Remove unused configs.
[carnet-upgrade.git] / files / etc / init.d / slapd
diff --git a/files/etc/init.d/slapd b/files/etc/init.d/slapd
deleted file mode 100755 (executable)
index 53b18fc..0000000
+++ /dev/null
@@ -1,256 +0,0 @@
-#! /bin/sh
-
-# Kill me on all errors
-set -e
-
-# Stop processing if slapd is not there
-[ -x /usr/sbin/slapd ] || exit 0
-
-# Set default values
-DB_RECOVER_CMD=db4.2_recover
-
-# Source the init script configuration
-if [ -f "/etc/default/slapd" ]; then
-       . /etc/default/slapd
-fi
-
-# Load the default location of the slapd config file
-if [ -z "$SLAPD_CONF" ]; then
-       SLAPD_CONF="/etc/ldap/slapd.conf"
-else
-       SLAPD_OPTIONS="-f $SLAPD_CONF $SLAPD_OPTIONS"
-       SLURPD_OPTIONS="-f $SLAPD_CONF $SLURPD_OPTIONS"
-fi
-
-# Stop processing if the config file is not there
-if [ ! -r "$SLAPD_CONF" ]; then
-  cat <<EOF >&2
-No configuration file was found for slapd at $SLAPD_CONF.
-If you have moved the slapd configuration file please modify
-/etc/default/slapd to reflect this.  If you chose to not
-configure slapd during installation then you need to do so
-prior to attempting to start slapd.
-An example slapd.conf is in /usr/share/slapd
-EOF
-  exit 0 # Should this be 1?
-fi
-
-# Figure out some default settings
-# Check wether slurpd should get started
-if [ "$SLURPD_START" != "yes" ] && [ "$SLURPD_START" != "no" ]; then
-       if grep -q '^replica' "$SLAPD_CONF" > /dev/null 2>&1 ; then
-               SLURPD_START=yes
-       else
-               SLURPD_START=no
-       fi
-fi
-       
-# Find out the name of slapd's pid file
-if [ -z "$SLAPD_PIDFILE" ]; then
-       SLAPD_PIDFILE=`sed -ne 's/^pidfile[[:space:]]\+\(.\+\)/\1/p' \
-               "$SLAPD_CONF"`
-fi
-
-# XXX: Breaks upgrading if there is no pidfile (invoke-rc.d stop will fail)
-# -- Torsten
-if [ -z "$SLAPD_PIDFILE" ]; then
-       cat <<EOF >&2
-The pidfile for slapd is neither specified in "$SLAPD_CONF" nor
-in /etc/default/slapd. Consequently, slapd will not be started.
-EOF
-       exit 1
-fi
-
-# Pass the user and group to run under to slapd
-if [  "$SLAPD_USER" ]; then
-       SLAPD_OPTIONS="-u $SLAPD_USER $SLAPD_OPTIONS"
-fi
-
-if [ "$SLAPD_GROUP" ]; then
-       SLAPD_OPTIONS="-g $SLAPD_GROUP $SLAPD_OPTIONS"
-fi
-
-# Tell the user that something went wrong and give some hints for
-# resolving the problem.
-report_failure() {
-       if [ -n "$reason" ]; then
-               echo " - failed: "
-               echo "$reason"
-       else
-               echo " - failed."
-               cat <<EOF
-The operation failed but no output was produced. For hints on what went
-wrong please refer to the system's logfiles (e.g. /var/log/syslog) or
-try running the daemon in Debug mode like via "slapd -d 16383" (warning:
-this will create copious output).
