--- /dev/null
+#! /bin/sh
+
+###############################################################################
+# Run the PCRE2 tests using the pcre2test program. The appropriate tests are
+# selected, depending on which build-time options were used.
+#
+# When JIT support is available, all appropriate tests are run with and without
+# JIT, unless "-nojit" is given on the command line. There are also two tests
+# for JIT-specific features, one to be run when JIT support is available
+# (unless "-nojit" is specified), and one when it is not.
+#
+# Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also
+# possible to select which to test by giving "-8", "-16" or "-32" on the
+# command line.
+#
+# As well as "-nojit", "-8", "-16", and "-32", arguments for this script are
+# individual test numbers, ranges of tests such as 3-6 or 3- (meaning 3 to the
+# end), or a number preceded by ~ to exclude a test. For example, "3-15 ~10"
+# runs tests 3 to 15, excluding test 10, and just "~10" runs all the tests
+# except test 10. Whatever order the arguments are in, the tests are always run
+# in numerical order.
+#
+# Inappropriate tests are automatically skipped (with a comment to say so). For
+# example, if JIT support is not compiled, test 16 is skipped, whereas if JIT
+# support is compiled, test 15 is skipped.
+#
+# Other arguments can be one of the words "-valgrind", "-valgrind-log", or
+# "-sim" followed by an argument to run cross-compiled executables under a
+# simulator, for example:
+#
+# RunTest 3 -sim "qemu-arm -s 8388608"
+#
+# For backwards compatibility, -nojit, -valgrind, -valgrind-log, and -sim may
+# be given without the leading "-" character.
+#
+# When PCRE2 is compiled by clang with -fsanitize arguments, some tests need
+# very much more stack than normal. In environments where the stack can be
+# set at runtime, -bigstack sets a gigantic stack.
+#
+# There are two special cases where only one argument is allowed:
+#
+# If the first and only argument is "ebcdic", the script runs the special
+# EBCDIC test that can be useful for checking certain EBCDIC features, even
+# when run in an ASCII environment. PCRE2 must be built with EBCDIC support for
+# this test to be run.
+#
+# If the script is obeyed as "RunTest list", a list of available tests is
+# output, but none of them are run.
+###############################################################################
+
+# Define test titles in variables so that they can be output as a list. Some
+# of them are modified (e.g. with -8 or -16) when used in the actual tests.
+
+title0="Test 0: Unchecked pcre2test argument tests (to improve coverage)"
+title1="Test 1: Main non-UTF, non-UCP functionality (compatible with Perl >= 5.10)"
+title2="Test 2: API, errors, internals and non-Perl stuff"
+title3="Test 3: Locale-specific features"
+title4A="Test 4: UTF"
+title4B=" and Unicode property support (compatible with Perl >= 5.10)"
+title5A="Test 5: API, internals, and non-Perl stuff for UTF"
+title5B=" and UCP support"
+title6="Test 6: DFA matching main non-UTF, non-UCP functionality"
+title7A="Test 7: DFA matching with UTF"
+title7B=" and Unicode property support"
+title8="Test 8: Internal offsets and code size tests"
+title9="Test 9: Specials for the basic 8-bit library"
+title10="Test 10: Specials for the 8-bit library with UTF-8 and UCP support"
+title11="Test 11: Specials for the basic 16-bit and 32-bit libraries"
+title12="Test 12: Specials for the 16-bit and 32-bit libraries UTF and UCP support"
+title13="Test 13: DFA specials for the basic 16-bit and 32-bit libraries"
+title14="Test 14: DFA specials for UTF and UCP support"
+title15="Test 15: Non-JIT limits and other non-JIT tests"
+title16="Test 16: JIT-specific features when JIT is not available"
+title17="Test 17: JIT-specific features when JIT is available"
+title18="Test 18: Tests of the POSIX interface, excluding UTF/UCP"
+title19="Test 19: Tests of the POSIX interface with UTF/UCP"
+title20="Test 20: Serialization and code copy tests"
+title21="Test 21: \C tests without UTF (supported for DFA matching)"
+title22="Test 22: \C tests with UTF (not supported for DFA matching)"
+title23="Test 23: \C disabled test"
+title24="Test 24: Non-UTF pattern conversion tests"
+title25="Test 25: UTF pattern conversion tests"
+maxtest=25
+
+if [ $# -eq 1 -a "$1" = "list" ]; then
+ echo $title0
+ echo $title1
+ echo $title2 "(not UTF or UCP)"
+ echo $title3
+ echo $title4A $title4B
+ echo $title5A $title5B
+ echo $title6
+ echo $title7A $title7B
+ echo $title8
+ echo $title9
+ echo $title10
+ echo $title11
+ echo $title12
+ echo $title13
+ echo $title14
+ echo $title15
+ echo $title16
+ echo $title17
+ echo $title18
+ echo $title19
+ echo $title20
+ echo $title21
+ echo $title22
+ echo $title23
+ echo $title24
+ echo $title25
+ exit 0
+fi
+
+# Set up a suitable "diff" command for comparison. Some systems
+# have a diff that lacks a -u option. Try to deal with this.
