From: Valentin Vidic Date: Wed, 26 Aug 2009 12:16:04 +0000 (+0200) Subject: Purge and reinstall freeradius as reqired by AAI package. X-Git-Tag: debian/5.0.3~3 X-Git-Url: http://ftp.carnet.hr/carnet-debian/scm?p=carnet-upgrade.git;a=commitdiff_plain;h=4c2c39354418f98a029d6142525042e73a506484 Purge and reinstall freeradius as reqired by AAI package. --- diff --git a/files/etc/freeradius/clients.conf.expect b/files/etc/freeradius/clients.conf.expect deleted file mode 100644 index 18a05a3..0000000 --- a/files/etc/freeradius/clients.conf.expect +++ /dev/null @@ -1,42 +0,0 @@ -# -# clients.conf - client configuration directives -# -# This file is included by default. To disable it, you will need -# to modify the CLIENTS CONFIGURATION section of "radiusd.conf". -# -####################################################################### - -client 161.53.2.202 { - secret = S3u2om1 - shortname = aaiss1 -} - -client 161.53.2.203 { - secret = S3u2om2 - shortname = aaiss2 -} - -client 161.53.2.215 { - secret = A41edu1 - shortname = aaics1 -} - -client 161.53.2.216 { - secret = A41edu2 - shortname = aaics2 -} - -client 161.53.2.217 { - secret = A41edu3 - shortname = aaics3 -} - -client 161.53.2.218 { - secret = A41edu4 - shortname = aaics4 -} - -client 127.0.0.1 { - secret = local - shortname = localhost -} diff --git a/files/etc/freeradius/clients.conf.restore b/files/etc/freeradius/clients.conf.restore deleted file mode 100644 index e752e27..0000000 --- a/files/etc/freeradius/clients.conf.restore +++ /dev/null @@ -1,111 +0,0 @@ -# -# clients.conf - client configuration directives -# -####################################################################### - -####################################################################### -# -# Definition of a RADIUS client (usually a NAS). -# -# The information given here over rides anything given in the -# 'clients' file, or in the 'naslist' file. The configuration here -# contains all of the information from those two files, and allows -# for more configuration items. -# -# The "shortname" is be used for logging. The "nastype", "login" and -# "password" fields are mainly used for checkrad and are optional. -# - -# -# Defines a RADIUS client. The format is 'client [hostname|ip-address]' -# -# '127.0.0.1' is another name for 'localhost'. It is enabled by default, -# to allow testing of the server after an initial installation. If you -# are not going to be permitting RADIUS queries from localhost, we suggest -# that you delete, or comment out, this entry. -# -client 127.0.0.1 { - # - # The shared secret use to "encrypt" and "sign" packets between - # the NAS and FreeRADIUS. You MUST change this secret from the - # default, otherwise it's not a secret any more! - # - # The secret can be any string, up to 31 characters in length. - # - secret = testing123 - - # - # The short name is used as an alias for the fully qualified - # domain name, or the IP address. - # - shortname = localhost - - # - # the following three fields are optional, but may be used by - # checkrad.pl for simultaneous use checks - # - - # - # The nastype tells 'checkrad.pl' which NAS-specific method to - # use to query the NAS for simultaneous use. - # - # Permitted NAS types are: - # - # cisco - # computone - # livingston - # max40xx - # multitech - # netserver - # pathras - # patton - # portslave - # tc - # usrhiper - # other # for all other types - - # - nastype = other # localhost isn't usually a NAS... - - # - # The following two configurations are for future use. - # The 'naspasswd' file is currently used to store the NAS - # login name and password, which is used by checkrad.pl - # when querying the NAS for simultaneous use. - # -# login = !root -# password = someadminpas -} - -#client some.host.org { -# secret = testing123 -# shortname = localhost -#} - -# -# You can now specify one secret for a network of clients. -# When a client request comes in, the BEST match is chosen. -# i.e. The entry from the smallest possible network. -# -#client 192.168.0.0/24 { -# secret = testing123-1 -# shortname = private-network-1 -#} -# -#client 192.168.0.0/16 { -# secret = testing123-2 -# shortname = private-network-2 -#} - - -#client 10.10.10.10 { -# # secret and password are mapped through the "secrets" file. -# secret = testing123 -# shortname = liv1 -# # the following three fields are optional, but may be used by -# # checkrad.pl for simultaneous usage checks -# nastype = livingston -# login = !root -# password = someadminpas -#} - diff --git a/files/etc/freeradius/eap.conf.restore b/files/etc/freeradius/eap.conf.restore deleted file mode 100644 index 50cf5d5..0000000 --- a/files/etc/freeradius/eap.conf.restore +++ /dev/null @@ -1,342 +0,0 @@ -# -*- text -*- -# -# Whatever you do, do NOT set 'Auth-Type := EAP'. The server -# is smart enough to figure this out on its own. The most -# common side effect of setting 'Auth-Type := EAP' is that the -# users then cannot use ANY other authentication method. -# -# $Id: eap.conf,v 1.4.4.5 2007/04/20 11:58:45 aland Exp $ -# - eap { - # Invoke the default supported EAP type when - # EAP-Identity response is received. - # - # The incoming EAP messages DO NOT specify which EAP - # type they will be using, so it MUST be set here. - # - # For now, only one default EAP type may be used at a time. - # - # If the EAP-Type attribute is set by another module, - # then that EAP type takes precedence over the - # default type configured here. - # - default_eap_type = md5 - - # A list is maintained to correlate EAP-Response - # packets with EAP-Request packets. After a - # configurable length of time, entries in the list - # expire, and are deleted. - # - timer_expire = 60 - - # There are many EAP types, but the server has support - # for only a limited subset. If the server receives - # a request for an EAP type it does not support, then - # it normally rejects the request. By setting this - # configuration to "yes", you can tell the server to - # instead keep processing the request. Another module - # MUST then be configured to proxy the request to - # another RADIUS server which supports that EAP type. - # - # If another module is NOT configured to handle the - # request, then the request will still end up being - # rejected. - ignore_unknown_eap_types = no - - # Cisco AP1230B firmware 12.2(13)JA1 has a bug. When given - # a User-Name attribute in an Access-Accept, it copies one - # more byte than it should. - # - # We can work around it by configurably adding an extra - # zero byte. - cisco_accounting_username_bug = no - - # Supported EAP-types - - # - # We do NOT recommend using EAP-MD5 authentication - # for wireless connections. It is insecure, and does - # not provide for dynamic WEP keys. - # - md5 { - } - - # Cisco LEAP - # - # We do not recommend using LEAP in new deployments. See: - # http://www.securiteam.com/tools/5TP012ACKE.html - # - # Cisco LEAP uses the MS-CHAP algorithm (but not - # the MS-CHAP attributes) to perform it's authentication. - # - # As a result, LEAP *requires* access to the plain-text - # User-Password, or the NT-Password attributes. - # 'System' authentication is impossible with LEAP. - # - leap { - } - - # Generic Token Card. - # - # Currently, this is only permitted inside of EAP-TTLS, - # or EAP-PEAP. The module "challenges" the user with - # text, and the response from the user is taken to be - # the User-Password. - # - # Proxying the tunneled EAP-GTC session is a bad idea, - # the users password will go over the wire in plain-text, - # for anyone to see. - # - gtc { - # The default challenge, which many clients - # ignore.. - #challenge = "Password: " - - # The plain-text response which comes back - # is put into a User-Password attribute, - # and passed to another module for - # authentication. This allows the EAP-GTC - # response to be checked against plain-text, - # or crypt'd passwords. - # - # If you say "Local" instead of "PAP", then - # the module will look for a User-Password - # configured for the request, and do the - # authentication itself. - # - auth_type = PAP - } - - ## EAP-TLS - # - # To generate ctest certificates, run the script - # - # ../scripts/certs.sh - # - # The documents on http://www.freeradius.org/doc - # are old, but may be helpful. - # - # See also: - # - # http://www.dslreports.com/forum/remark,9286052~mode=flat - # - #tls { - # private_key_password = whatever - # private_key_file = ${raddbdir}/certs/cert-srv.pem - - # If Private key & Certificate are located in - # the same file, then private_key_file & - # certificate_file must contain the same file - # name. - # certificate_file = ${raddbdir}/certs/cert-srv.pem - - # Trusted Root CA list - # CA_file = ${raddbdir}/certs/demoCA/cacert.pem - - - # - # For DH cipher suites to work, you have to - # run OpenSSL to create the DH file first: - # - # openssl dhparam -out certs/dh 1024 - # - # dh_file = ${raddbdir}/certs/dh - # random_file = ${raddbdir}/certs/random - - # - # This can never exceed the size of a RADIUS - # packet (4096 bytes), and is preferably half - # that, to accomodate other attributes in - # RADIUS packet. On most APs the MAX packet - # length is configured between 1500 - 1600 - # In these cases, fragment size should be - # 1024 or less. - # - # fragment_size = 1024 - - # include_length is a flag which is - # by default set to yes If set to - # yes, Total Length of the message is - # included in EVERY packet we send. - # If set to no, Total Length of the - # message is included ONLY in the - # First packet of a fragment series. - # - # include_length = yes - - # Check the Certificate Revocation List - # - # 1) Copy CA certificates and CRLs to same directory. - # 2) Execute 'c_rehash '. - # 'c_rehash' is OpenSSL's command. - # 3) Add 'CA_path=' - # to radiusd.conf's tls section. - # 4) uncomment the line below. - # 5) Restart radiusd - # check_crl = yes - - # - # If check_cert_issuer is set, the value will - # be checked against the DN of the issuer in - # the client certificate. If the values do not - # match, the cerficate verification will fail, - # rejecting the user. - # - # check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd" - - # - # If check_cert_cn is set, the value will - # be xlat'ed and checked against the CN - # in the client certificate. If the values - # do not match, the certificate verification - # will fail rejecting the user. - # - # This check is done only if the previous - # "check_cert_issuer" is not set, or if - # the check succeeds. - # - # check_cert_cn = %{User-Name} - # - # Set this option to specify the allowed - # TLS cipher suites. The format is listed - # in "man 1 ciphers". - # cipher_list = "DEFAULT" - #} - - # The TTLS module implements the EAP-TTLS protocol, - # which can be described as EAP inside of Diameter, - # inside of TLS, inside of EAP, inside of RADIUS... - # - # Surprisingly, it works quite well. - # - # The TTLS module needs the TLS module to be installed - # and configured, in order to use the TLS tunnel - # inside of the EAP packet. You will still need to - # configure the TLS module, even if you do not want - # to deploy EAP-TLS in your network. Users will not - # be able to request EAP-TLS, as it requires them to - # have a client certificate. EAP-TTLS does not - # require a client certificate. - # - #ttls { - # The tunneled EAP session needs a default - # EAP type which is separate from the one for - # the non-tunneled EAP module. Inside of the - # TTLS tunnel, we recommend using EAP-MD5. - # If the request does not contain an EAP - # conversation, then this configuration entry - # is ignored. - # default_eap_type = md5 - - # The tunneled authentication request does - # not usually contain useful attributes - # like 'Calling-Station-Id', etc. These - # attributes are outside of the tunnel, - # and normally unavailable to the tunneled - # authentication request. - # - # By setting this configuration entry to - # 'yes', any attribute which NOT in the - # tunneled authentication request, but - # which IS available outside of the tunnel, - # is copied to the tunneled request. - # - # allowed values: {no, yes} - # copy_request_to_tunnel = no - - # The reply attributes sent to the NAS are - # usually based on the name of the user - # 'outside' of the tunnel (usually - # 'anonymous'). If you want to send the - # reply attributes based on the user name - # inside of the tunnel, then set this - # configuration entry to 'yes', and the reply - # to the NAS will be taken from the reply to - # the tunneled request. - # - # allowed values: {no, yes} - # use_tunneled_reply = no - #} - - ################################################## - # - # !!!!! WARNINGS for Windows compatibility !!!!! - # - ################################################## - # - # If you see the server send an Access-Challenge, - # and the client never sends another Access-Request, - # then - # - # STOP! - # - # The server certificate has to have special OID's - # in it, or else the Microsoft clients will silently - # fail. See the "scripts/xpextensions" file for - # details, and the following page: - # - # http://support.microsoft.com/kb/814394/en-us - # - # For additional Windows XP SP2 issues, see: - # - # http://support.microsoft.com/kb/885453/en-us - # - # Note that we do not necessarily agree with their - # explanation... but the fix does appear to work. - # - ################################################## - - # - # The tunneled EAP session needs a default EAP type - # which is separate from the one for the non-tunneled - # EAP module. Inside of the TLS/PEAP tunnel, we - # recommend using EAP-MS-CHAPv2. - # - # The PEAP module needs the TLS module to be installed - # and configured, in order to use the TLS tunnel - # inside of the EAP packet. You will still need to - # configure the TLS module, even if you do not want - # to deploy EAP-TLS in your network. Users will not - # be able to request EAP-TLS, as it requires them to - # have a client certificate. EAP-PEAP does not - # require a client certificate. - # - # peap { - # The tunneled EAP session needs a default - # EAP type which is separate from the one for - # the non-tunneled EAP module. Inside of the - # PEAP tunnel, we recommend using MS-CHAPv2, - # as that is the default type supported by - # Windows clients. - # default_eap_type = mschapv2 - - # the PEAP module also has these configuration - # items, which are the same as for TTLS. - # copy_request_to_tunnel = no - # use_tunneled_reply = no - - # When the tunneled session is proxied, the - # home server may not understand EAP-MSCHAP-V2. - # Set this entry to "no" to proxy the tunneled - # EAP-MSCHAP-V2 as normal MSCHAPv2. - # proxy_tunneled_request_as_eap = yes - #} - - # - # This takes no configuration. - # - # Note that it is the EAP MS-CHAPv2 sub-module, not - # the main 'mschap' module. - # - # Note also that in order for this sub-module to work, - # the main 'mschap' module MUST ALSO be configured. - # - # This module is the *Microsoft* implementation of MS-CHAPv2 - # in EAP. There is another (incompatible) implementation - # of MS-CHAPv2 in EAP by Cisco, which FreeRADIUS does not - # currently support. - # - mschapv2 { - } - } - diff --git a/files/etc/freeradius/eap.conf.template b/files/etc/freeradius/eap.conf.template deleted file mode 100644 index 1280deb..0000000 --- a/files/etc/freeradius/eap.conf.template +++ /dev/null @@ -1,335 +0,0 @@ -# -*- text -*- -# -# Whatever you do, do NOT set 'Auth-Type := EAP'. The server -# is smart enough to figure this out on its own. The most -# common side effect of setting 'Auth-Type := EAP' is that the -# users then cannot use ANY other authentication method. -# -# $Id: eap.conf,v 1.4.4.4 2006/10/18 19:15:14 aland Exp $ -# - eap { - # Invoke the default supported EAP type when - # EAP-Identity response is received. - # - # The incoming EAP messages DO NOT specify which EAP - # type they will be using, so it MUST be set here. - # - # For now, only one default EAP type may be used at a time. - # - # If the EAP-Type attribute is set by another module, - # then that EAP type takes precedence over the - # default type configured here. - # - default_eap_type = ttls - - # A list is maintained to correlate EAP-Response - # packets with EAP-Request packets. After a - # configurable length of time, entries in the list - # expire, and are deleted. - # - timer_expire = 60 - - # There are many EAP types, but the server has support - # for only a limited subset. If the server receives - # a request for an EAP type it does not support, then - # it normally rejects the request. By setting this - # configuration to "yes", you can tell the server to - # instead keep processing the request. Another module - # MUST then be configured to proxy the request to - # another RADIUS server which supports that EAP type. - # - # If another module is NOT configured to handle the - # request, then the request will still end up being - # rejected. - ignore_unknown_eap_types = no - - # Cisco AP1230B firmware 12.2(13)JA1 has a bug. When given - # a User-Name attribute in an Access-Accept, it copies one - # more byte than it should. - # - # We can work around it by configurably adding an extra - # zero byte. - cisco_accounting_username_bug = no - - # Supported EAP-types - - # - # We do NOT recommend using EAP-MD5 authentication - # for wireless connections. It is insecure, and does - # not provide for dynamic WEP keys. - # - #md5 { - #} - - # Cisco LEAP - # - # We do not recommend using LEAP in new deployments. See: - # http://www.securiteam.com/tools/5TP012ACKE.html - # - # Cisco LEAP uses the MS-CHAP algorithm (but not - # the MS-CHAP attributes) to perform it's authentication. - # - # As a result, LEAP *requires* access to the plain-text - # User-Password, or the NT-Password attributes. - # 'System' authentication is impossible with LEAP. - # - #leap { - #} - - # Generic Token Card. - # - # Currently, this is only permitted inside of EAP-TTLS, - # or EAP-PEAP. The module "challenges" the user with - # text, and the response from the user is taken to be - # the User-Password. - # - # Proxying the tunneled EAP-GTC session is a bad idea, - # the users password will go over the wire in plain-text, - # for anyone to see. - # - #gtc { - # The default challenge, which many clients - # ignore.. - #challenge = "Password: " - - # The plain-text response which comes back - # is put into a User-Password attribute, - # and passed to another module for - # authentication. This allows the EAP-GTC - # response to be checked against plain-text, - # or crypt'd passwords. - # - # If you say "Local" instead of "PAP", then - # the module will look for a User-Password - # configured for the request, and do the - # authentication itself. - # - # auth_type = PAP - #} - - ## EAP-TLS - # - # To generate ctest certificates, run the script - # - # ../scripts/certs.sh - # - # The documents on http://www.freeradius.org/doc - # are old, but may be helpful. - # - # See also: - # - # http://www.dslreports.com/forum/remark,9286052~mode=flat - # - tls { - private_key_password = #PASSWORD# - private_key_file = ${raddbdir}/certs/cert-srv.pem - - # If Private key & Certificate are located in - # the same file, then private_key_file & - # certificate_file must contain the same file - # name. - certificate_file = ${raddbdir}/certs/cert-srv.pem - - # Trusted Root CA list - CA_file = ${raddbdir}/certs/root.pem - - dh_file = ${raddbdir}/certs/dh - random_file = /dev/urandom - - # - # This can never exceed the size of a RADIUS - # packet (4096 bytes), and is preferably half - # that, to accomodate other attributes in - # RADIUS packet. On most APs the MAX packet - # length is configured between 1500 - 1600 - # In these cases, fragment size should be - # 1024 or less. - # - fragment_size = 1024 - - # include_length is a flag which is - # by default set to yes If set to - # yes, Total Length of the message is - # included in EVERY packet we send. - # If set to no, Total Length of the - # message is included ONLY in the - # First packet of a fragment series. - # - include_length = yes - - # Check the Certificate Revocation List - # - # 1) Copy CA certificates and CRLs to same directory. - # 2) Execute 'c_rehash '. - # 'c_rehash' is OpenSSL's command. - # 3) Add 'CA_path=' - # to radiusd.conf's tls section. - # 4) uncomment the line below. - # 5) Restart radiusd - check_crl = yes - - # - # If check_cert_issuer is set, the value will - # be checked against the DN of the issuer in - # the client certificate. If the values do not - # match, the cerficate verification will fail, - # rejecting the user. - # - # check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd" - - # - # If check_cert_cn is set, the value will - # be xlat'ed and checked against the CN - # in the client certificate. If the values - # do not match, the certificate verification - # will fail rejecting the user. - # - # This check is done only if the previous - # "check_cert_issuer" is not set, or if - # the check succeeds. - # - # check_cert_cn = %{User-Name} - # - # Set this option to specify the allowed - # TLS cipher suites. The format is listed - # in "man 1 ciphers". - # cipher_list = "DEFAULT" - } - - # The TTLS module implements the EAP-TTLS protocol, - # which can be described as EAP inside of Diameter, - # inside of TLS, inside of EAP, inside of RADIUS... - # - # Surprisingly, it works quite well. - # - # The TTLS module needs the TLS module to be installed - # and configured, in order to use the TLS tunnel - # inside of the EAP packet. You will still need to - # configure the TLS module, even if you do not want - # to deploy EAP-TLS in your network. Users will not - # be able to request EAP-TLS, as it requires them to - # have a client certificate. EAP-TTLS does not - # require a client certificate. - # - ttls { - # The tunneled EAP session needs a default - # EAP type which is separate from the one for - # the non-tunneled EAP module. Inside of the - # TTLS tunnel, we recommend using EAP-MD5. - # If the request does not contain an EAP - # conversation, then this configuration entry - # is ignored. - # default_eap_type = md5 - - # The tunneled authentication request does - # not usually contain useful attributes - # like 'Calling-Station-Id', etc. These - # attributes are outside of the tunnel, - # and normally unavailable to the tunneled - # authentication request. - # - # By setting this configuration entry to - # 'yes', any attribute which NOT in the - # tunneled authentication request, but - # which IS available outside of the tunnel, - # is copied to the tunneled request. - # - # allowed values: {no, yes} - copy_request_to_tunnel = yes - - # The reply attributes sent to the NAS are - # usually based on the name of the user - # 'outside' of the tunnel (usually - # 'anonymous'). If you want to send the - # reply attributes based on the user name - # inside of the tunnel, then set this - # configuration entry to 'yes', and the reply - # to the NAS will be taken from the reply to - # the tunneled request. - # - # allowed values: {no, yes} - use_tunneled_reply = yes - } - - ################################################## - # - # !!!!! WARNINGS