", because they're useless.
+ # See: http://www.freeradius.org/rfc/rfc2865.html#Keep-Alives
+ #
+ # However, certain NAS boxes may require them.
+ #
+ # When sent a Status-Server message, the server responds with
+ # an Access-Accept packet, containing a Reply-Message attribute,
+ # which is a string describing how long the server has been
+ # running.
+ #
+ status_server = no
+}
+
+# PROXY CONFIGURATION
+#
+# proxy_requests: Turns proxying of RADIUS requests on or off.
+#
+# The server has proxying turned on by default. If your system is NOT
+# set up to proxy requests to another server, then you can turn proxying
+# off here. This will save a small amount of resources on the server.
+#
+# If you have proxying turned off, and your configuration files say
+# to proxy a request, then an error message will be logged.
+#
+# To disable proxying, change the "yes" to "no", and comment the
+# $INCLUDE line.
+#
+# allowed values: {no, yes}
+#
+proxy_requests = yes
+$INCLUDE ${confdir}/proxy.conf
+
+
+# CLIENTS CONFIGURATION
+#
+# Client configuration is defined in "clients.conf".
+#
+
+# The 'clients.conf' file contains all of the information from the old
+# 'clients' and 'naslist' configuration files. We recommend that you
+# do NOT use 'client's or 'naslist', although they are still
+# supported.
+#
+# Anything listed in 'clients.conf' will take precedence over the
+# information from the old-style configuration files.
+#
+$INCLUDE ${confdir}/clients.conf
+
+
+# SNMP CONFIGURATION
+#
+# Snmp configuration is only valid if SNMP support was enabled
+# at compile time.
+#
+# To enable SNMP querying of the server, set the value of the
+# 'snmp' attribute to 'yes'
+#
+snmp = no
+$INCLUDE ${confdir}/snmp.conf
+
+
+# THREAD POOL CONFIGURATION
+#
+# The thread pool is a long-lived group of threads which
+# take turns (round-robin) handling any incoming requests.
+#
+# You probably want to have a few spare threads around,
+# so that high-load situations can be handled immediately. If you
+# don't have any spare threads, then the request handling will
+# be delayed while a new thread is created, and added to the pool.
+#
+# You probably don't want too many spare threads around,
+# otherwise they'll be sitting there taking up resources, and
+# not doing anything productive.
+#
+# The numbers given below should be adequate for most situations.
+#
+thread pool {
+ # Number of servers to start initially --- should be a reasonable
+ # ballpark figure.
+ start_servers = 5
+
+ # Limit on the total number of servers running.
+ #
+ # If this limit is ever reached, clients will be LOCKED OUT, so it
+ # should NOT BE SET TOO LOW. It is intended mainly as a brake to
+ # keep a runaway server from taking the system with it as it spirals
+ # down...
+ #
+ # You may find that the server is regularly reaching the
+ # 'max_servers' number of threads, and that increasing
+ # 'max_servers' doesn't seem to make much difference.
+ #
+ # If this is the case, then the problem is MOST LIKELY that
+ # your back-end databases are taking too long to respond, and
+ # are preventing the server from responding in a timely manner.
+ #
+ # The solution is NOT do keep increasing the 'max_servers'
+ # value, but instead to fix the underlying cause of the
+ # problem: slow database, or 'hostname_lookups=yes'.
+ #
+ # For more information, see 'max_request_time', above.
+ #
+ max_servers = 32
+
+ # Server-pool size regulation. Rather than making you guess
+ # how many servers you need, FreeRADIUS dynamically adapts to
+ # the load it sees, that is, it tries to maintain enough
+ # servers to handle the current load, plus a few spare
+ # servers to handle transient load spikes.
+ #
+ # It does this by periodically checking how many servers are
+ # waiting for a request. If there are fewer than
+ # min_spare_servers, it creates a new spare. If there are
+ # more than max_spare_servers, some of the spares die off.
+ # The default values are probably OK for most sites.
+ #
+ min_spare_servers = 3
+ max_spare_servers = 10
+
+ # There may be memory leaks or resource allocation problems with
+ # the server. If so, set this value to 300 or so, so that the
+ # resources will be cleaned up periodically.
+ #
+ # This should only be necessary if there are serious bugs in the
+ # server which have not yet been fixed.
+ #
+ # '0' is a special value meaning 'infinity', or 'the servers never
+ # exit'
+ max_requests_per_server = 0
+}
+
+# MODULE CONFIGURATION
+#
+# The names and configuration of each module is located in this section.
+#
+# After the modules are defined here, they may be referred to by name,
+# in other sections of this configuration file.
+#
+modules {
+ #
+ # Each module has a configuration as follows:
+ #
+ # name [ instance ] {
+ # config_item = value
+ # ...
+ # }
+ #
+ # The 'name' is used to load the 'rlm_name' library
+ # which implements the functionality of the module.
+ #
+ # The 'instance' is optional. To have two different instances
+ # of a module, it first must be referred to by 'name'.
+ # The different copies of the module are then created by
+ # inventing two 'instance' names, e.g. 'instance1' and 'instance2'
+ #
+ # The instance names can then be used in later configuration
+ # INSTEAD of the original 'name'. See the 'radutmp' configuration
+ # below for an example.
+ #
+
+ # PAP module to authenticate users based on their stored password
+ #
+ # As of 1.1.4, the "encryption_scheme" configuration should
+ # no longer be used. For backwards compatibility, it will still
+ # work as before, but we recommend that it is not used.
+ #
+ # The replacement is "auto_header = yes".
+ # For backwards compatibility, the default is "auto_header = no",
+ # but we recommend reviewing your use of the PAP module, based
+ # on the documentation in "man rlm_pap".
+ #
+ # The new capability in this module makes it MUCH easier to
+ # configure the server for multiple crypt/hash schemes, AND
+ # it supports more methods than before. Please read "man rlm_pap"
+ # for more detailed documentation.
+ #
+ pap {
+ auto_header = yes
+ }
+
+ # CHAP module
+ #
+ # To authenticate requests containing a CHAP-Password attribute.
+ #
+ chap {
+ authtype = CHAP
+ }
+
+ # Pluggable Authentication Modules
+ #
+ # For Linux, see:
+ # http://www.kernel.org/pub/linux/libs/pam/index.html
+ #
+ # WARNING: On many systems, the system PAM libraries have
+ # memory leaks! We STRONGLY SUGGEST that you do not
+ # use PAM for authentication, due to those memory leaks.
+ #
+ pam {
+ #
+ # The name to use for PAM authentication.
+ # PAM looks in /etc/pam.d/${pam_auth_name}
+ # for it's configuration. See 'redhat/radiusd-pam'
+ # for a sample PAM configuration file.
+ #
+ # Note that any Pam-Auth attribute set in the 'authorize'
+ # section will over-ride this one.
