+++ /dev/null
-##
-## radiusd.conf -- FreeRADIUS server configuration file.
-##
-## http://www.freeradius.org/
-## $Id: radiusd.conf.in,v 1.188.2.4.2.11 2006/04/20 18:40:29 aland Exp $
-##
-
-# The location of other config files and
-# logfiles are declared in this file
-#
-# Also general configuration for modules can be done
-# in this file, it is exported through the API to
-# modules that ask for it.
-#
-# The configuration variables defined here are of the form ${foo}
-# They are local to this file, and do not change from request to
-# request.
-#
-# The per-request variables are of the form %{Attribute-Name}, and
-# are taken from the values of the attribute in the incoming
-# request. See 'doc/variables.txt' for more information.
-
-prefix = /usr
-exec_prefix = /usr
-sysconfdir = /etc
-localstatedir = /var
-sbindir = ${exec_prefix}/sbin
-logdir = /var/log/freeradius
-raddbdir = /etc/freeradius
-radacctdir = ${logdir}/radacct
-
-# Location of config and logfiles.
-confdir = ${raddbdir}
-run_dir = ${localstatedir}/run/freeradius
-
-#
-# The logging messages for the server are appended to the
-# tail of this file.
-#
-log_file = ${logdir}/radius.log
-
-#
-# libdir: Where to find the rlm_* modules.
-#
-# This should be automatically set at configuration time.
-#
-# If the server builds and installs, but fails at execution time
-# with an 'undefined symbol' error, then you can use the libdir
-# directive to work around the problem.
-#
-# The cause is usually that a library has been installed on your
-# system in a place where the dynamic linker CANNOT find it. When
-# executing as root (or another user), your personal environment MAY
-# be set up to allow the dynamic linker to find the library. When
-# executing as a daemon, FreeRADIUS MAY NOT have the same
-# personalized configuration.
-#
-# To work around the problem, find out which library contains that symbol,
-# and add the directory containing that library to the end of 'libdir',
-# with a colon separating the directory names. NO spaces are allowed.
-#
-# e.g. libdir = /usr/local/lib:/opt/package/lib
-#
-# You can also try setting the LD_LIBRARY_PATH environment variable
-# in a script which starts the server.
-#
-# If that does not work, then you can re-configure and re-build the
-# server to NOT use shared libraries, via:
-#
-# ./configure --disable-shared
-# make
-# make install
-#
-libdir = /usr/lib/freeradius
-
-# pidfile: Where to place the PID of the RADIUS server.
-#
-# The server may be signalled while it's running by using this
-# file.
-#
-# This file is written when ONLY running in daemon mode.
-#
-# e.g.: kill -HUP `cat /var/run/freeradius/freeradius.pid`
-#
-pidfile = ${run_dir}/freeradius.pid
-
-
-# user/group: The name (or #number) of the user/group to run radiusd as.
-#
-# If these are commented out, the server will run as the user/group
-# that started it. In order to change to a different user/group, you
-# MUST be root ( or have root privleges ) to start the server.
-#
-# We STRONGLY recommend that you run the server with as few permissions
-# as possible. That is, if you're not using shadow passwords, the
-# user and group items below should be set to 'nobody'.
-#
-# On SCO (ODT 3) use "user = nouser" and "group = nogroup".
-#
-# NOTE that some kernels refuse to setgid(group) when the value of
-# (unsigned)group is above 60000; don't use group nobody on these systems!
-#
-# On systems with shadow passwords, you might have to set 'group = shadow'
-# for the server to be able to read the shadow password file. If you can
-# authenticate users while in debug mode, but not in daemon mode, it may be
-# that the debugging mode server is running as a user that can read the
-# shadow info, and the user listed below can not.
-#
-user = freerad
-group = freerad
-
-# max_request_time: The maximum time (in seconds) to handle a request.
-#
-# Requests which take more time than this to process may be killed, and
-# a REJECT message is returned.
-#
-# WARNING: If you notice that requests take a long time to be handled,
-# then this MAY INDICATE a bug in the server, in one of the modules
-# used to handle a request, OR in your local configuration.
-#
-# This problem is most often seen when using an SQL database. If it takes
-# more than a second or two to receive an answer from the SQL database,
-# then it probably means that you haven't indexed the database. See your
-# SQL server documentation for more information.
-#
-# Useful range of values: 5 to 120
-#
-max_request_time = 30
-
-# delete_blocked_requests: If the request takes MORE THAN 'max_request_time'
-# to be handled, then maybe the server should delete it.
-#
-# If you're running in threaded, or thread pool mode, this setting
-# should probably be 'no'. Setting it to 'yes' when using a threaded
-# server MAY cause the server to crash!
-#
-delete_blocked_requests = no
-
-# cleanup_delay: The time to wait (in seconds) before cleaning up
-# a reply which was sent to the NAS.
-#
-# The RADIUS request is normally cached internally for a short period
-# of time, after the reply is sent to the NAS. The reply packet may be
-# lost in the network, and the NAS will not see it. The NAS will then
-# re-send the request, and the server will respond quickly with the
-# cached reply.
-#
-# If this value is set too low, then duplicate requests from the NAS
-# MAY NOT be detected, and will instead be handled as seperate requests.
-#
-# If this value is set too high, then the server will cache too many
-# requests, and some new requests may get blocked. (See 'max_requests'.)
-#
-# Useful range of values: 2 to 10
-#
-cleanup_delay = 5
-
-# max_requests: The maximum number of requests which the server keeps
-# track of. This should be 256 multiplied by the number of clients.
-# e.g. With 4 clients, this number should be 1024.
-#
-# If this number is too low, then when the server becomes busy,
-# it will not respond to any new requests, until the 'cleanup_delay'
-# time has passed, and it has removed the old requests.
-#
-# If this number is set too high, then the server will use a bit more
-# memory for no real benefit.
-#
-# If you aren't sure what it should be set to, it's better to set it
-# too high than too low. Setting it to 1000 per client is probably
-# the highest it should be.
-#
-# Useful range of values: 256 to infinity
-#
-max_requests = 1024
-
-# bind_address: Make the server listen on a particular IP address, and
-# send replies out from that address. This directive is most useful
-# for machines with multiple IP addresses on one interface.
-#
-# It can either contain "*", or an IP address, or a fully qualified
-# Internet domain name. The default is "*"
-#
-# As of 1.0, you can also use the "listen" directive. See below for
-# more information.
-#
-bind_address = *
-
-# port: Allows you to bind FreeRADIUS to a specific port.
-#
-# The default port that most NAS boxes use is 1645, which is historical.
-# RFC 2138 defines 1812 to be the new port. Many new servers and
-# NAS boxes use 1812, which can create interoperability problems.
-#
-# The port is defined here to be 0 so that the server will pick up
-# the machine's local configuration for the radius port, as defined
-# in /etc/services.
-#
-# If you want to use the default RADIUS port as defined on your server,
-# (usually through 'grep radius /etc/services') set this to 0 (zero).
-#
-# A port given on the command-line via '-p' over-rides this one.
-#
-# As of 1.0, you can also use the "listen" directive. See below for
-# more information.
-#
-port = 0
-
-#
-# By default, the server uses "bind_address" to listen to all IP's
-# on a machine, or just one IP. The "port" configuration is used
-# to select the authentication port used when listening on those
-# addresses.
-#
-# If you want the server to listen on additional addresses, you can
-# use the "listen" section. A sample section (commented out) is included
-# below. This "listen" section duplicates the functionality of the
-# "bind_address" and "port" configuration entries, but it only listens
-# for authentication packets.
-#
-# If you comment out the "bind_address" and "port" configuration entries,
-# then it becomes possible to make the server accept only accounting,
-# or authentication packets. Previously, it always listened for both
-# types of packets, and it was impossible to make it listen for only
-# one type of packet.
