/etc/php5/apache2/php.ini
-Specificne postavke koje php5-cn paket automatski postavlja u
-navedenoj datoteci:
+Specificne postavke koje php5-cn paket postavlja u navedenoj
+datoteci:
upload_max_filesize = 256M
- post_max_size = 256MB
- memory_limit = 256M
+ post_max_size = <ovisno o kolicini memorije na posluzitelju>
+ memory_limit = <ovisno o kolicini memorije na posluzitelju>
-Konfiguracije za pojedine PHP5 dodatke (extensions) nalaze se
-unutar direktorija /etc/php5/conf.d/. Preporuka je da NE dirate
-i da NE brisete iste, osim ako znate sto cinite.
+post_max_size i memory_limit postavke se odredjuju ovisno o
+kolicini memorije na posluzitelju, tocnije:
+
+ * manje od 512MB => ogranicenje 16MB,
+ * 512-1024MB => ogranicenje 32MB,
+ * vise od 1024MB => ogranicenje 64MB.
+
+U slucaju da na posluzitelju postoji PHP5 konfiguracija koja
+se razlikuje od navedene, bit cete upitani zelite li zadrzati
+trenutne postavke ili aktivirati preporucene.
Nakon sto prepravite PHP5 konfiguraciju, potrebno je obaviti
restart Apache2 web servera:
stranice pisane u PHP-u, preporuca se da NE brisete i da ne
uredjujete navedene datoteke, osim ako znate sto cinite.
-
- -- Dragan Dosen <ddosen@ffzg.hr> Sun, 27 Jan 2008 14:54:24 +0100
+ -- Dragan Dosen <ddosen@ffzg.hr> Sun, 30 Mar 2008 20:03:30 +0200
+php5-cn (5.2.0-5) stable; urgency=medium
+
+ * dodana config skripta:
+ + usporedba trenutno aktivnih PHP5 postavki s onima koje
+ preporuca CARNet (upload_max_filesize, post_max_size,
+ memory_limit)
+ + koristi se debconf - u slucaju da se postavke razlikuju,
+ korisnik odlucuje zeli li zadrzati trenutne postavke ili
+ aktivirati preporucene
+ * config i postinst skripta - preporucene vrijednosti za
+ post_max_size i memory_limit postavke odredjuju se ovisno o
+ kolicini memorije na posluzitelju.
+ * u slucaju da ne postoji neka od php.ini datoteka, koristi
+ se /usr/share/php5/php.ini-dist za kreiranje nove.
+ * podesavanje postavki (php.ini datoteka/e) odvija se samo kod
+ prve instalacije paketa ili u slucaju da se pokrene
+ * README.CARNet datoteka - opisano odredjivanje preporucene
+ vrijednosti za post_max_size i memory_limit postavke.
+
+ -- Dragan Dosen <ddosen@ffzg.hr> Sun, 30 Mar 2008 22:10:32 +0200
+
php5-cn (5.2.0-4) stable; urgency=low
* control datoteka - uklonjene ovisnosti o php5-cgi, php5-gd,
--- /dev/null
+#!/bin/sh
+
+set -e
+
+# Load debconf
+. /usr/share/debconf/confmodule
+
+if [ "$1" != reconfigure ]; then
+
+ php5_done=1
+
+ for SAPI in apache2 cli; do
+ db_fget php5-cn/${SAPI} seen
+ if [ "$RET" != "true" ]; then
+ php5_done=0
+ break
+ fi
+ done
+
+ test $php5_done -eq 1 && exit 0
+fi
+
+PHP5DIR="/etc/php5"
+
+# phpmemlimit ()
+#
+# Calculate memory size for PHP memory_limit option.
+#
+phpmemlimit () {
+
+ local memtotal memlimit
+ memtotal=`awk 'tolower($1) == "memtotal:" { printf("%i", $2/1024); }' /proc/meminfo`
+
+ if [ $memtotal -lt 512 ]; then memlimit=16; fi
+ if [ $memtotal -ge 512 ]; then memlimit=32; fi
+ if [ $memtotal -gt 1024 ]; then memlimit=64; fi
+
+ echo $memlimit
+}
+
+
+# Check for PHP5 SAPI configuration.
