Update config files.

[carnet-upgrade.git] / files / etc / console-tools / config.restore

diff --git a/files/etc/console-tools/config.restore b/files/etc/console-tools/config.restore
deleted file mode 100644 (file)
index cc27661..0000000
--- a/files/etc/console-tools/config.restore
+++ /dev/null
@@ -1,72 +0,0 @@
-#
-# This files tells the console-tools package:
-#
-# - whether to load a specific font and boot (and maybe a screen-font map,
-# but you should avoid that if possible).
-# - whether to setup an Application-Charset Map other than the default CP437.
-# - whether to start "vcstime" to have time on all text VC'S.
-#
-# You can also specify per-VC settings by suffixing variable names as in
-# the examples below. This only works on framebuffer devices.
-#
-# CAVEATS:
-#
-# - When using the new framebuffer devices, the "global setting" for a font 
-# only affects the current console (ie., at boot-time, the first one)
-# - ACM setting involves 2 steps (maybe loading a user ACM, and activating
-# it on a given charset slot - see charset(1) for details), the 1st of which
-# affects the entire system, but the 2nd of which only affects the current
-# VC (ie., at boot-time, the first one).  So that if you want to use the same 
-# ACM on all VCs, you have to specify "APP_CHARSET_MAP_vc<N>=user" for all
-# relevant values of <N>.
-#
-# Example:
-#
-#SCREEN_FONT=iso01.f16
-#SCREEN_FONT_vc2=LatArCyrHeb-16
-#
-#APP_CHARSET_MAP=iso05
-#APP_CHARSET_MAP_vc2=user
-#
-# Set the following - more euro-friendly default than kernel font.
-# SCREEN_FONT=latcyrheb-sun16.psf
-
-#DO_VCSTIME=yes
-#
-# Forget this one unless you _know_ it is necessary for your font:
-#SCREEN_FONT_MAP=iso01
-
-#  **** screen saver/DPMS settings: all VCs ****
-# These settings are commented by default to avoid the chance of damage to
-# very old monitors that don't support DPMS signalling.
-
-# screen blanking timeout.  monitor remains on, but the screen is cleared to
-# range: 0-60 min (0==never)  kernels I've looked at default to 10 minutes.
-# (see linux/drivers/char/console.c)
-BLANK_TIME=30
-
-# blanking method (VESA DPMS mode to use after BLANK_TIME, before powerdown):
-# on: the default, no DPMS signalling. near instant powerup, no power saving
-# vsync: DPMS Standby mode. nearly instant recovery, uses 110/120W (17" screen)
-# hsync: DPMS Suspend mode. typically 3s recovery, uses 15/120W (17" screen)
-# powerdown,off: DPMS Off mode, typ. 10s recovery, uses  5/120W (17" screen)
-
-# Those values are for my 17" Mag, but some monitors do suspend the same as
-# standby.  xset dpms force {off|standby|suspend|on} is useful for this, if X
-# supports DPMS on your video card.  Set X's DPMS screensaver with xset dpms
-# or use option power_saver in XF86Config
-#
-# DPMS set by default to on, because hsync can cause problems on certain
-# hardware, such as Armada E500 laptops
-BLANK_DPMS=off
-
-# Powerdown time.  The console will go to DPMS Off mode POWERDOWN_TIME
-# minutes _after_ blanking.  (POWERDOWN_TIME + BLANK_TIME after the last input)
-POWERDOWN_TIME=30
-
-# rate and delay can get only specific values, consult kbdrate(1) for help
-#KEYBOARD_RATE="30"
-#KEYBOARD_DELAY="250"
-
-# Turn on numlock by default
-#LEDS=+num