+
+cf="diff"
+diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u"
+
+# Find the test data
+
+if [ -n "$srcdir" -a -d "$srcdir" ] ; then
+ testdata="$srcdir/testdata"
+elif [ -d "./testdata" ] ; then
+ testdata=./testdata
+elif [ -d "../testdata" ] ; then
+ testdata=../testdata
+else
+ echo "Cannot find the testdata directory"
+ exit 1
+fi
+
+
+# ------ Function to check results of a test -------
+
+# This function is called with three parameters:
+#
+# $1 the value of $? after a call to pcre2test
+# $2 the suffix of the output file to compare with
+# $3 the $opt value (empty, -jit, or -dfa)
+#
+# Note: must define using name(), not "function name", for Solaris.
+
+checkresult()
+ {
+ if [ $1 -ne 0 ] ; then
+ echo "** pcre2test failed - check testtry"
+ exit 1
+ fi
+ case "$3" in
+ -jit) with=" with JIT";;
+ -dfa) with=" with DFA";;
+ *) with="";;
+ esac
+ $cf $testdata/testoutput$2 testtry
+ if [ $? != 0 ] ; then
+ echo ""
+ echo "** Test $2 failed$with"
+ exit 1
+ fi
+ echo " OK$with"
+ }
+
+
+# ------ Function to run and check a special pcre2test arguments test -------
+
+checkspecial()
+ {
+ $valgrind $vjs ./pcre2test $1 >>testtry
+ if [ $? -ne 0 ] ; then
+ echo "** pcre2test $1 failed - check testtry"
+ exit 1
+ fi
+ }
+
+
+# ------ Special EBCDIC Test -------
+
+if [ $# -eq 1 -a "$1" = "ebcdic" ]; then
+ $valgrind ./pcre2test -C ebcdic >/dev/null
+ ebcdic=$?
+ if [ $ebcdic -ne 1 ] ; then
+ echo "Cannot run EBCDIC tests: EBCDIC support not compiled"
+ exit 1
+ fi
+ for opt in "" "-dfa"; do
+ ./pcre2test -q $opt $testdata/testinputEBC >testtry
+ checkresult $? EBC "$opt"
+ done
+exit 0
+fi
+
+
+# ------ Normal Tests ------
+
+# Default values
+
+arg8=
+arg16=
+arg32=
+nojit=
+bigstack=
+sim=
+skip=
+valgrind=
+vjs=
+
+# This is in case the caller has set aliases (as I do - PH)
+unset cp ls mv rm
+
+# Process options and select which tests to run; for those that are explicitly
+# requested, check that the necessary optional facilities are available.
+
+do0=no
+do1=no
+do2=no
+do3=no
+do4=no
+do5=no
+do6=no
+do7=no
+do8=no
+do9=no
+do10=no
+do11=no
+do12=no
+do13=no
+do14=no
+do15=no
+do16=no
+do17=no
+do18=no
+do19=no
+do20=no
+do21=no
+do22=no
+do23=no
+do24=no
+do25=no
+
+while [ $# -gt 0 ] ; do
+ case $1 in
+ 0) do0=yes;;
+ 1) do1=yes;;
+ 2) do2=yes;;
+ 3) do3=yes;;
+ 4) do4=yes;;
+ 5) do5=yes;;
+ 6) do6=yes;;
+ 7) do7=yes;;
+ 8) do8=yes;;
+ 9) do9=yes;;
+ 10) do10=yes;;
+ 11) do11=yes;;
+ 12) do12=yes;;
+ 13) do13=yes;;
+ 14) do14=yes;;
+ 15) do15=yes;;
+ 16) do16=yes;;
+ 17) do17=yes;;
+ 18) do18=yes;;
+ 19) do19=yes;;
+ 20) do20=yes;;
+ 21) do21=yes;;
+ 22) do22=yes;;
+ 23) do23=yes;;
+ 24) do24=yes;;
+ 25) do25=yes;;
+ -8) arg8=yes;;
+ -16) arg16=yes;;
+ -32) arg32=yes;;
+ bigstack|-bigstack) bigstack=yes;;
+ nojit|-nojit) nojit=yes;;
+ sim|-sim) shift; sim=$1;;
+ valgrind|-valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all-non-file";;
+ valgrind-log|-valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all-non-file --log-file=report.%p ";;
+ ~*)
+ if expr "$1" : '~[0-9][0-9]*$' >/dev/null; then
