From: Valentin Vidic Date: Wed, 22 Apr 2009 15:08:48 +0000 (+0200) Subject: Handle smb.conf upgrade. X-Git-Tag: debian/5.0.0~52 X-Git-Url: http://ftp.carnet.hr/carnet-debian/scm?a=commitdiff_plain;h=d4bcc548adbc9687076ed2bf59ff2f152a218af3;p=carnet-upgrade.git Handle smb.conf upgrade. --- diff --git a/files/etc/samba/smb.conf.expect b/files/etc/samba/smb.conf.expect new file mode 100644 index 0000000..81fa8dd --- /dev/null +++ b/files/etc/samba/smb.conf.expect @@ -0,0 +1,305 @@ +# +# Sample configuration file for the Samba suite for Debian GNU/Linux. +# +# +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options most of which +# are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentary and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command +# "testparm" to check that you have not made any basic syntactic +# errors. +# + +#======================= Global Settings ======================= + +[global] + +## Browsing/Identification ### + +# Change this to the workgroup/NT-domain name your Samba server will part of + workgroup = + +# server string is the equivalent of the NT Description field + server string = %h server + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable its WINS Server +; wins support = no + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# This will prevent nmbd to search for NetBIOS names through DNS. + dns proxy = no + +# What naming service and in what order should we use to resolve host names +# to IP addresses +; name resolve order = lmhosts host wins bcast + +#### Networking #### + +# The specific set of interfaces / networks to bind to +# This can be either the interface name or an IP address/netmask; +# interface names are normally preferred +; interfaces = 127.0.0.0/8 eth0 + +# Only bind to the named interfaces and/or networks; you must use the +# 'interfaces' option above to use this. +# It is recommended that you enable this feature if your Samba machine is +# not protected by a firewall or is a firewall itself. However, this +# option cannot handle dynamic or non-broadcast interfaces correctly. +; bind interfaces only = true + + + +#### Debugging/Accounting #### + +# This tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 1000 + +# If you want Samba to only log through syslog then set the following +# parameter to 'yes'. +; syslog only = no + +# We want Samba to log a minimum amount of information to syslog. Everything +# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log +# through syslog you should set the following parameter to something higher. + syslog = 0 + +# Do something sensible when Samba crashes: mail the admin a backtrace + panic action = /usr/share/samba/panic-action %d + + +####### Authentication ####### + +# "security = user" is always a good idea. This will require a Unix account +# in this server for every user accessing the server. See +# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html +# in the samba-doc package for details. + security = user + +# You may wish to use password encryption. See the section on +# 'encrypt passwords' in the smb.conf(5) manpage before enabling. + encrypt passwords = true + +# If you are using encrypted passwords, Samba will need to know what +# password database type you are using. + passdb backend = tdbsam + + obey pam restrictions = yes + +; guest account = nobody + invalid users = root + +# This boolean parameter controls whether Samba attempts to sync the Unix +# password with the SMB password when the encrypted SMB password in the +# passdb is changed. +; unix password sync = no + +# For Unix password sync to work on a Debian GNU/Linux system, the following +# parameters must be set (thanks to Ian Kahan < for +# sending the correct chat script for the passwd program in Debian Sarge). + passwd program = /usr/bin/passwd %u + passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* . + +# This boolean controls whether PAM will be used for password changes +# when requested by an SMB client instead of the program listed in +# 'passwd program'. The default is 'no'. +; pam password change = no + +########## Domains ########### + +# Is this machine able to authenticate users. Both PDC and BDC +# must have this setting enabled. If you are the BDC you must +# change the 'domain master' setting to no +# +; domain logons = yes +# +# The following setting only takes effect if 'domain logons' is set +# It specifies the location of the user's profile directory +# from the client point of view) +# The following required a [profiles] share to be setup on the +# samba server (see below) +; logon path = \\%N\profiles\%U +# Another common choice is storing the profile in the user's home directory +; logon path = \\%N\%U\profile + +# The following setting only takes effect if 'domain logons' is set +# It specifies the location of a user's home directory (from the client +# point of view) +; logon drive = H: +; logon home = \\%N\%U + +# The following setting only takes effect if 'domain logons' is set +# It specifies the script to run during logon. The script must be stored +# in the [netlogon] share +# NOTE: