+++ /dev/null
-Listen 80
-Listen 443
+++ /dev/null
-options {
- directory "/var/cache/bind";
-
- // If there is a firewall between you and nameservers you want
- // to talk to, you might need to uncomment the query-source
- // directive below. Previous versions of BIND always asked
- // questions using port 53, but BIND 8.1 and later use an unprivileged
- // port by default.
-
-
- // If your ISP provided one or more IP addresses for stable
- // nameservers, you probably want to use them as forwarders.
- // Uncomment the following block, and insert the addresses replacing
- // the all-0's placeholder.
-
- // forwarders {
- // 0.0.0.0;
- // };
-
- auth-nxdomain no; # conform to RFC1035
- listen-on-v6 { any; };
-};
-
-# Begin update by CARNet package bind9-cn -- DO NOT DELETE THIS LINE!
-logging {
- category lame-servers { null; };
-};
-# End update by CARNet package bind9-cn -- DO NOT DELETE THIS LINE!
+++ /dev/null
-options {
- directory "/var/cache/bind";
-
- // If there is a firewall between you and nameservers you want
- // to talk to, you might need to uncomment the query-source
- // directive below. Previous versions of BIND always asked
- // questions using port 53, but BIND 8.1 and later use an unprivileged
- // port by default.
-
- // query-source address * port 53;
-
- // If your ISP provided one or more IP addresses for stable
- // nameservers, you probably want to use them as forwarders.
- // Uncomment the following block, and insert the addresses replacing
- // the all-0's placeholder.
-
- // forwarders {
- // 0.0.0.0;
- // };
-
- auth-nxdomain no; # conform to RFC1035
- listen-on-v6 { any; };
-};
-
+++ /dev/null
-#
-# Settings for saslauthd daemon
-#
-
-# Should saslauthd run automatically on startup? (default: no)
-START=yes
-
-# Which authentication mechanisms should saslauthd use? (default: pam)
-#
-# Available options in this Debian package:
-# getpwent -- use the getpwent() library function
-# kerberos5 -- use Kerberos 5
-# pam -- use PAM
-# rimap -- use a remote IMAP server
-# shadow -- use the local shadow password file
-# sasldb -- use the local sasldb database file
-# ldap -- use LDAP (configuration is in /etc/saslauthd.conf)
-#
-# Only one option may be used at a time. See the saslauthd man page
-# for more information.
-#
-# Example: MECHANISMS="pam"
-MECHANISMS="pam"
-
-# Additional options for this mechanism. (default: none)
-# See the saslauthd man page for information about mech-specific options.
-MECH_OPTIONS=""
-
-# How many saslauthd processes should we run? (default: 5)
-# A value of 0 will fork a new process for each connection.
-THREADS=5
-
-# Other options (default: -c)
-# See the saslauthd man page for information about these options.
-#
-# Example for postfix users: "-c -m /var/spool/postfix/var/run/saslauthd"
-# Note: See /usr/share/doc/sasl2-bin/README.Debian
-OPTIONS="-c"
-PARAMS="-m /var/spool/postfix/var/run/saslauthd"
-PIDFILE="/var/spool/postfix/var/run/saslauthd/saslauthd.pid"
-PWDIR="/var/spool/postfix/var/run/saslauthd"
-[ ! -L /var/run/saslauthd -a -d /var/spool/postfix/var/run/saslauthd -a ! -d /var/run/saslauthd ] && ln -s /var/spool/postfix/var/run/saslauthd /var/run/saslauthd || true
+++ /dev/null
-#
-# Settings for saslauthd daemon
-#
-
-# Should saslauthd run automatically on startup? (default: no)
-START=no
-
-# Which authentication mechanisms should saslauthd use? (default: pam)
-#
-# Available options in this Debian package:
-# getpwent -- use the getpwent() library function
-# kerberos5 -- use Kerberos 5
-# pam -- use PAM
-# rimap -- use a remote IMAP server
-# shadow -- use the local shadow password file
-# sasldb -- use the local sasldb database file
-# ldap -- use LDAP (configuration is in /etc/saslauthd.conf)
-#
-# Only one option may be used at a time. See the saslauthd man page
-# for more information.
-#
-# Example: MECHANISMS="pam"
-MECHANISMS="pam"
-
-# Additional options for this mechanism. (default: none)
-# See the saslauthd man page for information about mech-specific options.
-MECH_OPTIONS=""
-
-# How many saslauthd processes should we run? (default: 5)
-# A value of 0 will fork a new process for each connection.
-THREADS=5
-
-# Other options (default: -c)
-# See the saslauthd man page for information about these options.
-#
-# Example for postfix users: "-c -m /var/spool/postfix/var/run/saslauthd"
-# Note: See /usr/share/doc/sasl2-bin/README.Debian
-OPTIONS="-c"
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;
-; WARNING ;
-;;;;;;;;;;;
-; This is the default settings file for new PHP installations.
-; By default, PHP installs itself with a configuration suitable for
-; development purposes, and *NOT* for production purposes.
-; For several security-oriented considerations that should be taken
-; before going online with your site, please consult php.ini-recommended
-; and http://php.net/manual/en/security.php.