for Windows compatibility !!!!! - # - ################################################## - # - # If you see the server send an Access-Challenge, - # and the client never sends another Access-Request, - # then - # - # STOP! - # - # The server certificate has to have special OID's - # in it, or else the Microsoft clients will silently - # fail. See the "scripts/xpextensions" file for - # details, and the following page: - # - # http://support.microsoft.com/kb/814394/en-us - # - # For additional Windows XP SP2 issues, see: - # - # http://support.microsoft.com/kb/885453/en-us - # - # Note that we do not necessarily agree with their - # explanation... but the fix does appear to work. - # - ################################################## - - # - # The tunneled EAP session needs a default EAP type - # which is separate from the one for the non-tunneled - # EAP module. Inside of the TLS/PEAP tunnel, we - # recommend using EAP-MS-CHAPv2. - # - # The PEAP module needs the TLS module to be installed - # and configured, in order to use the TLS tunnel - # inside of the EAP packet. You will still need to - # configure the TLS module, even if you do not want - # to deploy EAP-TLS in your network. Users will not - # be able to request EAP-TLS, as it requires them to - # have a client certificate. EAP-PEAP does not - # require a client certificate. - # - # peap { - # The tunneled EAP session needs a default - # EAP type which is separate from the one for - # the non-tunneled EAP module. Inside of the - # PEAP tunnel, we recommend using MS-CHAPv2, - # as that is the default type supported by - # Windows clients. - # default_eap_type = mschapv2 - - # the PEAP module also has these configuration - # items, which are the same as for TTLS. - # copy_request_to_tunnel = no - # use_tunneled_reply = no - - # When the tunneled session is proxied, the - # home server may not understand EAP-MSCHAP-V2. - # Set this entry to "no" to proxy the tunneled - # EAP-MSCHAP-V2 as normal MSCHAPv2. - # proxy_tunneled_request_as_eap = yes - #} - - # - # This takes no configuration. - # - # Note that it is the EAP MS-CHAPv2 sub-module, not - # the main 'mschap' module. - # - # Note also that in order for this sub-module to work, - # the main 'mschap' module MUST ALSO be configured. - # - # This module is the *Microsoft* implementation of MS-CHAPv2 - # in EAP. There is another (incompatible) implementation - # of MS-CHAPv2 in EAP by Cisco, which FreeRADIUS does not - # currently support. - # - #mschapv2 { - #} - } - diff --git a/files/etc/freeradius/hints.expect b/files/etc/freeradius/hints.expect deleted file mode 100644 index 2943d08..0000000 --- a/files/etc/freeradius/hints.expect +++ /dev/null @@ -1,77 +0,0 @@ -# hints -# -# The hints file. This file is used to match -# a request, and then add attributes to it. This -# process allows a user to login as "bob.ppp" (for example), -# and receive a PPP connection, even if the NAS doesn't -# ask for PPP. The "hints" file is used to match the -# ".ppp" portion of the username, and to add a set of -# "user requested PPP" attributes to the request. -# -# Matching can take place with the the Prefix and Suffix -# attributes, just like in the "users" file. -# These attributes operate ONLY on the username, though. -# -# Note that the attributes that are set for each -# entry are _NOT_ passed back to the terminal server. -# Instead they are added to the information that has -# been _SENT_ by the terminal server. -# -# This extra information can be used in the users file to -# match on. Usually this is done in the DEFAULT entries, -# of which there can be more than one. -# -# In addition a matching entry can transform a username -# for authentication purposes if the "Strip-User-Name" -# variable is set to Yes in an entry (default is Yes). -# -# A special non-protocol name-value pair called "Hint" -# can be set to match on in the "users" file. -# -# The following is how most ISPs want to set this up. -# -# Version: $Id: hints,v 1.4 2004/01/29 16:42:43 aland Exp $ -# - - -#DEFAULT Suffix == ".ppp", Strip-User-Name = Yes -# Hint = "PPP", -# Service-Type = Framed-User, -# Framed-Protocol = PPP -# -#DEFAULT Suffix == ".slip", Strip-User-Name = Yes -# Hint = "SLIP", -# Service-Type = Framed-User, -# Framed-Protocol = SLIP -# -#DEFAULT Suffix == ".cslip", Strip-User-Name = Yes -# Hint = "CSLIP", -# Service-Type = Framed-User, -# Framed-Protocol = SLIP, -# Framed-Compression = Van-Jacobson-TCP-IP - -###################################################################### -# -# These entries are old, and commented out by default. -# They confuse too many people when "Peter" logs in, and the -# server thinks that the user "eter" is asking for PPP. -# -#DEFAULT Prefix == "U", Strip-User-Name = No -# Hint = "UUCP" - -#DEFAULT Prefix == "P", Strip-User-Name = Yes -# Hint = "PPP", -# Service-Type = Framed-User, -# Framed-Protocol = PPP - -#DEFAULT Prefix == "S", Strip-User-Name = Yes -# Hint = "SLIP", -# Service-Type = Framed-User, -# Framed-Protocol = SLIP - -#DEFAULT Prefix == "C", Strip-User-Name = Yes -# Hint = "CSLIP", -# Service-Type = Framed-User, -# Framed-Protocol = SLIP, -# Framed-Compression = Van-Jacobson-TCP-IP - diff --git a/files/etc/freeradius/hints.restore b/files/etc/freeradius/hints.restore deleted file mode 100644 index a4986e6..0000000 --- a/files/etc/freeradius/hints.restore +++ /dev/null @@ -1,77 +0,0 @@ -# hints -# -# The hints file. This file is used to match -# a request, and then add attributes to it. This -# process allows a user to login as "bob.ppp" (for example), -# and receive a PPP connection, even if the NAS doesn't -# ask for PPP. The "hints" file is used to match the -# ".ppp" portion of the username, and to add a set of -# "user requested PPP" attributes to the request. -# -# Matching can take place with the the Prefix and Suffix -# attributes, just like in the "users" file. -# These attributes operate ONLY on the username, though. -# -# Note that the attributes that are set for each -# entry are _NOT_ passed back to the terminal server. -# Instead they are added to the information that has -# been _SENT_ by the terminal server. -# -# This extra information can be used in the users file to -# match on. Usually this is done in the DEFAULT entries, -# of which there can be more than one. -# -# In addition a matching entry can transform a username -# for authentication purposes if the "Strip-User-Name" -# variable is set to Yes in an entry (default is Yes). -# -# A special non-protocol name-value pair called "Hint" -# can be set to match on in the "users" file. -# -# The following is how most ISPs want to set this up. -# -# Version: $Id: hints,v 1.4 2004/01/29 16:42:43 aland Exp $ -# - - -DEFAULT Suffix == ".ppp", Strip-User-Name = Yes - Hint = "PPP", - Service-Type = Framed-User, - Framed-Protocol = PPP - -DEFAULT Suffix == ".slip", Strip-User-Name = Yes - Hint = "SLIP", - Service-Type = Framed-User, - Framed-Protocol = SLIP - -DEFAULT Suffix == ".cslip", Strip-User-Name = Yes - Hint = "CSLIP", - Service-Type = Framed-User, - Framed-Protocol = SLIP, - Framed-Compression = Van-Jacobson-TCP-IP - -###################################################################### -# -# These entries are old, and commented out by default. -# They confuse too many people when "Peter" logs in, and the -# server thinks that the user "eter" is asking for PPP. -# -#DEFAULT Prefix == "U", Strip-User-Name = No -# Hint = "UUCP" - -#DEFAULT Prefix == "P", Strip-User-Name = Yes -# Hint = "PPP", -# Service-Type = Framed-User, -# Framed-Protocol = PPP - -#DEFAULT Prefix == "S", Strip-User-Name = Yes -# Hint = "SLIP", -# Service-Type = Framed-User, -# Framed-Protocol = SLIP - -#DEFAULT Prefix == "C", Strip-User-Name = Yes -# Hint = "CSLIP", -# Service-Type = Framed-User, -# Framed-Protocol = SLIP, -# Framed-Compression = Van-Jacobson-TCP-IP - diff --git a/files/etc/freeradius/ldap.attrmap.expect b/files/etc/freeradius/ldap.attrmap.expect deleted file mode 100644 index 6216e2e..0000000 --- a/files/etc/freeradius/ldap.attrmap.expect +++ /dev/null @@ -1,24 +0,0 @@ -# -# Mapping of RADIUS dictionary attributes to LDAP directory attributes -# to be used by LDAP authentication and authorization module (rlm_ldap) -# -# Format: -# ItemType RADIUS-Attribute-Name ldapAttributeName -# -# Where: -# ItemType = checkItem or replyItem -# RADIUS-Attribute-Name = attribute name in RADIUS dictionary -# ldapAttributeName = attribute name in LDAP schema -# -# If $ is specified as RADIUS-Attribute-Name, the line specifies -# a LDAP attribute which can be used to store any RADIUS -# attribute/value-pair in LDAP directory. -# -# You should edit this file to suit it to your needs. -# - -replyItem Connect-Info hrEduPersonExpireDate -replyItem Class hrEduPersonUniqueNumber -replyItem Configuration-Token hrEduPersonPrimaryAffiliation -replyItem Callback-Number hrEduPersonUniqueID - diff --git a/files/etc/freeradius/ldap.attrmap.restore b/files/etc/freeradius/ldap.attrmap.restore deleted file mode 100644 index e686556..0000000 --- a/files/etc/freeradius/ldap.attrmap.restore +++ /dev/null @@ -1,60 +0,0 @@ -# -# Mapping of RADIUS dictionary attributes to LDAP directory attributes -# to be used by LDAP authentication and authorization module (rlm_ldap) -# -# Format: -# ItemType RADIUS-Attribute-Name ldapAttributeName -# -# Where: -# ItemType = checkItem or replyItem -# RADIUS-Attribute-Name = attribute name in RADIUS dictionary -# ldapAttributeName = attribute name in LDAP schema -# -# If $GENERIC$ is specified as RADIUS-Attribute-Name, the line specifies -# a LDAP attribute which can be used to store any RADIUS -# attribute/value-pair in LDAP directory. -# -# You should edit this file to suit it to your needs. -# - -checkItem $GENERIC$ radiusCheckItem -replyItem $GENERIC$ radiusReplyItem - -checkItem Auth-Type radiusAuthType -checkItem Simultaneous-Use radiusSimultaneousUse -checkItem Called-Station-Id radiusCalledStationId -checkItem Calling-Station-Id radiusCallingStationId -checkItem LM-Password lmPassword -checkItem NT-Password ntPassword -checkItem SMB-Account-CTRL-TEXT acctFlags -checkItem Expiration radiusExpiration -checkItem NAS-IP-Address radiusNASIpAddress - -replyItem Service-Type radiusServiceType -replyItem Framed-Protocol radiusFramedProtocol -replyItem Framed-IP-Address radiusFramedIPAddress -replyItem Framed-IP-Netmask radiusFramedIPNetmask -replyItem Framed-Route radiusFramedRoute -replyItem Framed-Routing radiusFramedRouting -replyItem Filter-Id radiusFilterId -replyItem Framed-MTU radiusFramedMTU -replyItem Framed-Compression radiusFramedCompression -replyItem Login-IP-Host radiusLoginIPHost -replyItem Login-Service radiusLoginService -replyItem Login-TCP-Port radiusLoginTCPPort -replyItem Callback-Number radiusCallbackNumber -replyItem Callback-Id radiusCallbackId -replyItem Framed-IPX-Network radiusFramedIPXNetwork -replyItem Class radiusClass -replyItem Session-Timeout radiusSessionTimeout -replyItem Idle-Timeout radiusIdleTimeout -replyItem Termination-Action radiusTerminationAction -replyItem Login-LAT-Service radiusLoginLATService -replyItem Login-LAT-Node radiusLoginLATNode -replyItem Login-LAT-Group radiusLoginLATGroup -replyItem Framed-AppleTalk-Link radiusFramedAppleTalkLink -replyItem Framed-AppleTalk-Network radiusFramedAppleTalkNetwork -replyItem Framed-AppleTalk-Zone radiusFramedAppleTalkZone -replyItem Port-Limit radiusPortLimit -replyItem Login-LAT-Port radiusLoginLATPort -replyItem Reply-Message radiusReplyMessage diff --git a/files/etc/freeradius/proxy.conf.restore b/files/etc/freeradius/proxy.conf.restore deleted file mode 100644 index 032b7a0..0000000 --- a/files/etc/freeradius/proxy.conf.restore +++ /dev/null @@ -1,288 +0,0 @@ -# -# proxy.conf - proxy radius and realm configuration directives -# -# This file is included by default. To disable it, you will need -# to modify the PROXY CONFIGURATION section of "radiusd.conf". -# -####################################################################### -# -# Proxy server configuration -# -# This entry controls the servers behaviour towards ALL other servers -# to which it sends proxy requests. -# -proxy server { - -# -# If the NAS re-sends the request to us, we can immediately re-send -# the proxy request to the end server. To do so, use 'yes' here. -# -# If this is set to 'no', then we send the retries on our own schedule, -# and ignore any duplicate NAS requests. -# -# If you want to have the server send proxy retries ONLY when the NAS -# sends it's retries to the server, then set this to 'yes', and -# set the other proxy configuration parameters to 0 (zero). -# -# Additionally, if you want 'failover' to work, the server must manage -# retries and timeouts. Therefore, if this is set to yes, then no -# failover functionality is possible. -# - synchronous = no - -# -# The time (in seconds) to wait for a response from the proxy, before -# re-sending the proxied request. -# -# If this time is set too high, then the NAS may re-send the request, -# or it may give up entirely, and reject the user. -# -# If it is set too low, then the RADIUS server which receives the proxy -# request will get kicked unnecessarily. -# - retry_delay = 5 - -# -# The number of retries to send before giving up, and sending a reject -# message to the NAS. -# - retry_count = 3 - -# -# If the home server does not respond to any of the multiple retries, -# then FreeRADIUS will stop sending it proxy requests, and mark it 'dead'. -# -# If there are multiple entries configured for this realm, then the -# server will fail-over to the next one listed. If no more are listed, -# then no requests will be proxied to that realm. -# -# -# After a configurable 'dead_time', in seconds, FreeRADIUS will -# speculatively mark the home server active, and start sending requests -# to it again. -# -# If this dead time is set too low, then you will lose requests, -# as FreeRADIUS will quickly switch back to the home server, even if -# it isn't up again. -# -# If this dead time is set too high, then FreeRADIUS may take too long -# to switch back to the primary home server. -# -# Realistic values for this number are in the range of minutes to hours. -# (60 to 3600) -# - dead_time = 120 - -# An ldflag attribute for all realms to be included in a round-robin -# setup must be specified, and that ldflag must be the same for all -# realms of the same name. -# Currently (0 or fail_over) and (1 or round_robin) are the -# supported values for ldflag. Fail over is the default setup. -# -# DO NOT INCLUDE LOCAL AUTH/ACCT HOST REALMS IN A ROUND-ROBIN QUEUE. - - -# -# If all exact matching realms did not respond, we can try the -# DEFAULT realm, too. This is what the server normally does. -# -# This behaviour may be undesired for some cases. e.g. You are proxying -# for two different ISP's, and then act as a general dial-up for Gric. -# If one of the first two ISP's has their RADIUS server go down, you do -# NOT want to proxy those requests to GRIC. Instead, you probably want -# to just drop the requests on the floor. In that case, set this value -# to 'no'. -# -# allowed values: {yes, no} -# - default_fallback = yes - -# -# Older versions of the server would pass proxy requests through the -# 'authorize' sections twice; once when the packet was received -# from the NAS, and again after the reply was received from the home -# server. Now that we have a 'post_proxy' section, the replies from -# the home server should be sent through that, instead of through -# the 'authorize' section again. -# -# However, for backwards compatibility, this behaviour is configurable. -# The default configuration is 'no', because this option is deprecated -# and will be removed in the future. -# -# allowed values: {yes, no} -# - post_proxy_authorize = no - -} - -####################################################################### -# -# Configuration for the proxy realms. -# -# The information given here is used in conjunction with the 'realms' -# file. This format is preferred, as it is more flexible. The realms -# listed here take priority over those listed in the 'realms' file. - -# A standard realm entry. A request from "user@company.com" will be -# sent to radius.company.com as "user", unless the 'nostrip' -# configuration item is specified. If the 'nostrip' configuration -# item is specified, then the request will be proxied as -# "user@company.com" -# -#realm company.com { -# type = radius -# authhost = radius.company.com:1600 -# accthost = radius.company.com:1601 -# secret = testing123 -#} - -# A realm entry with an optional fail-over realm. A request from -# "user@isp2.com" will be sent to radius.isp2.com as "user@isp2.com", -# because the 'nostrip' directive is specified for this realm. -# -#realm isp2.com { -# type = radius -# authhost = radius.isp2.com:1645 -# accthost = radius.isp2.com:1646 -# secret = TheirKey -# nostrip -#} -# -# The fail-over realm for isp2.com -# -#realm isp2.com { -# type = radius -# authhost = radius2.isp2.com:1645 -# accthost = radius2.isp2.com:1646 -# secret = TheirKey2 -# nostrip -#} - -# -# 1st node serv.com...set up for round-robin. -# -# The load balancing 'ldflag' attribute can be used to perform -# load balancing. Allowed values are 'fail_over' and 'round_robin'. -# -# If there is no ldflag attribute, or it is set to 'fail_over', then -# the realms are treated as "fail-over". That is, the first matching -# realm is used, unless it is down, in which case the realm "fails -# over" to the second matching realm. The process continues until an -# active matching realm is found, OR the DEFAULT realm is returned. -# -# If the ldflag attribute is set to 'round_robin', then all active -# realms of the same name are put into a pool internally in the -# server, and the proxied requests are evenly divided among the -# realms in the pool. For this to work, all realms of the same name -# MUST have the same value of their 'ldflag' attributes. Mixing up -# different types of load balancing schemes for the same realm will -# cause problems. -# -# The round_robin load balancing method is a probabilistic method -# which evenly scatters the requests among the home servers. -# -# Note that you CANNOT include local auth/acct host realms in a -# round-robin queue. Having a server load balance requests to itself -# doesn't make any sense, as it only doubles the amount of work -# which is needed to be done. -# -#realm serv.com { -# type = radius -# authhost = radius.serv.com:1645 -# accthost = radius.serv.com:1646 -# secret = TheirKey -# ldflag = round_robin -# nostrip -#} - -# -# Another node for serv.com -# -#realm serv.com { -# type = radius -# authhost = radius2.serv.com:1645 -# accthost = radius2.serv.com:1646 -# secret = TheirKey2 -# ldflag = round_robin -# nostrip -#} - -# -# A third round-robin node realm for serv.com -# -#realm serv.com { -# type = radius -# authhost = radius3.serv.com:1645 -# accthost = radius3.serv.com:1646 -# secret = TheirKey2 -# ldflag = round_robin -# nostrip -#} -# -# - -# -# This is a local realm. The requests are NOT proxied, -# but instead are authenticated by the RADIUS server itself. -# -# You don't need a secret if BOTH 'authhost' and 'accthost' are -# set to LOCAL. -# -#realm bla.com { -# type = radius -# authhost = LOCAL -# accthost = LOCAL -#} - -# -# This is a sample entry for iPass. -# -#realm IPASS { -# type = radius -# authhost = ipass.server.hostname:11812 -# accthost = ipass.server.hostname:11813 -# - # The shared secret here must be the same - # value as the secret of the NetServer found in the - # /usr/ipass/raddb/clients file of your NetServer software. -# secret = mysecret -# nostrip -#} - -# -# This realm is used mainly to cancel proxying. You can have -# the "realm suffix" module configured to proxy all requests for -# a realm, and then later cancel the proxying, based on other -# configuration. -# -# For example, you want to terminate PEAP or EAP-TTLS locally, -# you can add the following to the "users" file: -# -# DEFAULT EAP-Type == PEAP, Proxy-To-Realm := LOCAL -# -realm LOCAL { - type = radius - authhost = LOCAL - accthost = LOCAL -} - -# -# This realm is for requests which don't have an explicit realm -# prefix or suffix. User names like "bob" will match this one. -# -#realm NULL { -# type = radius -# authhost = radius.company.com:1600 -# accthost = radius.company.com:1601 -# secret = testing123 -#} - -# -# This realm is for ALL OTHER requests. -# -#realm DEFAULT { -# type = radius -# authhost = radius.company.com:1600 -# accthost = radius.company.com:1601 -# secret = testing123 -#} diff --git a/files/etc/freeradius/proxy.conf.template b/files/etc/freeradius/proxy.conf.template deleted file mode 100644 index b40eb4e..0000000 --- a/files/etc/freeradius/proxy.conf.template +++ /dev/null @@ -1,296 +0,0 @@ -# -# proxy.conf - proxy radius and realm configuration directives -# -# This file is included by default. To disable it, you will need -# to modify the PROXY CONFIGURATION section of "radiusd.conf". -# -####################################################################### -# -# Proxy server configuration -# -# This entry controls the servers behaviour towards ALL other servers -# to which it sends proxy requests. -# -proxy server { - -# -# If the NAS re-sends the request to us, we can immediately re-send -# the proxy request to the end server. To do so, use 'yes' here. -# -# If this is set to 'no', then we send the retries on our own schedule, -# and ignore any duplicate NAS requests. -# -# If you want to have the server send proxy retries ONLY when the NAS -# sends it's retries to the server, then set this to 'yes', and -# set the other proxy configuration parameters to 0 (zero). -# -# Additionally, if you want 'failover' to work, the server must manage -# retries and timeouts. Therefore, if this is set to yes, then no -# failover functionality is possible. -# - synchronous = no - -# -# The time (in seconds) to wait for a response from the proxy, before -# re-sending the proxied request. -# -# If this time is set too high, then the NAS may re-send the request, -# or it may give up entirely, and reject the user. -# -# If it is set too low, then the RADIUS server which receives the proxy -# request will get kicked unnecessarily. -# - retry_delay = 5 - -# -# The number of retries to send before giving up, and sending a reject -# message to the NAS. -# - retry_count = 1 - -# -# If the home server does not respond to any of the multiple retries, -# then FreeRADIUS will stop sending it proxy requests, and mark it 'dead'. -# -# If there are multiple entries configured for this realm, then the -# server will fail-over to the next one listed. If no more are listed, -# then no requests will be proxied to that realm. -# -# -# After a configurable 'dead_time', in seconds, FreeRADIUS will -# speculatively mark the home server active, and start sending requests -# to it again. -# -# If this dead time is set too low, then you will lose requests, -# as FreeRADIUS will quickly switch back to the home server, even if -# it isn't up again. -# -# If this dead time is set too high, then FreeRADIUS may take too long -# to switch back to the primary home