-#
-#listen {
- # IP address on which to listen.
- # Allowed values are:
- # dotted quad (1.2.3.4)
- # hostname (radius.example.com)
- # wildcard (*)
-# ipaddr = *
-
- # Port on which to listen.
- # Allowed values are:
- # integer port number (1812)
- # 0 means "use /etc/services for the proper port"
-# port = 0
-
- # Type of packets to listen for.
- # Allowed values are:
- # auth listen for authentication packets
- # acct listen for accounting packets
- #
-# type = auth
-#}
-
-
-# hostname_lookups: Log the names of clients or just their IP addresses
-# e.g., www.freeradius.org (on) or 206.47.27.232 (off).
-#
-# The default is 'off' because it would be overall better for the net
-# if people had to knowingly turn this feature on, since enabling it
-# means that each client request will result in AT LEAST one lookup
-# request to the nameserver. Enabling hostname_lookups will also
-# mean that your server may stop randomly for 30 seconds from time
-# to time, if the DNS requests take too long.
-#
-# Turning hostname lookups off also means that the server won't block
-# for 30 seconds, if it sees an IP address which has no name associated
-# with it.
-#
-# allowed values: {no, yes}
-#
-hostname_lookups = no
-
-# Core dumps are a bad thing. This should only be set to 'yes'
-# if you're debugging a problem with the server.
-#
-# allowed values: {no, yes}
-#
-allow_core_dumps = no
-
-# Regular expressions
-#
-# These items are set at configure time. If they're set to "yes",
-# then setting them to "no" turns off regular expression support.
-#
-# If they're set to "no" at configure time, then setting them to "yes"
-# WILL NOT WORK. It will give you an error.
-#
-regular_expressions = yes
-extended_expressions = yes
-
-# Log the full User-Name attribute, as it was found in the request.
-#
-# allowed values: {no, yes}
-#
-log_stripped_names = yes
-
-# Log authentication requests to the log file.
-#
-# allowed values: {no, yes}
-#
-log_auth = yes
-
-# Log passwords with the authentication requests.
-# log_auth_badpass - logs password if it's rejected
-# log_auth_goodpass - logs password if it's correct
-#
-# allowed values: {no, yes}
-#
-log_auth_badpass = no
-log_auth_goodpass = no
-
-# usercollide: Turn "username collision" code on and off. See the
-# "doc/duplicate-users" file
-#
-# WARNING
-# !!!!!!! Setting this to "yes" may result in the server behaving
-# !!!!!!! strangely. The "username collision" code will ONLY work
-# !!!!!!! with clear-text passwords. Even then, it may not do what
-# !!!!!!! you want, or what you expect.
-# !!!!!!!
-# !!!!!!! We STRONGLY RECOMMEND that you do not use this feature,
-# !!!!!!! and that you find another way of acheiving the same goal.
-# !!!!!!!
-# !!!!!!! e,g. module fail-over. See 'doc/configurable_failover'
-# WARNING
-#
-usercollide = no
-
-# lower_user / lower_pass:
-# Lower case the username/password "before" or "after"
-# attempting to authenticate.
-#
-# If "before", the server will first modify the request and then try
-# to auth the user. If "after", the server will first auth using the
-# values provided by the user. If that fails it will reprocess the
-# request after modifying it as you specify below.
-#
-# This is as close as we can get to case insensitivity. It is the
-# admin's job to ensure that the username on the auth db side is
-# *also* lowercase to make this work
-#
-# Default is 'no' (don't lowercase values)
-# Valid values = "before" / "after" / "no"
-#
-lower_user = yes
-lower_pass = no
-
-# nospace_user / nospace_pass:
-#
-# Some users like to enter spaces in their username or password
-# incorrectly. To save yourself the tech support call, you can
-# eliminate those spaces here:
-#
-# Default is 'no' (don't remove spaces)
-# Valid values = "before" / "after" / "no" (explanation above)
-#
-nospace_user = before
-nospace_pass = no
-
-# The program to execute to do concurrency checks.
-checkrad = ${sbindir}/checkrad
-
-# SECURITY CONFIGURATION
-#
-# There may be multiple methods of attacking on the server. This
-# section holds the configuration items which minimize the impact
-# of those attacks
-#
-security {
- #
- # max_attributes: The maximum number of attributes
- # permitted in a RADIUS packet. Packets which have MORE
- # than this number of attributes in them will be dropped.
- #
- # If this number is set too low, then no RADIUS packets
- # will be accepted.
- #
- # If this number is set too high, then an attacker may be
- # able to send a small number of packets which will cause
- # the server to use all available memory on the machine.
- #
- # Setting this number to 0 means "allow any number of attributes"
- max_attributes = 200
-
- #
- # reject_delay: When sending an Access-Reject, it can be
- # delayed for a few seconds. This may help slow down a DoS
- # attack. It also helps to slow down people trying to brute-force
- # crack a users password.
- #
- # Setting this number to 0 means "send rejects immediately"
- #
- # If this number is set higher than 'cleanup_delay', then the
- # rejects will be sent at 'cleanup_delay' time, when the request
- # is deleted from the internal cache of requests.
- #
- # Useful ranges: 1 to 5
- reject_delay = 0
-
- #
- # status_server: Whether or not the server will respond
- # to Status-Server requests.
- #
- # Normally this should be set to "no", because they're useless.
- # See: http://www.freeradius.org/rfc/rfc2865.html#Keep-Alives
- #
- # However, certain NAS boxes may require them.
- #
- # When sent a Status-Server message, the server responds with
- # an Access-Accept packet, containing a Reply-Message attribute,
- # which is a string describing how long the server has been
- # running.
- #
- status_server = no
-}
-
-# PROXY CONFIGURATION
-#
-# proxy_requests: Turns proxying of RADIUS requests on or off.
-#
-# The server has proxying turned on by default. If your system is NOT
-# set up to proxy requests to another server, then you can turn proxying
-# off here. This will save a small amount of resources on the server.
-#
-# If you have proxying turned off, and your configuration files say
-# to proxy a request, then an error message will be logged.
-#
-# To disable proxying, change the "yes" to "no", and comment the
-# $INCLUDE line.
-#
-# allowed values: {no, yes}
-#
-proxy_requests = yes
-$INCLUDE ${confdir}/proxy.conf
-
-
-# CLIENTS CONFIGURATION
-#
-# Client configuration is defined in "clients.conf".
-#
-
-# The 'clients.conf' file contains all of the information from the old
-# 'clients' and 'naslist' configuration files. We recommend that you
-# do NOT use 'client's or 'naslist', although they are still
-# supported.
-#
-# Anything listed in 'clients.conf' will take precedence over the
-# information from the old-style configuration files.
-#
-$INCLUDE ${confdir}/clients.conf
-
-
-# SNMP CONFIGURATION
-#
-# Snmp configuration is only valid if SNMP support was enabled
-# at compile time.
-#
-# To enable SNMP querying of the server, set the value of the
-# 'snmp' attribute to 'yes'
-#
-#snmp = no
-#$INCLUDE ${confdir}/snmp.conf
-
-
-# THREAD POOL CONFIGURATION
-#
-# The thread pool is a long-lived group of threads which
-# take turns (round-robin) handling any incoming requests.
-#
-# You probably want to have a few spare threads around,
-# so that high-load situations can be handled immediately. If you
-# don't have any spare threads, then the request handling will
-# be delayed while a new thread is created, and added to the pool.
-#
-# You probably don't want too many spare threads around,
-# otherwise they'll be sitting there taking up resources, and
-# not doing anything productive.
-#
-# The numbers given below should be adequate for most situations.
-#
-thread pool {
- # Number of servers to start initially --- should be a reasonable
- # ballpark figure.
- start_servers = 5
-
- # Limit on the total number of servers running.