-
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; This file controls many aspects of PHP's behavior. In order for PHP to
-; read it, it must be named 'php.ini'. PHP looks for it in the current
-; working directory, in the path designated by the environment variable
-; PHPRC, and in the path that was defined in compile time (in that order).
-; Under Windows, the compile-time path is the Windows directory. The
-; path in which the php.ini file is looked for can be overridden using
-; the -c argument in command line mode.
-;
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-;
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-;
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
-;
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-;
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-;
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-;
-; foo = ; sets foo to an empty string
-; foo = none ; sets foo to an empty string
-; foo = "none" ; sets foo to the string 'none'
-;
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-;
-;
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; All the values in the php.ini-dist file correspond to the builtin
-; defaults (that is, if no php.ini is used, or if you delete these lines,
-; the builtin defaults will be identical).
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
-zend.ze1_compatibility_mode = Off
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision = 12
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-zlib.output_compression = Off
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = On
-
-;
-; Safe Mode
-;
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long request, which may end up
-; being interrupted by the user or a browser timing out.
-; ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; realpath_cache_size=16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; realpath_cache_ttl=120
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-memory_limit = 16M ; Maximum amount of memory a script may consume (16MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings (doesn't include E_STRICT)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-;
-; Examples:
-;
-; - Show all errors, except for notices and coding standards warnings
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors except for notices and coding standards warnings
-;
-error_reporting = E_ALL & ~E_NOTICE
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = On
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = Off
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-; Note: Never use this feature for production boxes.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot.
-; Note: Never use this feature for production boxes.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&".
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&".
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "EGPCS"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-
-; NOTE: applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-register_globals = Off
-
-; Whether or not to register the old-style input arrays, HTTP_GET_VARS
-; and friends. If you're not using them, it's recommended to turn them off,
-; for performance reasons.
-register_long_arrays = On
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = On
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = On
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-;include_path = ".:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 2M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the User-Agent string
-; user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-
-
-; Example lines:
-
-;extension=mysql.so
-;extension=gd.so
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-;date.timezone =
-
-;date.default_latitude = 31.7667
-;date.default_longitude = 35.2333
-
-;date.sunrise_zenith = 90.583333
-;date.sunset_zenith = 90.583333
-
-[filter]
-;filter.default = unsafe_raw
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[sqlite]
-;sqlite.assoc_case = 0
-
-[xmlrpc]
-;xmlrpc_error_number = 0
-;xmlrpc_errors = 0
-
-[Pcre]
-;pcre.recursion_limit=100000
-;pcre.backtrack_limit=100000
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db = Not yet implemented
-;odbc.default_user = Not yet implemented
-;odbc.default_pw = Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of links. -1 means no limit.
-mysqli.max_links = -1
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; As of PHP 4.0.1, you can define the path as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-;session.save_path = /var/lib/php5
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-;session.cookie_secure =
-
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-; This is disabled in the Debian packages, due to the strict permissions
-; on /var/lib/php5. Instead of setting this here, see the cronjob at
-; /etc/cron.d/php5, which uses the session.gc_maxlifetime setting below
-;session.gc_probability = 0
-session.gc_divisor = 100
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 1
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; Select a hash function
-; 0: MD5 (128 bits)
-; 1: SHA-1 (160 bits)
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-;
-; 4 bits: 0-9, a-f
-; 5 bits: 0-9, a-v
-; 6 bits: 0-9, a-z, A-Z, "-", ","
-session.hash_bits_per_character = 4
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file =
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constant registrations
-;com.autoregister_verbose = true
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.show_timestamp_decimals = Off
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-
-[gd]
-; Tell the jpeg decode to libjpeg warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel = UCS-2LE
-;exif.encode_jis =
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-soap.wsdl_cache_enabled=1
-; Sets the directory name where SOAP extension will put cache files.
-soap.wsdl_cache_dir="/tmp"
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-soap.wsdl_cache_ttl=86400
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;
-; WARNING ;
-;;;;;;;;;;;
-; This is the default settings file for new PHP installations.
-; By default, PHP installs itself with a configuration suitable for
-; development purposes, and *NOT* for production purposes.
-; For several security-oriented considerations that should be taken
-; before going online with your site, please consult php.ini-recommended
-; and http://php.net/manual/en/security.php.
-
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; This file controls many aspects of PHP's behavior. In order for PHP to
-; read it, it must be named 'php.ini'. PHP looks for it in the current
-; working directory, in the path designated by the environment variable
-; PHPRC, and in the path that was defined in compile time (in that order).
-; Under Windows, the compile-time path is the Windows directory. The
-; path in which the php.ini file is looked for can be overridden using
-; the -c argument in command line mode.
-;
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-;
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-;
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
-;
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-;
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-;
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-;
-; foo = ; sets foo to an empty string
-; foo = none ; sets foo to an empty string
-; foo = "none" ; sets foo to the string 'none'
-;
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-;
-;
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; All the values in the php.ini-dist file correspond to the builtin
-; defaults (that is, if no php.ini is used, or if you delete these lines,
-; the builtin defaults will be identical).