+ #
+ pam_auth = radiusd
+ }
+
+ # Unix /etc/passwd style authentication
+ #
+ unix {
+ #
+ # Cache /etc/passwd, /etc/shadow, and /etc/group
+ #
+ # The default is to NOT cache them.
+ #
+ # For FreeBSD and NetBSD, you do NOT want to enable
+ # the cache, as it's password lookups are done via a
+ # database, so set this value to 'no'.
+ #
+ # Some systems (e.g. RedHat Linux with pam_pwbd) can
+ # take *seconds* to check a password, when th passwd
+ # file containing 1000's of entries. For those systems,
+ # you should set the cache value to 'yes', and set
+ # the locations of the 'passwd', 'shadow', and 'group'
+ # files, below.
+ #
+ # allowed values: {no, yes}
+ cache = no
+
+ # Reload the cache every 600 seconds (10mins). 0 to disable.
+ cache_reload = 600
+
+ #
+ # Define the locations of the normal passwd, shadow, and
+ # group files.
+ #
+ # 'shadow' is commented out by default, because not all
+ # systems have shadow passwords.
+ #
+ # To force the module to use the system password functions,
+ # instead of reading the files, leave the following entries
+ # commented out.
+ #
+ # This is required for some systems, like FreeBSD,
+ # and Mac OSX.
+ #
+ # passwd = /etc/passwd
+ shadow = /etc/shadow
+ # group = /etc/group
+
+ #
+ # The location of the "wtmp" file.
+ # This should be moved to it's own module soon.
+ #
+ # The only use for 'radlast'. If you don't use
+ # 'radlast', then you can comment out this item.
+ #
+ radwtmp = ${logdir}/radwtmp
+ }
+
+ # Extensible Authentication Protocol
+ #
+ # For all EAP related authentications.
+ # Now in another file, because it is very large.
+ #
+$INCLUDE ${confdir}/eap.conf
+
+ # Microsoft CHAP authentication
+ #
+ # This module supports MS-CHAP and MS-CHAPv2 authentication.
+ # It also enforces the SMB-Account-Ctrl attribute.
+ #
+ mschap {
+ #
+ # As of 0.9, the mschap module does NOT support
+ # reading from /etc/smbpasswd.
+ #
+ # If you are using /etc/smbpasswd, see the 'passwd'
+ # module for an example of how to use /etc/smbpasswd
+
+ # if use_mppe is not set to no mschap will
+ # add MS-CHAP-MPPE-Keys for MS-CHAPv1 and
+ # MS-MPPE-Recv-Key/MS-MPPE-Send-Key for MS-CHAPv2
+ #
+ #use_mppe = no
+
+ # if mppe is enabled require_encryption makes
+ # encryption moderate
+ #
+ #require_encryption = yes
+
+ # require_strong always requires 128 bit key
+ # encryption
+ #
+ #require_strong = yes
+
+ # Windows sends us a username in the form of
+ # DOMAIN\user, but sends the challenge response
+ # based on only the user portion. This hack
+ # corrects for that incorrect behavior.
+ #
+ #with_ntdomain_hack = no
+
+ # The module can perform authentication itself, OR
+ # use a Windows Domain Controller. This configuration
+ # directive tells the module to call the ntlm_auth
+ # program, which will do the authentication, and return
+ # the NT-Key. Note that you MUST have "winbindd" and
+ # "nmbd" running on the local machine for ntlm_auth
+ # to work. See the ntlm_auth program documentation
+ # for details.
+ #
+ # Be VERY careful when editing the following line!
+ #
+ #ntlm_auth = "/path/to/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
+ }
+
+ # Lightweight Directory Access Protocol (LDAP)
+ #
+ # This module definition allows you to use LDAP for
+ # authorization and authentication.
+ #
+ # See doc/rlm_ldap for description of configuration options
+ # and sample authorize{} and authenticate{} blocks
+ #
+ # However, LDAP can be used for authentication ONLY when the
+ # Access-Request packet contains a clear-text User-Password
+ # attribute. LDAP authentication will NOT work for any other
+ # authentication method.
+ #
+ # This means that LDAP servers don't understand EAP. If you
+ # force "Auth-Type = LDAP", and then send the server a
+ # request containing EAP authentication, then authentication
+ # WILL NOT WORK.
+ #
+ # The solution is to use the default configuration, which does
+ # work.
+ #
+ # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We
+ # really can't emphasize this enough.
+ #
+ ldap {
+ server = "ldap.your.domain"
+ # identity = "cn=admin,o=My Org,c=UA"
+ # password = mypass
+ basedn = "o=My Org,c=UA"
+ filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
+ # base_filter = "(objectclass=radiusprofile)"
+
+ # set this to 'yes' to use TLS encrypted connections
+ # to the LDAP database by using the StartTLS extended
+ # operation.
+ # The StartTLS operation is supposed to be used with normal
+ # ldap connections instead of using ldaps (port 689) connections
+ start_tls = no
+
+ # tls_cacertfile = /path/to/cacert.pem
+ # tls_cacertdir = /path/to/ca/dir/
+ # tls_certfile = /path/to/radius.crt
+ # tls_keyfile = /path/to/radius.key
+ # tls_randfile = /path/to/rnd
+ # tls_require_cert = "demand"
+
+ # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA"
+ # profile_attribute = "radiusProfileDn"
+ access_attr = "dialupAccess"
+
+ # Mapping of RADIUS dictionary attributes to LDAP
+ # directory attributes.
+ dictionary_mapping = ${raddbdir}/ldap.attrmap
+
+ ldap_connections_number = 5
+
+ #
+ # NOTICE: The password_header directive is NOT case insensitive
+ #
+ # password_header = "{clear}"
+ #
+ # Set:
+ # password_attribute = nspmPassword
+ #
+ # to get the user's password from a Novell eDirectory
+ # backend. This will work *only if* freeRADIUS is
+ # configured to build with --with-edir option.
+ #
+ #
+ # The server can usually figure this out on its own, and pull
+ # the correct User-Password or NT-Password from the database.
+ #
+ # Note that NT-Passwords MUST be stored as a 32-digit hex
+ # string, and MUST start off with "0x", such as:
+ #
+ # 0x000102030405060708090a0b0c0d0e0f
+ #
+ # Without the leading "0x", NT-Passwords will not work.
+ # This goes for NT-Passwords stored in SQL, too.
+ #
+ # password_attribute = userPassword
+ #
+ # Un-comment the following to disable Novell eDirectory account
+ # policy check and intruder detection. This will work *only if*
+ # FreeRADIUS is configured to build with --with-edir option.
