--- /dev/null
+bind9-cn
+~~~~~~~~
+
+Ovaj paket sluzi pojednostavljenju instalacije Bind9 paketa koji postoji u
+Debian distribuciji.
+
+Sam paket nazalost ne stvara sve konfiguracijske datoteke iz jednostavnog
+razloga jer je to neprakticno i uglavnom nemoguce, vec se sistemci upucuju
+na iscitavanje primjera izgeneriranih konfiguracijskih datoteka koji se
+nalaze u examples/ direktoriju.
+
+ -- Dinko Korunic <kreator@carnet.hr> Sat, 8 Sep 2007 17:28:46 +0200
--- /dev/null
+bind9-examples
+~~~~~~~~~~~~~~
+
+Slijedi popis datoteka koje se generiraju kao primjer konfiguracije
+Bind9 posluzitelja i njihova znacenja:
+
+- hosts:
+ Datoteka koja se obicno nalazi u /etc/hosts. Njena namjena je opisivanje
+ i popisivanje simbolicnih imena racunala i njihovih IP adresa tako da bi
+ ona bila prepoznata cak i u slucaju pada DNS servisa. Jasno, uvijek je
+ preporucljivo da se u toj datoteci nalazi `localhost' kao i sama adresa
+ racunala na kojem se inace Bind9 softver nalazi.
+
+- hosts.db:
+ Datoteka inace prizvoljnog imena, ali po konvenciji obicno se uvijek
+ koristi. Njena svrha je rezolucija labela->IP_adresa, pri cemu se moraju
+ popisati sva standardna DNS polja (MX, NS, SOA, itd.). Ukratko, rijec je
+ o `forward DNS zoni'. Ona se obicno nalazi u /etc/bind/hosts.db.
+
+- hosts.rev:
+ Datoteka inace prizvoljnog imena, ali po konvenciji obicno se uvijek
+ koristi. Njena svrha je rezolucija IP_adresa->labela, pri cemu se moraju
+ popisati sva standardna DNS polja (MX, NS, SOA, itd.). Ukratko, rijec je
+ o `reverse DNS zoni'. Ona se obicno nalazi u /etc/bind/hosts.rev.
+
+- named.conf.local:
+ Datoteka koja popisuje lokalne dodatke konfiguraciji Bind9 posluzitelja.
+ Ona ce sadrzavati popis zona i datoteka u kojima se nalaze, ali i moguce
+ dodatne opcije za sam softver. Ona se obicno nalazi u
+ /etc/bind/named.conf.local.
+
+- named.conf.options:
+ Datoteka koja definira osnovne parametre rada Bind9 posluzitelja.
+
+- resolv.conf:
+ Datoteka koja sluzi za ispravno konfiguriranje lokalnog resolvera.
+ Odnosno, njena zadaca je popisati sve aktivne DNS posluzitelje koji su
+ zaduzeni za to racunalo (a ako je ono samo server, onda je i samo
+ zaduzeno za sebe - pa to unosimo sa 127.0.0.1 adresom), kao i lokalnu
+ domenu u kojem se racunalo nalazi.
+
+ -- Dinko Korunic <kreator@carnet.hr> Sat, 8 Sep 2007 18:06:23 +0200
--- /dev/null
+bind9-cn (2:9.2.4-1) sarge; urgency=low
+
+ * dependancy o Bind9 9.2.4-1sarge1
+ * bolja detekcija konfiguracije, ignoriranje lame DNS-ova
+
+ -- Dinko Korunic <kreator@carnet.hr> Sat, 8 Sep 2007 17:40:33 +0200
+
+bind9-cn (2:9.2.3-2) sarge; urgency=low
+
+ * novo izdanje, dummy paket koji dependa o odgovarajucim paketima iz Debian
+ distribucije i donosi nekoliko primjera za zone i konfiguraciju
+ * dokumentirane datoteke u examples/
+
+ -- Dinko Korunic <kreator@carnet.hr> Mon, 31 May 2004 11:04:19 +0200
+
--- /dev/null
+bind9-cn (2:9.2.4-1) sarge; urgency=low
+
+ * dependancy o Bind9 9.2.4-1sarge1
+ * bolja detekcija konfiguracije, ignoriranje lame DNS-ova
+
+ -- Dinko Korunic <kreator@carnet.hr> Sat, 8 Sep 2007 17:40:33 +0200
+
+bind9-cn (2:9.2.3-2) sarge; urgency=low
+
+ * novo izdanje, dummy paket koji dependa o odgovarajucim paketima iz Debian
+ distribucije i donosi nekoliko primjera za zone i konfiguraciju
+ * dokumentirane datoteke u examples/
+
+ -- Dinko Korunic <kreator@carnet.hr> Mon, 31 May 2004 11:04:19 +0200
+
--- /dev/null
+Source: bind9-cn
+Section: net
+Priority: optional
+Maintainer: Dinko Korunic <kreator@carnet.hr>
+Build-Depends: debhelper (>= 4)
+Standards-Version: 3.7.2
+
+Package: bind9-cn
+Architecture: any
+Depends: bind9 (>= 9.2.4-1sarge1), carnet-tools-cn (>= 2.1.8)
+Recommends: bind9-doc (>= 9.2.4-1sarge1), host | bind9-host (>= 9.2.4-1sarge1), dnsutils, dnswalk
+Description: Internet Domain Name Server
+ The Berkeley Internet Name Domain (BIND) implements an Internet domain
+ name server. BIND is the most widely-used name server software on the
+ Internet, and is supported by the Internet Software Consortium, www.isc.org.