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
-zend.ze1_compatibility_mode = Off
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision = 12
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-zlib.output_compression = Off
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = On
-
-;
-; Safe Mode
-;
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long request, which may end up
-; being interrupted by the user or a browser timing out.
-; ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; realpath_cache_size=16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; realpath_cache_ttl=120
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-memory_limit = 32M
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings (doesn't include E_STRICT)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-;
-; Examples:
-;
-; - Show all errors, except for notices and coding standards warnings
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors except for notices and coding standards warnings
-;
-error_reporting = E_ALL & ~E_NOTICE
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = On
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = Off
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-; Note: Never use this feature for production boxes.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot.
-; Note: Never use this feature for production boxes.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&".
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&".
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "EGPCS"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-
-; NOTE: applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-register_globals = Off
-
-; Whether or not to register the old-style input arrays, HTTP_GET_VARS
-; and friends. If you're not using them, it's recommended to turn them off,
-; for performance reasons.
-register_long_arrays = On
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = On
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 32M
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = On
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-;include_path = ".:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 256M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the User-Agent string
-; user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-
-
-; Example lines:
-
-;extension=mysql.so
-;extension=gd.so
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-;date.timezone =
-
-;date.default_latitude = 31.7667
-;date.default_longitude = 35.2333
-
-;date.sunrise_zenith = 90.583333
-;date.sunset_zenith = 90.583333
-
-[filter]
-;filter.default = unsafe_raw
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[sqlite]
-;sqlite.assoc_case = 0
-
-[xmlrpc]
-;xmlrpc_error_number = 0
-;xmlrpc_errors = 0
-
-[Pcre]
-;pcre.recursion_limit=100000
-;pcre.backtrack_limit=100000
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db = Not yet implemented
-;odbc.default_user = Not yet implemented
-;odbc.default_pw = Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of links. -1 means no limit.
-mysqli.max_links = -1
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; As of PHP 4.0.1, you can define the path as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-;session.save_path = /var/lib/php5
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-;session.cookie_secure =
-
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-; This is disabled in the Debian packages, due to the strict permissions
-; on /var/lib/php5. Instead of setting this here, see the cronjob at
-; /etc/cron.d/php5, which uses the session.gc_maxlifetime setting below
-;session.gc_probability = 0
-session.gc_divisor = 100
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 1
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; Select a hash function
-; 0: MD5 (128 bits)
-; 1: SHA-1 (160 bits)
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-;
-; 4 bits: 0-9, a-f
-; 5 bits: 0-9, a-v
-; 6 bits: 0-9, a-z, A-Z, "-", ","
-session.hash_bits_per_character = 4
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file =
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constant registrations
-;com.autoregister_verbose = true
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.show_timestamp_decimals = Off
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-
-[gd]
-; Tell the jpeg decode to libjpeg warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel = UCS-2LE
-;exif.encode_jis =
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-soap.wsdl_cache_enabled=1
-; Sets the directory name where SOAP extension will put cache files.
-soap.wsdl_cache_dir="/tmp"
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-soap.wsdl_cache_ttl=86400
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;
-; WARNING ;
-;;;;;;;;;;;
-; This is the default settings file for new PHP installations.
-; By default, PHP installs itself with a configuration suitable for
-; development purposes, and *NOT* for production purposes.
-; For several security-oriented considerations that should be taken
-; before going online with your site, please consult php.ini-recommended
-; and http://php.net/manual/en/security.php.
-
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; This file controls many aspects of PHP's behavior. In order for PHP to
-; read it, it must be named 'php.ini'. PHP looks for it in the current
-; working directory, in the path designated by the environment variable
-; PHPRC, and in the path that was defined in compile time (in that order).
-; Under Windows, the compile-time path is the Windows directory. The
-; path in which the php.ini file is looked for can be overridden using
-; the -c argument in command line mode.
-;
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-;
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-;
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
-;
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-;
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-;
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-;
-; foo = ; sets foo to an empty string
-; foo = none ; sets foo to an empty string
-; foo = "none" ; sets foo to the string 'none'
-;
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-;
-;
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; All the values in the php.ini-dist file correspond to the builtin
-; defaults (that is, if no php.ini is used, or if you delete these lines,
-; the builtin defaults will be identical).
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
-zend.ze1_compatibility_mode = Off
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision = 12
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-zlib.output_compression = Off
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = On
-
-;
-; Safe Mode
-;
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long request, which may end up
-; being interrupted by the user or a browser timing out.
-; ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; realpath_cache_size=16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; realpath_cache_ttl=120
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-memory_limit = 16M ; Maximum amount of memory a script may consume (16MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings (doesn't include E_STRICT)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-;
-; Examples:
-;
-; - Show all errors, except for notices and coding standards warnings
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors except for notices and coding standards warnings
-;
-error_reporting = E_ALL & ~E_NOTICE
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = On
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = Off
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-; Note: Never use this feature for production boxes.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot.
-; Note: Never use this feature for production boxes.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&".
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&".