+ #
+ edir_account_policy_check=no
+ #
+ # groupname_attribute = cn
+ # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
+ # groupmembership_attribute = radiusGroupName
+ timeout = 4
+ timelimit = 3
+ net_timeout = 1
+ # compare_check_items = yes
+ # do_xlat = yes
+ # access_attr_used_for_allow = yes
+
+ #
+ # By default, if the packet contains a User-Password,
+ # and no other module is configured to handle the
+ # authentication, the LDAP module sets itself to do
+ # LDAP bind for authentication.
+ #
+ # You can disable this behavior by setting the following
+ # configuration entry to "no".
+ #
+ # allowed values: {no, yes}
+ # set_auth_type = yes
+ }
+
+ # passwd module allows to do authorization via any passwd-like
+ # file and to extract any attributes from these modules
+ #
+ # parameters are:
+ # filename - path to filename
+ # format - format for filename record. This parameters
+ # correlates record in the passwd file and RADIUS
+ # attributes.
+ #
+ # Field marked as '*' is key field. That is, the parameter
+ # with this name from the request is used to search for
+ # the record from passwd file
+ # Attribute marked as '=' is added to reply_itmes instead
+ # of default configure_itmes
+ # Attribute marked as '~' is added to request_items
+ #
+ # Field marked as ',' may contain a comma separated list
+ # of attributes.
+ # authtype - if record found this Auth-Type is used to authenticate
+ # user
+ # hashsize - hashtable size. If 0 or not specified records are not
+ # stored in memory and file is red on every request.
+ # allowmultiplekeys - if few records for every key are allowed
+ # ignorenislike - ignore NIS-related records
+ # delimiter - symbol to use as a field separator in passwd file,
+ # for format ':' symbol is always used. '\0', '\n' are
+ # not allowed
+ #
+
+ # An example configuration for using /etc/smbpasswd.
+ #
+ #passwd etc_smbpasswd {
+ # filename = /etc/smbpasswd
+ # format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::"
+ # authtype = MS-CHAP
+ # hashsize = 100
+ # ignorenislike = no
+ # allowmultiplekeys = no
+ #}
+
+ # Similar configuration, for the /etc/group file. Adds a Group-Name
+ # attribute for every group that the user is member of.
+ #
+ #passwd etc_group {
+ # filename = /etc/group
+ # format = "=Group-Name:::*,User-Name"
+ # hashsize = 50
+ # ignorenislike = yes
+ # allowmultiplekeys = yes
+ # delimiter = ":"
+ #}
+
+ # Realm module, for proxying.
+ #
+ # You can have multiple instances of the realm module to
+ # support multiple realm syntaxs at the same time. The
+ # search order is defined by the order in the authorize and
+ # preacct sections.
+ #
+ # Four config options:
+ # format - must be 'prefix' or 'suffix'
+ # delimiter - must be a single character
+ # ignore_default - set to 'yes' or 'no'
+ # ignore_null - set to 'yes' or 'no'
+ #
+ # ignore_default and ignore_null can be set to 'yes' to prevent
+ # the module from matching against DEFAULT or NULL realms. This
+ # may be useful if you have have multiple instances of the
+ # realm module.
+ #
+ # They both default to 'no'.
+ #
+
+ # 'realm/username'
+ #
+ # Using this entry, IPASS users have their realm set to "IPASS".
+ realm IPASS {
+ format = prefix
+ delimiter = "/"
+ ignore_default = no
+ ignore_null = no
+ }
+
+ # 'username@realm'
+ #
+ realm suffix {
+ format = suffix
+ delimiter = "@"
+ ignore_default = no
+ ignore_null = no
+ }
+
+ # 'username%realm'
+ #
+ realm realmpercent {
+ format = suffix
+ delimiter = "%"
+ ignore_default = no
+ ignore_null = no
+ }
+
+ #
+ # 'domain\user'
+ #
+ realm ntdomain {
+ format = prefix
+ delimiter = "\\"
+ ignore_default = no
+ ignore_null = no
+ }
+
+ # A simple value checking module
+ #
+ # It can be used to check if an attribute value in the request
+ # matches a (possibly multi valued) attribute in the check
+ # items This can be used for example for caller-id
+ # authentication. For the module to run, both the request
+ # attribute and the check items attribute must exist
+ #
+ # i.e.
+ # A user has an ldap entry with 2 radiusCallingStationId
+ # attributes with values "12345678" and "12345679". If we
+ # enable rlm_checkval, then any request which contains a
+ # Calling-Station-Id with one of those two values will be
+ # accepted. Requests with other values for
+ # Calling-Station-Id will be rejected.
+ #
+ # Regular expressions in the check attribute value are allowed
+ # as long as the operator is '=~'
+ #
+ checkval {
+ # The attribute to look for in the request
+ item-name = Calling-Station-Id
+
+ # The attribute to look for in check items. Can be multi valued
+ check-name = Calling-Station-Id
+
+ # The data type. Can be
+ # string,integer,ipaddr,date,abinary,octets
+ data-type = string
+
+ # If set to yes and we dont find the item-name attribute in the
+ # request then we send back a reject
+ # DEFAULT is no
+ #notfound-reject = no
+ }
+
+ # rewrite arbitrary packets. Useful in accounting and authorization.
+ #
+ #
+ # The module can also use the Rewrite-Rule attribute. If it
+ # is set and matches the name of the module instance, then
+ # that module instance will be the only one which runs.
+ #
+ # Also if new_attribute is set to yes then a new attribute
+ # will be created containing the value replacewith and it
+ # will be added to searchin (packet, reply, proxy, proxy_reply or config).
+ # searchfor,ignore_case and max_matches will be ignored in that case.
+ #
+ # Backreferences are supported: %{0} will contain the string the whole match
+ # and %{1} to %{8} will contain the contents of the 1st to the 8th parentheses
+ #
+ # If max_matches is greater than one the backreferences will correspond to the
+ # first match
+
+ #
+ #attr_rewrite sanecallerid {
+ # attribute = Called-Station-Id
+ # may be "packet", "reply", "proxy", "proxy_reply" or "config"
+ # searchin = packet
+ # searchfor = "[+ ]"
+ # replacewith = ""
+ # ignore_case = no
+ # new_attribute = no
+ # max_matches = 10
+ # ## If set to yes then the replace string will be appended to the original string
+ # append = no
+ #}
+
+ # Preprocess the incoming RADIUS request, before handing it off
+ # to other modules.
+ #
+ # This module processes the 'huntgroups' and 'hints' files.
+ # In addition, it re-writes some weird attributes created
+ # by some NASes, and converts the attributes into a form which
+ # is a little more standard.
+ #
+ preprocess {
+ huntgroups = ${confdir}/huntgroups
+ hints = ${confdir}/hints
+
+ # This hack changes Ascend's wierd port numberings
+ # to standard 0-??? port numbers so that the "+" works
+ # for IP address assignments.