+ skip="$skip `expr "$1" : '~\([0-9]*\)*$'`"
+ else
+ echo "Unknown option or test selector '$1'"; exit 1
+ fi
+ ;;
+ *-*)
+ if expr "$1" : '[0-9][0-9]*-[0-9]*$' >/dev/null; then
+ tf=`expr "$1" : '\([0-9]*\)'`
+ tt=`expr "$1" : '.*-\([0-9]*\)'`
+ if [ "$tt" = "" ] ; then tt=$maxtest; fi
+ if expr \( "$tt" ">" "$maxtest" \) >/dev/null; then
+ echo "Invalid test range '$1'"; exit 1
+ fi
+ while expr "$tf" "<=" "$tt" >/dev/null; do
+ eval do${tf}=yes
+ tf=`expr $tf + 1`
+ done
+ else
+ echo "Invalid test range '$1'"; exit 1
+ fi
+ ;;
+ *) echo "Unknown option or test selector '$1'"; exit 1;;
+ esac
+ shift
+done
+
+# Find which optional facilities are available.
+
+$sim ./pcre2test -C linksize >/dev/null
+link_size=$?
+if [ $link_size -lt 2 ] ; then
+ echo "RunTest: Failed to find internal link size"
+ exit 1
+fi
+if [ $link_size -gt 4 ] ; then
+ echo "RunTest: Failed to find internal link size"
+ exit 1
+fi
+
+# If it is possible to set the system stack size and -bigstack was given,
+# set up a large stack.
+
+$sim ./pcre2test -S 1 /dev/null /dev/null
+if [ $? -eq 0 -a "$bigstack" != "" ] ; then
+ setstack="-S 64"
+else
+ setstack=""
+fi
+
+# All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only
+# one need be.
+
+$sim ./pcre2test -C pcre2-8 >/dev/null
+support8=$?
+$sim ./pcre2test -C pcre2-16 >/dev/null
+support16=$?
+$sim ./pcre2test -C pcre2-32 >/dev/null
+support32=$?
+
+# \C may be disabled
+
+$sim ./pcre2test -C backslash-C >/dev/null
+supportBSC=$?
+
+# Initialize all bitsizes skipped
+
+test8=skip
+test16=skip
+test32=skip
+
+# If no bitsize arguments, select all that are available
+
+if [ "$arg8$arg16$arg32" = "" ] ; then
+ if [ $support8 -ne 0 ] ; then
+ test8=-8
+ fi
+ if [ $support16 -ne 0 ] ; then
+ test16=-16
+ fi
+ if [ $support32 -ne 0 ] ; then
+ test32=-32
+ fi
+
+# Otherwise, select requested bit sizes
+
+else
+ if [ "$arg8" = yes ] ; then
+ if [ $support8 -eq 0 ] ; then
+ echo "Cannot run 8-bit library tests: 8-bit library not compiled"
+ exit 1
+ fi
+ test8=-8
+ fi
+ if [ "$arg16" = yes ] ; then
+ if [ $support16 -eq 0 ] ; then
+ echo "Cannot run 16-bit library tests: 16-bit library not compiled"
+ exit 1
+ fi
+ test16=-16
+ fi
+ if [ "$arg32" = yes ] ; then
+ if [ $support32 -eq 0 ] ; then
+ echo "Cannot run 32-bit library tests: 32-bit library not compiled"
+ exit 1
+ fi
+ test32=-32
+ fi
+fi
+
+# UTF support is implied by Unicode support, and it always applies to all bit
+# sizes if both are supported; we can't have UTF-8 support without UTF-16 or
+# UTF-32 support.
+
+$sim ./pcre2test -C unicode >/dev/null
+utf=$?
+
+# When JIT is used with valgrind, we need to set up valgrind suppressions as
+# otherwise there are a lot of false positive valgrind reports when the
+# the hardware supports SSE2.
+
+jitopt=
+$sim ./pcre2test -C jit >/dev/null
+jit=$?
+if [ $jit -ne 0 -a "$nojit" != "yes" ] ; then
+ jitopt=-jit
+ if [ "$valgrind" != "" ] ; then
+ vjs="--suppressions=$testdata/valgrind-jit.supp"
+ fi
+fi
+
+# If no specific tests were requested, select all. Those that are not
+# relevant will be automatically skipped.