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "EGPCS"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-
-; NOTE: applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-register_globals = Off
-
-; Whether or not to register the old-style input arrays, HTTP_GET_VARS
-; and friends. If you're not using them, it's recommended to turn them off,
-; for performance reasons.
-register_long_arrays = On
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = On
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = On
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-;include_path = ".:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 2M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the User-Agent string
-; user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-
-
-; Example lines:
-
-;extension=mysql.so
-;extension=gd.so
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-;date.timezone =
-
-;date.default_latitude = 31.7667
-;date.default_longitude = 35.2333
-
-;date.sunrise_zenith = 90.583333
-;date.sunset_zenith = 90.583333
-
-[filter]
-;filter.default = unsafe_raw
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[sqlite]
-;sqlite.assoc_case = 0
-
-[xmlrpc]
-;xmlrpc_error_number = 0
-;xmlrpc_errors = 0
-
-[Pcre]
-;pcre.recursion_limit=100000
-;pcre.backtrack_limit=100000
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db = Not yet implemented
-;odbc.default_user = Not yet implemented
-;odbc.default_pw = Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of links. -1 means no limit.
-mysqli.max_links = -1
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; As of PHP 4.0.1, you can define the path as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-;session.save_path = /var/lib/php5
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-;session.cookie_secure =
-
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-; This is disabled in the Debian packages, due to the strict permissions
-; on /var/lib/php5. Instead of setting this here, see the cronjob at
-; /etc/cron.d/php5, which uses the session.gc_maxlifetime setting below
-;session.gc_probability = 0
-session.gc_divisor = 100
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 1
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; Select a hash function
-; 0: MD5 (128 bits)
-; 1: SHA-1 (160 bits)
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-;
-; 4 bits: 0-9, a-f
-; 5 bits: 0-9, a-v
-; 6 bits: 0-9, a-z, A-Z, "-", ","
-session.hash_bits_per_character = 4
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file =
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constant registrations
-;com.autoregister_verbose = true
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.show_timestamp_decimals = Off
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-
-[gd]
-; Tell the jpeg decode to libjpeg warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel = UCS-2LE
-;exif.encode_jis =
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-soap.wsdl_cache_enabled=1
-; Sets the directory name where SOAP extension will put cache files.
-soap.wsdl_cache_dir="/tmp"
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-soap.wsdl_cache_ttl=86400
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-[PHP]
-
-;;;;;;;;;;;
-; WARNING ;
-;;;;;;;;;;;
-; This is the default settings file for new PHP installations.
-; By default, PHP installs itself with a configuration suitable for
-; development purposes, and *NOT* for production purposes.
-; For several security-oriented considerations that should be taken
-; before going online with your site, please consult php.ini-recommended
-; and http://php.net/manual/en/security.php.
-
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini ;
-;;;;;;;;;;;;;;;;;;;
-; This file controls many aspects of PHP's behavior. In order for PHP to
-; read it, it must be named 'php.ini'. PHP looks for it in the current
-; working directory, in the path designated by the environment variable
-; PHPRC, and in the path that was defined in compile time (in that order).
-; Under Windows, the compile-time path is the Windows directory. The
-; path in which the php.ini file is looked for can be overridden using
-; the -c argument in command line mode.
-;
-; The syntax of the file is extremely simple. Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-;
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-;
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
-;
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; | bitwise OR
-; & bitwise AND
-; ~ bitwise NOT
-; ! boolean NOT
-;
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-;
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-;
-; foo = ; sets foo to an empty string
-; foo = none ; sets foo to an empty string
-; foo = "none" ; sets foo to the string 'none'
-;
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-;
-;
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; All the values in the php.ini-dist file correspond to the builtin
-; defaults (that is, if no php.ini is used, or if you delete these lines,
-; the builtin defaults will be identical).
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
-zend.ze1_compatibility_mode = Off
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision = 12
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = Off
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few hundreds bytes each as a result of
-; compression. If you prefer a larger chunk size for better
-; performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-; output_handler, or otherwise the output will be corrupted.
-zlib.output_compression = Off
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = On
-
-;
-; Safe Mode
-;
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-
-; NOTE: this is considered a "broken" security measure.
-; Applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <span style="color: ???????"> would work.
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long request, which may end up
-; being interrupted by the user or a browser timing out.
-; ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; realpath_cache_size=16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; realpath_cache_ttl=120
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-memory_limit = 32M
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings (doesn't include E_STRICT)
-; E_ERROR - fatal run-time errors
-; E_RECOVERABLE_ERROR - almost fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_STRICT - run-time notices, enable to have PHP suggest changes
-; to your code which will ensure the best interoperability
-; and forward compatibility of your code
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-;
-; Examples:
-;
-; - Show all errors, except for notices and coding standards warnings
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors except for notices and coding standards warnings
-;
-error_reporting = E_ALL & ~E_NOTICE
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = On
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = Off
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-; Note: Never use this feature for production boxes.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot.
-; Note: Never use this feature for production boxes.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&".
-;arg_separator.output = "&"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&".