Must be store in 'DOS' file format convention +; logon script = logon.cmd + +# This allows Unix users to be created on the domain controller via the SAMR +# RPC pipe. The example command creates a user account with a disabled Unix +# password; please adapt to your needs +; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u + +########## Printing ########## + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this +; load printers = yes + +# lpr(ng) printing. You may wish to override the location of the +# printcap file +; printing = bsd +; printcap name = /etc/printcap + +# CUPS printing. See also the cupsaddsmb(8) manpage in the +# cupsys-client package. +; printing = cups +; printcap name = cups + +# When using [print$], root is implicitly a 'printer admin', but you can +# also give this right to other users to add drivers and set printer +# properties +; printer admin = @ntadmin + + +############ Misc ############ + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /home/samba/etc/smb.conf.%m + +# Most people will find that this option gives better performance. +# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html +# for details +# You may want to add the following on a Linux system: +# SO_RCVBUF=8192 SO_SNDBUF=8192 + socket options = TCP_NODELAY + +# The following parameter is useful only if you have the linpopup package +# installed. The samba maintainer and the linpopup maintainer are +# working to ease installation and configuration of linpopup and samba. +; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & + +# Domain Master specifies Samba to be the Domain Master Browser. If this +# machine will be configured as a BDC (a secondary logon server), you +# must set this to 'no'; otherwise, the default behavior is recommended. +; domain master = auto + +# Some defaults for winbind (make sure you're not using the ranges +# for something else.) +; idmap uid = 10000-20000 +; idmap gid = 10000-20000 +; template shell = /bin/bash +; +; The following was the default behaviour in sarge +; but samba upstream reverted the default because it might induce +; performance issues in large organizations +; See #368251 for some of the consequences of *not* having +; this setting and smb.conf(5) for all details +; +; winbind enum groups = yes +; winbind enum users = yes + +#======================= Share Definitions ======================= + +[homes] + comment = Home Directories + browseable = no + +# By default, the home directories are exported read-only. Change next +# parameter to 'yes' if you want to be able to write to them. + writable = no + +# File creation mask is set to 0700 for security reasons. If you want to +# create files with group=rw permissions, set next parameter to 0775. + create mask = 0700 + +# Directory creation mask is set to 0700 for security reasons. If you want to +# create dirs. with group=rw permissions, set next parameter to 0775. + directory mask = 0700 + +# Restrict access to home directories +# to the one of the authenticated user +# This might need tweaking when using external authentication schemes + valid users = %S + +# Un-comment the following and create the netlogon directory for Domain Logons +# (you need to configure Samba to act as a domain controller too.) +;[netlogon] +; comment = Network Logon Service +; path = /home/samba/netlogon +; guest ok = yes +; writable = no +; share modes = no + +# Un-comment the following and create the profiles directory to store +# users profiles (see the "logon path" option above) +# (you need to configure Samba to act as a domain controller too.) +# The path below should be writable by all users so that their +# profile directory may be created the first time they log on +;[profiles] +; comment = Users profiles +; path = /home/samba/profiles +; guest ok = no +; browseable = no +; create mask = 0600 +; directory mask = 0700 + +[printers] + comment = All Printers + browseable = no + path = /var/spool/samba + printable = yes + public = no + writable = no + create mode = 0700 + +# Windows clients look for this share name as a source of downloadable +# printer drivers +[print$] + comment = Printer Drivers + path = /var/lib/samba/printers + browseable = yes + read only = yes + guest ok = no +# Uncomment to allow remote administration of Windows print drivers. +# Replace 'ntadmin' with the name of the group your admin users are +# members of. +; write list = root, @ntadmin + +# A sample share for sharing your CD-ROM with others. +;[cdrom] +; comment = Samba server's CD-ROM +; writable = no +; locking = no +; path = /cdrom +; public = yes + +# The next two parameters show how to auto-mount a CD-ROM when the +# cdrom share is accesed. For this to work /etc/fstab must contain +# an entry like this: +# +# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 +# +# The CD-ROM gets unmounted automatically after the connection to the +# +# If you don't want to use auto-mounting/unmounting make sure the CD +# is mounted on /cdrom +# +; preexec = /bin/mount /cdrom +; postexec = /bin/umount /cdrom + diff --git a/files/etc/samba/smb.conf.restore