server. -# -# Realistic values for this number are in the range of minutes to hours. -# (60 to 3600) -# - dead_time = 30 - -# An ldflag attribute for all realms to be included in a round-robin -# setup must be specified, and that ldflag must be the same for all -# realms of the same name. -# Currently (0 or fail_over) and (1 or round_robin) are the -# supported values for ldflag. Fail over is the default setup. -# -# DO NOT INCLUDE LOCAL AUTH/ACCT HOST REALMS IN A ROUND-ROBIN QUEUE. - - -# -# If all exact matching realms did not respond, we can try the -# DEFAULT realm, too. This is what the server normally does. -# -# This behaviour may be undesired for some cases. e.g. You are proxying -# for two different ISP's, and then act as a general dial-up for Gric. -# If one of the first two ISP's has their RADIUS server go down, you do -# NOT want to proxy those requests to GRIC. Instead, you probably want -# to just drop the requests on the floor. In that case, set this value -# to 'no'. -# -# allowed values: {yes, no} -# - default_fallback = yes - -# -# Older versions of the server would pass proxy requests through the -# 'authorize' sections twice; once when the packet was received -# from the NAS, and again after the reply was received from the home -# server. Now that we have a 'post_proxy' section, the replies from -# the home server should be sent through that, instead of through -# the 'authorize' section again. -# -# However, for backwards compatibility, this behaviour is configurable. -# The default configuration is 'no', because this option is deprecated -# and will be removed in the future. -# -# allowed values: {yes, no} -# - post_proxy_authorize = no - -} - -####################################################################### -# -# Configuration for the proxy realms. -# -# The information given here is used in conjunction with the 'realms' -# file. This format is preferred, as it is more flexible. The realms -# listed here take priority over those listed in the 'realms' file. - -# A standard realm entry. A request from "user@company.com" will be -# sent to radius.company.com as "user", unless the 'nostrip' -# configuration item is specified. If the 'nostrip' configuration -# item is specified, then the request will be proxied as -# "user@company.com" -# -#realm company.com { -# type = radius -# authhost = radius.company.com:1600 -# accthost = radius.company.com:1601 -# secret = testing123 -#} - -# A realm entry with an optional fail-over realm. A request from -# "user@isp2.com" will be sent to radius.isp2.com as "user@isp2.com", -# because the 'nostrip' directive is specified for this realm. -# -#realm isp2.com { -# type = radius -# authhost = radius.isp2.com:1645 -# accthost = radius.isp2.com:1646 -# secret = TheirKey -# nostrip -#} -# -# The fail-over realm for isp2.com -# -#realm isp2.com { -# type = radius -# authhost = radius2.isp2.com:1645 -# accthost = radius2.isp2.com:1646 -# secret = TheirKey2 -# nostrip -#} - -# -# 1st node serv.com...set up for round-robin. -# -# The load balancing 'ldflag' attribute can be used to perform -# load balancing. Allowed values are 'fail_over' and 'round_robin'. -# -# If there is no ldflag attribute, or it is set to 'fail_over', then -# the realms are treated as "fail-over". That is, the first matching -# realm is used, unless it is down, in which case the realm "fails -# over" to the second matching realm. The process continues until an -# active matching realm is found, OR the DEFAULT realm is returned. -# -# If the ldflag attribute is set to 'round_robin', then all active -# realms of the same name are put into a pool internally in the -# server, and the proxied requests are evenly divided among the -# realms in the pool. For this to work, all realms of the same name -# MUST have the same value of their 'ldflag' attributes. Mixing up -# different types of load balancing schemes for the same realm will -# cause problems. -# -# The round_robin load balancing method is a probabilistic method -# which evenly scatters the requests among the home servers. -# -# Note that you CANNOT include local auth/acct host realms in a -# round-robin queue. Having a server load balance requests to itself -# doesn't make any sense, as it only doubles the amount of work -# which is needed to be done. -# -#realm serv.com { -# type = radius -# authhost = radius.serv.com:1645 -# accthost = radius.serv.com:1646 -# secret = TheirKey -# ldflag = round_robin -# nostrip -#} - -# -# Another node for serv.com -# -#realm serv.com { -# type = radius -# authhost = radius2.serv.com:1645 -# accthost = radius2.serv.com:1646 -# secret = TheirKey2 -# ldflag = round_robin -# nostrip -#} - -# -# A third round-robin node realm for serv.com -# -#realm serv.com { -# type = radius -# authhost = radius3.serv.com:1645 -# accthost = radius3.serv.com:1646 -# secret = TheirKey2 -# ldflag = round_robin -# nostrip -#} -# -# - -# -# This is a local realm. The requests are NOT proxied, -# but instead are authenticated by the RADIUS server itself. -# -# You don't need a secret if BOTH 'authhost' and 'accthost' are -# set to LOCAL. -# -#realm bla.com { -# type = radius -# authhost = LOCAL -# accthost = LOCAL -#} - -# -# This is a sample entry for iPass. -# -#realm IPASS { -# type = radius -# authhost = ipass.server.hostname:11812 -# accthost = ipass.server.hostname:11813 -# - # The shared secret here must be the same - # value as the secret of the NetServer found in the - # /usr/ipass/raddb/clients file of your NetServer software. -# secret = mysecret -# nostrip -#} - -# -# This realm is used mainly to cancel proxying. You can have -# the "realm suffix" module configured to proxy all requests for -# a realm, and then later cancel the proxying, based on other -# configuration. -# -# For example, you want to terminate PEAP or EAP-TTLS locally, -# you can add the following to the "users" file: -# -# DEFAULT EAP-Type == PEAP, Proxy-To-Realm := LOCAL -# -realm LOCAL { - type = radius - authhost = LOCAL - accthost = LOCAL -} - -# -# This realm is for requests which don't have an explicit realm -# prefix or suffix. User names like "bob" will match this one. -# -realm NULL { - type = radius - authhost = LOCAL - accthost = LOCAL -} - -realm #REALM#.hr { - type = radius - authhost = LOCAL - accthost = LOCAL -} - -# -# This realm is for ALL OTHER requests. -# -#realm DEFAULT { -# type = radius -# authhost = LOCAL -# accthost = LOCAL -#} - -# Eduroam configuration -$INCLUDE ${confdir}/proxy-eduroam.conf - diff --git a/files/etc/freeradius/radiusd.conf.restore b/files/etc/freeradius/radiusd.conf.restore deleted file mode 100644 index 200cf49..0000000 --- a/files/etc/freeradius/radiusd.conf.restore +++ /dev/null @@ -1,2146 +0,0 @@ -## -## radiusd.conf -- FreeRADIUS server configuration file. -## -## http://www.freeradius.org/ -## $Id: radiusd.conf.in,v 1.188.2.4.2.18 2007/07/16 10:53:13 pnixon Exp $ -## - -# The location of other config files and -# logfiles are declared in this file -# -# Also general configuration for modules can be done -# in this file, it is exported through the API to -# modules that ask for it. -# -# The configuration variables defined here are of the form ${foo} -# They are local to this file, and do not change from request to -# request. -# -# The per-request variables are of the form %{Attribute-Name}, and -# are taken from the values of the attribute in the incoming -# request. See 'doc/variables.txt' for more information. - -prefix = /usr -exec_prefix = /usr -sysconfdir = /etc -localstatedir = /var -sbindir = ${exec_prefix}/sbin -logdir = /var/log/freeradius -raddbdir = /etc/freeradius -radacctdir = ${logdir}/radacct - -# Location of config and logfiles. -confdir = ${raddbdir} -run_dir = ${localstatedir}/run/freeradius - -# -# The logging messages for the server are appended to the -# tail of this file. -# -log_file = ${logdir}/radius.log - -# -# libdir: Where to find the rlm_* modules. -# -# This should be automatically set at configuration time. -# -# If the server builds and installs, but fails at execution time -# with an 'undefined symbol' error, then you can use the libdir -# directive to work around the problem. -# -# The cause is usually that a library has been installed on your -# system in a place where the dynamic linker CANNOT find it. When -# executing as root (or another user), your personal environment MAY -# be set up to allow the dynamic linker to find the library. When -# executing as a daemon, FreeRADIUS MAY NOT have the same -# personalized configuration. -# -# To work around the problem, find out which library contains that symbol, -# and add the directory containing that library to the end of 'libdir', -# with a colon separating the directory names. NO spaces are allowed. -# -# e.g. libdir = /usr/local/lib:/opt/package/lib -# -# You can also try setting the LD_LIBRARY_PATH environment variable -# in a script which starts the server. -# -# If that does not work, then you can re-configure and re-build the -# server to NOT use shared libraries, via: -# -# ./configure --disable-shared -# make -# make install -# -libdir = /usr/lib/freeradius - -# pidfile: Where to place the PID of the RADIUS server. -# -# The server may be signalled while it's running by using this -# file. -# -# This file is written when ONLY running in daemon mode. -# -# e.g.: kill -HUP `cat /var/run/freeradius/freeradius.pid` -# -pidfile = ${run_dir}/freeradius.pid - - -# user/group: The name (or #number) of the user/group to run radiusd as. -# -# If these are commented out, the server will run as the user/group -# that started it. In order to change to a different user/group, you -# MUST be root ( or have root privleges ) to start the server. -# -# We STRONGLY recommend that you run the server with as few permissions -# as possible. That is, if you're not using shadow passwords, the -# user and group items below should be set to 'nobody'. -# -# On SCO (ODT 3) use "user = nouser" and "group = nogroup". -# -# NOTE that some kernels refuse to setgid(group) when the value of -# (unsigned)group is above 60000; don't use group nobody on these systems! -# -# On systems with shadow passwords, you might have to set 'group = shadow' -# for the server to be able to read the shadow password file. If you can -# authenticate users while in debug mode, but not in daemon mode, it may be -# that the debugging mode server is running as a user that can read the -# shadow info, and the user listed below can not. -# -user = freerad -group = freerad - -# max_request_time: The maximum time (in seconds) to handle a request. -# -# Requests which take more time than this to process may be killed, and -# a REJECT message is returned. -# -# WARNING: If you notice that requests take a long time to be handled, -# then this MAY INDICATE a bug in the server, in one of the modules -# used to handle a request, OR in your local configuration. -# -# This problem is most often seen when using an SQL database. If it takes -# more than a second or two to receive an answer from the SQL database, -# then it probably means that you haven't indexed the database. See your -# SQL server documentation for more information. -# -# Useful range of values: 5 to 120 -# -max_request_time = 30 - -# delete_blocked_requests: If the request takes MORE THAN 'max_request_time' -# to be handled, then maybe the server should delete it. -# -# If you're running in threaded, or thread pool mode, this setting -# should probably be 'no'. Setting it to 'yes' when using a threaded -# server MAY cause the server to crash! -# -delete_blocked_requests = no - -# cleanup_delay: The time to wait (in seconds) before cleaning up -# a reply which was sent to the NAS. -# -# The RADIUS request is normally cached internally for a short period -# of time, after the reply is sent to the NAS. The reply packet may be -# lost in the network, and the NAS will not see it. The NAS will then -# re-send the request, and the server will respond quickly with the -# cached reply. -# -# If this value is set too low, then duplicate requests from the NAS -# MAY NOT be detected, and will instead be handled as seperate requests. -# -# If this value is set too high, then the server will cache too many -# requests, and some new requests may get blocked. (See 'max_requests'.) -# -# Useful range of values: 2 to 10 -# -cleanup_delay = 5 - -# max_requests: The maximum number of requests which the server keeps -# track of. This should be 256 multiplied by the number of clients. -# e.g. With 4 clients, this number should be 1024. -# -# If this number is too low, then when the server becomes busy, -# it will not respond to any new requests, until the 'cleanup_delay' -# time has passed, and it has removed the old requests. -# -# If this number is set too high, then the server will use a bit more -# memory for no real benefit. -# -# If you aren't sure what it should be set to, it's better to set it -# too high than too low. Setting it to 1000 per client is probably -# the highest it should be. -# -# Useful range of values: 256 to infinity -# -max_requests = 1024 - -# bind_address: Make the server listen on a particular IP address, and -# send replies out from that address. This directive is most useful -# for machines with multiple IP addresses on one interface. -# -# It can either contain "*", or an IP address, or a fully qualified -# Internet domain name. The default is "*" -# -# As of 1.0, you can also use the "listen" directive. See below for -# more information. -# -bind_address = * - -# port: Allows you to bind FreeRADIUS to a specific port. -# -# The default port that most NAS boxes use is 1645, which is historical. -# RFC 2138 defines 1812 to be the new port. Many new servers and -# NAS boxes use 1812, which can create interoperability problems. -# -# The port is defined here to be 0 so that the server will pick up -# the machine's local configuration for the radius port, as defined -# in /etc/services. -# -# If you want to use the default RADIUS port as defined on your server, -# (usually through 'grep radius /etc/services') set this to 0 (zero). -# -# A port given on the command-line via '-p' over-rides this one. -# -# As of 1.0, you can also use the "listen" directive. See below for -# more information. -# -port = 0 - -# -# By default, the server uses "bind_address" to listen to all IP's -# on a machine, or just one IP. The "port" configuration is used -# to select the authentication port used when listening on those -# addresses. -# -# If you want the server to listen on additional addresses, you can -# use the "listen" section. A sample section (commented out) is included -# below. This "listen" section duplicates the functionality of the -# "bind_address" and "port" configuration entries, but it only listens -# for authentication packets. -# -# If you comment out the "bind_address" and "port" configuration entries, -# then it becomes possible to make the server accept only accounting, -# or authentication packets. Previously, it always listened for both -# types of packets, and it was impossible to make it listen for only -# one type of packet. -# -#listen { - # IP address on which to listen. - # Allowed values are: - # dotted quad (1.2.3.4) - # hostname (radius.example.com) - # wildcard (*) -# ipaddr = * - - # Port on which to listen. - # Allowed values are: - # integer port number (1812) - # 0 means "use /etc/services for the proper port" -# port = 0 - - # Type of packets to listen for. - # Allowed values are: - # auth listen for authentication packets - # acct listen for accounting packets - # -# type = auth -#} - - -# hostname_lookups: Log the names of clients or just their IP addresses -# e.g., www.freeradius.org (on) or 206.47.27.232 (off). -# -# The default is 'off' because it would be overall better for the net -# if people had to knowingly turn this feature on, since enabling it -# means that each client request will result in AT LEAST one lookup -# request to the nameserver. Enabling hostname_lookups will also -# mean that your server may stop randomly for 30 seconds from time -# to time, if the DNS requests take too long. -# -# Turning hostname lookups off also means that the server won't block -# for 30 seconds, if it sees an IP address which has no name associated -# with it. -# -# allowed values: {no, yes} -# -hostname_lookups = no - -# Core dumps are a bad thing. This should only be set to 'yes' -# if you're debugging a problem with the server. -# -# allowed values: {no, yes} -# -allow_core_dumps = no - -# Regular expressions -# -# These items are set at configure time. If they're set to "yes", -# then setting them to "no" turns off regular expression support. -# -# If they're set to "no" at configure time, then setting them to "yes" -# WILL NOT WORK. It will give you an error. -# -regular_expressions = yes -extended_expressions = yes - -# Log the full User-Name attribute, as it was found in the request. -# -# allowed values: {no, yes} -# -log_stripped_names = no - -# Log authentication requests to the log file. -# -# allowed values: {no, yes} -# -log_auth = no - -# Log passwords with the authentication requests. -# log_auth_badpass - logs password if it's rejected -# log_auth_goodpass - logs password if it's correct -# -# allowed values: {no, yes} -# -log_auth_badpass = no -log_auth_goodpass = no - -# usercollide: Turn "username collision" code on and off. See the -# "doc/duplicate-users" file -# -# WARNING -# !!!!!!! Setting this to "yes" may result in the server behaving -# !!!!!!! strangely. The "username collision" code will ONLY work -# !!!!!!! with clear-text passwords. Even then, it may not do what -# !!!!!!! you want, or what you expect. -# !!!!!!! -# !!!!!!! We STRONGLY RECOMMEND that you do not use this feature, -# !!!!!!! and that you find another way of acheiving the same goal. -# !!!!!!! -# !!!!!!! e,g. module fail-over. See 'doc/configurable_failover' -# WARNING -# -usercollide = no - -# lower_user / lower_pass: -# Lower case the username/password "before" or "after" -# attempting to authenticate. -# -# If "before", the server will first modify the request and then try -# to auth the user. If "after", the server will first auth using the -# values provided by the user. If that fails it will reprocess the -# request after modifying it as you specify below. -# -# This is as close as we can get to case insensitivity. It is the -# admin's job to ensure that the username on the auth db side is -# *also* lowercase to make this work -# -# Default is 'no' (don't lowercase values) -# Valid values = "before" / "after" / "no" -# -lower_user = no -lower_pass = no - -# nospace_user / nospace_pass: -# -# Some users like to enter spaces in their username or password -# incorrectly. To save yourself the tech support call, you can -# eliminate those spaces here: -# -# Default is 'no' (don't remove spaces) -# Valid values = "before" / "after" / "no" (explanation above) -# -nospace_user = no -nospace_pass = no - -# The program to execute to do concurrency checks. -checkrad = ${sbindir}/checkrad - -# SECURITY CONFIGURATION -# -# There may be multiple methods of attacking on the server. This -# section holds the configuration items which minimize the impact -# of those attacks -# -security { - # - # max_attributes: The maximum number of attributes - # permitted in a RADIUS packet. Packets which have MORE - # than this number of attributes in them will be dropped. - # - # If this number is set too low, then no RADIUS packets - # will be accepted. - # - # If this number is set too high, then an attacker may be - # able to send a small number of packets which will cause - # the server to use all available memory on the machine. - # - # Setting this number to 0 means "allow any number of attributes" - max_attributes = 200 - - # - # reject_delay: When sending an Access-Reject, it can be - # delayed for a few seconds. This may help slow down a DoS - # attack. It also helps to slow down people trying to brute-force - # crack a users password. - # - # Setting this number to 0 means "send rejects immediately" - # - # If this number is set higher than 'cleanup_delay', then the - # rejects will be sent at 'cleanup_delay' time, when the request - # is deleted from the internal cache of requests. - # - # Useful ranges: 1 to 5 - reject_delay = 1 - - # - # status_server: Whether or not the server will respond - # to Status-Server requests. - # - # Normally this should be set to "no", because they're useless. - # See: http://www.freeradius.org/rfc/rfc2865.html#Keep-Alives - # - # However, certain NAS boxes may require them. - # - # When sent a Status-Server message, the server responds with - # an Access-Accept packet, containing a Reply-Message attribute, - # which is a string describing how long the server has been - # running. - # - status_server = no -} - -# PROXY CONFIGURATION -# -# proxy_requests: Turns proxying of RADIUS requests on or off. -# -# The server has proxying turned on by default. If your system is NOT -# set up to proxy requests to another server, then you can turn proxying -# off here. This will save a small amount of resources on the server. -# -# If you have proxying turned off, and your configuration files say -# to proxy a request, then an error message will be logged. -# -# To disable proxying, change the "yes" to "no", and comment the -# $INCLUDE line. -# -# allowed values: {no, yes} -# -proxy_requests = yes -$INCLUDE ${confdir}/proxy.conf - - -# CLIENTS CONFIGURATION -# -# Client configuration is defined in "clients.conf". -# - -# The 'clients.conf' file contains all of the information from the old -# 'clients' and 'naslist' configuration files. We recommend that you -# do NOT use 'client's or 'naslist', although they are still -# supported. -# -# Anything listed in 'clients.conf' will take precedence over the -# information from the old-style configuration files. -# -$INCLUDE ${confdir}/clients.conf - - -# SNMP CONFIGURATION -# -# Snmp configuration is only valid if SNMP support was enabled -# at compile time. -# -# To enable SNMP querying of the server, set the value of the -# 'snmp' attribute to 'yes' -# -snmp = no -$INCLUDE ${confdir}/snmp.conf - - -# THREAD POOL CONFIGURATION -# -# The thread pool is a long-lived group of threads which -# take turns (round-robin) handling any incoming requests. -# -# You probably want to have a few spare threads around, -# so that high-load situations can be handled immediately. If you -# don't have any spare threads, then the request handling will -# be delayed while a new thread is created, and added to the pool. -# -# You probably don't want too many spare threads around, -# otherwise they'll be sitting there taking up resources, and -# not doing anything productive. -# -# The numbers given below should be adequate for most situations. -# -thread pool { - # Number of servers to start initially --- should be a reasonable - # ballpark figure. - start_servers = 5 - - # Limit on the total number of servers running. - # - # If this limit is ever reached, clients will be LOCKED OUT, so it - # should NOT BE SET TOO LOW. It is intended mainly as a brake to - # keep a runaway server from taking the system with it as it spirals - # down... - # - # You may find that the server is regularly reaching the - # 'max_servers' number of threads, and that increasing - # 'max_servers' doesn't seem to make much difference. - # - # If this is the case, then the problem is MOST LIKELY that - # your back-end databases are taking too long to respond, and - # are preventing the server from responding in a timely manner. - # - # The solution is NOT do keep increasing the 'max_servers' - # value, but instead to fix the underlying cause of the - # problem: slow database, or 'hostname_lookups=yes'. - # - # For more information, see 'max_request_time', above. - # - max_servers = 32 - - # Server-pool size regulation. Rather than making you guess - # how many servers you need, FreeRADIUS dynamically adapts to - # the load it sees, that is, it tries to maintain enough - # servers to handle the current load, plus a few spare - # servers to handle transient load spikes. - # - # It does this by periodically checking how many servers are - # waiting for a request. If there are fewer than - # min_spare_servers, it creates a new spare. If there are - # more than max_spare_servers, some of the spares die off. - # The default values are probably OK for most sites. - # - min_spare_servers = 3 - max_spare_servers = 10 - - # There may be memory leaks or resource allocation problems with - # the server. If so, set this value to 300 or so, so that the - # resources will be cleaned up periodically. - # - # This should only be necessary if there are serious bugs in the - # server which have not yet been fixed. - # - # '0' is a special value meaning 'infinity', or 'the servers never - # exit' - max_requests_per_server = 0 -} - -# MODULE CONFIGURATION -# -# The names and configuration of each module is located in this section. -# -# After the modules are defined here, they may be referred to by name, -# in other sections of this configuration file. -# -modules { - # - # Each module has a configuration as follows: - # - # name [ instance ] { - # config_item = value - # ... - # } - # - # The 'name' is used to load the 'rlm_name' library - # which implements the functionality of the module. - # - # The 'instance' is optional. To have two different instances - # of a module, it first must be referred to by 'name'. - # The different copies of the module are then created by - # inventing two 'instance' names, e.g. 