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "EGPCS"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-
-; NOTE: applications relying on this feature will not recieve full
-; support by the security team. For more information please
-; see /usr/share/doc/php5-common/README.Debian.security
-;
-register_globals = Off
-
-; Whether or not to register the old-style input arrays, HTTP_GET_VARS
-; and friends. If you're not using them, it's recommended to turn them off,
-; for performance reasons.
-register_long_arrays = On
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = On
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 32M
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = On
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-;include_path = ".:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 256M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-allow_url_include = Off
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the User-Agent string
-; user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-
-
-; Example lines:
-
-;extension=mysql.so
-;extension=gd.so
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-;date.timezone =
-
-;date.default_latitude = 31.7667
-;date.default_longitude = 35.2333
-
-;date.sunrise_zenith = 90.583333
-;date.sunset_zenith = 90.583333
-
-[filter]
-;filter.default = unsafe_raw
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[sqlite]
-;sqlite.assoc_case = 0
-
-[xmlrpc]
-;xmlrpc_error_number = 0
-;xmlrpc_errors = 0
-
-[Pcre]
-;pcre.recursion_limit=100000
-;pcre.backtrack_limit=100000
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db = Not yet implemented
-;odbc.default_user = Not yet implemented
-;odbc.default_pw = Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of links. -1 means no limit.
-mysqli.max_links = -1
-
-; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; As of PHP 4.0.1, you can define the path as:
-;
-; session.save_path = "N;/path"
-;
-; where N is an integer. Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories. This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-; You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-; use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-; session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-;session.save_path = /var/lib/php5
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-;session.cookie_secure =
-
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-session.cookie_httponly =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-; This is disabled in the Debian packages, due to the strict permissions
-; on /var/lib/php5. Instead of setting this here, see the cronjob at
-; /etc/cron.d/php5, which uses the session.gc_maxlifetime setting below
-;session.gc_probability = 0
-session.gc_divisor = 100
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-; (see session.save_path above), then garbage collection does *not*
-; happen automatically. You will need to do your own garbage
-; collection through a shell script, cron entry, or some other method.
-; For example, the following script would is the equivalent of
-; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-; cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 1
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; Select a hash function
-; 0: MD5 (128 bits)
-; 1: SHA-1 (160 bits)
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-;
-; 4 bits: 0-9, a-f
-; 5 bits: 0-9, a-v
-; 6 bits: 0-9, a-z, A-Z, "-", ","
-session.hash_bits_per_character = 4
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=,fieldset="
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file =
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constant registrations
-;com.autoregister_verbose = true
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.show_timestamp_decimals = Off
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-
-[gd]
-; Tell the jpeg decode to libjpeg warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel = UCS-2LE
-;exif.encode_jis =
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-soap.wsdl_cache_enabled=1
-; Sets the directory name where SOAP extension will put cache files.
-soap.wsdl_cache_dir="/tmp"
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-soap.wsdl_cache_ttl=86400
-
-; Local Variables:
-; tab-width: 4
-; End:
+++ /dev/null
-# See razor-agent.conf (5)
-
-# Change this to 5 for safer classification of MIME attachments. This will let more spam through
-logic_method = 4
-# Uncomment the next line for logging via syslog
-logfile=sys-syslog
-# If you do log to syslog, consider using logrotate
-# (see /usr/share/doc/razor/logcheck.ignore.eg)
+++ /dev/null
-# See razor-agent.conf (5)
-
-# Change this to 5 for safer classification of MIME attachments. This will let more spam through
-logic_method = 4
-# Uncomment the next line for logging via syslog
-#logfile = sys-syslog
-# If you do log to syslog, consider using logrotate
-# (see /usr/share/doc/razor/logcheck.ignore.eg)
+++ /dev/null
-#
-# Sample configuration file for the Samba suite for Debian GNU/Linux.
-#
-#
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options most of which
-# are not shown in this example
-#
-# Any line which starts with a ; (semi-colon) or a # (hash)
-# is a comment and is ignored. In this example we will use a #
-# for commentary and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command
-# "testparm" to check that you have not made any basic syntactic
-# errors.
-#
-
-#======================= Global Settings =======================
-
-[global]
-
-## Browsing/Identification ###
-
-# Change this to the workgroup/NT-domain name your Samba server will part of
- workgroup =
-
-# server string is the equivalent of the NT Description field
- server string = %h server
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
-; wins support = no
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-; wins server = w.x.y.z
-
-# This will prevent nmbd to search for NetBIOS names through DNS.
- dns proxy = no
-
-# What naming service and in what order should we use to resolve host names
-# to IP addresses
-; name resolve order = lmhosts host wins bcast
-
-#### Networking ####
-
-# The specific set of interfaces / networks to bind to
-# This can be either the interface name or an IP address/netmask;
-# interface names are normally preferred
-; interfaces = 127.0.0.0/8 eth0
-
-# Only bind to the named interfaces and/or networks; you must use the
-# 'interfaces' option above to use this.
-# It is recommended that you enable this feature if your Samba machine is
-# not protected by a firewall or is a firewall itself. However, this
-# option cannot handle dynamic or non-broadcast interfaces correctly.