- #
- # If this limit is ever reached, clients will be LOCKED OUT, so it
- # should NOT BE SET TOO LOW. It is intended mainly as a brake to
- # keep a runaway server from taking the system with it as it spirals
- # down...
- #
- # You may find that the server is regularly reaching the
- # 'max_servers' number of threads, and that increasing
- # 'max_servers' doesn't seem to make much difference.
- #
- # If this is the case, then the problem is MOST LIKELY that
- # your back-end databases are taking too long to respond, and
- # are preventing the server from responding in a timely manner.
- #
- # The solution is NOT do keep increasing the 'max_servers'
- # value, but instead to fix the underlying cause of the
- # problem: slow database, or 'hostname_lookups=yes'.
- #
- # For more information, see 'max_request_time', above.
- #
- max_servers = 32
-
- # Server-pool size regulation. Rather than making you guess
- # how many servers you need, FreeRADIUS dynamically adapts to
- # the load it sees, that is, it tries to maintain enough
- # servers to handle the current load, plus a few spare
- # servers to handle transient load spikes.
- #
- # It does this by periodically checking how many servers are
- # waiting for a request. If there are fewer than
- # min_spare_servers, it creates a new spare. If there are
- # more than max_spare_servers, some of the spares die off.
- # The default values are probably OK for most sites.
- #
- min_spare_servers = 3
- max_spare_servers = 10
-
- # There may be memory leaks or resource allocation problems with
- # the server. If so, set this value to 300 or so, so that the
- # resources will be cleaned up periodically.
- #
- # This should only be necessary if there are serious bugs in the
- # server which have not yet been fixed.
- #
- # '0' is a special value meaning 'infinity', or 'the servers never
- # exit'
- max_requests_per_server = 0
-}
-
-# MODULE CONFIGURATION
-#
-# The names and configuration of each module is located in this section.
-#
-# After the modules are defined here, they may be referred to by name,
-# in other sections of this configuration file.
-#
-modules {
- #
- # Each module has a configuration as follows:
- #
- # name [ instance ] {
- # config_item = value
- # ...
- # }
- #
- # The 'name' is used to load the 'rlm_name' library
- # which implements the functionality of the module.
- #
- # The 'instance' is optional. To have two different instances
- # of a module, it first must be referred to by 'name'.
- # The different copies of the module are then created by
- # inventing two 'instance' names, e.g. 'instance1' and 'instance2'
- #
- # The instance names can then be used in later configuration
- # INSTEAD of the original 'name'. See the 'radutmp' configuration
- # below for an example.
- #
-
- # PAP module to authenticate users based on their stored password
- #
- # Supports multiple encryption schemes
- # clear: Clear text
- # crypt: Unix crypt
- # md5: MD5 ecnryption
- # sha1: SHA1 encryption.
- # DEFAULT: crypt
-# pap {
-# encryption_scheme = crypt
-# }
-
- # CHAP module
- #
- # To authenticate requests containing a CHAP-Password attribute.
- #
-# chap {
-# authtype = CHAP
-# }
-
- # Pluggable Authentication Modules
- #
- # For Linux, see:
- # http://www.kernel.org/pub/linux/libs/pam/index.html
- #
- # WARNING: On many systems, the system PAM libraries have
- # memory leaks! We STRONGLY SUGGEST that you do not
- # use PAM for authentication, due to those memory leaks.
- #
-# pam {
- #
- # The name to use for PAM authentication.
- # PAM looks in /etc/pam.d/${pam_auth_name}
- # for it's configuration. See 'redhat/radiusd-pam'
- # for a sample PAM configuration file.
- #
- # Note that any Pam-Auth attribute set in the 'authorize'
- # section will over-ride this one.
- #
-# pam_auth = radiusd
-# }
-
- # Unix /etc/passwd style authentication
- #
-# unix {
- #
- # Cache /etc/passwd, /etc/shadow, and /etc/group
- #
- # The default is to NOT cache them.
- #
- # For FreeBSD and NetBSD, you do NOT want to enable
- # the cache, as it's password lookups are done via a
- # database, so set this value to 'no'.
- #
- # Some systems (e.g. RedHat Linux with pam_pwbd) can
- # take *seconds* to check a password, when th passwd
- # file containing 1000's of entries. For those systems,
- # you should set the cache value to 'yes', and set
- # the locations of the 'passwd', 'shadow', and 'group'
- # files, below.
- #
- # allowed values: {no, yes}
-# cache = no
-
- # Reload the cache every 600 seconds (10mins). 0 to disable.
-# cache_reload = 600
-
- #
- # Define the locations of the normal passwd, shadow, and
- # group files.
- #
- # 'shadow' is commented out by default, because not all
- # systems have shadow passwords.
- #
- # To force the module to use the system password functions,
- # instead of reading the files, leave the following entries
- # commented out.
- #
- # This is required for some systems, like FreeBSD,
- # and Mac OSX.
- #
- # passwd = /etc/passwd
-# shadow = /etc/shadow
- # group = /etc/group
-
- #
- # The location of the "wtmp" file.
- # This should be moved to it's own module soon.
- #
- # The only use for 'radlast'. If you don't use
- # 'radlast', then you can comment out this item.
- #
-# radwtmp = ${logdir}/radwtmp
-# }
-
- # Extensible Authentication Protocol
- #
- # For all EAP related authentications.
- # Now in another file, because it is very large.
- #
-$INCLUDE ${confdir}/eap.conf
-
- # Microsoft CHAP authentication
- #
- # This module supports MS-CHAP and MS-CHAPv2 authentication.
- # It also enforces the SMB-Account-Ctrl attribute.
- #
-# mschap {
- #
- # As of 0.9, the mschap module does NOT support
- # reading from /etc/smbpasswd.
- #
- # If you are using /etc/smbpasswd, see the 'passwd'
- # module for an example of how to use /etc/smbpasswd
-
- # if use_mppe is not set to no mschap will
- # add MS-CHAP-MPPE-Keys for MS-CHAPv1 and
- # MS-MPPE-Recv-Key/MS-MPPE-Send-Key for MS-CHAPv2
- #
- #use_mppe = no
-
- # if mppe is enabled require_encryption makes
- # encryption moderate
- #
- #require_encryption = yes
-
- # require_strong always requires 128 bit key
- # encryption
- #
- #require_strong = yes
-
- # Windows sends us a username in the form of
- # DOMAIN\user, but sends the challenge response
- # based on only the user portion. This hack
- # corrects for that incorrect behavior.
- #
- #with_ntdomain_hack = no
-
- # The module can perform authentication itself, OR
- # use a Windows Domain Controller. This configuration
- # directive tells the module to call the ntlm_auth
- # program, which will do the authentication, and return
- # the NT-Key. Note that you MUST have "winbindd" and
- # "nmbd" running on the local machine for ntlm_auth
- # to work. See the ntlm_auth program documentation
- # for details.
- #
- # Be VERY careful when editing the following line!
- #
- #ntlm_auth = "/path/to/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
-# }
-
- # Lightweight Directory Access Protocol (LDAP)
- #
- # This module definition allows you to use LDAP for
- # authorization and authentication.
- #
- # See doc/rlm_ldap for description of configuration options
- # and sample authorize{} and authenticate{} blocks
- #
- # However, LDAP can be used for authentication ONLY when the
- # Access-Request packet contains a clear-text User-Password
- # attribute. LDAP authentication will NOT work for any other
- # authentication method.
- #
- # This means that LDAP servers don't understand EAP. If you
- # force "Auth-Type = LDAP", and then send the server a
- # request containing EAP authentication, then authentication
- # WILL NOT WORK.
- #
- # The solution is to use the default configuration, which does
- # work.
- #
- # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We
- # really can't emphasize this enough.