'instance1' and 'instance2' - # - # The instance names can then be used in later configuration - # INSTEAD of the original 'name'. See the 'radutmp' configuration - # below for an example. - # - - # PAP module to authenticate users based on their stored password - # - # As of 1.1.4, the "encryption_scheme" configuration should - # no longer be used. For backwards compatibility, it will still - # work as before, but we recommend that it is not used. - # - # The replacement is "auto_header = yes". - # For backwards compatibility, the default is "auto_header = no", - # but we recommend reviewing your use of the PAP module, based - # on the documentation in "man rlm_pap". - # - # The new capability in this module makes it MUCH easier to - # configure the server for multiple crypt/hash schemes, AND - # it supports more methods than before. Please read "man rlm_pap" - # for more detailed documentation. - # - pap { - auto_header = yes - } - - # CHAP module - # - # To authenticate requests containing a CHAP-Password attribute. - # - chap { - authtype = CHAP - } - - # Pluggable Authentication Modules - # - # For Linux, see: - # http://www.kernel.org/pub/linux/libs/pam/index.html - # - # WARNING: On many systems, the system PAM libraries have - # memory leaks! We STRONGLY SUGGEST that you do not - # use PAM for authentication, due to those memory leaks. - # - pam { - # - # The name to use for PAM authentication. - # PAM looks in /etc/pam.d/${pam_auth_name} - # for it's configuration. See 'redhat/radiusd-pam' - # for a sample PAM configuration file. - # - # Note that any Pam-Auth attribute set in the 'authorize' - # section will over-ride this one. - # - pam_auth = radiusd - } - - # Unix /etc/passwd style authentication - # - unix { - # - # Cache /etc/passwd, /etc/shadow, and /etc/group - # - # The default is to NOT cache them. - # - # For FreeBSD and NetBSD, you do NOT want to enable - # the cache, as it's password lookups are done via a - # database, so set this value to 'no'. - # - # Some systems (e.g. RedHat Linux with pam_pwbd) can - # take *seconds* to check a password, when th passwd - # file containing 1000's of entries. For those systems, - # you should set the cache value to 'yes', and set - # the locations of the 'passwd', 'shadow', and 'group' - # files, below. - # - # allowed values: {no, yes} - cache = no - - # Reload the cache every 600 seconds (10mins). 0 to disable. - cache_reload = 600 - - # - # Define the locations of the normal passwd, shadow, and - # group files. - # - # 'shadow' is commented out by default, because not all - # systems have shadow passwords. - # - # To force the module to use the system password functions, - # instead of reading the files, leave the following entries - # commented out. - # - # This is required for some systems, like FreeBSD, - # and Mac OSX. - # - # passwd = /etc/passwd - shadow = /etc/shadow - # group = /etc/group - - # - # The location of the "wtmp" file. - # This should be moved to it's own module soon. - # - # The only use for 'radlast'. If you don't use - # 'radlast', then you can comment out this item. - # - radwtmp = ${logdir}/radwtmp - } - - # Extensible Authentication Protocol - # - # For all EAP related authentications. - # Now in another file, because it is very large. - # -$INCLUDE ${confdir}/eap.conf - - # Microsoft CHAP authentication - # - # This module supports MS-CHAP and MS-CHAPv2 authentication. - # It also enforces the SMB-Account-Ctrl attribute. - # - mschap { - # - # As of 0.9, the mschap module does NOT support - # reading from /etc/smbpasswd. - # - # If you are using /etc/smbpasswd, see the 'passwd' - # module for an example of how to use /etc/smbpasswd - - # if use_mppe is not set to no mschap will - # add MS-CHAP-MPPE-Keys for MS-CHAPv1 and - # MS-MPPE-Recv-Key/MS-MPPE-Send-Key for MS-CHAPv2 - # - #use_mppe = no - - # if mppe is enabled require_encryption makes - # encryption moderate - # - #require_encryption = yes - - # require_strong always requires 128 bit key - # encryption - # - #require_strong = yes - - # Windows sends us a username in the form of - # DOMAIN\user, but sends the challenge response - # based on only the user portion. This hack - # corrects for that incorrect behavior. - # - #with_ntdomain_hack = no - - # The module can perform authentication itself, OR - # use a Windows Domain Controller. This configuration - # directive tells the module to call the ntlm_auth - # program, which will do the authentication, and return - # the NT-Key. Note that you MUST have "winbindd" and - # "nmbd" running on the local machine for ntlm_auth - # to work. See the ntlm_auth program documentation - # for details. - # - # Be VERY careful when editing the following line! - # - #ntlm_auth = "/path/to/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" - } - - # Lightweight Directory Access Protocol (LDAP) - # - # This module definition allows you to use LDAP for - # authorization and authentication. - # - # See doc/rlm_ldap for description of configuration options - # and sample authorize{} and authenticate{} blocks - # - # However, LDAP can be used for authentication ONLY when the - # Access-Request packet contains a clear-text User-Password - # attribute. LDAP authentication will NOT work for any other - # authentication method. - # - # This means that LDAP servers don't understand EAP. If you - # force "Auth-Type = LDAP", and then send the server a - # request containing EAP authentication, then authentication - # WILL NOT WORK. - # - # The solution is to use the default configuration, which does - # work. - # - # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We - # really can't emphasize this enough. - # - ldap { - server = "ldap.your.domain" - # identity = "cn=admin,o=My Org,c=UA" - # password = mypass - basedn = "o=My Org,c=UA" - filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" - # base_filter = "(objectclass=radiusprofile)" - - # set this to 'yes' to use TLS encrypted connections - # to the LDAP database by using the StartTLS extended - # operation. - # The StartTLS operation is supposed to be used with normal - # ldap connections instead of using ldaps (port 689) connections - start_tls = no - - # tls_cacertfile = /path/to/cacert.pem - # tls_cacertdir = /path/to/ca/dir/ - # tls_certfile = /path/to/radius.crt - # tls_keyfile = /path/to/radius.key - # tls_randfile = /path/to/rnd - # tls_require_cert = "demand" - - # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA" - # profile_attribute = "radiusProfileDn" - access_attr = "dialupAccess" - - # Mapping of RADIUS dictionary attributes to LDAP - # directory attributes. - dictionary_mapping = ${raddbdir}/ldap.attrmap - - ldap_connections_number = 5 - - # - # NOTICE: The password_header directive is NOT case insensitive - # - # password_header = "{clear}" - # - # Set: - # password_attribute = nspmPassword - # - # to get the user's password from a Novell eDirectory - # backend. This will work *only if* freeRADIUS is - # configured to build with --with-edir option. - # - # - # The server can usually figure this out on its own, and pull - # the correct User-Password or NT-Password from the database. - # - # Note that NT-Passwords MUST be stored as a 32-digit hex - # string, and MUST start off with "0x", such as: - # - # 0x000102030405060708090a0b0c0d0e0f - # - # Without the leading "0x", NT-Passwords will not work. - # This goes for NT-Passwords stored in SQL, too. - # - # password_attribute = userPassword - # - # Un-comment the following to disable Novell eDirectory account - # policy check and intruder detection. This will work *only if* - # FreeRADIUS is configured to build with --with-edir option. - # - edir_account_policy_check=no - # - # groupname_attribute = cn - # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" - # groupmembership_attribute = radiusGroupName - timeout = 4 - timelimit = 3 - net_timeout = 1 - # compare_check_items = yes - # do_xlat = yes - # access_attr_used_for_allow = yes - - # - # By default, if the packet contains a User-Password, - # and no other module is configured to handle the - # authentication, the LDAP module sets itself to do - # LDAP bind for authentication. - # - # You can disable this behavior by setting the following - # configuration entry to "no". - # - # allowed values: {no, yes} - # set_auth_type = yes - } - - # passwd module allows to do authorization via any passwd-like - # file and to extract any attributes from these modules - # - # parameters are: - # filename - path to filename - # format - format for filename record. This parameters - # correlates record in the passwd file and RADIUS - # attributes. - # - # Field marked as '*' is key field. That is, the parameter - # with this name from the request is used to search for - # the record from passwd file - # Attribute marked as '=' is added to reply_itmes instead - # of default configure_itmes - # Attribute marked as '~' is added to request_items - # - # Field marked as ',' may contain a comma separated list - # of attributes. - # authtype - if record found this Auth-Type is used to authenticate - # user - # hashsize - hashtable size. If 0 or not specified records are not - # stored in memory and file is red on every request. - # allowmultiplekeys - if few records for every key are allowed - # ignorenislike - ignore NIS-related records - # delimiter - symbol to use as a field separator in passwd file, - # for format ':' symbol is always used. '\0', '\n' are - # not allowed - # - - # An example configuration for using /etc/smbpasswd. - # - #passwd etc_smbpasswd { - # filename = /etc/smbpasswd - # format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::" - # authtype = MS-CHAP - # hashsize = 100 - # ignorenislike = no - # allowmultiplekeys = no - #} - - # Similar configuration, for the /etc/group file. Adds a Group-Name - # attribute for every group that the user is member of. - # - #passwd etc_group { - # filename = /etc/group - # format = "=Group-Name:::*,User-Name" - # hashsize = 50 - # ignorenislike = yes - # allowmultiplekeys = yes - # delimiter = ":" - #} - - # Realm module, for proxying. - # - # You can have multiple instances of the realm module to - # support multiple realm syntaxs at the same time. The - # search order is defined by the order in the authorize and - # preacct sections. - # - # Four config options: - # format - must be 'prefix' or 'suffix' - # delimiter - must be a single character - # ignore_default - set to 'yes' or 'no' - # ignore_null - set to 'yes' or 'no' - # - # ignore_default and ignore_null can be set to 'yes' to prevent - # the module from matching against DEFAULT or NULL realms. This - # may be useful if you have have multiple instances of the - # realm module. - # - # They both default to 'no'. - # - - # 'realm/username' - # - # Using this entry, IPASS users have their realm set to "IPASS". - realm IPASS { - format = prefix - delimiter = "/" - ignore_default = no - ignore_null = no - } - - # 'username@realm' - # - realm suffix { - format = suffix - delimiter = "@" - ignore_default = no - ignore_null = no - } - - # 'username%realm' - # - realm realmpercent { - format = suffix - delimiter = "%" - ignore_default = no - ignore_null = no - } - - # - # 'domain\user' - # - realm ntdomain { - format = prefix - delimiter = "\\" - ignore_default = no - ignore_null = no - } - - # A simple value checking module - # - # It can be used to check if an attribute value in the request - # matches a (possibly multi valued) attribute in the check - # items This can be used for example for caller-id - # authentication. For the module to run, both the request - # attribute and the check items attribute must exist - # - # i.e. - # A user has an ldap entry with 2 radiusCallingStationId - # attributes with values "12345678" and "12345679". If we - # enable rlm_checkval, then any request which contains a - # Calling-Station-Id with one of those two values will be - # accepted. Requests with other values for - # Calling-Station-Id will be rejected. - # - # Regular expressions in the check attribute value are allowed - # as long as the operator is '=~' - # - checkval { - # The attribute to look for in the request - item-name = Calling-Station-Id - - # The attribute to look for in check items. Can be multi valued - check-name = Calling-Station-Id - - # The data type. Can be - # string,integer,ipaddr,date,abinary,octets - data-type = string - - # If set to yes and we dont find the item-name attribute in the - # request then we send back a reject - # DEFAULT is no - #notfound-reject = no - } - - # rewrite arbitrary packets. Useful in accounting and authorization. - # - # - # The module can also use the Rewrite-Rule attribute. If it - # is set and matches the name of the module instance, then - # that module instance will be the only one which runs. - # - # Also if new_attribute is set to yes then a new attribute - # will be created containing the value replacewith and it - # will be added to searchin (packet, reply, proxy, proxy_reply or config). - # searchfor,ignore_case and max_matches will be ignored in that case. - # - # Backreferences are supported: %{0} will contain the string the whole match - # and %{1} to %{8} will contain the contents of the 1st to the 8th parentheses - # - # If max_matches is greater than one the backreferences will correspond to the - # first match - - # - #attr_rewrite sanecallerid { - # attribute = Called-Station-Id - # may be "packet", "reply", "proxy", "proxy_reply" or "config" - # searchin = packet - # searchfor = "[+ ]" - # replacewith = "" - # ignore_case = no - # new_attribute = no - # max_matches = 10 - # ## If set to yes then the replace string will be appended to the original string - # append = no - #} - - # Preprocess the incoming RADIUS request, before handing it off - # to other modules. - # - # This module processes the 'huntgroups' and 'hints' files. - # In addition, it re-writes some weird attributes created - # by some NASes, and converts the attributes into a form which - # is a little more standard. - # - preprocess { - huntgroups = ${confdir}/huntgroups - hints = ${confdir}/hints - - # This hack changes Ascend's wierd port numberings - # to standard 0-??? port numbers so that the "+" works - # for IP address assignments. - with_ascend_hack = no - ascend_channels_per_line = 23 - - # Windows NT machines often authenticate themselves as - # NT_DOMAIN\username - # - # If this is set to 'yes', then the NT_DOMAIN portion - # of the user-name is silently discarded. - # - # This configuration entry SHOULD NOT be used. - # See the "realms" module for a better way to handle - # NT domains. - with_ntdomain_hack = no - - # Specialix Jetstream 8500 24 port access server. - # - # If the user name is 10 characters or longer, a "/" - # and the excess characters after the 10th are - # appended to the user name. - # - # If you're not running that NAS, you don't need - # this hack. - with_specialix_jetstream_hack = no - - # Cisco (and Quintum in Cisco mode) sends it's VSA attributes - # with the attribute name *again* in the string, like: - # - # H323-Attribute = "h323-attribute=value". - # - # If this configuration item is set to 'yes', then - # the redundant data in the the attribute text is stripped - # out. The result is: - # - # H323-Attribute = "value" - # - # If you're not running a Cisco or Quintum NAS, you don't - # need this hack. - with_cisco_vsa_hack = no - } - - # Livingston-style 'users' file - # - files { - usersfile = ${confdir}/users - acctusersfile = ${confdir}/acct_users - preproxy_usersfile = ${confdir}/preproxy_users - - # If you want to use the old Cistron 'users' file - # with FreeRADIUS, you should change the next line - # to 'compat = cistron'. You can the copy your 'users' - # file from Cistron. - compat = no - } - - # Write a detailed log of all accounting records received. - # - detail { - # Note that we do NOT use NAS-IP-Address here, as - # that attribute MAY BE from the originating NAS, and - # NOT from the proxy which actually sent us the - # request. The Client-IP-Address attribute is ALWAYS - # the address of the client which sent us the - # request. - # - # The following line creates a new detail file for - # every radius client (by IP address or hostname). - # In addition, a new detail file is created every - # day, so that the detail file doesn't have to go - # through a 'log rotation' - # - # If your detail files are large, you may also want - # to add a ':%H' (see doc/variables.txt) to the end - # of it, to create a new detail file every hour, e.g.: - # - # ..../detail-%Y%m%d:%H - # - # This will create a new detail file for every hour. - # - detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d - - # - # The Unix-style permissions on the 'detail' file. - # - # The detail file often contains secret or private - # information about users. So by keeping the file - # permissions restrictive, we can prevent unwanted - # people from seeing that information. - detailperm = 0600 - - # - # Certain attributes such as User-Password may be - # "sensitive", so they should not be printed in the - # detail file. This section lists the attributes - # that should be suppressed. - # - # The attributes should be listed one to a line. - # - #suppress { - # User-Password - #} - } - - # - # Many people want to log authentication requests. - # Rather than modifying the server core to print out more - # messages, we can use a different instance of the 'detail' - # module, to log the authentication requests to a file. - # - # You will also need to un-comment the 'auth_log' line - # in the 'authorize' section, below. - # - # detail auth_log { - # detailfile = ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - # detailperm = 0600 - # } - - # - # This module logs authentication reply packets sent - # to a NAS. Both Access-Accept and Access-Reject packets - # are logged. - # - # You will also need to un-comment the 'reply_log' line - # in the 'post-auth' section, below. - # - # detail reply_log { - # detailfile = ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - # detailperm = 0600 - # } - - # - # This module logs packets proxied to a home server. - # - # You will also need to un-comment the 'pre_proxy_log' line - # in the 'pre-proxy' section, below. - # - # detail pre_proxy_log { - # detailfile = ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - # detailperm = 0600 - # } - - # - # This module logs response packets from a home server. - # - # You will also need to un-comment the 'post_proxy_log' line - # in the 'post-proxy' section, below. - # - # detail post_proxy_log { - # detailfile = ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - # detailperm = 0600 - # } - - # - # The rlm_sql_log module appends the SQL queries in a log - # file which is read later by the radsqlrelay program. - # - # This module only performs the dynamic expansion of the - # variables found in the SQL statements. No operation is - # executed on the database server. (this could be done - # later by an external program) That means the module is - # useful only with non-"SELECT" statements. - # - # See rlm_sql_log(5) manpage. - # -# sql_log { -# path = ${radacctdir}/sql-relay -# acct_table = "radacct" -# postauth_table = "radpostauth" -# -# Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '%S', '0', '0', '');" -# Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \ -# '%{Acct-Terminate-Cause}');" -# Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');" -# -# Post-Auth = "INSERT INTO ${postauth_table} \ -# (user, pass, reply, date) VALUES \ -# ('%{User-Name}', '%{User-Password:-Chap-Password}', \ -# '%{reply:Packet-Type}', '%S');" -# } - - # - # Create a unique accounting session Id. Many NASes re-use - # or repeat values for Acct-Session-Id, causing no end of - # confusion. - # - # This module will add a (probably) unique session id - # to an accounting packet based on the attributes listed - # below found in the packet. See doc/rlm_acct_unique for - # more information. - # - acct_unique { - key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" - } - - - # Include another file that has the SQL-related configuration. - # This is another file only because it tends to be big. - # - # The following configuration file is for use with MySQL. - # - # For Postgresql, use: ${confdir}/postgresql.conf - # For MS-SQL, use: ${confdir}/mssql.conf - # For Oracle, use: ${confdir}/oraclesql.conf - # - $INCLUDE ${confdir}/sql.conf - - - # For Cisco VoIP specific accounting with Postgresql, - # use: ${confdir}/pgsql-voip.conf - # - # You will also need the sql schema from: - # src/billing/cisco_h323_db_schema-postgres.sql - # Note: This config can be use AS WELL AS the standard sql - # config if you need SQL based Auth - - - # Write a 'utmp' style file, of which users are