-; bind interfaces only = true
-
-
-
-#### Debugging/Accounting ####
-
-# This tells Samba to use a separate log file for each machine
-# that connects
- log file = /var/log/samba/log.%m
-
-# Put a capping on the size of the log files (in Kb).
- max log size = 1000
-
-# If you want Samba to only log through syslog then set the following
-# parameter to 'yes'.
-; syslog only = no
-
-# We want Samba to log a minimum amount of information to syslog. Everything
-# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
-# through syslog you should set the following parameter to something higher.
- syslog = 0
-
-# Do something sensible when Samba crashes: mail the admin a backtrace
- panic action = /usr/share/samba/panic-action %d
-
-
-####### Authentication #######
-
-# "security = user" is always a good idea. This will require a Unix account
-# in this server for every user accessing the server. See
-# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
-# in the samba-doc package for details.
- security = user
-
-# You may wish to use password encryption. See the section on
-# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
- encrypt passwords = true
-
-# If you are using encrypted passwords, Samba will need to know what
-# password database type you are using.
- passdb backend = tdbsam
-
- obey pam restrictions = yes
-
-; guest account = nobody
- invalid users = root
-
-# This boolean parameter controls whether Samba attempts to sync the Unix
-# password with the SMB password when the encrypted SMB password in the
-# passdb is changed.
-; unix password sync = no
-
-# For Unix password sync to work on a Debian GNU/Linux system, the following
-# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
-# sending the correct chat script for the passwd program in Debian Sarge).
- passwd program = /usr/bin/passwd %u
- passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
-
-# This boolean controls whether PAM will be used for password changes
-# when requested by an SMB client instead of the program listed in
-# 'passwd program'. The default is 'no'.
-; pam password change = no
-
-########## Domains ###########
-
-# Is this machine able to authenticate users. Both PDC and BDC
-# must have this setting enabled. If you are the BDC you must
-# change the 'domain master' setting to no
-#
-; domain logons = yes
-#
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the location of the user's profile directory
-# from the client point of view)
-# The following required a [profiles] share to be setup on the
-# samba server (see below)
-; logon path = \\%N\profiles\%U
-# Another common choice is storing the profile in the user's home directory
-; logon path = \\%N\%U\profile
-
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the location of a user's home directory (from the client
-# point of view)
-; logon drive = H:
-; logon home = \\%N\%U
-
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the script to run during logon. The script must be stored
-# in the [netlogon] share
-# NOTE: Must be store in 'DOS' file format convention
-; logon script = logon.cmd
-
-# This allows Unix users to be created on the domain controller via the SAMR
-# RPC pipe. The example command creates a user account with a disabled Unix
-# password; please adapt to your needs
-; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
-
-########## Printing ##########
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-; load printers = yes
-
-# lpr(ng) printing. You may wish to override the location of the
-# printcap file
-; printing = bsd
-; printcap name = /etc/printcap
-
-# CUPS printing. See also the cupsaddsmb(8) manpage in the
-# cupsys-client package.
-; printing = cups
-; printcap name = cups
-
-# When using [print$], root is implicitly a 'printer admin', but you can
-# also give this right to other users to add drivers and set printer
-# properties
-; printer admin = @ntadmin
-
-
-############ Misc ############
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-; include = /home/samba/etc/smb.conf.%m
-
-# Most people will find that this option gives better performance.
-# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
-# for details
-# You may want to add the following on a Linux system:
-# SO_RCVBUF=8192 SO_SNDBUF=8192
- socket options = TCP_NODELAY
-
-# The following parameter is useful only if you have the linpopup package
-# installed. The samba maintainer and the linpopup maintainer are
-# working to ease installation and configuration of linpopup and samba.
-; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
-
-# Domain Master specifies Samba to be the Domain Master Browser. If this
-# machine will be configured as a BDC (a secondary logon server), you
-# must set this to 'no'; otherwise, the default behavior is recommended.
-; domain master = auto
-
-# Some defaults for winbind (make sure you're not using the ranges
-# for something else.)
-; idmap uid = 10000-20000
-; idmap gid = 10000-20000
-; template shell = /bin/bash
-;
-; The following was the default behaviour in sarge
-; but samba upstream reverted the default because it might induce
-; performance issues in large organizations
-; See #368251 for some of the consequences of *not* having
-; this setting and smb.conf(5) for all details
-;
-; winbind enum groups = yes
-; winbind enum users = yes
-
-#======================= Share Definitions =======================
-
-[homes]
- comment = Home Directories
- browseable = no
-
-# By default, the home directories are exported read-only. Change next
-# parameter to 'yes' if you want to be able to write to them.
- writable = no
-
-# File creation mask is set to 0700 for security reasons. If you want to
-# create files with group=rw permissions, set next parameter to 0775.
- create mask = 0700
-
-# Directory creation mask is set to 0700 for security reasons. If you want to
-# create dirs. with group=rw permissions, set next parameter to 0775.
- directory mask = 0700
-
-# Restrict access to home directories
-# to the one of the authenticated user
-# This might need tweaking when using external authentication schemes
- valid users = %S
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-# (you need to configure Samba to act as a domain controller too.)