+ with_ascend_hack = no
+ ascend_channels_per_line = 23
+
+ # Windows NT machines often authenticate themselves as
+ # NT_DOMAIN\username
+ #
+ # If this is set to 'yes', then the NT_DOMAIN portion
+ # of the user-name is silently discarded.
+ #
+ # This configuration entry SHOULD NOT be used.
+ # See the "realms" module for a better way to handle
+ # NT domains.
+ with_ntdomain_hack = no
+
+ # Specialix Jetstream 8500 24 port access server.
+ #
+ # If the user name is 10 characters or longer, a "/"
+ # and the excess characters after the 10th are
+ # appended to the user name.
+ #
+ # If you're not running that NAS, you don't need
+ # this hack.
+ with_specialix_jetstream_hack = no
+
+ # Cisco (and Quintum in Cisco mode) sends it's VSA attributes
+ # with the attribute name *again* in the string, like:
+ #
+ # H323-Attribute = "h323-attribute=value".
+ #
+ # If this configuration item is set to 'yes', then
+ # the redundant data in the the attribute text is stripped
+ # out. The result is:
+ #
+ # H323-Attribute = "value"
+ #
+ # If you're not running a Cisco or Quintum NAS, you don't
+ # need this hack.
+ with_cisco_vsa_hack = no
+ }
+
+ # Livingston-style 'users' file
+ #
+ files {
+ usersfile = ${confdir}/users
+ acctusersfile = ${confdir}/acct_users
+ preproxy_usersfile = ${confdir}/preproxy_users
+
+ # If you want to use the old Cistron 'users' file
+ # with FreeRADIUS, you should change the next line
+ # to 'compat = cistron'. You can the copy your 'users'
+ # file from Cistron.
+ compat = no
+ }
+
+ # Write a detailed log of all accounting records received.
+ #
+ detail {
+ # Note that we do NOT use NAS-IP-Address here, as
+ # that attribute MAY BE from the originating NAS, and
+ # NOT from the proxy which actually sent us the
+ # request. The Client-IP-Address attribute is ALWAYS
+ # the address of the client which sent us the
+ # request.
+ #
+ # The following line creates a new detail file for
+ # every radius client (by IP address or hostname).
+ # In addition, a new detail file is created every
+ # day, so that the detail file doesn't have to go
+ # through a 'log rotation'
+ #
+ # If your detail files are large, you may also want
+ # to add a ':%H' (see doc/variables.txt) to the end
+ # of it, to create a new detail file every hour, e.g.:
+ #
+ # ..../detail-%Y%m%d:%H
+ #
+ # This will create a new detail file for every hour.
+ #
+ detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
+
+ #
+ # The Unix-style permissions on the 'detail' file.
+ #
+ # The detail file often contains secret or private
+ # information about users. So by keeping the file
+ # permissions restrictive, we can prevent unwanted
+ # people from seeing that information.
+ detailperm = 0600
+
+ #
+ # Certain attributes such as User-Password may be
+ # "sensitive", so they should not be printed in the
+ # detail file. This section lists the attributes
+ # that should be suppressed.
+ #
+ # The attributes should be listed one to a line.
+ #
+ #suppress {
+ # User-Password
+ #}
+ }
+
+ #
+ # Many people want to log authentication requests.
+ # Rather than modifying the server core to print out more
+ # messages, we can use a different instance of the 'detail'
+ # module, to log the authentication requests to a file.
+ #
+ # You will also need to un-comment the 'auth_log' line
+ # in the 'authorize' section, below.
+ #
+ # detail auth_log {
+ # detailfile = ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d
+
+ #
+ # This MUST be 0600, otherwise anyone can read
+ # the users passwords!
+ # detailperm = 0600
+ # }
+
+ #
+ # This module logs authentication reply packets sent
+ # to a NAS. Both Access-Accept and Access-Reject packets
+ # are logged.
+ #
+ # You will also need to un-comment the 'reply_log' line
+ # in the 'post-auth' section, below.
+ #
+ # detail reply_log {
+ # detailfile = ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d
+
+ #
+ # This MUST be 0600, otherwise anyone can read
+ # the users passwords!
+ # detailperm = 0600
+ # }
+
+ #
+ # This module logs packets proxied to a home server.
+ #
+ # You will also need to un-comment the 'pre_proxy_log' line
+ # in the 'pre-proxy' section, below.
+ #
+ # detail pre_proxy_log {
+ # detailfile = ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d
+
+ #
+ # This MUST be 0600, otherwise anyone can read
+ # the users passwords!
+ # detailperm = 0600
+ # }
+
+ #
+ # This module logs response packets from a home server.
+ #
+ # You will also need to un-comment the 'post_proxy_log' line
+ # in the 'post-proxy' section, below.
+ #
+ # detail post_proxy_log {
+ # detailfile = ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d
+
+ #
+ # This MUST be 0600, otherwise anyone can read
+ # the users passwords!
+ # detailperm = 0600
+ # }
+
+ #
+ # The rlm_sql_log module appends the SQL queries in a log
+ # file which is read later by the radsqlrelay program.
+ #
+ # This module only performs the dynamic expansion of the
+ # variables found in the SQL statements. No operation is
+ # executed on the database server. (this could be done
+ # later by an external program) That means the module is
+ # useful only with non-"SELECT" statements.
+ #
+ # See rlm_sql_log(5) manpage.
+ #
+# sql_log {
+# path = ${radacctdir}/sql-relay
+# acct_table = "radacct"
+# postauth_table = "radpostauth"
+#
+# Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
+# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
+# AcctSessionTime, AcctTerminateCause) VALUES \
+# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
+# '%{Framed-IP-Address}', '%S', '0', '0', '');"
+# Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
+# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
+# AcctSessionTime, AcctTerminateCause) VALUES \
+# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
+# '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \
+# '%{Acct-Terminate-Cause}');"
+# Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
+# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
+# AcctSessionTime, AcctTerminateCause) VALUES \
+# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
+# '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');"
+#
+# Post-Auth = "INSERT INTO ${postauth_table} \
+# (user, pass, reply, date) VALUES \
+# ('%{User-Name}', '%{User-Password:-Chap-Password}', \
+# '%{reply:Packet-Type}', '%S');"
+# }
+
+ #
+ # Create a unique accounting session Id. Many NASes re-use
+ # or repeat values for Acct-Session-Id, causing no end of
+ # confusion.
+ #
+ # This module will add a (probably) unique session id
+ # to an accounting packet based on the attributes listed
+ # below found in the packet. See doc/rlm_acct_unique for
+ # more information.
+ #
+ acct_unique {
+ key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
+ }
+
+
+ # Include another file that has the SQL-related configuration.
+ # This is another file only because it tends to be big.
+ #
+ # The following configuration file is for use with MySQL.