currently - # logged in, and where they've logged in from. - # - # This file is used mainly for Simultaneous-Use checking, - # and also 'radwho', to see who's currently logged in. - # - radutmp { - # Where the file is stored. It's not a log file, - # so it doesn't need rotating. - # - filename = ${logdir}/radutmp - - # The field in the packet to key on for the - # 'user' name, If you have other fields which you want - # to use to key on to control Simultaneous-Use, - # then you can use them here. - # - # Note, however, that the size of the field in the - # 'utmp' data structure is small, around 32 - # characters, so that will limit the possible choices - # of keys. - # - # You may want instead: %{Stripped-User-Name:-%{User-Name}} - username = %{User-Name} - - - # Whether or not we want to treat "user" the same - # as "USER", or "User". Some systems have problems - # with case sensitivity, so this should be set to - # 'no' to enable the comparisons of the key attribute - # to be case insensitive. - # - case_sensitive = yes - - # Accounting information may be lost, so the user MAY - # have logged off of the NAS, but we haven't noticed. - # If so, we can verify this information with the NAS, - # - # If we want to believe the 'utmp' file, then this - # configuration entry can be set to 'no'. - # - check_with_nas = yes - - # Set the file permissions, as the contents of this file - # are usually private. - perm = 0600 - - callerid = "yes" - } - - # "Safe" radutmp - does not contain caller ID, so it can be - # world-readable, and radwho can work for normal users, without - # exposing any information that isn't already exposed by who(1). - # - # This is another 'instance' of the radutmp module, but it is given - # then name "sradutmp" to identify it later in the "accounting" - # section. - radutmp sradutmp { - filename = ${logdir}/sradutmp - perm = 0644 - callerid = "no" - } - - # attr_filter - filters the attributes received in replies from - # proxied servers, to make sure we send back to our RADIUS client - # only allowed attributes. - attr_filter { - attrsfile = ${confdir}/attrs - } - - # counter module: - # This module takes an attribute (count-attribute). - # It also takes a key, and creates a counter for each unique - # key. The count is incremented when accounting packets are - # received by the server. The value of the increment depends - # on the attribute type. - # If the attribute is Acct-Session-Time or of an integer type we add the - # value of the attribute. If it is anything else we increase the - # counter by one. - # - # The 'reset' parameter defines when the counters are all reset to - # zero. It can be hourly, daily, weekly, monthly or never. - # - # hourly: Reset on 00:00 of every hour - # daily: Reset on 00:00:00 every day - # weekly: Reset on 00:00:00 on sunday - # monthly: Reset on 00:00:00 of the first day of each month - # - # It can also be user defined. It should be of the form: - # num[hdwm] where: - # h: hours, d: days, w: weeks, m: months - # If the letter is ommited days will be assumed. In example: - # reset = 10h (reset every 10 hours) - # reset = 12 (reset every 12 days) - # - # - # The check-name attribute defines an attribute which will be - # registered by the counter module and can be used to set the - # maximum allowed value for the counter after which the user - # is rejected. - # Something like: - # - # DEFAULT Max-Daily-Session := 36000 - # Fall-Through = 1 - # - # You should add the counter module in the instantiate - # section so that it registers check-name before the files - # module reads the users file. - # - # If check-name is set and the user is to be rejected then we - # send back a Reply-Message and we log a Failure-Message in - # the radius.log - # If the count attribute is Acct-Session-Time then on each login - # we send back the remaining online time as a Session-Timeout attribute - # - # The counter-name can also be used instead of using the check-name - # like below: - # - # DEFAULT Daily-Session-Time > 3600, Auth-Type = Reject - # Reply-Message = "You've used up more than one hour today" - # - # The allowed-servicetype attribute can be used to only take - # into account specific sessions. For example if a user first - # logs in through a login menu and then selects ppp there will - # be two sessions. One for Login-User and one for Framed-User - # service type. We only need to take into account the second one. - # - # The module should be added in the instantiate, authorize and - # accounting sections. Make sure that in the authorize - # section it comes after any module which sets the - # 'check-name' attribute. - # - counter daily { - filename = ${raddbdir}/db.daily - key = User-Name - count-attribute = Acct-Session-Time - reset = daily - counter-name = Daily-Session-Time - check-name = Max-Daily-Session - allowed-servicetype = Framed-User - cache-size = 5000 - } - - # - # This module is an SQL enabled version of the counter module. - # - # Rather than maintaining seperate (GDBM) databases of - # accounting info for each counter, this module uses the data - # stored in the raddacct table by the sql modules. This - # module NEVER does any database INSERTs or UPDATEs. It is - # totally dependent on the SQL module to process Accounting - # packets. - # - # The 'sqlmod_inst' parameter holds the instance of the sql - # module to use when querying the SQL database. Normally it - # is just "sql". If you define more and one SQL module - # instance (usually for failover situations), you can - # specify which module has access to the Accounting Data - # (radacct table). - # - # The 'reset' parameter defines when the counters are all - # reset to zero. It can be hourly, daily, weekly, monthly or - # never. It can also be user defined. It should be of the - # form: - # num[hdwm] where: - # h: hours, d: days, w: weeks, m: months - # If the letter is ommited days will be assumed. In example: - # reset = 10h (reset every 10 hours) - # reset = 12 (reset every 12 days) - # - # The 'key' parameter specifies the unique identifier for the - # counter records (usually 'User-Name'). - # - # The 'query' parameter specifies the SQL query used to get - # the current Counter value from the database. There are 3 - # parameters that can be used in the query: - # %k 'key' parameter - # %b unix time value of beginning of reset period - # %e unix time value of end of reset period - # - # The 'check-name' parameter is the name of the 'check' - # attribute to use to access the counter in the 'users' file - # or SQL radcheck or radcheckgroup tables. - # - # The 'reply-name' parameter is the name the the attribute - # which holds the time remaining for the user. This is normally - # Session-Timeout, which makes the NAS disconnect the user - # once the session time is up. - # - # DEFAULT Max-Daily-Session > 3600, Auth-Type = Reject - # Reply-Message = "You've used up more than one hour today" - # - sqlcounter dailycounter { - counter-name = Daily-Session-Time - check-name = Max-Daily-Session - reply-name = Session-Timeout - sqlmod-inst = sql - key = User-Name - reset = daily - - # This query properly handles calls that span from the - # previous reset period into the current period but - # involves more work for the SQL server than those - # below - # For mysql: - query = "SELECT SUM(AcctSessionTime - \ - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ - FROM radacct WHERE UserName='%{%k}' AND \ - UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" - - # For postgresql: -# query = "SELECT SUM(AcctSessionTime - \ -# GREATER((%b - AcctStartTime::ABSTIME::INT4), 0)) \ -# FROM radacct WHERE UserName='%{%k}' AND \ -# AcctStartTime::ABSTIME::INT4 + AcctSessionTime > '%b'" - - # This query ignores calls that started in a previous - # reset period and continue into into this one. But it - # is a little easier on the SQL server - # For mysql: -# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \ -# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')" - - # For postgresql: -# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \ -# UserName='%{%k}' AND AND AcctStartTime::ABSTIME::INT4 > '%b'" - - # This query is the same as above, but demonstrates an - # additional counter parameter '%e' which is the - # timestamp for the end of the period - # For mysql: -# query = "SELECT SUM(AcctSessionTime) FROM radacct \ -# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \ -# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')" - - # For postgresql: -# query = "SELECT SUM(AcctSessionTime) FROM radacct \ -# WHERE UserName='%{%k}' AND AcctStartTime::ABSTIME::INT4 \ -# BETWEEN '%b' AND '%e'" - } - - sqlcounter monthlycounter { - counter-name = Monthly-Session-Time - check-name = Max-Monthly-Session - reply-name = Session-Timeout - sqlmod-inst = sql - key = User-Name - reset = monthly - - # This query properly handles calls that span from the - # previous reset period into the current period but - # involves more work for the SQL server than those - # below - # The same notes above about the differences between mysql - # versus postgres queries apply here. - query = "SELECT SUM(AcctSessionTime - \ - GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ - FROM radacct WHERE UserName='%{%k}' AND \ - UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" - - # This query ignores calls that started in a previous - # reset period and continue into into this one. But it - # is a little easier on the SQL server -# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \ -# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')" - - # This query is the same as above, but demonstrates an - # additional counter parameter '%e' which is the - # timestamp for the end of the period -# query = "SELECT SUM(AcctSessionTime) FROM radacct \ -# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \ -# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')" - } - - # - # The "always" module is here for debugging purposes. Each - # instance simply returns the same result, always, without - # doing anything. - always fail { - rcode = fail - } - always reject { - rcode = reject - } - always ok { - rcode = ok - simulcount = 0 - mpp = no - } - - # - # The 'expression' module currently has no configuration. - # - # This module is useful only for 'xlat'. To use it, - # put 'exec' into the 'instantiate' section. You can then - # do dynamic translation of attributes like: - # - # Attribute-Name = `%{expr:2 + 3 + %{exec: uid -u}}` - # - # The value of the attribute will be replaced with the output - # of the program which is executed. Due to RADIUS protocol - # limitations, any output over 253 bytes will be ignored. - expr { - } - - # - # The 'digest' module currently has no configuration. - # - # "Digest" authentication against a Cisco SIP server. - # See 'doc/rfc/draft-sterman-aaa-sip-00.txt' for details - # on performing digest authentication for Cisco SIP servers. - # - digest { - } - - # - # Execute external programs - # - # This module is useful only for 'xlat'. To use it, - # put 'exec' into the 'instantiate' section. You can then - # do dynamic translation of attributes like: - # - # Attribute-Name = `%{exec:/path/to/program args}` - # - # The value of the attribute will be replaced with the output - # of the program which is executed. Due to RADIUS protocol - # limitations, any output over 253 bytes will be ignored. - # - # The RADIUS attributes from the user request will be placed - # into environment variables of the executed program, as - # described in 'doc/variables.txt' - # - exec { - wait = yes - input_pairs = request - } - - # - # This is a more general example of the execute module. - # - # This one is called "echo". - # - # Attribute-Name = `%{echo:/path/to/program args}` - # - # If you wish to execute an external program in more than - # one section (e.g. 'authorize', 'pre_proxy', etc), then it - # is probably best to define a different instance of the - # 'exec' module for every section. - # - exec echo { - # - # Wait for the program to finish. - # - # If we do NOT wait, then the program is "fire and - # forget", and any output attributes from it are ignored. - # - # If we are looking for the program to output - # attributes, and want to add those attributes to the - # request, then we MUST wait for the program to - # finish, and therefore set 'wait=yes' - # - # allowed values: {no, yes} - wait = yes - - # - # The name of the program to execute, and it's - # arguments. Dynamic translation is done on this - # field, so things like the following example will - # work. - # - program = "/bin/echo %{User-Name}" - - # - # The attributes which are placed into the - # environment variables for the program. - # - # Allowed values are: - # - # request attributes from the request - # config attributes from the configuration items list - # reply attributes from the reply - # proxy-request attributes from the proxy request - # proxy-reply attributes from the proxy reply - # - # Note that some attributes may not exist at some - # stages. e.g. There may be no proxy-reply - # attributes if this module is used in the - # 'authorize' section. - # - input_pairs = request - - # - # Where to place the output attributes (if any) from - # the executed program. The values allowed, and the - # restrictions as to availability, are the same as - # for the input_pairs. - # - output_pairs = reply - - # - # When to execute the program. If the packet - # type does NOT match what's listed here, then - # the module does NOT execute the program. - # - # For a list of allowed packet types, see - # the 'dictionary' file, and look for VALUEs - # of the Packet-Type attribute. - # - # By default, the module executes on ANY packet. - # Un-comment out the following line to tell the - # module to execute only if an Access-Accept is - # being sent to the NAS. - # - #packet_type = Access-Accept - } - - # Do server side ip pool management. Should be added in post-auth and - # accounting sections. - # - # The module also requires the existance of the Pool-Name - # attribute. That way the administrator can add the Pool-Name - # attribute in the user profiles and use different pools - # for different users. The Pool-Name attribute is a *check* item not - # a reply item. - # - # Example: - # radiusd.conf: ippool students { [...] } - # users file : DEFAULT Group == students, Pool-Name := "students" - # - # ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST ********* - # ********* THEN ERASE THE DB FILES ********* - # - ippool main_pool { - - # range-start,range-stop: The start and end ip - # addresses for the ip pool - range-start = 192.168.1.1 - range-stop = 192.168.3.254 - - # netmask: The network mask used for the ip's - netmask = 255.255.255.0 - - # cache-size: The gdbm cache size for the db - # files. Should be equal to the number of ip's - # available in the ip pool - cache-size = 800 - - # session-db: The main db file used to allocate ip's to clients - session-db = ${raddbdir}/db.ippool - - # ip-index: Helper db index file used in multilink - ip-index = ${raddbdir}/db.ipindex - - # override: Will this ippool override a Framed-IP-Address already set - override = no - - # maximum-timeout: If not zero specifies the maximum time in seconds an - # entry may be active. Default: 0 - maximum-timeout = 0 - } - - # $INCLUDE ${confdir}/sqlippool.conf - # $INCLUDE ${confdir}/postgresqlippool.conf - - # OTP token support. Not included by default. - # $INCLUDE ${confdir}/otp.conf - -} - -# Instantiation -# -# This section orders the loading of the modules. Modules -# listed here will get loaded BEFORE the later sections like -# authorize, authenticate, etc. get examined. -# -# This section is not strictly needed. When a section like -# authorize refers to a module, it's automatically loaded and -# initialized. However, some modules may not be listed in any -# of the following sections, so they can be listed here. -# -# Also, listing modules here ensures that you have control over -# the order in which they are initalized. If one module needs -# something defined by another module, you can list them in order -# here, and ensure that the configuration will be OK. -# -instantiate { - # - # Allows the execution of external scripts. - # The entire command line (and output) must fit into 253 bytes. - # - # e.g. Framed-Pool = `%{exec:/bin/echo foo}` - exec - - # - # The expression module doesn't do authorization, - # authentication, or accounting. It only does dynamic - # translation, of the form: - # - # Session-Timeout = `%{expr:2 + 3}` - # - # So the module needs to be instantiated, but CANNOT be - # listed in any other section. See 'doc/rlm_expr' for - # more information. - # - expr - - # - # We add the counter module here so that it registers - # the check-name attribute before any module which sets - # it -# daily -} - -# Authorization. First preprocess (hints and huntgroups files), -# then realms, and finally look in the "users" file. -# -# The order of the realm modules will determine the order that -# we try to find a matching realm. -# -# Make *sure* that 'preprocess' comes before any realm if you -# need to setup hints for the remote radius server -authorize { - # - # The preprocess module takes care of sanitizing some bizarre - # attributes in the request, and turning them into attributes - # which are more standard. - # - # It takes care of processing the 'raddb/hints' and the - # 'raddb/huntgroups' files. - # - # It also adds the %{Client-IP-Address} attribute to the request. - preprocess - - # - # If you want to have a log of authentication requests, - # un-comment the following line, and the 'detail auth_log' - # section, above. -# auth_log - -# attr_filter - - # - # The chap module will set 'Auth-Type := CHAP' if we are - # handling a CHAP request and Auth-Type has not already been set - chap - - # - # If the users are logging in with an MS-CHAP-Challenge - # attribute for authentication, the mschap module will find - # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP' - # to the request, which will cause the server to then use - # the mschap module for authentication. - mschap - - # - # If you have a Cisco SIP server authenticating against - # FreeRADIUS, uncomment the following line, and the 'digest' - # line in the 'authenticate' section. -# digest - - # - # Look for IPASS style 'realm/', and if not found, look for - # '@realm', and decide whether or not to proxy, based on - # that. -# IPASS - - # - # If you are using multiple kinds of realms, you probably - # want to set "ignore_null = yes" for all of them. - # Otherwise, when the first style of realm doesn't match, - # the other styles won't be checked. - # - suffix -# ntdomain - - # - # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP - # authentication. - # - # It also sets the EAP-Type attribute in the request - # attribute list to the EAP type from the packet. - eap - - # - # Read the 'users' file - files - - # - # Look in an SQL database. The schema of the database - # is meant to mirror the "users" file. - # - # See "Authorization Queries" in sql.conf -# sql - - # - # If you are using /etc/smbpasswd, and are also doing - # mschap authentication, the un-comment this line, and - # configure the 'etc_smbpasswd' module, above. -# etc_smbpasswd - - # - # The ldap module will set Auth-Type to LDAP if it has not - # already been set -# ldap - - # - # Enforce daily limits on time spent logged in. -# daily - - # - # Use the checkval module -# checkval - - # - # As of 1.1.4, you should list "pap" last in this section. - # See "man rlm_pap" for more information. - pap -} - - -# Authentication. -# -# -# This section lists which modules are available for authentication. -# Note that it does NOT mean 'try each module in order'. It means -# that a module from the 'authorize' section adds a configuration -# attribute 'Auth-Type := FOO'. That authentication type is then -# used to pick the apropriate module from the list below. -# - -# In general, you SHOULD NOT set the Auth-Type attribute. The server -# will figure it out on its own, and will do the right thing. The -# most common side effect of erroneously setting the Auth-Type -# attribute is that one authentication method will work, but the -# others will not. -# -# The common reasons to set the Auth-Type attribute by hand -# is to either forcibly reject the user, or forcibly accept him. -# -authenticate { - # - # PAP authentication, when a back-end database listed - # in the 'authorize' section supplies a password. The - # password can be clear-text, or encrypted. - Auth-Type PAP { - pap - } - - # - # Most people want CHAP authentication - # A back-end database listed in the 'authorize' section - # MUST supply a CLEAR TEXT password. Encrypted passwords - # won't work. - Auth-Type CHAP { - chap - } - - # - # MSCHAP authentication. - Auth-Type MS-CHAP { - mschap - } - - # - # If you have a Cisco SIP server authenticating against - # FreeRADIUS, uncomment the following line, and the 'digest' - # line in the 'authorize' section. -# digest - - # - # Pluggable Authentication Modules. -# pam - - # - # See 'man getpwent' for information on how the 'unix' - # module checks the users password. Note that packets - # containing CHAP-Password attributes CANNOT be authenticated - # against /etc/passwd! See the FAQ for details. - # - unix - - # Uncomment it if you want to use ldap for authentication - # - # Note that this means "check plain-text password against - # the ldap database", which means that EAP won't work, - # as it does not supply a plain-text password. -# Auth-Type LDAP { -# ldap -# } - - # - # Allow EAP authentication. - eap -} - - -# -# Pre-accounting. Decide which accounting type to use. -# -preacct { - preprocess - - # - # Ensure that we have a semi-unique identifier for every - # request, and many NAS boxes are broken. - acct_unique - - # - # Look for IPASS-style 'realm/', and if not found, look for - # '@realm', and decide whether or not to proxy, based on - # that. - # - # Accounting requests are generally proxied to the same - # home server as authentication requests. -# IPASS - suffix -# ntdomain - - # - # Read the 'acct_users' file - files -} - -# -# Accounting. Log the accounting data. -# -accounting { - # - # Create a 'detail'ed log of the packets. - # Note that accounting requests which are proxied - # are also logged in the detail file. - detail -# daily - - # Update the wtmp file - # - # If you don't use "radlast", you can delete this line. - unix - - # - # For Simultaneous-Use tracking. - # - # Due to packet losses in the network, the data here - # may be incorrect. There is little we can do about it. - radutmp -# sradutmp - - # Return an address to the IP Pool when we see a stop record. -# main_pool -# sqlippool - - # - # Log traffic to an SQL database. - # - # See "Accounting queries" in sql.conf -# sql - - # - # Instead of sending the query to the SQL server, - # write it into a log file. - # -# sql_log - - # Cisco VoIP specific bulk accounting -# pgsql-voip - -} - - -# Session database, used for checking Simultaneous-Use. Either the radutmp -# or rlm_sql module can handle this. -# The rlm_sql