- #
- ldap {
- server = "#HOSTNAME#"
- # identity = "cn=admin,o=My Org,c=UA"
- # password = mypass
- port = 389
- basedn = "#BASEDN#"
- filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
- # base_filter = "(objectclass=radiusprofile)"
-
- # set this to 'yes' to use TLS encrypted connections
- # to the LDAP database by using the StartTLS extended
- # operation.
- # The StartTLS operation is supposed to be used with normal
- # ldap connections instead of using ldaps (port 689) connections
- start_tls = no
-
- # tls_cacertfile = /path/to/cacert.pem
- # tls_cacertdir = /path/to/ca/dir/
- # tls_certfile = /path/to/radius.crt
- # tls_keyfile = /path/to/radius.key
- # tls_randfile = /path/to/rnd
- # tls_require_cert = "demand"
-
- # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA"
- # profile_attribute = "radiusProfileDn"
-# access_attr = "dialupAccess"
-
- # Mapping of RADIUS dictionary attributes to LDAP
- # directory attributes.
- dictionary_mapping = ${raddbdir}/ldap.attrmap
-
- ldap_connections_number = 5
-
- #
- # NOTICE: The password_header directive is NOT case insensitive
- #
- # password_header = "{clear}"
- #
- # Set:
- # password_attribute = nspmPassword
- #
- # to get the user's password from a Novell eDirectory
- # backend. This will work *only if* freeRADIUS is
- # configured to build with --with-edir option.
- #
- #
- # The server can usually figure this out on its own, and pull
- # the correct User-Password or NT-Password from the database.
- #
- # Note that NT-Passwords MUST be stored as a 32-digit hex
- # string, and MUST start off with "0x", such as:
- #
- # 0x000102030405060708090a0b0c0d0e0f
- #
- # Without the leading "0x", NT-Passwords will not work.
- # This goes for NT-Passwords stored in SQL, too.
- #
- password_attribute = userPassword
- #
- # Un-comment the following to disable Novell eDirectory account
- # policy check and intruder detection. This will work *only if*
- # FreeRADIUS is configured to build with --with-edir option.
- #
- # edir_account_policy_check=no
- #
- # groupname_attribute = cn
- # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
- # groupmembership_attribute = radiusGroupName
- timeout = 4
- timelimit = 3
- net_timeout = 1
- compare_check_items = no
- # do_xlat = yes
- # access_attr_used_for_allow = yes
-
- #
- # By default, if the packet contains a User-Password,
- # and no other module is configured to handle the
- # authentication, the LDAP module sets itself to do
- # LDAP bind for authentication.
- #
- # You can disable this behavior by setting the following
- # configuration entry to "no".
- #
- # allowed values: {no, yes}
- # set_auth_type = yes
- }
-
- # passwd module allows to do authorization via any passwd-like
- # file and to extract any attributes from these modules
- #
- # parameters are:
- # filename - path to filename
- # format - format for filename record. This parameters
- # correlates record in the passwd file and RADIUS
- # attributes.
- #
- # Field marked as '*' is key field. That is, the parameter
- # with this name from the request is used to search for
- # the record from passwd file
- # Attribute marked as '=' is added to reply_itmes instead
- # of default configure_itmes
- # Attribute marked as '~' is added to request_items
- #
- # Field marked as ',' may contain a comma separated list
- # of attributes.
- # authtype - if record found this Auth-Type is used to authenticate
- # user
- # hashsize - hashtable size. If 0 or not specified records are not
- # stored in memory and file is red on every request.
- # allowmultiplekeys - if few records for every key are allowed
- # ignorenislike - ignore NIS-related records
- # delimiter - symbol to use as a field separator in passwd file,
- # for format ':' symbol is always used. '\0', '\n' are
- # not allowed
- #
-
- # An example configuration for using /etc/smbpasswd.
- #
- #passwd etc_smbpasswd {
- # filename = /etc/smbpasswd
- # format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::"
- # authtype = MS-CHAP
- # hashsize = 100
- # ignorenislike = no
- # allowmultiplekeys = no
- #}
-
- # Similar configuration, for the /etc/group file. Adds a Group-Name
- # attribute for every group that the user is member of.
- #
- #passwd etc_group {
- # filename = /etc/group
- # format = "=Group-Name:::*,User-Name"
- # hashsize = 50
- # ignorenislike = yes
- # allowmultiplekeys = yes
- # delimiter = ":"
- #}
-
- # Realm module, for proxying.
- #
- # You can have multiple instances of the realm module to
- # support multiple realm syntaxs at the same time. The
- # search order is defined by the order in the authorize and
- # preacct sections.
- #
- # Four config options:
- # format - must be 'prefix' or 'suffix'
- # delimiter - must be a single character
- # ignore_default - set to 'yes' or 'no'
- # ignore_null - set to 'yes' or 'no'
- #
- # ignore_default and ignore_null can be set to 'yes' to prevent
- # the module from matching against DEFAULT or NULL realms. This
- # may be useful if you have have multiple instances of the
- # realm module.
- #
- # They both default to 'no'.
- #
-
- # 'realm/username'
- #
- # Using this entry, IPASS users have their realm set to "IPASS".
-# realm IPASS {
-# format = prefix
-# delimiter = "/"
-# ignore_default = no
-# ignore_null = no
-# }
-
- # 'username@realm'
- #
- realm suffix {
- format = suffix
- delimiter = "@"
- ignore_default = no
- ignore_null = no
- }
-
- # 'username%realm'
- #
-# realm realmpercent {
-# format = suffix
-# delimiter = "%"
-# ignore_default = no
-# ignore_null = no
-# }
-
- #
- # 'domain\user'
- #
-# realm ntdomain {
-# format = prefix
-# delimiter = "\\"
-# ignore_default = no
-# ignore_null = no
-# }
-
- # A simple value checking module
- #
- # It can be used to check if an attribute value in the request
- # matches a (possibly multi valued) attribute in the check
- # items This can be used for example for caller-id
- # authentication. For the module to run, both the request
- # attribute and the check items attribute must exist
- #
- # i.e.
- # A user has an ldap entry with 2 radiusCallingStationId
- # attributes with values "12345678" and "12345679". If we
- # enable rlm_checkval, then any request which contains a
- # Calling-Station-Id with one of those two values will be
- # accepted. Requests with other values for
- # Calling-Station-Id will be rejected.
- #
- # Regular expressions in the check attribute value are allowed
- # as long as the operator is '=~'
- #
-# checkval {
- # The attribute to look for in the request
-# item-name = Calling-Station-Id
-
- # The attribute to look for in check items. Can be multi valued
-# check-name = Calling-Station-Id
-
- # The data type. Can be
- # string,integer,ipaddr,date,abinary,octets
-# data-type = string
-
- # If set to yes and we dont find the item-name attribute in the
- # request then we send back a reject
- # DEFAULT is no
- #notfound-reject = no
-# }
-
- # rewrite arbitrary packets. Useful in accounting and authorization.
- #
- #
- # The module can also use the Rewrite-Rule attribute. If it
- # is set and matches the name of the module instance, then
- # that module instance will be the only one which runs.
- #
- # Also if new_attribute is set to yes then a new attribute
- # will be created containing the value replacewith and it
- # will be added to searchin (packet, reply, proxy, proxy_reply or config).
- # searchfor,ignore_case and max_matches will be ignored in that case.
- #
- # Backreferences are supported: %{0} will contain the string the whole match
- # and %{1} to %{8} will contain the contents of the 1st to the 8th parentheses
- #
- # If max_matches is greater than one the backreferences will correspond to the
- # first match
-
- #
- #attr_rewrite sanecallerid {
- # attribute = Called-Station-Id
- # may be "packet", "reply", "proxy", "proxy_reply" or "config"
- # searchin = packet
- # searchfor = "[+ ]"
- # replacewith = ""
- # ignore_case = no
- # new_attribute = no
- # max_matches = 10
- # ## If set to yes then the replace string will be appended to the original string
- # append = no
- #}
-
- # Preprocess the incoming RADIUS request, before handing it off
- # to other modules.
