Update restore files.

[carnet-upgrade.git] / files / etc / console-tools / config.restore

diff --git a/files/etc/console-tools/config.restore b/files/etc/console-tools/config.restore
new file mode 100644 (file)
index 0000000..cc27661
--- /dev/null
+++ b/files/etc/console-tools/config.restore
@@ -0,0 +1,72 @@
+#
+# This files tells the console-tools package:
+#
+# - whether to load a specific font and boot (and maybe a screen-font map,
+# but you should avoid that if possible).
+# - whether to setup an Application-Charset Map other than the default CP437.
+# - whether to start "vcstime" to have time on all text VC'S.
+#
+# You can also specify per-VC settings by suffixing variable names as in
+# the examples below. This only works on framebuffer devices.
+#
+# CAVEATS:
+#
+# - When using the new framebuffer devices, the "global setting" for a font 
+# only affects the current console (ie., at boot-time, the first one)
+# - ACM setting involves 2 steps (maybe loading a user ACM, and activating
+# it on a given charset slot - see charset(1) for details), the 1st of which
+# affects the entire system, but the 2nd of which only affects the current
+# VC (ie., at boot-time, the first one).  So that if you want to use the same 
+# ACM on all VCs, you have to specify "APP_CHARSET_MAP_vc<N>=user" for all
+# relevant values of <N>.
+#
+# Example:
+#
+#SCREEN_FONT=iso01.f16
+#SCREEN_FONT_vc2=LatArCyrHeb-16
+#
+#APP_CHARSET_MAP=iso05
+#APP_CHARSET_MAP_vc2=user
+#
+# Set the following - more euro-friendly default than kernel font.
+# SCREEN_FONT=latcyrheb-sun16.psf
+
+#DO_VCSTIME=yes
+#
+# Forget this one unless you _know_ it is necessary for your font:
+#SCREEN_FONT_MAP=iso01
+
+#  **** screen saver/DPMS settings: all VCs ****
+# These settings are commented by default to avoid the chance of damage to
+# very old monitors that don't support DPMS signalling.
+
+# screen blanking timeout.  monitor remains on, but the screen is cleared to
+# range: 0-60 min (0==never)  kernels I've looked at default to 10 minutes.
+# (see linux/drivers/char/console.c)
+BLANK_TIME=30
+
+# blanking method (VESA DPMS mode to use after BLANK_TIME, before powerdown):
+# on: the default, no DPMS signalling. near instant powerup, no power saving
+# vsync: DPMS Standby mode. nearly instant recovery, uses 110/120W (17" screen)
+# hsync: DPMS Suspend mode. typically 3s recovery, uses 15/120W (17" screen)
+# powerdown,off: DPMS Off mode, typ. 10s recovery, uses  5/120W (17" screen)
+
+# Those values are for my 17" Mag, but some monitors do suspend the same as
+# standby.  xset dpms force {off|standby|suspend|on} is useful for this, if X
+# supports DPMS on your video card.  Set X's DPMS screensaver with xset dpms
+# or use option power_saver in XF86Config
+#
+# DPMS set by default to on, because hsync can cause problems on certain
+# hardware, such as Armada E500 laptops
+BLANK_DPMS=off
+
+# Powerdown time.  The console will go to DPMS Off mode POWERDOWN_TIME
+# minutes _after_ blanking.  (POWERDOWN_TIME + BLANK_TIME after the last input)
+POWERDOWN_TIME=30
+
+# rate and delay can get only specific values, consult kbdrate(1) for help
+#KEYBOARD_RATE="30"
+#KEYBOARD_DELAY="250"
+
+# Turn on numlock by default
+#LEDS=+num