+ .
+ This is a basic CARNet Debian customization package.
+
--- /dev/null
+changelog.CARNet
+README.CARNet
--- /dev/null
+README.examples
+hosts
+hosts.db
+hosts.rev
+named.conf.local
+resolv.conf
+named.conf.options
--- /dev/null
+#!/bin/sh
+# postinst script for bind9-cn
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postinst> `configure' <most-recently-configured-version>
+# * <old-postinst> `abort-upgrade' <new version>
+# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+# <new-version>
+# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+# <failed-install-package> <version> `removing'
+# <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+#
+
+case "$1" in
+ configure|reconfigure)
+ # continue below
+ ;;
+
+ *)
+ exit 0
+ ;;
+esac
+
+# import CN-functions
+. /usr/share/carnet-tools/functions.sh
+
+echo "CN: Making sample configurations in /usr/share/doc/bind9-cn/examples"
+echo "CN: Make sure you read them and apply *before* running Bind9 service!"
+
+#variables
+cp_get_ifaddr
+CARNET_IPADDR=$RET
+cp_get_netaddr
+CARNET_NETADDR=$RET
+CARNET_HOSTNAME=`hostname`
+CARNET_DOMAINNAME=`hostname --domain`
+CARNET_REV=`echo $CARNET_IPADDR | awk -F. '{ print $3 "." $2 "." $1 ".in-addr.arpa" }'`
+SERNO=`date +%Y%m%d01`
+BROJ=`echo $CARNET_IPADDR | cut -d. -f4`
+
+# make example named.conf.local
+cat > /usr/share/doc/bind9-cn/examples/named.conf.local <<EOF
+zone "$CARNET_DOMAINNAME" in {
+ type master;
+ file "/etc/bind/hosts.db";
+};
+
+zone "$CARNET_REV" in {
+ type master;
+ file "/etc/bind/hosts.rev";
+};
+EOF
+
+# make example named.conf.options
+cat > /usr/share/doc/bind9-cn/examples/named.conf.options <<EOF
+acl "xfer" {
+ 161.53.2.70;
+ 161.53.123.3;
+ 161.53.3.7;
+ 127.0.0.1;
+};
+
+acl "trusted" {
+ $CARNET_NETADDR;
+ 127.0.0.0/8;
+};
+
+options {
+ directory "/etc/bind";
+ query-source address * port 53;
+ auth-nxdomain no;
+ allow-transfer { xfer; };
+ allow-recursion { trusted; };
+ version "No version.";
+ transfer-format many-answers;
+ max-transfer-time-in 90;
+ interface-interval 0;
+ notify yes;
+ listen-on-v6 { none; };
+};
+
+logging {
+ category lame-servers { null; };
+};
+EOF
+
+# make example hosts.db
+cat > /usr/share/doc/bind9-cn/examples/hosts.db <<EOF
+\$TTL 86400
+@ SOA $CARNET_HOSTNAME.$CARNET_DOMAINNAME. hostmaster.$CARNET_HOSTNAME.$CARNET_DOMAINNAME. (
+ $SERNO ; Serial
+ 28800 ; Refresh
+ 7200 ; Retry
+ 604800 ; Expire
+ 86400 ) ; Minimum
+ NS $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+ NS bjesomar.srce.hr.