-EOF
-
-               if [ -n "$SLURPD_OPTIONS" -o \
-                    -n "$SLAPD_OPTIONS" -o \
-                    -n "$SLAPD_SERVICES" ]; then
-                       cat << EOF
-
-Below, you can find the command line options used by this script to 
-run slapd and slurpd. Do not forget to specify those options if you
-want to look to debugging output:
-EOF
-                       if [ -z "$SLAPD_SERVICES" ]; then
-                               if [ -n "$SLAPD_OPTIONS" ]; then
-                                       echo "  slapd $SLAPD_OPTIONS"
-                               fi
-                       else
-                               echo "  slapd -h '$SLAPD_SERVICES' $SLAPD_OPTIONS"
-                       fi
-
-                       if [ "$SLURPD" = "yes" -a -n "$SLURPD_OPTIONS" ]; then
-                                       echo "  slurpd $SLURPD_OPTIONS"
-                       fi
-               fi
-       fi
-}
-
-# Try to recover slapd database
-try_fix_db() {
-       local dbdir failed bdb_envs
-
-       # db4.2-util is just recommended by slapd, so make sure it is
-       # available before trying to use it
-       if ! command -v $DB_RECOVER_CMD >/dev/null 2>&1; then
-               echo -n " ($DB_RECOVER_CMD not found), "
-               return 0
-       fi
-
-       bdb_envs=`find_bdb_envs`
-
-       # We care only about BDB environments
-       if [ -z "$bdb_envs" ]; then
-               return 0
-       fi
-
-       # Make sure there is no slapcat and no slapd running as we might
-       # break the DB in that case
-       if pidof /usr/lib/slapd >/dev/null; then
-               echo -n " (slapd running, no recovery), "
-               return 0
-       fi
-
-       echo -n " running BDB recovery"
-       for dbdir in $bdb_envs; do
-               reason="`$DB_RECOVER_CMD -eh $dbdir 2>&1`" || \
-                       db_recover_failed $dbdir
-       done
-       echo -n ","
-}
-
-# Find bdb environment dirs
-find_bdb_envs() {
-       local d
-       for d in `sed -ne 's/^directory[[:space:]]\+"*\([^"]\+\).*/\1/p' \
-                       < "$SLAPD_CONF"`; do
-               if [ -d "$d" -a -f "$d/objectClass.bdb" ]; then
-                       echo $d
-               fi
-       done
-}
-
-# Inform the user that BDB recovery failed
-db_recover_failed() {
-       local dbdir
-       dbdir="$1"
-
-       reason="`cat <<EOF
-Automatic recovery of the OpenLDAP directory database in
-
-       $dbdir
-
-failed. You will need to perform a manual recovery, possibly from backup.
-The failed command was $DB_RECOVER_CMD -eh $dbdir. Output:
-
-$reason
-EOF`"
-       exit 1
-}
-
-# Start the slapd daemon and capture the error message if any to 
-# $reason.
-start_slapd() {
-       echo -n " slapd"
-       if [ -z "$SLAPD_SERVICES" ]; then
-               reason="`start-stop-daemon --start --quiet --oknodo \
-                       --pidfile "$SLAPD_PIDFILE" \
-                       --exec /usr/sbin/slapd -- $SLAPD_OPTIONS 2>&1`"
-       else
-               reason="`start-stop-daemon --start --quiet --oknodo \
-                       --pidfile "$SLAPD_PIDFILE" \
-                       --exec /usr/sbin/slapd -- -h "$SLAPD_SERVICES" $SLAPD_OPTIONS 2>&1`"
-       fi
-}
-
-# Start the slurpd daemon and capture the error message if any to
-# $reason.
-start_slurpd() {
-       if [ "$SLURPD_START" != yes ]; then
-               return 0
-       fi
-       echo -n " slurpd"
-       reason="`start-stop-daemon --start --quiet --oknodo \
-               --exec /usr/sbin/slurpd -- $SLURPD_OPTIONS 2>&1`"
-}
-
-# Stop the slapd daemon and capture the error message (if any) to
-# $reason.
-stop_slapd() {
-       echo -n " slapd"
-       reason="`start-stop-daemon --stop --quiet --oknodo --retry 10 \
-               --pidfile "$SLAPD_PIDFILE" \
-               --exec /usr/sbin/slapd 2>&1`"
-}
-
-# Stop the slurpd daemon and capture the error message (if any) to
-# $reason.
-stop_slurpd() {
-       if [ "$SLURPD_START" != yes ]; then
-               return 0
-       fi
-       echo -n " slurpd"
-       reason="`start-stop-daemon --stop --quiet --oknodo --retry 10 \
-               --exec /usr/sbin/slurpd 2>&1`"
-}
-
-# Start the OpenLDAP daemons
-start() {
-       echo -n "Starting OpenLDAP:"
-       trap 'report_failure' 0
-       if [ "$TRY_BDB_RECOVERY" = "yes" ]; then
-               try_fix_db
-       fi
-       start_slapd
-       start_slurpd
-       trap "-" 0
-       echo .
-}
-
-# Stop the OpenLDAP daemons
-stop() {
-       echo -n "Stopping OpenLDAP:"
-       trap 'report_failure' 0
-       stop_slurpd
-       stop_slapd
-       trap "-" 0
-       echo .
-}
-
-case "$1" in
-  start)
-       start ;;
-  stop)
-       stop ;;
-  restart|force-reload)
-       stop
-       start
-       ;;
-  *)
-       echo "Usage: $0 {start|stop|restart|force-reload}"
-       exit 1
-       ;;
-esac