b/files/etc/samba/smb.conf.restore new file mode 100644 index 0000000..3d83185 --- /dev/null +++ b/files/etc/samba/smb.conf.restore @@ -0,0 +1,305 @@ +# +# Sample configuration file for the Samba suite for Debian GNU/Linux. +# +# +# This is the main Samba configuration file. You should read the +# smb.conf(5) manual page in order to understand the options listed +# here. Samba has a huge number of configurable options most of which +# are not shown in this example +# +# Any line which starts with a ; (semi-colon) or a # (hash) +# is a comment and is ignored. In this example we will use a # +# for commentary and a ; for parts of the config file that you +# may wish to enable +# +# NOTE: Whenever you modify this file you should run the command +# "testparm" to check that you have not made any basic syntactic +# errors. +# + +#======================= Global Settings ======================= + +[global] + +## Browsing/Identification ### + +# Change this to the workgroup/NT-domain name your Samba server will part of + workgroup = + +# server string is the equivalent of the NT Description field + server string = %h server + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable its WINS Server +; wins support = no + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# This will prevent nmbd to search for NetBIOS names through DNS. + dns proxy = no + +# What naming service and in what order should we use to resolve host names +# to IP addresses +; name resolve order = lmhosts host wins bcast + +#### Networking #### + +# The specific set of interfaces / networks to bind to +# This can be either the interface name or an IP address/netmask; +# interface names are normally preferred +; interfaces = 127.0.0.0/8 eth0 + +# Only bind to the named interfaces and/or networks; you must use the +# 'interfaces' option above to use this. +# It is recommended that you enable this feature if your Samba machine is +# not protected by a firewall or is a firewall itself. However, this +# option cannot handle dynamic or non-broadcast interfaces correctly. +; bind interfaces only = true + + + +#### Debugging/Accounting #### + +# This tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 1000 + +# If you want Samba to only log through syslog then set the following +# parameter to 'yes'. +; syslog only = no + +# We want Samba to log a minimum amount of information to syslog. Everything +# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log +# through syslog you should set the following parameter to something higher. + syslog = 0 + +# Do something sensible when Samba crashes: mail the admin a backtrace + panic action = /usr/share/samba/panic-action %d + + +####### Authentication ####### + +# "security = user" is always a good idea. This will require a Unix account +# in this server for every user accessing the server. See +# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html +# in the samba-doc package for details. +; security = user + +# You may wish to use password encryption. See the section on +# 'encrypt passwords' in the smb.conf(5) manpage before enabling. + encrypt passwords = true + +# If you are using encrypted passwords, Samba will need to know what +# password database type you are using. + passdb backend = tdbsam + + obey pam restrictions = yes + +; guest account = nobody + invalid users = root + +# This boolean parameter controls whether Samba attempts to sync the Unix +# password with the SMB password when the encrypted SMB password in the +# passdb is changed. +; unix password sync = no + +# For Unix password sync to work on a Debian GNU/Linux system, the following +# parameters must be set (thanks to Ian Kahan < for +# sending the correct chat script for the passwd program in Debian Sarge). + passwd program = /usr/bin/passwd %u + passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* . + +# This boolean controls whether PAM will be used for password changes +# when requested by an SMB client instead of the program listed in +# 'passwd program'. The default is 'no'. +; pam password change = no + +########## Domains ########### + +# Is this machine able to authenticate users. Both PDC and BDC +# must have this setting enabled. If you are the BDC you must +# change the 'domain master' setting to no +# +; domain logons = yes +# +# The following setting only takes effect if 'domain logons' is set +# It specifies the location of the user's profile directory +# from the client point of view) +# The following required a [profiles] share to be setup on the +# samba server (see below) +; logon path = \\%N\profiles\%U +# Another common choice is storing the profile in the user's home directory +; logon path = \\%N\%U\profile + +# The following setting only takes effect if 'domain logons' is set +# It specifies the location of a user's home directory (from the client +# point of view) +; logon drive = H: +; logon home = \\%N\%U + +# The following setting only takes effect if 'domain logons' is set +# It specifies the script to run during logon. The script must be stored +# in the [netlogon] share +# NOTE: Must be store in 'DOS' file