+
+if [ $do0 = no -a $do1 = no -a $do2 = no -a $do3 = no -a \
+ $do4 = no -a $do5 = no -a $do6 = no -a $do7 = no -a \
+ $do8 = no -a $do9 = no -a $do10 = no -a $do11 = no -a \
+ $do12 = no -a $do13 = no -a $do14 = no -a $do15 = no -a \
+ $do16 = no -a $do17 = no -a $do18 = no -a $do19 = no -a \
+ $do20 = no -a $do21 = no -a $do22 = no -a $do23 = no -a \
+ $do24 = no -a $do25 = no \
+ ]; then
+ do0=yes
+ do1=yes
+ do2=yes
+ do3=yes
+ do4=yes
+ do5=yes
+ do6=yes
+ do7=yes
+ do8=yes
+ do9=yes
+ do10=yes
+ do11=yes
+ do12=yes
+ do13=yes
+ do14=yes
+ do15=yes
+ do16=yes
+ do17=yes
+ do18=yes
+ do19=yes
+ do20=yes
+ do21=yes
+ do22=yes
+ do23=yes
+ do24=yes
+ do25=yes
+fi
+
+# Handle any explicit skips at this stage, so that an argument list may consist
+# only of explicit skips.
+
+for i in $skip; do eval do$i=no; done
+
+# Show which release and which test data
+
+echo ""
+echo PCRE2 C library tests using test data from $testdata
+$sim ./pcre2test /dev/null
+echo ""
+
+for bmode in "$test8" "$test16" "$test32"; do
+ case "$bmode" in
+ skip) continue;;
+ -16) if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi
+ bits=16; echo "---- Testing 16-bit library ----"; echo "";;
+ -32) if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi
+ bits=32; echo "---- Testing 32-bit library ----"; echo "";;
+ -8) bits=8; echo "---- Testing 8-bit library ----"; echo "";;
+ esac
+
+ # Test 0 is a special test. Its output is not checked, because it will
+ # be different on different hardware and with different configurations.
+ # Running this test just exercises the code.
+
+ if [ $do0 = yes ] ; then
+ echo $title0
+ echo '/abc/jit,memory,framesize' >testSinput
+ echo ' abc' >>testSinput
+ echo '' >testtry
+ checkspecial '-C'
+ checkspecial '--help'
+ checkspecial '-S 1 -t 10 testSinput'
+ echo " OK"
+ fi
+
+ # Primary non-UTF test, compatible with JIT and all versions of Perl >= 5.8
+
+ if [ $do1 = yes ] ; then
+ echo $title1
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput1 testtry
+ checkresult $? 1 "$opt"
+ done
+ fi
+
+ # PCRE2 tests that are not Perl-compatible: API, errors, internals
+
+ if [ $do2 = yes ] ; then
+ echo $title2 "(excluding UTF-$bits)"
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput2 testtry
+ if [ $? = 0 ] ; then
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $bmode $opt -error -70,-62,-2,-1,0,100,101,191,200 >>testtry
+ checkresult $? 2 "$opt"
+ fi
+ done
+ fi
+
+ # Locale-specific tests, provided that either the "fr_FR", "fr_CA", "french"
+ # or "fr" locale is available. The first two are Unix-like standards; the
+ # last two are for Windows. Unfortunately, different versions of the French
+ # locale give different outputs for some items. This test passes if the
+ # output matches any one of the alternative output files.
+
+ if [ $do3 = yes ] ; then
+ locale=
+
+ # In some environments locales that are listed by the "locale -a"
+ # command do not seem to work with setlocale(). Therefore, we do
+ # a preliminary test to see if pcre2test can set one before going
+ # on to use it.