- #
- # This module processes the 'huntgroups' and 'hints' files.
- # In addition, it re-writes some weird attributes created
- # by some NASes, and converts the attributes into a form which
- # is a little more standard.
- #
- preprocess {
-# huntgroups = ${confdir}/huntgroups
- hints = ${confdir}/hints
-
- # This hack changes Ascend's wierd port numberings
- # to standard 0-??? port numbers so that the "+" works
- # for IP address assignments.
-# with_ascend_hack = no
-# ascend_channels_per_line = 23
-
- # Windows NT machines often authenticate themselves as
- # NT_DOMAIN\username
- #
- # If this is set to 'yes', then the NT_DOMAIN portion
- # of the user-name is silently discarded.
- #
- # This configuration entry SHOULD NOT be used.
- # See the "realms" module for a better way to handle
- # NT domains.
-# with_ntdomain_hack = no
-
- # Specialix Jetstream 8500 24 port access server.
- #
- # If the user name is 10 characters or longer, a "/"
- # and the excess characters after the 10th are
- # appended to the user name.
- #
- # If you're not running that NAS, you don't need
- # this hack.
-# with_specialix_jetstream_hack = no
-
- # Cisco (and Quintum in Cisco mode) sends it's VSA attributes
- # with the attribute name *again* in the string, like:
- #
- # H323-Attribute = "h323-attribute=value".
- #
- # If this configuration item is set to 'yes', then
- # the redundant data in the the attribute text is stripped
- # out. The result is:
- #
- # H323-Attribute = "value"
- #
- # If you're not running a Cisco or Quintum NAS, you don't
- # need this hack.
-# with_cisco_vsa_hack = no
- }
-
- # Livingston-style 'users' file
- #
-# files {
-# usersfile = ${confdir}/users
-# acctusersfile = ${confdir}/acct_users
-# preproxy_usersfile = ${confdir}/preproxy_users
-
- # If you want to use the old Cistron 'users' file
- # with FreeRADIUS, you should change the next line
- # to 'compat = cistron'. You can the copy your 'users'
- # file from Cistron.
-# compat = no
-# }
-
- # Write a detailed log of all accounting records received.
- #
- detail {
- # Note that we do NOT use NAS-IP-Address here, as
- # that attribute MAY BE from the originating NAS, and
- # NOT from the proxy which actually sent us the
- # request. The Client-IP-Address attribute is ALWAYS
- # the address of the client which sent us the
- # request.
- #
- # The following line creates a new detail file for
- # every radius client (by IP address or hostname).
- # In addition, a new detail file is created every
- # day, so that the detail file doesn't have to go
- # through a 'log rotation'
- #
- # If your detail files are large, you may also want
- # to add a ':%H' (see doc/variables.txt) to the end
- # of it, to create a new detail file every hour, e.g.:
- #
- # ..../detail-%Y%m%d:%H
- #
- # This will create a new detail file for every hour.
- #
- detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
-
- #
- # The Unix-style permissions on the 'detail' file.
- #
- # The detail file often contains secret or private
- # information about users. So by keeping the file
- # permissions restrictive, we can prevent unwanted
- # people from seeing that information.
- detailperm = 0600
-
- #
- # Certain attributes such as User-Password may be
- # "sensitive", so they should not be printed in the
- # detail file. This section lists the attributes
- # that should be suppressed.
- #
- # The attributes should be listed one to a line.
- #
- suppress {
- User-Password
- }
- }
-
- #
- # Many people want to log authentication requests.
- # Rather than modifying the server core to print out more
- # messages, we can use a different instance of the 'detail'
- # module, to log the authentication requests to a file.
- #
- # You will also need to un-comment the 'auth_log' line
- # in the 'authorize' section, below.
- #
- # detail auth_log {
- # detailfile = ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d
-
- #
- # This MUST be 0600, otherwise anyone can read
- # the users passwords!
- # detailperm = 0600
- # }
-
- #
- # This module logs authentication reply packets sent
- # to a NAS. Both Access-Accept and Access-Reject packets
- # are logged.
- #
- # You will also need to un-comment the 'reply_log' line
- # in the 'post-auth' section, below.
- #
- detail reply_log {
- detailfile = ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d
-
- #
- # This MUST be 0600, otherwise anyone can read
- # the users passwords!
- detailperm = 0600
- }
-
- #
- # This module logs packets proxied to a home server.
- #
- # You will also need to un-comment the 'pre_proxy_log' line
- # in the 'pre-proxy' section, below.
- #
- detail pre_proxy_log {
- detailfile = ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d
-
- #
- # This MUST be 0600, otherwise anyone can read
- # the users passwords!
- detailperm = 0600
- }
-
- #
- # This module logs response packets from a home server.
- #
- # You will also need to un-comment the 'post_proxy_log' line
- # in the 'post-proxy' section, below.
- #
- detail post_proxy_log {
- detailfile = ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d
-
- #
- # This MUST be 0600, otherwise anyone can read
- # the users passwords!
- detailperm = 0600
- }
-
- #
- # The rlm_sql_log module appends the SQL queries in a log
- # file which is read later by the radsqlrelay program.
- #
- # This module only performs the dynamic expansion of the
- # variables found in the SQL statements. No operation is
- # executed on the database server. (this could be done
- # later by an external program) That means the module is
- # useful only with non-"SELECT" statements.
- #
- # See rlm_sql_log(5) manpage.
- #
-# sql_log {
-# path = ${radacctdir}/sql-relay
-# acct_table = "radacct"
-# postauth_table = "radpostauth"
-#
-# Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '%S', '0', '0', '');"
-# Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \
-# '%{Acct-Terminate-Cause}');"
-# Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \
-# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \
-# AcctSessionTime, AcctTerminateCause) VALUES \
-# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \
-# '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');"
-#
-# Post-Auth = "INSERT INTO ${postauth_table} \
-# (user, pass, reply, date) VALUES \
-# ('%{User-Name}', '%{User-Password:-Chap-Password}', \
-# '%{reply:Packet-Type}', '%S');"
-# }
-
- #
- # Create a unique accounting session Id. Many NASes re-use
- # or repeat values for Acct-Session-Id, causing no end of
- # confusion.
- #
- # This module will add a (probably) unique session id
- # to an accounting packet based on the attributes listed
- # below found in the packet. See doc/rlm_acct_unique for
- # more information.
- #
-# acct_unique {
-# key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
-# }
-
-
- # Include another file that has the SQL-related configuration.
- # This is another file only because it tends to be big.
- #
- # The following configuration file is for use with MySQL.
- #
- # For Postgresql, use: ${confdir}/postgresql.conf
- # For MS-SQL, use: ${confdir}/mssql.conf
- # For Oracle, use: ${confdir}/oraclesql.conf
- #
-# $INCLUDE ${confdir}/sql.conf
-
-
- # For Cisco VoIP specific accounting with Postgresql,
- # use: ${confdir}/pgsql-voip.conf
- #
- # You will also need the sql schema from:
- # src/billing/cisco_h323_db_schema-postgres.sql
- # Note: This config can be use AS WELL AS the standard sql
- # config if you need SQL based Auth
-
-
- # Write a 'utmp' style file, of which users are currently
- # logged in, and where they've logged in from.
- #
- # This file is used mainly for Simultaneous-Use checking,
- # and also 'radwho', to see who's currently logged in.
- #
-# radutmp {
- # Where the file is stored. It's not a log file,
- # so it doesn't need rotating.
- #
-# filename = ${logdir}/radutmp
-
- # The field in the packet to key on for the
- # 'user' name, If you have other fields which you want
- # to use to key on to control Simultaneous-Use,
- # then you can use them here.