+ #
+ # For Postgresql, use: ${confdir}/postgresql.conf
+ # For MS-SQL, use: ${confdir}/mssql.conf
+ # For Oracle, use: ${confdir}/oraclesql.conf
+ #
+ $INCLUDE ${confdir}/sql.conf
+
+
+ # For Cisco VoIP specific accounting with Postgresql,
+ # use: ${confdir}/pgsql-voip.conf
+ #
+ # You will also need the sql schema from:
+ # src/billing/cisco_h323_db_schema-postgres.sql
+ # Note: This config can be use AS WELL AS the standard sql
+ # config if you need SQL based Auth
+
+
+ # Write a 'utmp' style file, of which users are currently
+ # logged in, and where they've logged in from.
+ #
+ # This file is used mainly for Simultaneous-Use checking,
+ # and also 'radwho', to see who's currently logged in.
+ #
+ radutmp {
+ # Where the file is stored. It's not a log file,
+ # so it doesn't need rotating.
+ #
+ filename = ${logdir}/radutmp
+
+ # The field in the packet to key on for the
+ # 'user' name, If you have other fields which you want
+ # to use to key on to control Simultaneous-Use,
+ # then you can use them here.
+ #
+ # Note, however, that the size of the field in the
+ # 'utmp' data structure is small, around 32
+ # characters, so that will limit the possible choices
+ # of keys.
+ #
+ # You may want instead: %{Stripped-User-Name:-%{User-Name}}
+ username = %{User-Name}
+
+
+ # Whether or not we want to treat "user" the same
+ # as "USER", or "User". Some systems have problems
+ # with case sensitivity, so this should be set to
+ # 'no' to enable the comparisons of the key attribute
+ # to be case insensitive.
+ #
+ case_sensitive = yes
+
+ # Accounting information may be lost, so the user MAY
+ # have logged off of the NAS, but we haven't noticed.
+ # If so, we can verify this information with the NAS,
+ #
+ # If we want to believe the 'utmp' file, then this
+ # configuration entry can be set to 'no'.
+ #
+ check_with_nas = yes
+
+ # Set the file permissions, as the contents of this file
+ # are usually private.
+ perm = 0600
+
+ callerid = "yes"
+ }
+
+ # "Safe" radutmp - does not contain caller ID, so it can be
+ # world-readable, and radwho can work for normal users, without
+ # exposing any information that isn't already exposed by who(1).
+ #
+ # This is another 'instance' of the radutmp module, but it is given
+ # then name "sradutmp" to identify it later in the "accounting"
+ # section.
+ radutmp sradutmp {
+ filename = ${logdir}/sradutmp
+ perm = 0644
+ callerid = "no"
+ }
+
+ # attr_filter - filters the attributes received in replies from
+ # proxied servers, to make sure we send back to our RADIUS client
+ # only allowed attributes.
+ attr_filter {
+ attrsfile = ${confdir}/attrs
+ }
+
+ # counter module:
+ # This module takes an attribute (count-attribute).
+ # It also takes a key, and creates a counter for each unique
+ # key. The count is incremented when accounting packets are
+ # received by the server. The value of the increment depends
+ # on the attribute type.
+ # If the attribute is Acct-Session-Time or of an integer type we add the
+ # value of the attribute. If it is anything else we increase the
+ # counter by one.
+ #
+ # The 'reset' parameter defines when the counters are all reset to
+ # zero. It can be hourly, daily, weekly, monthly or never.
+ #
+ # hourly: Reset on 00:00 of every hour
+ # daily: Reset on 00:00:00 every day
+ # weekly: Reset on 00:00:00 on sunday
+ # monthly: Reset on 00:00:00 of the first day of each month
+ #
+ # It can also be user defined. It should be of the form:
+ # num[hdwm] where:
+ # h: hours, d: days, w: weeks, m: months
+ # If the letter is ommited days will be assumed. In example:
+ # reset = 10h (reset every 10 hours)
+ # reset = 12 (reset every 12 days)
+ #
+ #
+ # The check-name attribute defines an attribute which will be
+ # registered by the counter module and can be used to set the
+ # maximum allowed value for the counter after which the user
+ # is rejected.
+ # Something like:
+ #
+ # DEFAULT Max-Daily-Session := 36000
+ # Fall-Through = 1
+ #
+ # You should add the counter module in the instantiate
+ # section so that it registers check-name before the files
+ # module reads the users file.
+ #
+ # If check-name is set and the user is to be rejected then we
+ # send back a Reply-Message and we log a Failure-Message in
+ # the radius.log
+ # If the count attribute is Acct-Session-Time then on each login
+ # we send back the remaining online time as a Session-Timeout attribute
+ #
+ # The counter-name can also be used instead of using the check-name
+ # like below:
+ #
+ # DEFAULT Daily-Session-Time > 3600, Auth-Type = Reject
+ # Reply-Message = "You've used up more than one hour today"
+ #
+ # The allowed-servicetype attribute can be used to only take
+ # into account specific sessions. For example if a user first
+ # logs in through a login menu and then selects ppp there will
+ # be two sessions. One for Login-User and one for Framed-User
+ # service type. We only need to take into account the second one.
+ #
+ # The module should be added in the instantiate, authorize and
+ # accounting sections. Make sure that in the authorize
+ # section it comes after any module which sets the
+ # 'check-name' attribute.
+ #
+ counter daily {
+ filename = ${raddbdir}/db.daily
+ key = User-Name
+ count-attribute = Acct-Session-Time
+ reset = daily
+ counter-name = Daily-Session-Time
+ check-name = Max-Daily-Session
+ allowed-servicetype = Framed-User
+ cache-size = 5000
+ }
+
+ #
+ # This module is an SQL enabled version of the counter module.
+ #
+ # Rather than maintaining seperate (GDBM) databases of
+ # accounting info for each counter, this module uses the data
+ # stored in the raddacct table by the sql modules. This
+ # module NEVER does any database INSERTs or UPDATEs. It is
+ # totally dependent on the SQL module to process Accounting
+ # packets.
+ #
+ # The 'sqlmod_inst' parameter holds the instance of the sql
+ # module to use when querying the SQL database. Normally it
+ # is just "sql". If you define more and one SQL module
+ # instance (usually for failover situations), you can
+ # specify which module has access to the Accounting Data
+ # (radacct table).
+ #
+ # The 'reset' parameter defines when the counters are all
+ # reset to zero. It can be hourly, daily, weekly, monthly or
+ # never. It can also be user defined. It should be of the
+ # form:
+ # num[hdwm] where:
+ # h: hours, d: days, w: weeks, m: months
+ # If the letter is ommited days will be assumed. In example:
+ # reset = 10h (reset every 10 hours)
+ # reset = 12 (reset every 12 days)
+ #
+ # The 'key' parameter specifies the unique identifier for the
+ # counter records (usually 'User-Name').