+#
+for SAPI in apache2 cli; do
+
+ if [ ! -d "$PHP5DIR/$SAPI" ]; then
+ continue
+ fi
+
+ ini_diff=0
+ ini_file="$PHP5DIR/$SAPI/php.ini"
+
+ phplimit="$(phpmemlimit)M"
+
+ if [ -f "$ini_file" ]; then
+
+ if egrep -q "^[[:space:]]*(upload_max_filesize|post_max_size|memory_limit)[[:space:]]*=" $ini_file; then
+
+ upload_max_filesize=`awk '$1 == "upload_max_filesize" { print $3; exit(0) }' $ini_file`
+ post_max_size=`awk '$1 == "post_max_size" { print $3; exit(0) }' $ini_file`
+ memory_limit=`awk '$1 == "memory_limit" { print $3; exit(0) }' $ini_file`
+
+ if [ "$upload_max_filesize" != "256M" ]; then ini_diff=1; fi
+ if [ "$post_max_size" != "$phplimit" ]; then ini_diff=1; fi
+ if [ "$memory_limit" != "$phplimit" ]; then ini_diff=1; fi
+ else
+
+ ini_diff=1
+ fi
+ else
+
+ ini_diff=1
+ fi
+
+ if [ $ini_diff -eq 1 ]; then
+
+ # Configurations are not the same - ask user what to do.
+ test -z "$upload_max_filesize" && upload_max_filesize="2M"
+ test -z "$post_max_size" && post_max_size="8M"
+ test -z "$memory_limit" && memory_limit="16M"
+
+ db_title php5-cn - konfiguracija za $(echo ${SAPI} | sed 's/a/A/;s/cli/CLI/')
+ db_subst php5-cn/${SAPI} ini_file "$ini_file"
+
+ db_subst php5-cn/${SAPI} upload_max_filesize "$upload_max_filesize"
+ db_subst php5-cn/${SAPI} post_max_size "$post_max_size"
+ db_subst php5-cn/${SAPI} memory_limit "$memory_limit"
+
+ db_subst php5-cn/${SAPI} new_phplimit "$phplimit"
+
+ db_input critical php5-cn/${SAPI} || true
+ db_go || true
+ else
+
+ db_set php5-cn/${SAPI} false || true
+ db_fset php5-cn/${SAPI} seen true
+ fi
+
+done
+
+exit 0
esac
+# Load debconf
+. /usr/share/debconf/confmodule
+
# Include CARNet functions
. /usr/share/carnet-tools/functions.sh
need_restart=0
+# phpmemlimit ()
+#
+# Calculate memory size for PHP memory_limit option.
+#
+phpmemlimit () {
+
+ local memtotal memlimit
+ memtotal=`awk 'tolower($1) == "memtotal:" { printf("%i", $2/1024); }' /proc/meminfo`
+
+ if [ $memtotal -lt 512 ]; then memlimit=16; fi
+ if [ $memtotal -ge 512 ]; then memlimit=32; fi
+ if [ $memtotal -gt 1024 ]; then memlimit=64; fi
+
+ echo $memlimit
+}
+
+
# Disable PHP4 module and enable Apache2 PHP5 module.
#
if [ -e /etc/apache2/apache2.conf ]; then
fi
+# Check for PHP5 SAPI directories and configuration files.
+#
+for SAPI in apache2 cli; do
+
+ if [ ! -d "$PHP5DIR/$SAPI" ]; then
+ cp_echo "CN: Creating configuration directory $PHP5DIR/$SAPI/"
+ mkdir -p $PHP5DIR/$SAPI/
+ fi
+
+ ini_file="$PHP5DIR/$SAPI/php.ini"
+
+ if [ ! -f "$ini_file" ]; then
+
+ cp_echo "CN: Generating configuration file $ini_file"
+
+ ini_file_tmp=`mktemp $ini_file.tmp.XXXXXX`
+ if [ "$SAPI" = "cli" ]; then
+ if [ -f "/usr/share/php5/php.ini-dist.cli" ]; then
+ cat /usr/share/php5/php.ini-dist.cli > $ini_file_tmp
+ fi
+ else
+ if [ -f "/usr/share/php5/php.ini-dist" ]; then
+ cat /usr/share/php5/php.ini-dist > $ini_file_tmp
+ fi
+ fi
+ cp_mv $ini_file_tmp $ini_file
+ need_restart=1
+ fi
+done
+
+
+# Check for /etc/php5/conf.d/ directory.