- #
- # Note, however, that the size of the field in the
- # 'utmp' data structure is small, around 32
- # characters, so that will limit the possible choices
- # of keys.
- #
- # You may want instead: %{Stripped-User-Name:-%{User-Name}}
-# username = %{User-Name}
-
-
- # Whether or not we want to treat "user" the same
- # as "USER", or "User". Some systems have problems
- # with case sensitivity, so this should be set to
- # 'no' to enable the comparisons of the key attribute
- # to be case insensitive.
- #
-# case_sensitive = yes
-
- # Accounting information may be lost, so the user MAY
- # have logged off of the NAS, but we haven't noticed.
- # If so, we can verify this information with the NAS,
- #
- # If we want to believe the 'utmp' file, then this
- # configuration entry can be set to 'no'.
- #
-# check_with_nas = yes
-
- # Set the file permissions, as the contents of this file
- # are usually private.
-# perm = 0600
-
-# callerid = "yes"
-# }
-
- # "Safe" radutmp - does not contain caller ID, so it can be
- # world-readable, and radwho can work for normal users, without
- # exposing any information that isn't already exposed by who(1).
- #
- # This is another 'instance' of the radutmp module, but it is given
- # then name "sradutmp" to identify it later in the "accounting"
- # section.
-# radutmp sradutmp {
-# filename = ${logdir}/sradutmp
-# perm = 0644
-# callerid = "no"
-# }
-
- # attr_filter - filters the attributes received in replies from
- # proxied servers, to make sure we send back to our RADIUS client
- # only allowed attributes.
-# attr_filter {
-# attrsfile = ${confdir}/attrs
-# }
-
- # counter module:
- # This module takes an attribute (count-attribute).
- # It also takes a key, and creates a counter for each unique
- # key. The count is incremented when accounting packets are
- # received by the server. The value of the increment depends
- # on the attribute type.
- # If the attribute is Acct-Session-Time or of an integer type we add the
- # value of the attribute. If it is anything else we increase the
- # counter by one.
- #
- # The 'reset' parameter defines when the counters are all reset to
- # zero. It can be hourly, daily, weekly, monthly or never.
- #
- # hourly: Reset on 00:00 of every hour
- # daily: Reset on 00:00:00 every day
- # weekly: Reset on 00:00:00 on sunday
- # monthly: Reset on 00:00:00 of the first day of each month
- #
- # It can also be user defined. It should be of the form:
- # num[hdwm] where:
- # h: hours, d: days, w: weeks, m: months
- # If the letter is ommited days will be assumed. In example:
- # reset = 10h (reset every 10 hours)
- # reset = 12 (reset every 12 days)
- #
- #
- # The check-name attribute defines an attribute which will be
- # registered by the counter module and can be used to set the
- # maximum allowed value for the counter after which the user
- # is rejected.
- # Something like:
- #
- # DEFAULT Max-Daily-Session := 36000
- # Fall-Through = 1
- #
- # You should add the counter module in the instantiate
- # section so that it registers check-name before the files
- # module reads the users file.
- #
- # If check-name is set and the user is to be rejected then we
- # send back a Reply-Message and we log a Failure-Message in
- # the radius.log
- # If the count attribute is Acct-Session-Time then on each login
- # we send back the remaining online time as a Session-Timeout attribute
- #
- # The counter-name can also be used instead of using the check-name
- # like below:
- #
- # DEFAULT Daily-Session-Time > 3600, Auth-Type = Reject
- # Reply-Message = "You've used up more than one hour today"
- #
- # The allowed-servicetype attribute can be used to only take
- # into account specific sessions. For example if a user first
- # logs in through a login menu and then selects ppp there will
- # be two sessions. One for Login-User and one for Framed-User
- # service type. We only need to take into account the second one.
- #
- # The module should be added in the instantiate, authorize and
- # accounting sections. Make sure that in the authorize
- # section it comes after any module which sets the
- # 'check-name' attribute.
- #
-# counter daily {
-# filename = ${raddbdir}/db.daily
-# key = User-Name
-# count-attribute = Acct-Session-Time
-# reset = daily
-# counter-name = Daily-Session-Time
-# check-name = Max-Daily-Session
-# allowed-servicetype = Framed-User
-# cache-size = 5000
-# }
-
- #
- # This module is an SQL enabled version of the counter module.
- #
- # Rather than maintaining seperate (GDBM) databases of
- # accounting info for each counter, this module uses the data
- # stored in the raddacct table by the sql modules. This
- # module NEVER does any database INSERTs or UPDATEs. It is
- # totally dependent on the SQL module to process Accounting
- # packets.
- #
- # The 'sqlmod_inst' parameter holds the instance of the sql
- # module to use when querying the SQL database. Normally it
- # is just "sql". If you define more and one SQL module
- # instance (usually for failover situations), you can
- # specify which module has access to the Accounting Data
- # (radacct table).
- #
- # The 'reset' parameter defines when the counters are all
- # reset to zero. It can be hourly, daily, weekly, monthly or
- # never. It can also be user defined. It should be of the
- # form:
- # num[hdwm] where:
- # h: hours, d: days, w: weeks, m: months
- # If the letter is ommited days will be assumed. In example:
- # reset = 10h (reset every 10 hours)
- # reset = 12 (reset every 12 days)
- #
- # The 'key' parameter specifies the unique identifier for the
- # counter records (usually 'User-Name').
- #
- # The 'query' parameter specifies the SQL query used to get
- # the current Counter value from the database. There are 3
- # parameters that can be used in the query:
- # %k 'key' parameter
- # %b unix time value of beginning of reset period
- # %e unix time value of end of reset period
- #
- # The 'check-name' parameter is the name of the 'check'
- # attribute to use to access the counter in the 'users' file
- # or SQL radcheck or radcheckgroup tables.
- #
- # DEFAULT Max-Daily-Session > 3600, Auth-Type = Reject
- # Reply-Message = "You've used up more than one hour today"
- #
-# sqlcounter dailycounter {
-# counter-name = Daily-Session-Time
-# check-name = Max-Daily-Session
-# sqlmod-inst = sql
-# key = User-Name
-# reset = daily
-
- # This query properly handles calls that span from the
- # previous reset period into the current period but
- # involves more work for the SQL server than those
- # below
-# query = "SELECT SUM(AcctSessionTime - \
-# GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
-# FROM radacct WHERE UserName='%{%k}' AND \
-# UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
-
- # This query ignores calls that started in a previous
- # reset period and continue into into this one. But it
- # is a little easier on the SQL server
-# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
-# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')"
-
- # This query is the same as above, but demonstrates an
- # additional counter parameter '%e' which is the
- # timestamp for the end of the period
-# query = "SELECT SUM(AcctSessionTime) FROM radacct \
-# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \
-# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')"
-# }
-
-# sqlcounter monthlycounter {
-# counter-name = Monthly-Session-Time
-# check-name = Max-Monthly-Session
-# sqlmod-inst = sql
-# key = User-Name
-# reset = monthly
-
- # This query properly handles calls that span from the
- # previous reset period into the current period but
- # involves more work for the SQL server than those
- # below
-# query = "SELECT SUM(AcctSessionTime - \
-# GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
-# FROM radacct WHERE UserName='%{%k}' AND \
-# UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
-
- # This query ignores calls that started in a previous
- # reset period and continue into into this one. But it
- # is a little easier on the SQL server
-# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \
-# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')"
-
- # This query is the same as above, but demonstrates an
- # additional counter parameter '%e' which is the
- # timestamp for the end of the period
-# query = "SELECT SUM(AcctSessionTime) FROM radacct \
-# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \
-# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')"
-# }
-
- #
- # The "always" module is here for debugging purposes. Each
- # instance simply returns the same result, always, without
- # doing anything.