+ #
+ # The 'query' parameter specifies the SQL query used to get
+ # the current Counter value from the database. There are 3
+ # parameters that can be used in the query:
+ # %k 'key' parameter
+ # %b unix time value of beginning of reset period
+ # %e unix time value of end of reset period
+ #
+ # The 'check-name' parameter is the name of the 'check'
+ # attribute to use to access the counter in the 'users' file
+ # or SQL radcheck or radcheckgroup tables.
+ #
+ # The 'reply-name' parameter is the name the the attribute
+ # which holds the time remaining for the user. This is normally
+ # Session-Timeout, which makes the NAS disconnect the user
+ # once the session time is up.
+ #
+ # DEFAULT Max-Daily-Session > 3600, Auth-Type = Reject
+ # Reply-Message = "You've used up more than one hour today"
+ #
+ sqlcounter dailycounter {
+ counter-name = Daily-Session-Time
+ check-name = Max-Daily-Session
+ reply-name = Session-Timeout
+ sqlmod-inst = sql
+ key = User-Name
+ reset = daily
+
+ # This query properly handles calls that span from the
+ # previous reset period into the current period but
+ # involves more work for the SQL server than those
+ # below
+ # For mysql:
+ query = "SELECT SUM(AcctSessionTime - \
+ GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
+ FROM radacct WHERE UserName='%{%k}' AND \
+ UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
+
+ # For postgresql:
+# query = "SELECT SUM(AcctSessionTime - \
+# GREATER((%b - AcctStartTime::ABSTIME::INT4), 0)) \
+# FROM radacct WHERE UserName='%{%k}' AND \
+# AcctStartTime::ABSTIME::INT4 + AcctSessionTime > '%b'"
+
+ # This query ignores calls that started in a previous
+ # reset period and continue into into this one. But it
+ # is a little easier on the SQL server
+ # For mysql:
+# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
+# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')"
+
+ # For postgresql:
+# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
+# UserName='%{%k}' AND AND AcctStartTime::ABSTIME::INT4 > '%b'"
+
+ # This query is the same as above, but demonstrates an
+ # additional counter parameter '%e' which is the
+ # timestamp for the end of the period
+ # For mysql:
+# query = "SELECT SUM(AcctSessionTime) FROM radacct \
+# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \
+# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')"
+
+ # For postgresql:
+# query = "SELECT SUM(AcctSessionTime) FROM radacct \
+# WHERE UserName='%{%k}' AND AcctStartTime::ABSTIME::INT4 \
+# BETWEEN '%b' AND '%e'"
+ }
+
+ sqlcounter monthlycounter {
+ counter-name = Monthly-Session-Time
+ check-name = Max-Monthly-Session
+ reply-name = Session-Timeout
+ sqlmod-inst = sql
+ key = User-Name
+ reset = monthly
+
+ # This query properly handles calls that span from the
+ # previous reset period into the current period but
+ # involves more work for the SQL server than those
+ # below
+ # The same notes above about the differences between mysql
+ # versus postgres queries apply here.
+ query = "SELECT SUM(AcctSessionTime - \
+ GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
+ FROM radacct WHERE UserName='%{%k}' AND \
+ UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
+
+ # This query ignores calls that started in a previous
+ # reset period and continue into into this one. But it
+ # is a little easier on the SQL server
+# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
+# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')"
+
+ # This query is the same as above, but demonstrates an
+ # additional counter parameter '%e' which is the
+ # timestamp for the end of the period
+# query = "SELECT SUM(AcctSessionTime) FROM radacct \
+# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \
+# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')"
+ }
+
+ #
+ # The "always" module is here for debugging purposes. Each
+ # instance simply returns the same result, always, without
+ # doing anything.
+ always fail {
+ rcode = fail
+ }
+ always reject {
+ rcode = reject
+ }
+ always ok {
+ rcode = ok
+ simulcount = 0
+ mpp = no
+ }
+
+ #
+ # The 'expression' module currently has no configuration.
+ #
+ # This module is useful only for 'xlat'. To use it,
+ # put 'exec' into the 'instantiate' section. You can then
+ # do dynamic translation of attributes like:
+ #
+ # Attribute-Name = `%{expr:2 + 3 + %{exec: uid -u}}`
+ #
+ # The value of the attribute will be replaced with the output
+ # of the program which is executed. Due to RADIUS protocol
+ # limitations, any output over 253 bytes will be ignored.
+ expr {
+ }
+
+ #
+ # The 'digest' module currently has no configuration.
+ #
+ # "Digest" authentication against a Cisco SIP server.
+ # See 'doc/rfc/draft-sterman-aaa-sip-00.txt' for details
+ # on performing digest authentication for Cisco SIP servers.
+ #
+ digest {
+ }
+
+ #
+ # Execute external programs
+ #
+ # This module is useful only for 'xlat'. To use it,
+ # put 'exec' into the 'instantiate' section. You can then
+ # do dynamic translation of attributes like:
+ #
+ # Attribute-Name = `%{exec:/path/to/program args}`
+ #
+ # The value of the attribute will be replaced with the output
+ # of the program which is executed. Due to RADIUS protocol
+ # limitations, any output over 253 bytes will be ignored.
+ #
+ # The RADIUS attributes from the user request will be placed
+ # into environment variables of the executed program, as
+ # described in 'doc/variables.txt'
+ #
+ exec {
+ wait = yes
+ input_pairs = request
+ }
+
+ #
+ # This is a more general example of the execute module.
+ #
+ # This one is called "echo".
+ #
+ # Attribute-Name = `%{echo:/path/to/program args}`
+ #
+ # If you wish to execute an external program in more than
+ # one section (e.g. 'authorize', 'pre_proxy', etc), then it
+ # is probably best to define a different instance of the
+ # 'exec' module for every section.
+ #
+ exec echo {
+ #
+ # Wait for the program to finish.
+ #
+ # If we do NOT wait, then the program is "fire and
+ # forget", and any output attributes from it are ignored.
+ #
+ # If we are looking for the program to output
+ # attributes, and want to add those attributes to the
+ # request, then we MUST wait for the program to
+ # finish, and therefore set 'wait=yes'
+ #
+ # allowed values: {no, yes}
+ wait = yes
+
+ #
+ # The name of the program to execute, and it's
+ # arguments. Dynamic translation is done on this
+ # field, so things like the following example will
+ # work.
+ #
+ program = "/bin/echo %{User-Name}"
+
+ #
+ # The attributes which are placed into the
+ # environment variables for the program.
+ #
+ # Allowed values are:
+ #
+ # request attributes from the request
+ # config attributes from the configuration items list
+ # reply attributes from the reply
+ # proxy-request attributes from the proxy request
+ # proxy-reply attributes from the proxy reply
+ #
+ # Note that some attributes may not exist at some
+ # stages. e.g. There may be no proxy-reply
+ # attributes if this module is used in the
+ # 'authorize' section.