+#
+if [ ! -d "$PHP5CONFD" ]; then
+ cp_echo "CN: Creating configuration directory $PHP5CONFD"
+ mkdir -p $PHP5CONFD/
+fi
+
+
# Check if PHP5 extensions are enabled.
#
for php5ext in $EXTENSIONS; do
php5ext_re="^[[:space:]]*extension[[:space:]]*=[[:space:]]*$php5ext\.so"
- # Remove extension entry from /etc/php5/(apache|apache2|cgi|cli).ini
+ # Remove extension entry from /etc/php5/(apache2|cli).ini
# configuration files.
- for SAPI in apache apache2 cgi cli; do
+ for SAPI in apache2 cli; do
- if [ -d "$PHP5DIR/$SAPI" ]; then
-
- ini_file="$PHP5DIR/$SAPI/php.ini"
+ ini_file="$PHP5DIR/$SAPI/php.ini"
- if [ -f "$ini_file" ]; then
+ if [ -f "$ini_file" ]; then
cp_echo "CN: Removing $php5ext extension from file $ini_file"
cp_check_and_sed "$php5ext_re" \
"/$php5ext_re/d" \
"$ini_file" && need_restart=1 || true
- fi
- fi
+ fi
done
- # Check $PHP5CONFD directory.
- if [ ! -d "$PHP5CONFD" ]; then
- cp_echo "CN: Creating configuration directory $PHP5CONFD"
- mkdir $PHP5CONFD
- fi
-
# Check extension configuration in /etc/php5/conf.d/ directory.
if [ ! -f "$PHP5CONFD/$php5ext.ini" ]; then
# Enable some PHP5 tweaks for Apache2 web server (/etc/php5/apache2/php.ini).
#
# * upload_max_filesize = 256M
-# * post_max_size = 256M
-# * memory_limit = 256M
+# * post_max_size, memory_limit = depends on system memory, we are using
+# phpmemlimit() function.
#
-for SAPI in apache apache2 cgi cli; do
+for SAPI in apache2 cli; do
if [ ! -d "$PHP5DIR/$SAPI" ]; then
continue
fi
+
+ db_get php5-cn/${SAPI} || true
+ if [ "$RET" = "true" ]; then
- ini_file="$PHP5DIR/$SAPI/php.ini"
+ ini_file="$PHP5DIR/$SAPI/php.ini"
- cp_echo "CN: Checking and enabling some CARNet specific parameters in file $ini_file"
+ cp_echo "CN: Checking and enabling some specific parameters in file $ini_file"
+
+ phplimit="$(phpmemlimit)M"
- if [ -f "$ini_file" ]; then
+ if [ -f "$ini_file" ]; then
- cp_check_and_sed "^[[:space:]]*upload_max_filesize[[:space:]]*=[[:space:]]*2M" \
+ cp_check_and_sed "^[[:space:]]*upload_max_filesize[[:space:]]*=" \
's/^[[:space:]]*upload_max_filesize[[:space:]]*=.*/upload_max_filesize = 256M/' \
"$ini_file" && need_restart=1 || true
- cp_check_and_sed "^[[:space:]]*post_max_size[[:space:]]*=[[:space:]]*8M" \
- 's/^[[:space:]]*post_max_size[[:space:]]*=.*/post_max_size = 256M/' \
+ cp_check_and_sed "^[[:space:]]*post_max_size[[:space:]]*=" \
+ "s/^[[:space:]]*post_max_size[[:space:]]*=.*/post_max_size = ${phplimit}/" \
"$ini_file" && need_restart=1 || true
- cp_check_and_sed "^[[:space:]]*memory_limit[[:space:]]*=[[:space:]]*16M" \
- 's/^[[:space:]]*memory_limit[[:space:]]*=.*/memory_limit = 256M/' \
+ cp_check_and_sed "^[[:space:]]*memory_limit[[:space:]]*=" \