- always fail {
- rcode = fail
- }
- always reject {
- rcode = reject
- }
- always ok {
- rcode = ok
- simulcount = 0
- mpp = no
- }
-
- #
- # The 'expression' module currently has no configuration.
- #
- # This module is useful only for 'xlat'. To use it,
- # put 'exec' into the 'instantiate' section. You can then
- # do dynamic translation of attributes like:
- #
- # Attribute-Name = `%{expr:2 + 3 + %{exec: uid -u}}`
- #
- # The value of the attribute will be replaced with the output
- # of the program which is executed. Due to RADIUS protocol
- # limitations, any output over 253 bytes will be ignored.
-# expr {
-# }
-
- #
- # The 'digest' module currently has no configuration.
- #
- # "Digest" authentication against a Cisco SIP server.
- # See 'doc/rfc/draft-sterman-aaa-sip-00.txt' for details
- # on performing digest authentication for Cisco SIP servers.
- #
-# digest {
-# }
-
- #
- # Execute external programs
- #
- # This module is useful only for 'xlat'. To use it,
- # put 'exec' into the 'instantiate' section. You can then
- # do dynamic translation of attributes like:
- #
- # Attribute-Name = `%{exec:/path/to/program args}`
- #
- # The value of the attribute will be replaced with the output
- # of the program which is executed. Due to RADIUS protocol
- # limitations, any output over 253 bytes will be ignored.
- #
- # The RADIUS attributes from the user request will be placed
- # into environment variables of the executed program, as
- # described in 'doc/variables.txt'
- #
-# exec {
-# wait = yes
-# input_pairs = request
-# }
-
- #
- # This is a more general example of the execute module.
- #
- # This one is called "echo".
- #
- # Attribute-Name = `%{echo:/path/to/program args}`
- #
- # If you wish to execute an external program in more than
- # one section (e.g. 'authorize', 'pre_proxy', etc), then it
- # is probably best to define a different instance of the
- # 'exec' module for every section.
- #
-# exec echo {
- #
- # Wait for the program to finish.
- #
- # If we do NOT wait, then the program is "fire and
- # forget", and any output attributes from it are ignored.
- #
- # If we are looking for the program to output
- # attributes, and want to add those attributes to the
- # request, then we MUST wait for the program to
- # finish, and therefore set 'wait=yes'
- #
- # allowed values: {no, yes}
-# wait = yes
-
- #
- # The name of the program to execute, and it's
- # arguments. Dynamic translation is done on this
- # field, so things like the following example will
- # work.
- #
-# program = "/bin/echo %{User-Name}"
-
- #
- # The attributes which are placed into the
- # environment variables for the program.
- #
- # Allowed values are:
- #
- # request attributes from the request
- # config attributes from the configuration items list
- # reply attributes from the reply
- # proxy-request attributes from the proxy request
- # proxy-reply attributes from the proxy reply
- #
- # Note that some attributes may not exist at some
- # stages. e.g. There may be no proxy-reply
- # attributes if this module is used in the
- # 'authorize' section.
- #
-# input_pairs = request
-
- #
- # Where to place the output attributes (if any) from
- # the executed program. The values allowed, and the
- # restrictions as to availability, are the same as
- # for the input_pairs.
- #
-# output_pairs = reply
-
- #
- # When to execute the program. If the packet
- # type does NOT match what's listed here, then
- # the module does NOT execute the program.
- #
- # For a list of allowed packet types, see
- # the 'dictionary' file, and look for VALUEs
- # of the Packet-Type attribute.
- #
- # By default, the module executes on ANY packet.
- # Un-comment out the following line to tell the
- # module to execute only if an Access-Accept is
- # being sent to the NAS.
- #
- #packet_type = Access-Accept
-# }
-
- # Do server side ip pool management. Should be added in post-auth and
- # accounting sections.
- #
- # The module also requires the existance of the Pool-Name
- # attribute. That way the administrator can add the Pool-Name
- # attribute in the user profiles and use different pools
- # for different users. The Pool-Name attribute is a *check* item not
- # a reply item.
- #
- # Example:
- # radiusd.conf: ippool students { [...] }
- # users file : DEFAULT Group == students, Pool-Name := "students"
- #
- # ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST *********
- # ********* THEN ERASE THE DB FILES *********
- #
-# ippool main_pool {
-
- # range-start,range-stop: The start and end ip
- # addresses for the ip pool
-# range-start = 192.168.1.1
-# range-stop = 192.168.3.254
-
- # netmask: The network mask used for the ip's
-# netmask = 255.255.255.0
-
- # cache-size: The gdbm cache size for the db
- # files. Should be equal to the number of ip's
- # available in the ip pool
-# cache-size = 800
-
- # session-db: The main db file used to allocate ip's to clients
-# session-db = ${raddbdir}/db.ippool
-
- # ip-index: Helper db index file used in multilink
-# ip-index = ${raddbdir}/db.ipindex
-
- # override: Will this ippool override a Framed-IP-Address already set
-# override = no
-
- # maximum-timeout: If not zero specifies the maximum time in seconds an
- # entry may be active. Default: 0
-# maximum-timeout = 0
-# }
-
- # $INCLUDE ${confdir}/sqlippool.conf
-
- # OTP token support. Not included by default.
- # $INCLUDE ${confdir}/otp.conf
-
-}
-
-# Instantiation
-#
-# This section orders the loading of the modules. Modules
-# listed here will get loaded BEFORE the later sections like
-# authorize, authenticate, etc. get examined.
-#
-# This section is not strictly needed. When a section like
-# authorize refers to a module, it's automatically loaded and
-# initialized. However, some modules may not be listed in any
-# of the following sections, so they can be listed here.
-#
-# Also, listing modules here ensures that you have control over
-# the order in which they are initalized. If one module needs
-# something defined by another module, you can list them in order
-# here, and ensure that the configuration will be OK.
-#
-instantiate {
- #
- # Allows the execution of external scripts.
- # The entire command line (and output) must fit into 253 bytes.
- #
- # e.g. Framed-Pool = `%{exec:/bin/echo foo}`
-# exec
-
- #
- # The expression module doesn't do authorization,
- # authentication, or accounting. It only does dynamic
- # translation, of the form:
- #
- # Session-Timeout = `%{expr:2 + 3}`
- #
- # So the module needs to be instantiated, but CANNOT be
- # listed in any other section. See 'doc/rlm_expr' for
- # more information.
- #
-# expr
-
- #
- # We add the counter module here so that it registers
- # the check-name attribute before any module which sets
- # it
-# daily
-}
-
-# Authorization. First preprocess (hints and huntgroups files),
-# then realms, and finally look in the "users" file.
-#
-# The order of the realm modules will determine the order that
-# we try to find a matching realm.
-#
-# Make *sure* that 'preprocess' comes before any realm if you
-# need to setup hints for the remote radius server
-authorize {
- #
- # The preprocess module takes care of sanitizing some bizarre
- # attributes in the request, and turning them into attributes
- # which are more standard.
- #
- # It takes care of processing the 'raddb/hints' and the
- # 'raddb/huntgroups' files.
- #
- # It also adds the %{Client-IP-Address} attribute to the request.
- preprocess
-
- #
- # If you want to have a log of authentication requests,
- # un-comment the following line, and the 'detail auth_log'
- # section, above.
-# auth_log
-
-# attr_filter
-
- #
- # The chap module will set 'Auth-Type := CHAP' if we are
- # handling a CHAP request and Auth-Type has not already been set
-# chap
-
- #
- # If the users are logging in with an MS-CHAP-Challenge
- # attribute for authentication, the mschap module will find
- # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
- # to the request, which will cause the server to then use
- # the mschap module for authentication.
-# mschap
-
- #
- # If you have a Cisco SIP server authenticating against
- # FreeRADIUS, uncomment the following line, and the 'digest'
- # line in the 'authenticate' section.