format convention +; logon script = logon.cmd + +# This allows Unix users to be created on the domain controller via the SAMR +# RPC pipe. The example command creates a user account with a disabled Unix +# password; please adapt to your needs +; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u + +########## Printing ########## + +# If you want to automatically load your printer list rather +# than setting them up individually then you'll need this +; load printers = yes + +# lpr(ng) printing. You may wish to override the location of the +# printcap file +; printing = bsd +; printcap name = /etc/printcap + +# CUPS printing. See also the cupsaddsmb(8) manpage in the +# cupsys-client package. +; printing = cups +; printcap name = cups + +# When using [print$], root is implicitly a 'printer admin', but you can +# also give this right to other users to add drivers and set printer +# properties +; printer admin = @ntadmin + + +############ Misc ############ + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting +; include = /home/samba/etc/smb.conf.%m + +# Most people will find that this option gives better performance. +# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html +# for details +# You may want to add the following on a Linux system: +# SO_RCVBUF=8192 SO_SNDBUF=8192 + socket options = TCP_NODELAY + +# The following parameter is useful only if you have the linpopup package +# installed. The samba maintainer and the linpopup maintainer are +# working to ease installation and configuration of linpopup and samba. +; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & + +# Domain Master specifies Samba to be the Domain Master Browser. If this +# machine will be configured as a BDC (a secondary logon server), you +# must set this to 'no'; otherwise, the default behavior is recommended. +; domain master = auto + +# Some defaults for winbind (make sure you're not using the ranges +# for something else.) +; idmap uid = 10000-20000 +; idmap gid = 10000-20000 +; template shell = /bin/bash +; +; The following was the default behaviour in sarge +; but samba upstream reverted the default because it might induce +; performance issues in large organizations +; See #368251 for some of the consequences of *not* having +; this setting and smb.conf(5) for all details +; +; winbind enum groups = yes +; winbind enum users = yes + +#======================= Share Definitions ======================= + +[homes] + comment = Home Directories + browseable = no + +# By default, the home directories are exported read-only. Change next +# parameter to 'yes' if you want to be able to write to them. + writable = no + +# File creation mask is set to 0700 for security reasons. If you want to +# create files with group=rw permissions, set next parameter to 0775. + create mask = 0700 + +# Directory creation mask is set to 0700 for security reasons. If you want to +# create dirs. with group=rw permissions, set next parameter to 0775. + directory mask = 0700 + +# Restrict access to home directories +# to the one of the authenticated user +# This might need tweaking when using external authentication schemes + valid users = %S + +# Un-comment the following and create the netlogon directory for Domain Logons +# (you need to configure Samba to act as a domain controller too.) +;[netlogon] +; comment = Network Logon Service +; path = /home/samba/netlogon +; guest ok = yes +; writable = no +; share modes = no + +# Un-comment the following and create the profiles directory to store +# users profiles (see the "logon path" option above) +# (you need to configure Samba to act as a domain controller too.) +# The path below should be writable by all users so that their +# profile directory may be created the first time they log on +;[profiles] +; comment = Users profiles +; path = /home/samba/profiles +; guest ok = no +; browseable = no +; create mask = 0600 +; directory mask = 0700 + +[printers] + comment = All Printers + browseable = no + path = /var/spool/samba + printable = yes + public = no + writable = no + create mode = 0700 + +# Windows clients look for this share name as a source of downloadable +# printer drivers +[print$] + comment = Printer Drivers + path = /var/lib/samba/printers + browseable = yes + read only = yes + guest ok = no +# Uncomment to allow remote administration of Windows print drivers. +# Replace 'ntadmin' with the name of the group your admin users are +# members of. +; write list = root, @ntadmin + +# A sample share for sharing your CD-ROM with others. +;[cdrom] +; comment = Samba server's CD-ROM +; writable = no +; locking = no +; path = /cdrom +; public = yes + +# The next two parameters show how to auto-mount a CD-ROM when the +# cdrom share is accesed. For this to work /etc/fstab must contain +# an entry like this: +# +# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 +# +# The CD-ROM gets unmounted automatically after the connection to the +# +# If you don't want to use auto-mounting/unmounting make sure the CD +# is mounted on /cdrom +# +; preexec = /bin/mount /cdrom +; postexec = /bin/umount /cdrom +