module is *much* faster -session { - radutmp - - # - # See "Simultaneous Use Checking Querie" in sql.conf -# sql -} - - -# Post-Authentication -# Once we KNOW that the user has been authenticated, there are -# additional steps we can take. -post-auth { - # Get an address from the IP Pool. -# main_pool -# sqlippool - - # - # If you want to have a log of authentication replies, - # un-comment the following line, and the 'detail reply_log' - # section, above. -# reply_log - - # - # After authenticating the user, do another SQL query. - # - # See "Authentication Logging Queries" in sql.conf -# sql - - # - # Instead of sending the query to the SQL server, - # write it into a log file. - # -# sql_log - - # - # Un-comment the following if you have set - # 'edir_account_policy_check = yes' in the ldap module sub-section of - # the 'modules' section. - # -# ldap - # - # Access-Reject packets are sent through the REJECT sub-section of the - # post-auth section. - # Uncomment the following and set the module name to the ldap instance - # name if you have set 'edir_account_policy_check = yes' in the ldap - # module sub-section of the 'modules' section. - # -# Post-Auth-Type REJECT { -# insert-module-name-here -# } - -} - -# -# When the server decides to proxy a request to a home server, -# the proxied request is first passed through the pre-proxy -# stage. This stage can re-write the request, or decide to -# cancel the proxy. -# -# Only a few modules currently have this method. -# -pre-proxy { -# attr_rewrite - - # Uncomment the following line if you want to change attributes - # as defined in the preproxy_users file. -# files - - # If you want to have a log of packets proxied to a home - # server, un-comment the following line, and the - # 'detail pre_proxy_log' section, above. -# pre_proxy_log -} - -# -# When the server receives a reply to a request it proxied -# to a home server, the request may be massaged here, in the -# post-proxy stage. -# -post-proxy { - - # If you want to have a log of replies from a home server, - # un-comment the following line, and the 'detail post_proxy_log' - # section, above. -# post_proxy_log - -# attr_rewrite - - # Uncomment the following line if you want to filter replies from - # remote proxies based on the rules defined in the 'attrs' file. - -# attr_filter - - # - # If you are proxying LEAP, you MUST configure the EAP - # module, and you MUST list it here, in the post-proxy - # stage. - # - # You MUST also use the 'nostrip' option in the 'realm' - # configuration. Otherwise, the User-Name attribute - # in the proxied request will not match the user name - # hidden inside of the EAP packet, and the end server will - # reject the EAP request. - # - eap -} diff --git a/files/etc/freeradius/radiusd.conf.template b/files/etc/freeradius/radiusd.conf.template deleted file mode 100644 index 7586c66..0000000 --- a/files/etc/freeradius/radiusd.conf.template +++ /dev/null @@ -1,2108 +0,0 @@ -## -## radiusd.conf -- FreeRADIUS server configuration file. -## -## http://www.freeradius.org/ -## $Id: radiusd.conf.in,v 1.188.2.4.2.11 2006/04/20 18:40:29 aland Exp $ -## - -# The location of other config files and -# logfiles are declared in this file -# -# Also general configuration for modules can be done -# in this file, it is exported through the API to -# modules that ask for it. -# -# The configuration variables defined here are of the form ${foo} -# They are local to this file, and do not change from request to -# request. -# -# The per-request variables are of the form %{Attribute-Name}, and -# are taken from the values of the attribute in the incoming -# request. See 'doc/variables.txt' for more information. - -prefix = /usr -exec_prefix = /usr -sysconfdir = /etc -localstatedir = /var -sbindir = ${exec_prefix}/sbin -logdir = /var/log/freeradius -raddbdir = /etc/freeradius -radacctdir = ${logdir}/radacct - -# Location of config and logfiles. -confdir = ${raddbdir} -run_dir = ${localstatedir}/run/freeradius - -# -# The logging messages for the server are appended to the -# tail of this file. -# -log_file = ${logdir}/radius.log - -# -# libdir: Where to find the rlm_* modules. -# -# This should be automatically set at configuration time. -# -# If the server builds and installs, but fails at execution time -# with an 'undefined symbol' error, then you can use the libdir -# directive to work around the problem. -# -# The cause is usually that a library has been installed on your -# system in a place where the dynamic linker CANNOT find it. When -# executing as root (or another user), your personal environment MAY -# be set up to allow the dynamic linker to find the library. When -# executing as a daemon, FreeRADIUS MAY NOT have the same -# personalized configuration. -# -# To work around the problem, find out which library contains that symbol, -# and add the directory containing that library to the end of 'libdir', -# with a colon separating the directory names. NO spaces are allowed. -# -# e.g. libdir = /usr/local/lib:/opt/package/lib -# -# You can also try setting the LD_LIBRARY_PATH environment variable -# in a script which starts the server. -# -# If that does not work, then you can re-configure and re-build the -# server to NOT use shared libraries, via: -# -# ./configure --disable-shared -# make -# make install -# -libdir = /usr/lib/freeradius - -# pidfile: Where to place the PID of the RADIUS server. -# -# The server may be signalled while it's running by using this -# file. -# -# This file is written when ONLY running in daemon mode. -# -# e.g.: kill -HUP `cat /var/run/freeradius/freeradius.pid` -# -pidfile = ${run_dir}/freeradius.pid - - -# user/group: The name (or #number) of the user/group to run radiusd as. -# -# If these are commented out, the server will run as the user/group -# that started it. In order to change to a different user/group, you -# MUST be root ( or have root privleges ) to start the server. -# -# We STRONGLY recommend that you run the server with as few permissions -# as possible. That is, if you're not using shadow passwords, the -# user and group items below should be set to 'nobody'. -# -# On SCO (ODT 3) use "user = nouser" and "group = nogroup". -# -# NOTE that some kernels refuse to setgid(group) when the value of -# (unsigned)group is above 60000; don't use group nobody on these systems! -# -# On systems with shadow passwords, you might have to set 'group = shadow' -# for the server to be able to read the shadow password file. If you can -# authenticate users while in debug mode, but not in daemon mode, it may be -# that the debugging mode server is running as a user that can read the -# shadow info, and the user listed below can not. -# -user = freerad -group = freerad - -# max_request_time: The maximum time (in seconds) to handle a request. -# -# Requests which take more time than this to process may be killed, and -# a REJECT message is returned. -# -# WARNING: If you notice that requests take a long time to be handled, -# then this MAY INDICATE a bug in the server, in one of the modules -# used to handle a request, OR in your local configuration. -# -# This problem is most often seen when using an SQL database. If it takes -# more than a second or two to receive an answer from the SQL database, -# then it probably means that you haven't indexed the database. See your -# SQL server documentation for more information. -# -# Useful range of values: 5 to 120 -# -max_request_time = 30 - -# delete_blocked_requests: If the request takes MORE THAN 'max_request_time' -# to be handled, then maybe the server should delete it. -# -# If you're running in threaded, or thread pool mode, this setting -# should probably be 'no'. Setting it to 'yes' when using a threaded -# server MAY cause the server to crash! -# -delete_blocked_requests = no - -# cleanup_delay: The time to wait (in seconds) before cleaning up -# a reply which was sent to the NAS. -# -# The RADIUS request is normally cached internally for a short period -# of time, after the reply is sent to the NAS. The reply packet may be -# lost in the network, and the NAS will not see it. The NAS will then -# re-send the request, and the server will respond quickly with the -# cached reply. -# -# If this value is set too low, then duplicate requests from the NAS -# MAY NOT be detected, and will instead be handled as seperate requests. -# -# If this value is set too high, then the server will cache too many -# requests, and some new requests may get blocked. (See 'max_requests'.) -# -# Useful range of values: 2 to 10 -# -cleanup_delay = 5 - -# max_requests: The maximum number of requests which the server keeps -# track of. This should be 256 multiplied by the number of clients. -# e.g. With 4 clients, this number should be 1024. -# -# If this number is too low, then when the server becomes busy, -# it will not respond to any new requests, until the 'cleanup_delay' -# time has passed, and it has removed the old requests. -# -# If this number is set too high, then the server will use a bit more -# memory for no real benefit. -# -# If you aren't sure what it should be set to, it's better to set it -# too high than too low. Setting it to 1000 per client is probably -# the highest it should be. -# -# Useful range of values: 256 to infinity -# -max_requests = 1024 - -# bind_address: Make the server listen on a particular IP address, and -# send replies out from that address. This directive is most useful -# for machines with multiple IP addresses on one interface. -# -# It can either contain "*", or an IP address, or a fully qualified -# Internet domain name. The default is "*" -# -# As of 1.0, you can also use the "listen" directive. See below for -# more information. -# -bind_address = * - -# port: Allows you to bind FreeRADIUS to a specific port. -# -# The default port that most NAS boxes use is 1645, which is historical. -# RFC 2138 defines 1812 to be the new port. Many new servers and -# NAS boxes use 1812, which can create interoperability problems. -# -# The port is defined here to be 0 so that the server will pick up -# the machine's local configuration for the radius port, as defined -# in /etc/services. -# -# If you want to use the default RADIUS port as defined on your server, -# (usually through 'grep radius /etc/services') set this to 0 (zero). -# -# A port given on the command-line via '-p' over-rides this one. -# -# As of 1.0, you can also use the "listen" directive. See below for -# more information. -# -port = 0 - -# -# By default, the server uses "bind_address" to listen to all IP's -# on a machine, or just one IP. The "port" configuration is used -# to select the authentication port used when listening on those -# addresses. -# -# If you want the server to listen on additional addresses, you can -# use the "listen" section. A sample section (commented out) is included -# below. This "listen" section duplicates the functionality of the -# "bind_address" and "port" configuration entries, but it only listens -# for authentication packets. -# -# If you comment out the "bind_address" and "port" configuration entries, -# then it becomes possible to make the server accept only accounting, -# or authentication packets. Previously, it always listened for both -# types of packets, and it was impossible to make it listen for only -# one type of packet. -# -#listen { - # IP address on which to listen. - # Allowed values are: - # dotted quad (1.2.3.4) - # hostname (radius.example.com) - # wildcard (*) -# ipaddr = * - - # Port on which to listen. - # Allowed values are: - # integer port number (1812) - # 0 means "use /etc/services for the proper port" -# port = 0 - - # Type of packets to listen for. - # Allowed values are: - # auth listen for authentication packets - # acct listen for accounting packets - # -# type = auth -#} - - -# hostname_lookups: Log the names of clients or just their IP addresses -# e.g., www.freeradius.org (on) or 206.47.27.232 (off). -# -# The default is 'off' because it would be overall better for the net -# if people had to knowingly turn this feature on, since enabling it -# means that each client request will result in AT LEAST one lookup -# request to the nameserver. Enabling hostname_lookups will also -# mean that your server may stop randomly for 30 seconds from time -# to time, if the DNS requests take too long. -# -# Turning hostname lookups off also means that the server won't block -# for 30 seconds, if it sees an IP address which has no name associated -# with it. -# -# allowed values: {no, yes} -# -hostname_lookups = no - -# Core dumps are a bad thing. This should only be set to 'yes' -# if you're debugging a problem with the server. -# -# allowed values: {no, yes} -# -allow_core_dumps = no - -# Regular expressions -# -# These items are set at configure time. If they're set to "yes", -# then setting them to "no" turns off regular expression support. -# -# If they're set to "no" at configure time, then setting them to "yes" -# WILL NOT WORK. It will give you an error. -# -regular_expressions = yes -extended_expressions = yes - -# Log the full User-Name attribute, as it was found in the request. -# -# allowed values: {no, yes} -# -log_stripped_names = yes - -# Log authentication requests to the log file. -# -# allowed values: {no, yes} -# -log_auth = yes - -# Log passwords with the authentication requests. -# log_auth_badpass - logs password if it's rejected -# log_auth_goodpass - logs password if it's correct -# -# allowed values: {no, yes} -# -log_auth_badpass = no -log_auth_goodpass = no - -# usercollide: Turn "username collision" code on and off. See the -# "doc/duplicate-users" file -# -# WARNING -# !!!!!!! Setting this to "yes" may result in the server behaving -# !!!!!!! strangely. The "username collision" code will ONLY work -# !!!!!!! with clear-text passwords. Even then, it may not do what -# !!!!!!! you want, or what you expect. -# !!!!!!! -# !!!!!!! We STRONGLY RECOMMEND that you do not use this feature, -# !!!!!!! and that you find another way of acheiving the same goal. -# !!!!!!! -# !!!!!!! e,g. module fail-over. See 'doc/configurable_failover' -# WARNING -# -usercollide = no - -# lower_user / lower_pass: -# Lower case the username/password "before" or "after" -# attempting to authenticate. -# -# If "before", the server will first modify the request and then try -# to auth the user. If "after", the server will first auth using the -# values provided by the user. If that fails it will reprocess the -# request after modifying it as you specify below. -# -# This is as close as we can get to case insensitivity. It is the -# admin's job to ensure that the username on the auth db side is -# *also* lowercase to make this work -# -# Default is 'no' (don't lowercase values) -# Valid values = "before" / "after" / "no" -# -lower_user = yes -lower_pass = no - -# nospace_user / nospace_pass: -# -# Some users like to enter spaces in their username or password -# incorrectly. To save yourself the tech support call, you can -# eliminate those spaces here: -# -# Default is 'no' (don't remove spaces) -# Valid values = "before" / "after" / "no" (explanation above) -# -nospace_user = before -nospace_pass = no - -# The program to execute to do concurrency checks. -checkrad = ${sbindir}/checkrad - -# SECURITY CONFIGURATION -# -# There may be multiple methods of attacking on the server. This -# section holds the configuration items which minimize the impact -# of those attacks -# -security { - # - # max_attributes: The maximum number of attributes - # permitted in a RADIUS packet. Packets which have MORE - # than this number of attributes in them will be dropped. - # - # If this number is set too low, then no RADIUS packets - # will be accepted. - # - # If this number is set too high, then an attacker may be - # able to send a small number of packets which will cause - # the server to use all available memory on the machine. - # - # Setting this number to 0 means "allow any number of attributes" - max_attributes = 200 - - # - # reject_delay: When sending an Access-Reject, it can be - # delayed for a few seconds. This may help slow down a DoS - # attack. It also helps to slow down people trying to brute-force - # crack a users password. - # - # Setting this number to 0 means "send rejects immediately" - # - # If this number is set higher than 'cleanup_delay', then the - # rejects will be sent at 'cleanup_delay' time, when the request - # is deleted from the internal cache of requests. - # - # Useful ranges: 1 to 5 - reject_delay = 0 - - # - # status_server: Whether or not the server will respond - # to Status-Server requests. - # - # Normally this should be set to "no", because they're useless. - # See: http://www.freeradius.org/rfc/rfc2865.html#Keep-Alives - # - # However, certain NAS boxes may require them. - # - # When sent a Status-Server message, the server responds with - # an Access-Accept packet, containing a Reply-Message attribute, - # which is a string describing how long the server has been - # running. - # - status_server = no -} - -# PROXY CONFIGURATION -# -# proxy_requests: Turns proxying of RADIUS requests on or off. -# -# The server has proxying turned on by default. If your system is NOT -# set up to proxy requests to another server, then you can turn proxying -# off here. This will save a small amount of resources on the server. -# -# If you have proxying turned off, and your configuration files say -# to proxy a request, then an error message will be logged. -# -# To disable proxying, change the "yes" to "no", and comment the -# $INCLUDE line. -# -# allowed values: {no, yes} -# -proxy_requests = yes -$INCLUDE ${confdir}/proxy.conf - - -# CLIENTS CONFIGURATION -# -# Client configuration is defined in "clients.conf". -# - -# The 'clients.conf' file contains all of the information from the old -# 'clients' and 'naslist' configuration files. We recommend that you -# do NOT use 'client's or 'naslist', although they are still -# supported. -# -# Anything listed in 'clients.conf' will take precedence over the -# information from the old-style configuration files. -# -$INCLUDE ${confdir}/clients.conf - - -# SNMP CONFIGURATION -# -# Snmp configuration is only valid if SNMP support was enabled -# at compile time. -# -# To enable SNMP querying of the server, set the value of the -# 'snmp' attribute to 'yes' -# -#snmp = no -#$INCLUDE ${confdir}/snmp.conf - - -# THREAD POOL CONFIGURATION -# -# The thread pool is a long-lived group of threads which -# take turns (round-robin) handling any incoming requests. -# -# You probably want to have a few spare threads around, -# so that high-load situations can be handled immediately. If you -# don't have any spare threads, then the request handling will -# be delayed while a new thread is created, and added to the pool. -# -# You probably don't want too many spare threads around, -# otherwise they'll be sitting there taking up resources, and -# not doing anything productive. -# -# The numbers given below should be adequate for most situations. -# -thread pool { - # Number of servers to start initially --- should be a reasonable - # ballpark figure. - start_servers = 5 - - # Limit on the total number of servers running. - # - # If this limit is ever reached, clients will be LOCKED OUT, so it - # should NOT BE SET TOO LOW. It is intended mainly as a brake to - # keep a runaway server from taking the system with it as it spirals - # down... - # - # You may find that the server is regularly reaching the - # 'max_servers' number of threads, and that increasing - # 'max_servers' doesn't seem to make much difference. - # - # If this is the case, then the problem is MOST LIKELY that - # your back-end databases are taking too long to respond, and - # are preventing the server from responding in a timely manner. - # - # The solution is NOT do keep increasing the 'max_servers' - # value, but instead to fix the underlying cause of the - # problem: slow database, or 'hostname_lookups=yes'. - # - # For more information, see 'max_request_time', above. - # - max_servers = 32 - - # Server-pool size regulation. Rather than making you guess - # how many servers you need, FreeRADIUS dynamically adapts to - # the load it sees, that is, it tries to maintain enough - # servers to handle the current load, plus a few spare - # servers to handle transient load spikes. - # - # It does this by periodically checking how many servers are - # waiting for a request. If there are fewer than - # min_spare_servers, it creates a new spare. If there are - # more than max_spare_servers, some of the spares die off. - # The default values are probably OK for most sites. - # - min_spare_servers = 3 - max_spare_servers = 10 - - # There may be memory leaks or resource allocation problems with - # the server. If so, set this value to 300 or so, so that the - # resources will be cleaned up periodically. - # - # This should only be necessary if there are serious bugs in the - # server which have not yet been fixed. - # - # '0' is a special value meaning 'infinity', or 'the servers never - # exit' - max_requests_per_server = 0 -} - -# MODULE CONFIGURATION -# -# The names and configuration of each module is located in this section. -# -# After the modules are defined here, they may be referred to by name, -# in other sections of this configuration file. -# -modules { - # - # Each module has a configuration as follows: - # - # name [ instance ] { - # config_item = value - # ... - # } - # - # The 'name' is used to load the 'rlm_name' library - # which implements the functionality of the module. - # - # The 'instance' is optional. To have two different instances - # of a module, it first must be referred to by 'name'. - # The different copies of the module are then created by - # inventing two 'instance' names, e.g. 'instance1' and 'instance2' - # - # The instance names can then be used in later configuration - # INSTEAD of the original 'name'. See the 'radutmp' configuration - # below for an example. - # - - # PAP module to authenticate users based on their stored password - # - # Supports multiple encryption schemes - # clear: Clear text - # crypt: Unix crypt - # md5: MD5 ecnryption - # sha1: SHA1 encryption. - # DEFAULT: crypt -# pap { -# encryption_scheme = crypt -# } - - # CHAP module - # - # To authenticate requests containing a CHAP-Password attribute. - # -# chap { -# authtype = CHAP -# } - - # Pluggable Authentication Modules - # - # For Linux, see: - # http://www.kernel.org/pub/linux/libs/pam/index.html - # - # WARNING: On many systems, the system PAM libraries have - # memory leaks! We STRONGLY SUGGEST that you do not - # use PAM for authentication, due to those memory leaks. - # -# pam { - # - # The name to use for PAM authentication. - # PAM looks in /etc/pam.d/${pam_auth_name} - # for it's configuration. See 'redhat/radiusd-pam' - # for a sample PAM configuration file. - # - # Note that any Pam-Auth attribute set in the 'authorize' - # section will over-ride this one. - # -# pam_auth = radiusd -# } - - # Unix /etc/passwd style authentication - # -# unix { - # - # Cache /etc/passwd, /etc/shadow, and /etc/group - # - # The default is to NOT cache them. - # - # For FreeBSD and NetBSD, you do NOT want to enable - # the cache, as it's password lookups are done via a - # database, so set this value to 'no'. - # - # Some systems (e.g. RedHat Linux with pam_pwbd) can - # take *seconds* to check a password, when th passwd - # file containing 1000's of entries. For those systems, - # you should set the cache value to 'yes', and set - # the locations of the 'passwd', 'shadow', and 'group' - # files, below. - # - # allowed values: {no, yes} -# cache = no - - # Reload the cache every 600 seconds (10mins). 