-;[netlogon]
-; comment = Network Logon Service
-; path = /home/samba/netlogon
-; guest ok = yes
-; writable = no
-; share modes = no
-
-# Un-comment the following and create the profiles directory to store
-# users profiles (see the "logon path" option above)
-# (you need to configure Samba to act as a domain controller too.)
-# The path below should be writable by all users so that their
-# profile directory may be created the first time they log on
-;[profiles]
-; comment = Users profiles
-; path = /home/samba/profiles
-; guest ok = no
-; browseable = no
-; create mask = 0600
-; directory mask = 0700
-
-[printers]
- comment = All Printers
- browseable = no
- path = /var/spool/samba
- printable = yes
- public = no
- writable = no
- create mode = 0700
-
-# Windows clients look for this share name as a source of downloadable
-# printer drivers
-[print$]
- comment = Printer Drivers
- path = /var/lib/samba/printers
- browseable = yes
- read only = yes
- guest ok = no
-# Uncomment to allow remote administration of Windows print drivers.
-# Replace 'ntadmin' with the name of the group your admin users are
-# members of.
-; write list = root, @ntadmin
-
-# A sample share for sharing your CD-ROM with others.
-;[cdrom]
-; comment = Samba server's CD-ROM
-; writable = no
-; locking = no
-; path = /cdrom
-; public = yes
-
-# The next two parameters show how to auto-mount a CD-ROM when the
-# cdrom share is accesed. For this to work /etc/fstab must contain
-# an entry like this:
-#
-# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
-#
-# The CD-ROM gets unmounted automatically after the connection to the
-#
-# If you don't want to use auto-mounting/unmounting make sure the CD
-# is mounted on /cdrom
-#
-; preexec = /bin/mount /cdrom
-; postexec = /bin/umount /cdrom
-
+++ /dev/null
-#
-# Sample configuration file for the Samba suite for Debian GNU/Linux.
-#
-#
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options most of which
-# are not shown in this example
-#
-# Any line which starts with a ; (semi-colon) or a # (hash)
-# is a comment and is ignored. In this example we will use a #
-# for commentary and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command
-# "testparm" to check that you have not made any basic syntactic
-# errors.
-#
-
-#======================= Global Settings =======================
-
-[global]
-
-## Browsing/Identification ###
-
-# Change this to the workgroup/NT-domain name your Samba server will part of
- workgroup =
-
-# server string is the equivalent of the NT Description field
- server string = %h server
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
-; wins support = no
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-; wins server = w.x.y.z
-
-# This will prevent nmbd to search for NetBIOS names through DNS.
- dns proxy = no
-
-# What naming service and in what order should we use to resolve host names
-# to IP addresses
-; name resolve order = lmhosts host wins bcast
-
-#### Networking ####
-
-# The specific set of interfaces / networks to bind to
-# This can be either the interface name or an IP address/netmask;
-# interface names are normally preferred
-; interfaces = 127.0.0.0/8 eth0
-
-# Only bind to the named interfaces and/or networks; you must use the
-# 'interfaces' option above to use this.
-# It is recommended that you enable this feature if your Samba machine is
-# not protected by a firewall or is a firewall itself. However, this
-# option cannot handle dynamic or non-broadcast interfaces correctly.
-; bind interfaces only = true
-
-
-
-#### Debugging/Accounting ####
-
-# This tells Samba to use a separate log file for each machine
-# that connects
- log file = /var/log/samba/log.%m
-
-# Put a capping on the size of the log files (in Kb).
- max log size = 1000
-
-# If you want Samba to only log through syslog then set the following
-# parameter to 'yes'.
-; syslog only = no
-
-# We want Samba to log a minimum amount of information to syslog. Everything
-# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
-# through syslog you should set the following parameter to something higher.
- syslog = 0
-
-# Do something sensible when Samba crashes: mail the admin a backtrace
- panic action = /usr/share/samba/panic-action %d
-
-
-####### Authentication #######
-
-# "security = user" is always a good idea. This will require a Unix account
-# in this server for every user accessing the server. See
-# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
-# in the samba-doc package for details.
-; security = user
-
-# You may wish to use password encryption. See the section on
-# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
- encrypt passwords = true
-
-# If you are using encrypted passwords, Samba will need to know what
-# password database type you are using.
- passdb backend = tdbsam
-
- obey pam restrictions = yes
-
-; guest account = nobody
- invalid users = root
-
-# This boolean parameter controls whether Samba attempts to sync the Unix
-# password with the SMB password when the encrypted SMB password in the
-# passdb is changed.
-; unix password sync = no
-
-# For Unix password sync to work on a Debian GNU/Linux system, the following
-# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
-# sending the correct chat script for the passwd program in Debian Sarge).
- passwd program = /usr/bin/passwd %u
- passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
-
-# This boolean controls whether PAM will be used for password changes
-# when requested by an SMB client instead of the program listed in
-# 'passwd program'. The default is 'no'.