+ #
+ input_pairs = request
+
+ #
+ # Where to place the output attributes (if any) from
+ # the executed program. The values allowed, and the
+ # restrictions as to availability, are the same as
+ # for the input_pairs.
+ #
+ output_pairs = reply
+
+ #
+ # When to execute the program. If the packet
+ # type does NOT match what's listed here, then
+ # the module does NOT execute the program.
+ #
+ # For a list of allowed packet types, see
+ # the 'dictionary' file, and look for VALUEs
+ # of the Packet-Type attribute.
+ #
+ # By default, the module executes on ANY packet.
+ # Un-comment out the following line to tell the
+ # module to execute only if an Access-Accept is
+ # being sent to the NAS.
+ #
+ #packet_type = Access-Accept
+ }
+
+ # Do server side ip pool management. Should be added in post-auth and
+ # accounting sections.
+ #
+ # The module also requires the existance of the Pool-Name
+ # attribute. That way the administrator can add the Pool-Name
+ # attribute in the user profiles and use different pools
+ # for different users. The Pool-Name attribute is a *check* item not
+ # a reply item.
+ #
+ # Example:
+ # radiusd.conf: ippool students { [...] }
+ # users file : DEFAULT Group == students, Pool-Name := "students"
+ #
+ # ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST *********
+ # ********* THEN ERASE THE DB FILES *********
+ #
+ ippool main_pool {
+
+ # range-start,range-stop: The start and end ip
+ # addresses for the ip pool
+ range-start = 192.168.1.1
+ range-stop = 192.168.3.254
+
+ # netmask: The network mask used for the ip's
+ netmask = 255.255.255.0
+
+ # cache-size: The gdbm cache size for the db
+ # files. Should be equal to the number of ip's
+ # available in the ip pool
+ cache-size = 800
+
+ # session-db: The main db file used to allocate ip's to clients
+ session-db = ${raddbdir}/db.ippool
+
+ # ip-index: Helper db index file used in multilink
+ ip-index = ${raddbdir}/db.ipindex
+
+ # override: Will this ippool override a Framed-IP-Address already set
+ override = no
+
+ # maximum-timeout: If not zero specifies the maximum time in seconds an
+ # entry may be active. Default: 0
+ maximum-timeout = 0
+ }
+
+ # $INCLUDE ${confdir}/sqlippool.conf
+ # $INCLUDE ${confdir}/postgresqlippool.conf
+
+ # OTP token support. Not included by default.
+ # $INCLUDE ${confdir}/otp.conf
+
+}
+
+# Instantiation
+#
+# This section orders the loading of the modules. Modules
+# listed here will get loaded BEFORE the later sections like
+# authorize, authenticate, etc. get examined.
+#
+# This section is not strictly needed. When a section like
+# authorize refers to a module, it's automatically loaded and
+# initialized. However, some modules may not be listed in any
+# of the following sections, so they can be listed here.
+#
+# Also, listing modules here ensures that you have control over
+# the order in which they are initalized. If one module needs
+# something defined by another module, you can list them in order
+# here, and ensure that the configuration will be OK.
+#
+instantiate {
+ #
+ # Allows the execution of external scripts.
+ # The entire command line (and output) must fit into 253 bytes.
+ #
+ # e.g. Framed-Pool = `%{exec:/bin/echo foo}`
+ exec
+
+ #
+ # The expression module doesn't do authorization,
+ # authentication, or accounting. It only does dynamic
+ # translation, of the form:
+ #
+ # Session-Timeout = `%{expr:2 + 3}`
+ #
+ # So the module needs to be instantiated, but CANNOT be
+ # listed in any other section. See 'doc/rlm_expr' for
+ # more information.
+ #
+ expr
+
+ #
+ # We add the counter module here so that it registers
+ # the check-name attribute before any module which sets
+ # it
+# daily
+}
+
+# Authorization. First preprocess (hints and huntgroups files),
+# then realms, and finally look in the "users" file.
+#
+# The order of the realm modules will determine the order that
+# we try to find a matching realm.
+#
+# Make *sure* that 'preprocess' comes before any realm if you
+# need to setup hints for the remote radius server
+authorize {
+ #
+ # The preprocess module takes care of sanitizing some bizarre
+ # attributes in the request, and turning them into attributes
+ # which are more standard.
+ #
+ # It takes care of processing the 'raddb/hints' and the
+ # 'raddb/huntgroups' files.
+ #
+ # It also adds the %{Client-IP-Address} attribute to the request.
+ preprocess
+
+ #
+ # If you want to have a log of authentication requests,
+ # un-comment the following line, and the 'detail auth_log'
+ # section, above.
+# auth_log
+
+# attr_filter
+
+ #
+ # The chap module will set 'Auth-Type := CHAP' if we are
+ # handling a CHAP request and Auth-Type has not already been set
+ chap
+
+ #
+ # If the users are logging in with an MS-CHAP-Challenge
+ # attribute for authentication, the mschap module will find
+ # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
+ # to the request, which will cause the server to then use
+ # the mschap module for authentication.
+ mschap
+
+ #
+ # If you have a Cisco SIP server authenticating against
+ # FreeRADIUS, uncomment the following line, and the 'digest'
+ # line in the 'authenticate' section.
+# digest
+
+ #
+ # Look for IPASS style 'realm/', and if not found, look for
+ # '@realm', and decide whether or not to proxy, based on
+ # that.
+# IPASS
+
+ #
+ # If you are using multiple kinds of realms, you probably
+ # want to set "ignore_null = yes" for all of them.
+ # Otherwise, when the first style of realm doesn't match,
+ # the other styles won't be checked.
+ #
+ suffix
+# ntdomain
+
+ #
+ # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP
+ # authentication.
+ #
+ # It also sets the EAP-Type attribute in the request
+ # attribute list to the EAP type from the packet.
+ eap
+
+ #
+ # Read the 'users' file
+ files
+
+ #
+ # Look in an SQL database. The schema of the database
+ # is meant to mirror the "users" file.
+ #
+ # See "Authorization Queries" in sql.conf
+# sql
+
+ #
+ # If you are using /etc/smbpasswd, and are also doing
+ # mschap authentication, the un-comment this line, and
+ # configure the 'etc_smbpasswd' module, above.
+# etc_smbpasswd
+
+ #
+ # The ldap module will set Auth-Type to LDAP if it has not
+ # already been set
+# ldap
+
+ #
+ # Enforce daily limits on time spent logged in.
+# daily
+
+ #
+ # Use the checkval module
+# checkval
+
+ #
+ # As of 1.1.4, you should list "pap" last in this section.
+ # See "man rlm_pap" for more information.