0 to disable. -# cache_reload = 600 - - # - # Define the locations of the normal passwd, shadow, and - # group files. - # - # 'shadow' is commented out by default, because not all - # systems have shadow passwords. - # - # To force the module to use the system password functions, - # instead of reading the files, leave the following entries - # commented out. - # - # This is required for some systems, like FreeBSD, - # and Mac OSX. - # - # passwd = /etc/passwd -# shadow = /etc/shadow - # group = /etc/group - - # - # The location of the "wtmp" file. - # This should be moved to it's own module soon. - # - # The only use for 'radlast'. If you don't use - # 'radlast', then you can comment out this item. - # -# radwtmp = ${logdir}/radwtmp -# } - - # Extensible Authentication Protocol - # - # For all EAP related authentications. - # Now in another file, because it is very large. - # -$INCLUDE ${confdir}/eap.conf - - # Microsoft CHAP authentication - # - # This module supports MS-CHAP and MS-CHAPv2 authentication. - # It also enforces the SMB-Account-Ctrl attribute. - # -# mschap { - # - # As of 0.9, the mschap module does NOT support - # reading from /etc/smbpasswd. - # - # If you are using /etc/smbpasswd, see the 'passwd' - # module for an example of how to use /etc/smbpasswd - - # if use_mppe is not set to no mschap will - # add MS-CHAP-MPPE-Keys for MS-CHAPv1 and - # MS-MPPE-Recv-Key/MS-MPPE-Send-Key for MS-CHAPv2 - # - #use_mppe = no - - # if mppe is enabled require_encryption makes - # encryption moderate - # - #require_encryption = yes - - # require_strong always requires 128 bit key - # encryption - # - #require_strong = yes - - # Windows sends us a username in the form of - # DOMAIN\user, but sends the challenge response - # based on only the user portion. This hack - # corrects for that incorrect behavior. - # - #with_ntdomain_hack = no - - # The module can perform authentication itself, OR - # use a Windows Domain Controller. This configuration - # directive tells the module to call the ntlm_auth - # program, which will do the authentication, and return - # the NT-Key. Note that you MUST have "winbindd" and - # "nmbd" running on the local machine for ntlm_auth - # to work. See the ntlm_auth program documentation - # for details. - # - # Be VERY careful when editing the following line! - # - #ntlm_auth = "/path/to/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" -# } - - # Lightweight Directory Access Protocol (LDAP) - # - # This module definition allows you to use LDAP for - # authorization and authentication. - # - # See doc/rlm_ldap for description of configuration options - # and sample authorize{} and authenticate{} blocks - # - # However, LDAP can be used for authentication ONLY when the - # Access-Request packet contains a clear-text User-Password - # attribute. LDAP authentication will NOT work for any other - # authentication method. - # - # This means that LDAP servers don't understand EAP. If you - # force "Auth-Type = LDAP", and then send the server a - # request containing EAP authentication, then authentication - # WILL NOT WORK. - # - # The solution is to use the default configuration, which does - # work. - # - # Setting "Auth-Type = LDAP" is ALMOST ALWAYS WRONG. We - # really can't emphasize this enough. - # - ldap { - server = "#HOSTNAME#" - # identity = "cn=admin,o=My Org,c=UA" - # password = mypass - port = 389 - basedn = "#BASEDN#" - filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" - # base_filter = "(objectclass=radiusprofile)" - - # set this to 'yes' to use TLS encrypted connections - # to the LDAP database by using the StartTLS extended - # operation. - # The StartTLS operation is supposed to be used with normal - # ldap connections instead of using ldaps (port 689) connections - start_tls = no - - # tls_cacertfile = /path/to/cacert.pem - # tls_cacertdir = /path/to/ca/dir/ - # tls_certfile = /path/to/radius.crt - # tls_keyfile = /path/to/radius.key - # tls_randfile = /path/to/rnd - # tls_require_cert = "demand" - - # default_profile = "cn=radprofile,ou=dialup,o=My Org,c=UA" - # profile_attribute = "radiusProfileDn" -# access_attr = "dialupAccess" - - # Mapping of RADIUS dictionary attributes to LDAP - # directory attributes. - dictionary_mapping = ${raddbdir}/ldap.attrmap - - ldap_connections_number = 5 - - # - # NOTICE: The password_header directive is NOT case insensitive - # - # password_header = "{clear}" - # - # Set: - # password_attribute = nspmPassword - # - # to get the user's password from a Novell eDirectory - # backend. This will work *only if* freeRADIUS is - # configured to build with --with-edir option. - # - # - # The server can usually figure this out on its own, and pull - # the correct User-Password or NT-Password from the database. - # - # Note that NT-Passwords MUST be stored as a 32-digit hex - # string, and MUST start off with "0x", such as: - # - # 0x000102030405060708090a0b0c0d0e0f - # - # Without the leading "0x", NT-Passwords will not work. - # This goes for NT-Passwords stored in SQL, too. - # - password_attribute = userPassword - # - # Un-comment the following to disable Novell eDirectory account - # policy check and intruder detection. This will work *only if* - # FreeRADIUS is configured to build with --with-edir option. - # - # edir_account_policy_check=no - # - # groupname_attribute = cn - # groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" - # groupmembership_attribute = radiusGroupName - timeout = 4 - timelimit = 3 - net_timeout = 1 - compare_check_items = no - # do_xlat = yes - # access_attr_used_for_allow = yes - - # - # By default, if the packet contains a User-Password, - # and no other module is configured to handle the - # authentication, the LDAP module sets itself to do - # LDAP bind for authentication. - # - # You can disable this behavior by setting the following - # configuration entry to "no". - # - # allowed values: {no, yes} - # set_auth_type = yes - } - - # passwd module allows to do authorization via any passwd-like - # file and to extract any attributes from these modules - # - # parameters are: - # filename - path to filename - # format - format for filename record. This parameters - # correlates record in the passwd file and RADIUS - # attributes. - # - # Field marked as '*' is key field. That is, the parameter - # with this name from the request is used to search for - # the record from passwd file - # Attribute marked as '=' is added to reply_itmes instead - # of default configure_itmes - # Attribute marked as '~' is added to request_items - # - # Field marked as ',' may contain a comma separated list - # of attributes. - # authtype - if record found this Auth-Type is used to authenticate - # user - # hashsize - hashtable size. If 0 or not specified records are not - # stored in memory and file is red on every request. - # allowmultiplekeys - if few records for every key are allowed - # ignorenislike - ignore NIS-related records - # delimiter - symbol to use as a field separator in passwd file, - # for format ':' symbol is always used. '\0', '\n' are - # not allowed - # - - # An example configuration for using /etc/smbpasswd. - # - #passwd etc_smbpasswd { - # filename = /etc/smbpasswd - # format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::" - # authtype = MS-CHAP - # hashsize = 100 - # ignorenislike = no - # allowmultiplekeys = no - #} - - # Similar configuration, for the /etc/group file. Adds a Group-Name - # attribute for every group that the user is member of. - # - #passwd etc_group { - # filename = /etc/group - # format = "=Group-Name:::*,User-Name" - # hashsize = 50 - # ignorenislike = yes - # allowmultiplekeys = yes - # delimiter = ":" - #} - - # Realm module, for proxying. - # - # You can have multiple instances of the realm module to - # support multiple realm syntaxs at the same time. The - # search order is defined by the order in the authorize and - # preacct sections. - # - # Four config options: - # format - must be 'prefix' or 'suffix' - # delimiter - must be a single character - # ignore_default - set to 'yes' or 'no' - # ignore_null - set to 'yes' or 'no' - # - # ignore_default and ignore_null can be set to 'yes' to prevent - # the module from matching against DEFAULT or NULL realms. This - # may be useful if you have have multiple instances of the - # realm module. - # - # They both default to 'no'. - # - - # 'realm/username' - # - # Using this entry, IPASS users have their realm set to "IPASS". -# realm IPASS { -# format = prefix -# delimiter = "/" -# ignore_default = no -# ignore_null = no -# } - - # 'username@realm' - # - realm suffix { - format = suffix - delimiter = "@" - ignore_default = no - ignore_null = no - } - - # 'username%realm' - # -# realm realmpercent { -# format = suffix -# delimiter = "%" -# ignore_default = no -# ignore_null = no -# } - - # - # 'domain\user' - # -# realm ntdomain { -# format = prefix -# delimiter = "\\" -# ignore_default = no -# ignore_null = no -# } - - # A simple value checking module - # - # It can be used to check if an attribute value in the request - # matches a (possibly multi valued) attribute in the check - # items This can be used for example for caller-id - # authentication. For the module to run, both the request - # attribute and the check items attribute must exist - # - # i.e. - # A user has an ldap entry with 2 radiusCallingStationId - # attributes with values "12345678" and "12345679". If we - # enable rlm_checkval, then any request which contains a - # Calling-Station-Id with one of those two values will be - # accepted. Requests with other values for - # Calling-Station-Id will be rejected. - # - # Regular expressions in the check attribute value are allowed - # as long as the operator is '=~' - # -# checkval { - # The attribute to look for in the request -# item-name = Calling-Station-Id - - # The attribute to look for in check items. Can be multi valued -# check-name = Calling-Station-Id - - # The data type. Can be - # string,integer,ipaddr,date,abinary,octets -# data-type = string - - # If set to yes and we dont find the item-name attribute in the - # request then we send back a reject - # DEFAULT is no - #notfound-reject = no -# } - - # rewrite arbitrary packets. Useful in accounting and authorization. - # - # - # The module can also use the Rewrite-Rule attribute. If it - # is set and matches the name of the module instance, then - # that module instance will be the only one which runs. - # - # Also if new_attribute is set to yes then a new attribute - # will be created containing the value replacewith and it - # will be added to searchin (packet, reply, proxy, proxy_reply or config). - # searchfor,ignore_case and max_matches will be ignored in that case. - # - # Backreferences are supported: %{0} will contain the string the whole match - # and %{1} to %{8} will contain the contents of the 1st to the 8th parentheses - # - # If max_matches is greater than one the backreferences will correspond to the - # first match - - # - #attr_rewrite sanecallerid { - # attribute = Called-Station-Id - # may be "packet", "reply", "proxy", "proxy_reply" or "config" - # searchin = packet - # searchfor = "[+ ]" - # replacewith = "" - # ignore_case = no - # new_attribute = no - # max_matches = 10 - # ## If set to yes then the replace string will be appended to the original string - # append = no - #} - - # Preprocess the incoming RADIUS request, before handing it off - # to other modules. - # - # This module processes the 'huntgroups' and 'hints' files. - # In addition, it re-writes some weird attributes created - # by some NASes, and converts the attributes into a form which - # is a little more standard. - # - preprocess { -# huntgroups = ${confdir}/huntgroups - hints = ${confdir}/hints - - # This hack changes Ascend's wierd port numberings - # to standard 0-??? port numbers so that the "+" works - # for IP address assignments. -# with_ascend_hack = no -# ascend_channels_per_line = 23 - - # Windows NT machines often authenticate themselves as - # NT_DOMAIN\username - # - # If this is set to 'yes', then the NT_DOMAIN portion - # of the user-name is silently discarded. - # - # This configuration entry SHOULD NOT be used. - # See the "realms" module for a better way to handle - # NT domains. -# with_ntdomain_hack = no - - # Specialix Jetstream 8500 24 port access server. - # - # If the user name is 10 characters or longer, a "/" - # and the excess characters after the 10th are - # appended to the user name. - # - # If you're not running that NAS, you don't need - # this hack. -# with_specialix_jetstream_hack = no - - # Cisco (and Quintum in Cisco mode) sends it's VSA attributes - # with the attribute name *again* in the string, like: - # - # H323-Attribute = "h323-attribute=value". - # - # If this configuration item is set to 'yes', then - # the redundant data in the the attribute text is stripped - # out. The result is: - # - # H323-Attribute = "value" - # - # If you're not running a Cisco or Quintum NAS, you don't - # need this hack. -# with_cisco_vsa_hack = no - } - - # Livingston-style 'users' file - # -# files { -# usersfile = ${confdir}/users -# acctusersfile = ${confdir}/acct_users -# preproxy_usersfile = ${confdir}/preproxy_users - - # If you want to use the old Cistron 'users' file - # with FreeRADIUS, you should change the next line - # to 'compat = cistron'. You can the copy your 'users' - # file from Cistron. -# compat = no -# } - - # Write a detailed log of all accounting records received. - # - detail { - # Note that we do NOT use NAS-IP-Address here, as - # that attribute MAY BE from the originating NAS, and - # NOT from the proxy which actually sent us the - # request. The Client-IP-Address attribute is ALWAYS - # the address of the client which sent us the - # request. - # - # The following line creates a new detail file for - # every radius client (by IP address or hostname). - # In addition, a new detail file is created every - # day, so that the detail file doesn't have to go - # through a 'log rotation' - # - # If your detail files are large, you may also want - # to add a ':%H' (see doc/variables.txt) to the end - # of it, to create a new detail file every hour, e.g.: - # - # ..../detail-%Y%m%d:%H - # - # This will create a new detail file for every hour. - # - detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d - - # - # The Unix-style permissions on the 'detail' file. - # - # The detail file often contains secret or private - # information about users. So by keeping the file - # permissions restrictive, we can prevent unwanted - # people from seeing that information. - detailperm = 0600 - - # - # Certain attributes such as User-Password may be - # "sensitive", so they should not be printed in the - # detail file. This section lists the attributes - # that should be suppressed. - # - # The attributes should be listed one to a line. - # - suppress { - User-Password - } - } - - # - # Many people want to log authentication requests. - # Rather than modifying the server core to print out more - # messages, we can use a different instance of the 'detail' - # module, to log the authentication requests to a file. - # - # You will also need to un-comment the 'auth_log' line - # in the 'authorize' section, below. - # - # detail auth_log { - # detailfile = ${radacctdir}/%{Client-IP-Address}/auth-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - # detailperm = 0600 - # } - - # - # This module logs authentication reply packets sent - # to a NAS. Both Access-Accept and Access-Reject packets - # are logged. - # - # You will also need to un-comment the 'reply_log' line - # in the 'post-auth' section, below. - # - detail reply_log { - detailfile = ${radacctdir}/%{Client-IP-Address}/reply-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - detailperm = 0600 - } - - # - # This module logs packets proxied to a home server. - # - # You will also need to un-comment the 'pre_proxy_log' line - # in the 'pre-proxy' section, below. - # - detail pre_proxy_log { - detailfile = ${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - detailperm = 0600 - } - - # - # This module logs response packets from a home server. - # - # You will also need to un-comment the 'post_proxy_log' line - # in the 'post-proxy' section, below. - # - detail post_proxy_log { - detailfile = ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d - - # - # This MUST be 0600, otherwise anyone can read - # the users passwords! - detailperm = 0600 - } - - # - # The rlm_sql_log module appends the SQL queries in a log - # file which is read later by the radsqlrelay program. - # - # This module only performs the dynamic expansion of the - # variables found in the SQL statements. No operation is - # executed on the database server. (this could be done - # later by an external program) That means the module is - # useful only with non-"SELECT" statements. - # - # See rlm_sql_log(5) manpage. - # -# sql_log { -# path = ${radacctdir}/sql-relay -# acct_table = "radacct" -# postauth_table = "radpostauth" -# -# Start = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '%S', '0', '0', '');" -# Stop = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '0', '%S', '%{Acct-Session-Time}', \ -# '%{Acct-Terminate-Cause}');" -# Alive = "INSERT INTO ${acct_table} (AcctSessionId, UserName, \ -# NASIPAddress, FramedIPAddress, AcctStartTime, AcctStopTime, \ -# AcctSessionTime, AcctTerminateCause) VALUES \ -# ('%{Acct-Session-Id}', '%{User-Name}', '%{NAS-IP-Address}', \ -# '%{Framed-IP-Address}', '0', '0', '%{Acct-Session-Time}','');" -# -# Post-Auth = "INSERT INTO ${postauth_table} \ -# (user, pass, reply, date) VALUES \ -# ('%{User-Name}', '%{User-Password:-Chap-Password}', \ -# '%{reply:Packet-Type}', '%S');" -# } - - # - # Create a unique accounting session Id. Many NASes re-use - # or repeat values for Acct-Session-Id, causing no end of - # confusion. - # - # This module will add a (probably) unique session id - # to an accounting packet based on the attributes listed - # below found in the packet. See doc/rlm_acct_unique for - # more information. - # -# acct_unique { -# key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" -# } - - - # Include another file that has the SQL-related configuration. - # This is another file only because it tends to be big. - # - # The following configuration file is for use with MySQL. - # - # For Postgresql, use: ${confdir}/postgresql.conf - # For MS-SQL, use: ${confdir}/mssql.conf - # For Oracle, use: ${confdir}/oraclesql.conf - # -# $INCLUDE ${confdir}/sql.conf - - - # For Cisco VoIP specific accounting with Postgresql, - # use: ${confdir}/pgsql-voip.conf - # - # You will also need the sql schema from: - # src/billing/cisco_h323_db_schema-postgres.sql - # Note: This config can be use AS WELL AS the standard sql - # config if you need SQL based Auth - - - # Write a 'utmp' style file, of which users are currently - # logged in, and where they've logged in from. - # - # This file is used mainly for Simultaneous-Use checking, - # and also 'radwho', to see who's currently logged in. - # -# radutmp { - # Where the file is stored. It's not a log file, - # so it doesn't need rotating. - # -# filename = ${logdir}/radutmp - - # The field in the packet to key on for the - # 'user' name, If you have other fields which you want - # to use to key on to control Simultaneous-Use, - # then you can use them here. - # - # Note, however, that the size of the field in the - # 'utmp' data structure is small, around 32 - # characters, so that will limit the possible choices - # of keys. - # - # You may want instead: %{Stripped-User-Name:-%{User-Name}} -# username = %{User-Name} - - - # Whether or not we want to treat "user" the same - # as "USER", or "User". Some systems have problems - # with case sensitivity, so this should be set to - # 'no' to enable the comparisons of the key attribute - # to be case insensitive. - # -# case_sensitive = yes - - # Accounting information may be lost, so the user MAY - # have logged off of the NAS, but we haven't noticed. - # If so, we can verify this information with the NAS, - # - # If we want to believe the 'utmp' file, then this - # configuration entry can be set to 'no'. - # -# check_with_nas = yes - - # Set the file permissions, as the contents of this file - # are usually private. -# perm = 0600 - -# callerid = "yes" -# } - - # "Safe" radutmp - does not contain caller ID, so it can be - # world-readable, and radwho can work for normal users, without - # exposing any information that isn't already exposed by who(1). - # - # This is another 'instance' of the radutmp module, but it is given - # then name "sradutmp" to identify it later in the "accounting" - # section. -# radutmp sradutmp { -# filename = ${logdir}/sradutmp -# perm = 0644 -# callerid = "no" -# } - - # attr_filter - filters the attributes received in replies from - # proxied servers, to make sure we send back to our RADIUS client - # only allowed attributes. -# attr_filter { -# attrsfile = ${confdir}/attrs -# } - - # counter module: - # This module takes an attribute (count-attribute). - # It also takes a key, and creates a counter for each unique - # key. The count is incremented when accounting packets are - # received by the server. The value of the increment depends - # on the attribute type. - # If the attribute is Acct-Session-Time or of an integer type we add the - # value of the attribute. If it is anything else we increase the - # counter by one. - # - # The 'reset' parameter defines when the counters are all reset to - # zero. It can be hourly, daily, weekly, monthly or never. - # - # hourly: Reset on 00:00 of every hour - # daily: Reset on 00:00:00 every day - # weekly: Reset on 00:00:00 on sunday - # monthly: Reset on 00:00:00 of the first day of each month - # - # It can also be user defined. It should be of the form: - # num[hdwm] where: - # h: hours, d: days, w: weeks, m: months - # If the letter is ommited days will be assumed. In example: - # reset = 10h (reset every 10 hours) - # reset = 12 (reset every 12 days) - # - # - # The check-name attribute defines an attribute which will be - # registered by the counter module and can be used to set the - # maximum allowed value for the counter after which the user - # is rejected. - # Something like: - # - # DEFAULT Max-Daily-Session := 36000 - # Fall-Through = 1 - # - # You should add the counter module in the instantiate - # section so that it registers check-name before the files - # module reads the users file. - # - # If check-name is set and the user is to be rejected then we - # send back a Reply-Message and we log a Failure-Message