-# digest
-
- #
- # Look for IPASS style 'realm/', and if not found, look for
- # '@realm', and decide whether or not to proxy, based on
- # that.
-# IPASS
-
- #
- # If you are using multiple kinds of realms, you probably
- # want to set "ignore_null = yes" for all of them.
- # Otherwise, when the first style of realm doesn't match,
- # the other styles won't be checked.
- #
- suffix
-# ntdomain
-
- #
- # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP
- # authentication.
- #
- # It also sets the EAP-Type attribute in the request
- # attribute list to the EAP type from the packet.
- eap
-
- #
- # Read the 'users' file
-# files
-
- #
- # Look in an SQL database. The schema of the database
- # is meant to mirror the "users" file.
- #
- # See "Authorization Queries" in sql.conf
-# sql
-
- #
- # If you are using /etc/smbpasswd, and are also doing
- # mschap authentication, the un-comment this line, and
- # configure the 'etc_smbpasswd' module, above.
-# etc_smbpasswd
-
- #
- # The ldap module will set Auth-Type to LDAP if it has not
- # already been set
- ldap
-
- #
- # Enforce daily limits on time spent logged in.
-# daily
-
- #
- # Use the checkval module
-# checkval
-
- # The ldap module will set Auth-Type to LDAP if it has not already
- # been set
- ldap
-}
-
-
-# Authentication.
-#
-#
-# This section lists which modules are available for authentication.
-# Note that it does NOT mean 'try each module in order'. It means
-# that a module from the 'authorize' section adds a configuration
-# attribute 'Auth-Type := FOO'. That authentication type is then
-# used to pick the apropriate module from the list below.
-#
-
-# In general, you SHOULD NOT set the Auth-Type attribute. The server
-# will figure it out on its own, and will do the right thing. The
-# most common side effect of erroneously setting the Auth-Type
-# attribute is that one authentication method will work, but the
-# others will not.
-#
-# The common reasons to set the Auth-Type attribute by hand
-# is to either forcibly reject the user, or forcibly accept him.
-#
-authenticate {
- #
- # PAP authentication, when a back-end database listed
- # in the 'authorize' section supplies a password. The
- # password can be clear-text, or encrypted.
-# Auth-Type PAP {
-# pap
-# }
-
- #
- # Most people want CHAP authentication
- # A back-end database listed in the 'authorize' section
- # MUST supply a CLEAR TEXT password. Encrypted passwords
- # won't work.
-# Auth-Type CHAP {
-# chap
-# }
-
- #
- # MSCHAP authentication.
-# Auth-Type MS-CHAP {
-# mschap
-# }
-
- #
- # If you have a Cisco SIP server authenticating against
- # FreeRADIUS, uncomment the following line, and the 'digest'
- # line in the 'authorize' section.
-# digest
-
- #
- # Pluggable Authentication Modules.
-# pam
-
- #
- # See 'man getpwent' for information on how the 'unix'
- # module checks the users password. Note that packets
- # containing CHAP-Password attributes CANNOT be authenticated
- # against /etc/passwd! See the FAQ for details.
- #
-# unix
-
- # Uncomment it if you want to use ldap for authentication
- #
- # Note that this means "check plain-text password against
- # the ldap database", which means that EAP won't work,
- # as it does not supply a plain-text password.
- Auth-Type LDAP {
- ldap
- }
-
- #
- # Allow EAP authentication.
- eap
-}
-
-
-#
-# Pre-accounting. Decide which accounting type to use.
-#
-preacct {
-# preprocess
-
- #
- # Ensure that we have a semi-unique identifier for every
- # request, and many NAS boxes are broken.
-# acct_unique
-
- #
- # Look for IPASS-style 'realm/', and if not found, look for
- # '@realm', and decide whether or not to proxy, based on
- # that.
- #
- # Accounting requests are generally proxied to the same
- # home server as authentication requests.
-# IPASS
-# suffix
-# ntdomain
-
- #
- # Read the 'acct_users' file
-# files
-}
-
-#
-# Accounting. Log the accounting data.
-#
-accounting {
- #
- # Create a 'detail'ed log of the packets.
- # Note that accounting requests which are proxied
- # are also logged in the detail file.
- detail
-# daily
-
- # Update the wtmp file
- #
- # If you don't use "radlast", you can delete this line.
-# unix
-
- #
- # For Simultaneous-Use tracking.
- #
- # Due to packet losses in the network, the data here
- # may be incorrect. There is little we can do about it.
-# radutmp
-# sradutmp
-
- # Return an address to the IP Pool when we see a stop record.
-# main_pool
-
- #
- # Log traffic to an SQL database.
- #
- # See "Accounting queries" in sql.conf
-# sql
-
- #
- # Instead of sending the query to the SQL server,
- # write it into a log file.
- #
-# sql_log
-
- # Cisco VoIP specific bulk accounting
-# pgsql-voip
-
-}
-
-
-# Session database, used for checking Simultaneous-Use. Either the radutmp
-# or rlm_sql module can handle this.
-# The rlm_sql module is *much* faster
-session {
-# radutmp
-
- #
- # See "Simultaneous Use Checking Querie" in sql.conf
-# sql
-}
-
-
-# Post-Authentication
-# Once we KNOW that the user has been authenticated, there are
-# additional steps we can take.
-post-auth {
- # Get an address from the IP Pool.
-# main_pool
-
- #
- # If you want to have a log of authentication replies,
- # un-comment the following line, and the 'detail reply_log'
- # section, above.
- reply_log
-
- #
- # After authenticating the user, do another SQL query.
- #
- # See "Authentication Logging Queries" in sql.conf
-# sql
-
- #
- # Instead of sending the query to the SQL server,
- # write it into a log file.
- #
-# sql_log
-
- #
- # Un-comment the following if you have set
- # 'edir_account_policy_check = yes' in the ldap module sub-section of
- # the 'modules' section.
- #
-# ldap
- #
- # Access-Reject packets are sent through the REJECT sub-section of the
- # post-auth section.
- # Uncomment the following and set the module name to the ldap instance
- # name if you have set 'edir_account_policy_check = yes' in the ldap
- # module sub-section of the 'modules' section.
- #
-# Post-Auth-Type REJECT {
-# insert-module-name-here
-# }
-
-}
-
-#
-# When the server decides to proxy a request to a home server,
-# the proxied request is first passed through the pre-proxy
-# stage. This stage can re-write the request, or decide to
-# cancel the proxy.
-#
-# Only a few modules currently have this method.
-#
-pre-proxy {
-# attr_rewrite
-
- # Uncomment the following line if you want to change attributes
- # as defined in the preproxy_users file.
-# files
-
- # If you want to have a log of packets proxied to a home
- # server, un-comment the following line, and the
- # 'detail pre_proxy_log' section, above.
- pre_proxy_log
-}
-
-#
-# When the server receives a reply to a request it proxied
-# to a home server, the request may be massaged here, in the
-# post-proxy stage.
-#
-post-proxy {
-
- # If you want to have a log of replies from a home server,
- # un-comment the following line, and the 'detail post_proxy_log'
- # section, above.
- post_proxy_log
-
-# attr_rewrite
-
- # Uncomment the following line if you want to filter replies from
- # remote proxies based on the rules defined in the 'attrs' file.
-
-# attr_filter
-
- #
- # If you are proxying LEAP, you MUST configure the EAP
- # module, and you MUST list it here, in the post-proxy
- # stage.
- #
- # You MUST also use the 'nostrip' option in the 'realm'
- # configuration. Otherwise, the User-Name attribute
- # in the proxied request will not match the user name
- # hidden inside of the EAP packet, and the end server will
- # reject the EAP request.
- #
- eap
-}
projects / carnet-upgrade.git / blobdiff