-; pam password change = no
-
-########## Domains ###########
-
-# Is this machine able to authenticate users. Both PDC and BDC
-# must have this setting enabled. If you are the BDC you must
-# change the 'domain master' setting to no
-#
-; domain logons = yes
-#
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the location of the user's profile directory
-# from the client point of view)
-# The following required a [profiles] share to be setup on the
-# samba server (see below)
-; logon path = \\%N\profiles\%U
-# Another common choice is storing the profile in the user's home directory
-; logon path = \\%N\%U\profile
-
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the location of a user's home directory (from the client
-# point of view)
-; logon drive = H:
-; logon home = \\%N\%U
-
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the script to run during logon. The script must be stored
-# in the [netlogon] share
-# NOTE: Must be store in 'DOS' file format convention
-; logon script = logon.cmd
-
-# This allows Unix users to be created on the domain controller via the SAMR
-# RPC pipe. The example command creates a user account with a disabled Unix
-# password; please adapt to your needs
-; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
-
-########## Printing ##########
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-; load printers = yes
-
-# lpr(ng) printing. You may wish to override the location of the
-# printcap file
-; printing = bsd
-; printcap name = /etc/printcap
-
-# CUPS printing. See also the cupsaddsmb(8) manpage in the
-# cupsys-client package.
-; printing = cups
-; printcap name = cups
-
-# When using [print$], root is implicitly a 'printer admin', but you can
-# also give this right to other users to add drivers and set printer
-# properties
-; printer admin = @ntadmin
-
-
-############ Misc ############
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-; include = /home/samba/etc/smb.conf.%m
-
-# Most people will find that this option gives better performance.
-# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
-# for details
-# You may want to add the following on a Linux system:
-# SO_RCVBUF=8192 SO_SNDBUF=8192
- socket options = TCP_NODELAY
-
-# The following parameter is useful only if you have the linpopup package
-# installed. The samba maintainer and the linpopup maintainer are
-# working to ease installation and configuration of linpopup and samba.
-; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
-
-# Domain Master specifies Samba to be the Domain Master Browser. If this
-# machine will be configured as a BDC (a secondary logon server), you
-# must set this to 'no'; otherwise, the default behavior is recommended.
-; domain master = auto
-
-# Some defaults for winbind (make sure you're not using the ranges
-# for something else.)
-; idmap uid = 10000-20000
-; idmap gid = 10000-20000
-; template shell = /bin/bash
-;
-; The following was the default behaviour in sarge
-; but samba upstream reverted the default because it might induce
-; performance issues in large organizations
-; See #368251 for some of the consequences of *not* having
-; this setting and smb.conf(5) for all details
-;
-; winbind enum groups = yes
-; winbind enum users = yes
-
-#======================= Share Definitions =======================
-
-[homes]
- comment = Home Directories
- browseable = no
-
-# By default, the home directories are exported read-only. Change next
-# parameter to 'yes' if you want to be able to write to them.
- writable = no
-
-# File creation mask is set to 0700 for security reasons. If you want to
-# create files with group=rw permissions, set next parameter to 0775.
- create mask = 0700
-
-# Directory creation mask is set to 0700 for security reasons. If you want to
-# create dirs. with group=rw permissions, set next parameter to 0775.
- directory mask = 0700
-
-# Restrict access to home directories
-# to the one of the authenticated user
-# This might need tweaking when using external authentication schemes
- valid users = %S
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-# (you need to configure Samba to act as a domain controller too.)
-;[netlogon]
-; comment = Network Logon Service
-; path = /home/samba/netlogon
-; guest ok = yes
-; writable = no
-; share modes = no
-
-# Un-comment the following and create the profiles directory to store
-# users profiles (see the "logon path" option above)
-# (you need to configure Samba to act as a domain controller too.)
-# The path below should be writable by all users so that their
-# profile directory may be created the first time they log on
-;[profiles]
-; comment = Users profiles
-; path = /home/samba/profiles
-; guest ok = no
-; browseable = no
-; create mask = 0600
-; directory mask = 0700
-
-[printers]
- comment = All Printers
- browseable = no
- path = /var/spool/samba
- printable = yes
- public = no
- writable = no
- create mode = 0700
-
-# Windows clients look for this share name as a source of downloadable
-# printer drivers
-[print$]
- comment = Printer Drivers
- path = /var/lib/samba/printers
- browseable = yes
- read only = yes
- guest ok = no
-# Uncomment to allow remote administration of Windows print drivers.
-# Replace 'ntadmin' with the name of the group your admin users are
-# members of.
-; write list = root, @ntadmin
-
-# A sample share for sharing your CD-ROM with others.
-;[cdrom]
-; comment = Samba server's CD-ROM
-; writable = no
-; locking = no
-; path = /cdrom
-; public = yes
-
-# The next two parameters show how to auto-mount a CD-ROM when the
-# cdrom share is accesed. For this to work /etc/fstab must contain
-# an entry like this:
-#
-# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
-#
-# The CD-ROM gets unmounted automatically after the connection to the
-#
-# If you don't want to use auto-mounting/unmounting make sure the CD
-# is mounted on /cdrom
-#
-; preexec = /bin/mount /cdrom
-; postexec = /bin/umount /cdrom
-
projects / carnet-upgrade.git / commitdiff