+ pap
+}
+
+
+# Authentication.
+#
+#
+# This section lists which modules are available for authentication.
+# Note that it does NOT mean 'try each module in order'. It means
+# that a module from the 'authorize' section adds a configuration
+# attribute 'Auth-Type := FOO'. That authentication type is then
+# used to pick the apropriate module from the list below.
+#
+
+# In general, you SHOULD NOT set the Auth-Type attribute. The server
+# will figure it out on its own, and will do the right thing. The
+# most common side effect of erroneously setting the Auth-Type
+# attribute is that one authentication method will work, but the
+# others will not.
+#
+# The common reasons to set the Auth-Type attribute by hand
+# is to either forcibly reject the user, or forcibly accept him.
+#
+authenticate {
+ #
+ # PAP authentication, when a back-end database listed
+ # in the 'authorize' section supplies a password. The
+ # password can be clear-text, or encrypted.
+ Auth-Type PAP {
+ pap
+ }
+
+ #
+ # Most people want CHAP authentication
+ # A back-end database listed in the 'authorize' section
+ # MUST supply a CLEAR TEXT password. Encrypted passwords
+ # won't work.
+ Auth-Type CHAP {
+ chap
+ }
+
+ #
+ # MSCHAP authentication.
+ Auth-Type MS-CHAP {
+ mschap
+ }
+
+ #
+ # If you have a Cisco SIP server authenticating against
+ # FreeRADIUS, uncomment the following line, and the 'digest'
+ # line in the 'authorize' section.
+# digest
+
+ #
+ # Pluggable Authentication Modules.
+# pam
+
+ #
+ # See 'man getpwent' for information on how the 'unix'
+ # module checks the users password. Note that packets
+ # containing CHAP-Password attributes CANNOT be authenticated
+ # against /etc/passwd! See the FAQ for details.
+ #
+ unix
+
+ # Uncomment it if you want to use ldap for authentication
+ #
+ # Note that this means "check plain-text password against
+ # the ldap database", which means that EAP won't work,
+ # as it does not supply a plain-text password.
+# Auth-Type LDAP {
+# ldap
+# }
+
+ #
+ # Allow EAP authentication.
+ eap
+}
+
+
+#
+# Pre-accounting. Decide which accounting type to use.
+#
+preacct {
+ preprocess
+
+ #
+ # Ensure that we have a semi-unique identifier for every
+ # request, and many NAS boxes are broken.
+ acct_unique
+
+ #
+ # Look for IPASS-style 'realm/', and if not found, look for
+ # '@realm', and decide whether or not to proxy, based on
+ # that.
+ #
+ # Accounting requests are generally proxied to the same
+ # home server as authentication requests.
+# IPASS
+ suffix
+# ntdomain
+
+ #
+ # Read the 'acct_users' file
+ files
+}
+
+#
+# Accounting. Log the accounting data.
+#
+accounting {
+ #
+ # Create a 'detail'ed log of the packets.
+ # Note that accounting requests which are proxied
+ # are also logged in the detail file.
+ detail
+# daily
+
+ # Update the wtmp file
+ #
+ # If you don't use "radlast", you can delete this line.
+ unix
+
+ #
+ # For Simultaneous-Use tracking.
+ #
+ # Due to packet losses in the network, the data here
+ # may be incorrect. There is little we can do about it.
+ radutmp
+# sradutmp
+
+ # Return an address to the IP Pool when we see a stop record.
+# main_pool
+# sqlippool
+
+ #
+ # Log traffic to an SQL database.
+ #
+ # See "Accounting queries" in sql.conf
+# sql
+
+ #
+ # Instead of sending the query to the SQL server,
+ # write it into a log file.
+ #
+# sql_log
+
+ # Cisco VoIP specific bulk accounting
+# pgsql-voip
+
+}
+
+
+# Session database, used for checking Simultaneous-Use. Either the radutmp
+# or rlm_sql module can handle this.
+# The rlm_sql module is *much* faster
+session {
+ radutmp
+
+ #
+ # See "Simultaneous Use Checking Querie" in sql.conf
+# sql
+}
+
+
+# Post-Authentication
+# Once we KNOW that the user has been authenticated, there are
+# additional steps we can take.
+post-auth {
+ # Get an address from the IP Pool.
+# main_pool
+# sqlippool
+
+ #
+ # If you want to have a log of authentication replies,
+ # un-comment the following line, and the 'detail reply_log'
+ # section, above.
+# reply_log
+
+ #
+ # After authenticating the user, do another SQL query.
+ #
+ # See "Authentication Logging Queries" in sql.conf
+# sql
+
+ #
+ # Instead of sending the query to the SQL server,
+ # write it into a log file.
+ #
+# sql_log
+
+ #
+ # Un-comment the following if you have set
+ # 'edir_account_policy_check = yes' in the ldap module sub-section of
+ # the 'modules' section.
+ #
+# ldap
+ #
+ # Access-Reject packets are sent through the REJECT sub-section of the
+ # post-auth section.
+ # Uncomment the following and set the module name to the ldap instance
+ # name if you have set 'edir_account_policy_check = yes' in the ldap
+ # module sub-section of the 'modules' section.
+ #
+# Post-Auth-Type REJECT {
+# insert-module-name-here
+# }
+
+}
+
+#
+# When the server decides to proxy a request to a home server,
+# the proxied request is first passed through the pre-proxy
+# stage. This stage can re-write the request, or decide to
+# cancel the proxy.
+#
+# Only a few modules currently have this method.
+#
+pre-proxy {
+# attr_rewrite
+
+ # Uncomment the following line if you want to change attributes
+ # as defined in the preproxy_users file.
+# files
+
+ # If you want to have a log of packets proxied to a home
+ # server, un-comment the following line, and the
+ # 'detail pre_proxy_log' section, above.
+# pre_proxy_log
+}
+
+#
+# When the server receives a reply to a request it proxied
+# to a home server, the request may be massaged here, in the
+# post-proxy stage.
+#
+post-proxy {
+
+ # If you want to have a log of replies from a home server,
+ # un-comment the following line, and the 'detail post_proxy_log'
+ # section, above.
+# post_proxy_log
+
+# attr_rewrite
+
+ # Uncomment the following line if you want to filter replies from
+ # remote proxies based on the rules defined in the 'attrs' file.
+
+# attr_filter
+
+ #
+ # If you are proxying LEAP, you MUST configure the EAP
+ # module, and you MUST list it here, in the post-proxy
+ # stage.
+ #
+ # You MUST also use the 'nostrip' option in the 'realm'
+ # configuration. Otherwise, the User-Name attribute
+ # in the proxied request will not match the user name
+ # hidden inside of the EAP packet, and the end server will
+ # reject the EAP request.
+ #
+ eap
+}
projects / carnet-upgrade.git / blobdiff