+ A $CARNET_IPADDR
+ MX 5 $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+
+localhost.$CARNET_DOMAINNAME. A 127.0.0.1
+$CARNET_HOSTNAME.$CARNET_DOMAINNAME. A $CARNET_IPADDR
+
+dns CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+ns CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+www CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+proxy CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+mail CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+smtp CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+pop CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+imap CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+ftp CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+ntp CNAME $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+EOF
+
+# make example hosts.rev
+cat > /usr/share/doc/bind9-cn/examples/hosts.rev <<EOF
+\$TTL 86400
+@ SOA $CARNET_HOSTNAME.$CARNET_DOMAINNAME. hostmaster.$CARNET_HOSTNAME.$CARNET_DOMAINNAME. (
+ $SERNO ; Serial
+ 28800 ; Refresh
+ 7200 ; Retry
+ 604800 ; Expire
+ 86400 ) ; Minimum
+ NS $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+ NS bjesomar.srce.hr.
+
+1 PTR localhost.$CARNET_DOMAINNAME.
+$BROJ PTR $CARNET_HOSTNAME.$CARNET_DOMAINNAME.
+EOF
+
+# make example hosts
+cat > /usr/share/doc/bind9-cn/examples/hosts <<EOF
+# /etc/hosts - names & shortcuts to various hosts
+127.0.0.1 localhost.$CARNET_DOMAINNAME localhost
+$CARNET_IPADDR $CARNET_HOSTNAME.$CARNET_DOMAINNAME $CARNET_HOSTNAME
+EOF
+
+# make example resolv.conf
+cat > /usr/share/doc/bind9-cn/examples/resolv.conf <<EOF
+search $CARNET_DOMAINNAME
+nameserver 127.0.0.1
+nameserver 161.53.2.70
+EOF
+
+# check if named.conf has lame server logging
+if [ -e /etc/bind/named.conf.options ]; then
+ lameconf=$(awk '/^logging/,/^}/ { if ($0 ~ /category lame-servers/) { print "yes"; exit } }' /etc/bind/named.conf)
+ if [ "x$lameconf" != "xyes" ]; then
+ cp /etc/bind/named.conf.options /etc/bind/named.conf.options.$$
+ cp-update bind9-cn /etc/bind/named.conf.options.$$ <<EOF
+logging {
+ category lame-servers { null; };
+};
+EOF
+ cp_mv /etc/bind/named.conf.options.$$ /etc/bind/named.conf.options
+ fi
+fi
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#!/bin/sh
+# postrm script for bind9-cn
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postrm> `remove'
+# * <postrm> `purge'
+# * <old-postrm> `upgrade' <new-version>
+# * <new-postrm> `failed-upgrade' <old-version>
+# * <new-postrm> `abort-install'
+# * <new-postrm> `abort-install' <old-version>
+# * <new-postrm> `abort-upgrade' <old-version>
+# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+case "$1" in
+ purge)
+ # continue below
+ ;;
+
+ *)
+ exit 0
+ ;;
+esac
+
+# import CN-functions
+. /usr/share/carnet-tools/functions.sh
+
+# remove our block
+if [ -e /etc/bind/named.conf.options ]; then
+ cp-update -r bind9-cn /etc/bind/named.conf.options
+fi
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# This file is public domain software, originally written by Joey Hess.
+#
+# This version is for packages that are architecture independent.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+build: build-stamp
+build-stamp:
+ dh_testdir
+
+ # Add here commands to compile the package.
+ #$(MAKE)
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ # Add here commands to clean up after the build process.
+ #-$(MAKE) clean
+ #-$(MAKE) distclean
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ # Add here commands to install the package into debian/<packagename>.
+ #$(MAKE) prefix=`pwd`/debian/`dh_listpackages`/usr install
+
+# Build architecture-independent files here.
+binary-indep: build install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+# dh_installmenu
+# dh_installdebconf
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installcatalogs
+# dh_installpam
+# dh_installmime
+# dh_installinit
+# dh_installcron
+# dh_installinfo
+# dh_undocumented
+ dh_installman
+ dh_link
+ dh_compress
+ dh_fixperms
+# dh_perl
+# dh_python
+ dh_installdeb
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture-dependent files here.
+binary-arch: build install
+# We have nothing to do by default.
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
projects / bind9-cn.git / commitdiff