+ "s/^[[:space:]]*memory_limit[[:space:]]*=.*/memory_limit = ${phplimit}/" \
"$ini_file" && need_restart=1 || true
- fi
+ fi
- ini_file_tmp=`mktemp $ini_file.tmp.XXXXXX`
- if [ -f "$ini_file" ]; then
+ ini_file_tmp=`mktemp $ini_file.tmp.XXXXXX`
+ if [ -f "$ini_file" ]; then
cat $ini_file > $ini_file_tmp
- fi
-
- if ! egrep -q "^[[:space:]]*(upload_max_filesize|post_max_size|memory_limit)[[:space:]]*=" $ini_file_tmp; then
+ fi
- if ! egrep -q "^[[:space:]]*upload_max_filesize[[:space:]]*=" $ini_file_tmp; then
- echo "upload_max_filesize = 256M" >> "$ini_file_tmp"
- fi
- if ! egrep -q "^[[:space:]]*post_max_size[[:space:]]*=" $ini_file_tmp; then
- echo "post_max_size = 256MB" >> "$ini_file_tmp"
- fi
- if ! egrep -q "^[[:space:]]*memory_limit[[:space:]]*=" $ini_file_tmp; then
- echo "memory_limit = 256M" >> "$ini_file_tmp"
- fi
- cp_mv "$ini_file_tmp" "$ini_file"
-
+ if ! egrep -q "^[[:space:]]*upload_max_filesize[[:space:]]*=" $ini_file_tmp; then
+ echo "upload_max_filesize = 256M" >> "$ini_file_tmp"
need_restart=1
- fi
+ fi
+ if ! egrep -q "^[[:space:]]*post_max_size[[:space:]]*=" $ini_file_tmp; then
+ echo "post_max_size = ${phplimit}" >> "$ini_file_tmp"
+ need_restart=1
+ fi
+ if ! egrep -q "^[[:space:]]*memory_limit[[:space:]]*=" $ini_file_tmp; then
+ echo "memory_limit = ${phplimit}" >> "$ini_file_tmp"
+ need_restart=1
+ fi
+ cp_mv "$ini_file_tmp" "$ini_file"
+
- if [ -e "$ini_file_tmp" ]; then
+ if [ -e "$ini_file_tmp" ]; then
rm -f "$ini_file_tmp"
+ fi
fi
done
+db_stop || true
+
+
# Restart Apache2 web server if needed.
#
if [ $need_restart -eq 1 ]; then
--- /dev/null
+Template: php5-cn/apache2
+Type: boolean
+Description: Zelite li aktivirati preporucene PHP5 postavke za Apache2?
+ Provjerom trenutne PHP5 konfiguracije za Apache2 (konfiguracijska
+ datoteka ${ini_file}), ustanovljeno je da su sljedece postavke aktivne:
+ .
+ upload_max_filesize = ${upload_max_filesize}
+ post_max_size = ${post_max_size}
+ memory_limit = ${memory_limit}
+
+ Preporucamo sljedece:
+ .
+ upload_max_filesize = 256M
+ post_max_size = ${new_phplimit}
+ memory_limit = ${new_phplimit}
+
+Template: php5-cn/cli
+Type: boolean
+Description: Zelite li aktivirati preporucene PHP5 postavke za CLI?
+ Provjerom trenutne PHP5 konfiguracije za CLI (PHP interpreter
+ za komandnu liniju, konfiguracijska datoteka ${ini_file}),
+ ustanovljeno je da su sljedece postavke aktivne:
+ .
+ upload_max_filesize = ${upload_max_filesize}
+ post_max_size = ${post_max_size}
+ memory_limit = ${memory_limit}
+
+ Preporucamo sljedece:
+ .
+ upload_max_filesize = 256M
+ post_max_size = ${new_phplimit}
+ memory_limit = ${new_phplimit}
projects / php5-cn.git / commitdiff