in - # the radius.log - # If the count attribute is Acct-Session-Time then on each login - # we send back the remaining online time as a Session-Timeout attribute - # - # The counter-name can also be used instead of using the check-name - # like below: - # - # DEFAULT Daily-Session-Time > 3600, Auth-Type = Reject - # Reply-Message = "You've used up more than one hour today" - # - # The allowed-servicetype attribute can be used to only take - # into account specific sessions. For example if a user first - # logs in through a login menu and then selects ppp there will - # be two sessions. One for Login-User and one for Framed-User - # service type. We only need to take into account the second one. - # - # The module should be added in the instantiate, authorize and - # accounting sections. Make sure that in the authorize - # section it comes after any module which sets the - # 'check-name' attribute. - # -# counter daily { -# filename = ${raddbdir}/db.daily -# key = User-Name -# count-attribute = Acct-Session-Time -# reset = daily -# counter-name = Daily-Session-Time -# check-name = Max-Daily-Session -# allowed-servicetype = Framed-User -# cache-size = 5000 -# } - - # - # This module is an SQL enabled version of the counter module. - # - # Rather than maintaining seperate (GDBM) databases of - # accounting info for each counter, this module uses the data - # stored in the raddacct table by the sql modules. This - # module NEVER does any database INSERTs or UPDATEs. It is - # totally dependent on the SQL module to process Accounting - # packets. - # - # The 'sqlmod_inst' parameter holds the instance of the sql - # module to use when querying the SQL database. Normally it - # is just "sql". If you define more and one SQL module - # instance (usually for failover situations), you can - # specify which module has access to the Accounting Data - # (radacct table). - # - # The 'reset' parameter defines when the counters are all - # reset to zero. It can be hourly, daily, weekly, monthly or - # never. It can also be user defined. It should be of the - # form: - # num[hdwm] where: - # h: hours, d: days, w: weeks, m: months - # If the letter is ommited days will be assumed. In example: - # reset = 10h (reset every 10 hours) - # reset = 12 (reset every 12 days) - # - # The 'key' parameter specifies the unique identifier for the - # counter records (usually 'User-Name'). - # - # The 'query' parameter specifies the SQL query used to get - # the current Counter value from the database. There are 3 - # parameters that can be used in the query: - # %k 'key' parameter - # %b unix time value of beginning of reset period - # %e unix time value of end of reset period - # - # The 'check-name' parameter is the name of the 'check' - # attribute to use to access the counter in the 'users' file - # or SQL radcheck or radcheckgroup tables. - # - # DEFAULT Max-Daily-Session > 3600, Auth-Type = Reject - # Reply-Message = "You've used up more than one hour today" - # -# sqlcounter dailycounter { -# counter-name = Daily-Session-Time -# check-name = Max-Daily-Session -# sqlmod-inst = sql -# key = User-Name -# reset = daily - - # This query properly handles calls that span from the - # previous reset period into the current period but - # involves more work for the SQL server than those - # below -# query = "SELECT SUM(AcctSessionTime - \ -# GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ -# FROM radacct WHERE UserName='%{%k}' AND \ -# UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" - - # This query ignores calls that started in a previous - # reset period and continue into into this one. But it - # is a little easier on the SQL server -# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \ -# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')" - - # This query is the same as above, but demonstrates an - # additional counter parameter '%e' which is the - # timestamp for the end of the period -# query = "SELECT SUM(AcctSessionTime) FROM radacct \ -# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \ -# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')" -# } - -# sqlcounter monthlycounter { -# counter-name = Monthly-Session-Time -# check-name = Max-Monthly-Session -# sqlmod-inst = sql -# key = User-Name -# reset = monthly - - # This query properly handles calls that span from the - # previous reset period into the current period but - # involves more work for the SQL server than those - # below -# query = "SELECT SUM(AcctSessionTime - \ -# GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ -# FROM radacct WHERE UserName='%{%k}' AND \ -# UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" - - # This query ignores calls that started in a previous - # reset period and continue into into this one. But it - # is a little easier on the SQL server -# query = "SELECT SUM(AcctSessionTime) FROM radacct WHERE \ -# UserName='%{%k}' AND AcctStartTime > FROM_UNIXTIME('%b')" - - # This query is the same as above, but demonstrates an - # additional counter parameter '%e' which is the - # timestamp for the end of the period -# query = "SELECT SUM(AcctSessionTime) FROM radacct \ -# WHERE UserName='%{%k}' AND AcctStartTime BETWEEN \ -# FROM_UNIXTIME('%b') AND FROM_UNIXTIME('%e')" -# } - - # - # The "always" module is here for debugging purposes. Each - # instance simply returns the same result, always, without - # doing anything. - always fail { - rcode = fail - } - always reject { - rcode = reject - } - always ok { - rcode = ok - simulcount = 0 - mpp = no - } - - # - # The 'expression' module currently has no configuration. - # - # This module is useful only for 'xlat'. To use it, - # put 'exec' into the 'instantiate' section. You can then - # do dynamic translation of attributes like: - # - # Attribute-Name = `%{expr:2 + 3 + %{exec: uid -u}}` - # - # The value of the attribute will be replaced with the output - # of the program which is executed. Due to RADIUS protocol - # limitations, any output over 253 bytes will be ignored. -# expr { -# } - - # - # The 'digest' module currently has no configuration. - # - # "Digest" authentication against a Cisco SIP server. - # See 'doc/rfc/draft-sterman-aaa-sip-00.txt' for details - # on performing digest authentication for Cisco SIP servers. - # -# digest { -# } - - # - # Execute external programs - # - # This module is useful only for 'xlat'. To use it, - # put 'exec' into the 'instantiate' section. You can then - # do dynamic translation of attributes like: - # - # Attribute-Name = `%{exec:/path/to/program args}` - # - # The value of the attribute will be replaced with the output - # of the program which is executed. Due to RADIUS protocol - # limitations, any output over 253 bytes will be ignored. - # - # The RADIUS attributes from the user request will be placed - # into environment variables of the executed program, as - # described in 'doc/variables.txt' - # -# exec { -# wait = yes -# input_pairs = request -# } - - # - # This is a more general example of the execute module. - # - # This one is called "echo". - # - # Attribute-Name = `%{echo:/path/to/program args}` - # - # If you wish to execute an external program in more than - # one section (e.g. 'authorize', 'pre_proxy', etc), then it - # is probably best to define a different instance of the - # 'exec' module for every section. - # -# exec echo { - # - # Wait for the program to finish. - # - # If we do NOT wait, then the program is "fire and - # forget", and any output attributes from it are ignored. - # - # If we are looking for the program to output - # attributes, and want to add those attributes to the - # request, then we MUST wait for the program to - # finish, and therefore set 'wait=yes' - # - # allowed values: {no, yes} -# wait = yes - - # - # The name of the program to execute, and it's - # arguments. Dynamic translation is done on this - # field, so things like the following example will - # work. - # -# program = "/bin/echo %{User-Name}" - - # - # The attributes which are placed into the - # environment variables for the program. - # - # Allowed values are: - # - # request attributes from the request - # config attributes from the configuration items list - # reply attributes from the reply - # proxy-request attributes from the proxy request - # proxy-reply attributes from the proxy reply - # - # Note that some attributes may not exist at some - # stages. e.g. There may be no proxy-reply - # attributes if this module is used in the - # 'authorize' section. - # -# input_pairs = request - - # - # Where to place the output attributes (if any) from - # the executed program. The values allowed, and the - # restrictions as to availability, are the same as - # for the input_pairs. - # -# output_pairs = reply - - # - # When to execute the program. If the packet - # type does NOT match what's listed here, then - # the module does NOT execute the program. - # - # For a list of allowed packet types, see - # the 'dictionary' file, and look for VALUEs - # of the Packet-Type attribute. - # - # By default, the module executes on ANY packet. - # Un-comment out the following line to tell the - # module to execute only if an Access-Accept is - # being sent to the NAS. - # - #packet_type = Access-Accept -# } - - # Do server side ip pool management. Should be added in post-auth and - # accounting sections. - # - # The module also requires the existance of the Pool-Name - # attribute. That way the administrator can add the Pool-Name - # attribute in the user profiles and use different pools - # for different users. The Pool-Name attribute is a *check* item not - # a reply item. - # - # Example: - # radiusd.conf: ippool students { [...] } - # users file : DEFAULT Group == students, Pool-Name := "students" - # - # ********* IF YOU CHANGE THE RANGE PARAMETERS YOU MUST ********* - # ********* THEN ERASE THE DB FILES ********* - # -# ippool main_pool { - - # range-start,range-stop: The start and end ip - # addresses for the ip pool -# range-start = 192.168.1.1 -# range-stop = 192.168.3.254 - - # netmask: The network mask used for the ip's -# netmask = 255.255.255.0 - - # cache-size: The gdbm cache size for the db - # files. Should be equal to the number of ip's - # available in the ip pool -# cache-size = 800 - - # session-db: The main db file used to allocate ip's to clients -# session-db = ${raddbdir}/db.ippool - - # ip-index: Helper db index file used in multilink -# ip-index = ${raddbdir}/db.ipindex - - # override: Will this ippool override a Framed-IP-Address already set -# override = no - - # maximum-timeout: If not zero specifies the maximum time in seconds an - # entry may be active. Default: 0 -# maximum-timeout = 0 -# } - - # $INCLUDE ${confdir}/sqlippool.conf - - # OTP token support. Not included by default. - # $INCLUDE ${confdir}/otp.conf - -} - -# Instantiation -# -# This section orders the loading of the modules. Modules -# listed here will get loaded BEFORE the later sections like -# authorize, authenticate, etc. get examined. -# -# This section is not strictly needed. When a section like -# authorize refers to a module, it's automatically loaded and -# initialized. However, some modules may not be listed in any -# of the following sections, so they can be listed here. -# -# Also, listing modules here ensures that you have control over -# the order in which they are initalized. If one module needs -# something defined by another module, you can list them in order -# here, and ensure that the configuration will be OK. -# -instantiate { - # - # Allows the execution of external scripts. - # The entire command line (and output) must fit into 253 bytes. - # - # e.g. Framed-Pool = `%{exec:/bin/echo foo}` -# exec - - # - # The expression module doesn't do authorization, - # authentication, or accounting. It only does dynamic - # translation, of the form: - # - # Session-Timeout = `%{expr:2 + 3}` - # - # So the module needs to be instantiated, but CANNOT be - # listed in any other section. See 'doc/rlm_expr' for - # more information. - # -# expr - - # - # We add the counter module here so that it registers - # the check-name attribute before any module which sets - # it -# daily -} - -# Authorization. First preprocess (hints and huntgroups files), -# then realms, and finally look in the "users" file. -# -# The order of the realm modules will determine the order that -# we try to find a matching realm. -# -# Make *sure* that 'preprocess' comes before any realm if you -# need to setup hints for the remote radius server -authorize { - # - # The preprocess module takes care of sanitizing some bizarre - # attributes in the request, and turning them into attributes - # which are more standard. - # - # It takes care of processing the 'raddb/hints' and the - # 'raddb/huntgroups' files. - # - # It also adds the %{Client-IP-Address} attribute to the request. - preprocess - - # - # If you want to have a log of authentication requests, - # un-comment the following line, and the 'detail auth_log' - # section, above. -# auth_log - -# attr_filter - - # - # The chap module will set 'Auth-Type := CHAP' if we are - # handling a CHAP request and Auth-Type has not already been set -# chap - - # - # If the users are logging in with an MS-CHAP-Challenge - # attribute for authentication, the mschap module will find - # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP' - # to the request, which will cause the server to then use - # the mschap module for authentication. -# mschap - - # - # If you have a Cisco SIP server authenticating against - # FreeRADIUS, uncomment the following line, and the 'digest' - # line in the 'authenticate' section. -# digest - - # - # Look for IPASS style 'realm/', and if not found, look for - # '@realm', and decide whether or not to proxy, based on - # that. -# IPASS - - # - # If you are using multiple kinds of realms, you probably - # want to set "ignore_null = yes" for all of them. - # Otherwise, when the first style of realm doesn't match, - # the other styles won't be checked. - # - suffix -# ntdomain - - # - # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP - # authentication. - # - # It also sets the EAP-Type attribute in the request - # attribute list to the EAP type from the packet. - eap - - # - # Read the 'users' file -# files - - # - # Look in an SQL database. The schema of the database - # is meant to mirror the "users" file. - # - # See "Authorization Queries" in sql.conf -# sql - - # - # If you are using /etc/smbpasswd, and are also doing - # mschap authentication, the un-comment this line, and - # configure the 'etc_smbpasswd' module, above. -# etc_smbpasswd - - # - # The ldap module will set Auth-Type to LDAP if it has not - # already been set - ldap - - # - # Enforce daily limits on time spent logged in. -# daily - - # - # Use the checkval module -# checkval - - # The ldap module will set Auth-Type to LDAP if it has not already - # been set - ldap -} - - -# Authentication. -# -# -# This section lists which modules are available for authentication. -# Note that it does NOT mean 'try each module in order'. It means -# that a module from the 'authorize' section adds a configuration -# attribute 'Auth-Type := FOO'. That authentication type is then -# used to pick the apropriate module from the list below. -# - -# In general, you SHOULD NOT set the Auth-Type attribute. The server -# will figure it out on its own, and will do the right thing. The -# most common side effect of erroneously setting the Auth-Type -# attribute is that one authentication method will work, but the -# others will not. -# -# The common reasons to set the Auth-Type attribute by hand -# is to either forcibly reject the user, or forcibly accept him. -# -authenticate { - # - # PAP authentication, when a back-end database listed - # in the 'authorize' section supplies a password. The - # password can be clear-text, or encrypted. -# Auth-Type PAP { -# pap -# } - - # - # Most people want CHAP authentication - # A back-end database listed in the 'authorize' section - # MUST supply a CLEAR TEXT password. Encrypted passwords - # won't work. -# Auth-Type CHAP { -# chap -# } - - # - # MSCHAP authentication. -# Auth-Type MS-CHAP { -# mschap -# } - - # - # If you have a Cisco SIP server authenticating against - # FreeRADIUS, uncomment the following line, and the 'digest' - # line in the 'authorize' section. -# digest - - # - # Pluggable Authentication Modules. -# pam - - # - # See 'man getpwent' for information on how the 'unix' - # module checks the users password. Note that packets - # containing CHAP-Password attributes CANNOT be authenticated - # against /etc/passwd! See the FAQ for details. - # -# unix - - # Uncomment it if you want to use ldap for authentication - # - # Note that this means "check plain-text password against - # the ldap database", which means that EAP won't work, - # as it does not supply a plain-text password. - Auth-Type LDAP { - ldap - } - - # - # Allow EAP authentication. - eap -} - - -# -# Pre-accounting. Decide which accounting type to use. -# -preacct { -# preprocess - - # - # Ensure that we have a semi-unique identifier for every - # request, and many NAS boxes are broken. -# acct_unique - - # - # Look for IPASS-style 'realm/', and if not found, look for - # '@realm', and decide whether or not to proxy, based on - # that. - # - # Accounting requests are generally proxied to the same - # home server as authentication requests. -# IPASS -# suffix -# ntdomain - - # - # Read the 'acct_users' file -# files -} - -# -# Accounting. Log the accounting data. -# -accounting { - # - # Create a 'detail'ed log of the packets. - # Note that accounting requests which are proxied - # are also logged in the detail file. - detail -# daily - - # Update the wtmp file - # - # If you don't use "radlast", you can delete this line. -# unix - - # - # For Simultaneous-Use tracking. - # - # Due to packet losses in the network, the data here - # may be incorrect. There is little we can do about it. -# radutmp -# sradutmp - - # Return an address to the IP Pool when we see a stop record. -# main_pool - - # - # Log traffic to an SQL database. - # - # See "Accounting queries" in sql.conf -# sql - - # - # Instead of sending the query to the SQL server, - # write it into a log file. - # -# sql_log - - # Cisco VoIP specific bulk accounting -# pgsql-voip - -} - - -# Session database, used for checking Simultaneous-Use. Either the radutmp -# or rlm_sql module can handle this. -# The rlm_sql module is *much* faster -session { -# radutmp - - # - # See "Simultaneous Use Checking Querie" in sql.conf -# sql -} - - -# Post-Authentication -# Once we KNOW that the user has been authenticated, there are -# additional steps we can take. -post-auth { - # Get an address from the IP Pool. -# main_pool - - # - # If you want to have a log of authentication replies, - # un-comment the following line, and the 'detail reply_log' - # section, above. - reply_log - - # - # After authenticating the user, do another SQL query. - # - # See "Authentication Logging Queries" in sql.conf -# sql - - # - # Instead of sending the query to the SQL server, - # write it into a log file. - # -# sql_log - - # - # Un-comment the following if you have set - # 'edir_account_policy_check = yes' in the ldap module sub-section of - # the 'modules' section. - # -# ldap - # - # Access-Reject packets are sent through the REJECT sub-section of the - # post-auth section. - # Uncomment the following and set the module name to the ldap instance - # name if you have set 'edir_account_policy_check = yes' in the ldap - # module sub-section of the 'modules' section. - # -# Post-Auth-Type REJECT { -# insert-module-name-here -# } - -} - -# -# When the server decides to proxy a request to a home server, -# the proxied request is first passed through the pre-proxy -# stage. This stage can re-write the request, or decide to -# cancel the proxy. -# -# Only a few modules currently have this method. -# -pre-proxy { -# attr_rewrite - - # Uncomment the following line if you want to change attributes - # as defined in the preproxy_users file. -# files - - # If you want to have a log of packets proxied to a home - # server, un-comment the following line, and the - # 'detail pre_proxy_log' section, above. - pre_proxy_log -} - -# -# When the server receives a reply to a request it proxied -# to a home server, the request may be massaged here, in the -# post-proxy stage. -# -post-proxy { - - # If you want to have a log of replies from a home server, - # un-comment the following line, and the 'detail post_proxy_log' - # section, above. - post_proxy_log - -# attr_rewrite - - # Uncomment the following line if you want to filter replies from - # remote proxies based on the rules defined in the 'attrs' file. - -# attr_filter - - # - # If you are proxying LEAP, you MUST configure the EAP - # module, and you MUST list it here, in the post-proxy - # stage. - # - # You MUST also use the 'nostrip' option in the 'realm' - # configuration. Otherwise, the User-Name attribute - # in the proxied request will not match the user name - # hidden inside of the EAP packet, and the end server will - # reject the EAP request. - # - eap -} diff --git a/src/functions.sh b/src/functions.sh index 9040822..b1718c4 100644 --- a/src/functions.sh +++ b/src/functions.sh @@ -1066,51 +1066,15 @@ upgrade_amavis () { /etc/init.d/amavis restart } -# handle freerdius config files upgrade +# handle freerdius upgrade upgrade_freeradius () { local template config_new password realm hostname basedn pkg freeradius-aai lt 2.1.3-0lenny0 || return 0 - # handle static configs - restore_file /etc/freeradius/clients.conf - restore_file /etc/freeradius/hints - restore_file /etc/freeradius/ldap.attrmap - - # handle template based configs - basedn=$(sed -n '/^[[:space:]]*suffix[[:space:]]*/ { - s///; s/"//g; p; q }' /etc/ldap/slapd.conf) - hostname=$(hostname -f) - config_new=$(copy_template /etc/freeradius/radiusd.conf) - sed -i "s/#HOSTNAME#/$hostname/" $config_new - sed -i "s/#BASEDN#/$basedn/" $config_new - restore_file /etc/freeradius/radiusd.conf $config_new - rm -f $config_new - - password=$(grep -s '^[[:space:]]*private_key_password[[:space:]]*=' \ - /etc/freeradius/eap.conf) - config_new=$(copy_template /etc/freeradius/eap.conf) - sed -i "s/.*#PASSWORD#.*/$password/" $config_new - restore_file /etc/freeradius/eap.conf $config_new - rm -f $config_new - - realm=$(sed -n '/^[[:space:]]*suffix[[:space:]]*/ { - s///; s/"//g; s/,dc=/./g; s/dc=//; s/.hr$//; p; q }' /etc/ldap/slapd.conf) - config_new=$(copy_template /etc/freeradius/proxy.conf) - sed -i "s/#REALM#/$realm/" $config_new - restore_file /etc/freeradius/proxy.conf $config_new - rm -f $config_new - - # install the new packages - if ! apt-get -y install freeradius; then - # freeradius upgrade fails here, try to fix it by creating certificates - [ -x /etc/freeradius/certs/bootstrap ] && /etc/freeradius/certs/bootstrap - - dpkg --configure -a - apt-get -y -f install - fi - - # finally try to cleanup this mess + # aai team prevents a clean lenny upgrade + cp -av /etc/freeradius /etc/freeradius.$backup_ext + pkgrm freeradius-aai freeradius-ldap freeradius pkgadd freeradius-aai }