+
+ for loc in 'fr_FR' 'french' 'fr' 'fr_CA'; do
+ locale -a | grep "^$loc\$" >/dev/null
+ if [ $? -eq 0 ] ; then
+ echo "/a/locale=$loc" | \
+ $sim $valgrind ./pcre2test -q $bmode | \
+ grep "Failed to set locale" >/dev/null
+ if [ $? -ne 0 ] ; then
+ locale=$loc
+ if [ "$locale" = "fr_FR" ] ; then
+ infile=$testdata/testinput3
+ outfile=$testdata/testoutput3
+ outfile2=$testdata/testoutput3A
+ outfile3=$testdata/testoutput3B
+ else
+ infile=test3input
+ outfile=test3output
+ outfile2=test3outputA
+ outfile3=test3outputB
+ sed "s/fr_FR/$loc/" $testdata/testinput3 >test3input
+ sed "s/fr_FR/$loc/" $testdata/testoutput3 >test3output
+ sed "s/fr_FR/$loc/" $testdata/testoutput3A >test3outputA
+ sed "s/fr_FR/$loc/" $testdata/testoutput3B >test3outputB
+ fi
+ break
+ fi
+ fi
+ done
+
+ if [ "$locale" != "" ] ; then
+ echo $title3 "(using '$locale' locale)"
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $infile testtry
+ if [ $? = 0 ] ; then
+ case "$opt" in
+ -jit) with=" with JIT";;
+ *) with="";;
+ esac
+ if $cf $outfile testtry >teststdout || \
+ $cf $outfile2 testtry >teststdout || \
+ $cf $outfile3 testtry >teststdout
+ then
+ echo " OK$with"
+ else
+ echo "** Locale test did not run successfully$with. The output did not match"
+ echo " $outfile, $outfile2 or $outfile3."
+ echo " This may mean that there is a problem with the locale settings rather"
+ echo " than a bug in PCRE2."
+ exit 1
+ fi
+ else exit 1
+ fi
+ done
+ else
+ echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr_CA',"
+ echo "'fr' or 'french' locales can be set, or the \"locale\" command is"
+ echo "not available to check for them."
+ echo " "
+ fi
+ fi
+
+ # Tests for UTF and Unicode property support
+
+ if [ $do4 = yes ] ; then
+ echo ${title4A}-${bits}${title4B}
+ if [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput4 testtry
+ checkresult $? 4 "$opt"
+ done
+ fi
+ fi
+
+ if [ $do5 = yes ] ; then
+ echo ${title5A}-${bits}$title5B
+ if [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput5 testtry
+ checkresult $? 5 "$opt"
+ done
+ fi
+ fi
+
+ # Tests for DFA matching support
+
+ if [ $do6 = yes ] ; then
+ echo $title6
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput6 testtry
+ checkresult $? 6 ""
+ fi
+
+ if [ $do7 = yes ] ; then
+ echo ${title7A}-${bits}$title7B
+ if [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $opt $testdata/testinput7 testtry
+ checkresult $? 7 ""
+ fi
+ fi
+
+ # Test of internal offsets and code sizes. This test is run only when there
+ # is UTF/UCP support. The actual tests are mostly the same as in some of the
+ # above, but in this test we inspect some offsets and sizes. This is a
+ # doublecheck for the maintainer, just in case something changes unexpectely.
+ # The output from this test is different in 8-bit, 16-bit, and 32-bit modes
+ # and for different link sizes, so there are different output files for each
+ # mode and link size.
+
+ if [ $do8 = yes ] ; then
+ echo $title8
+ if [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput8 testtry
+ checkresult $? 8-$bits-$link_size ""
+ fi
+ fi
+
+ # Tests for 8-bit-specific features
+
+ if [ "$do9" = yes ] ; then
+ echo $title9
+ if [ "$bits" = "16" -o "$bits" = "32" ] ; then
+ echo " Skipped when running 16/32-bit tests"
+ else
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput9 testtry
+ checkresult $? 9 "$opt"
+ done
+ fi
+ fi
+
+ # Tests for UTF-8 and UCP 8-bit-specific features
+
+ if [ "$do10" = yes ] ; then
+ echo $title10
+ if [ "$bits" = "16" -o "$bits" = "32" ] ; then
+ echo " Skipped when running 16/32-bit tests"
+ elif [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput10 testtry
+ checkresult $? 10 "$opt"
+ done
+ fi
+ fi
+
+ # Tests for 16-bit and 32-bit features. Output is different for the two widths.
+
+ if [ $do11 = yes ] ; then
+ echo $title11
+ if [ "$bits" = "8" ] ; then
+ echo " Skipped when running 8-bit tests"
+ else
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput11 testtry
+ checkresult $? 11-$bits "$opt"
+ done
+ fi
+ fi
+
+ # Tests for 16-bit and 32-bit features with UTF-16/32 and UCP support. Output
+ # is different for the two widths.
+
+ if [ $do12 = yes ] ; then
+ echo $title12
+ if [ "$bits" = "8" ] ; then
+ echo " Skipped when running 8-bit tests"
+ elif [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput12 testtry
+ checkresult $? 12-$bits "$opt"
+ done
+ fi
+ fi
+
+ # Tests for 16/32-bit-specific features in DFA non-UTF modes
+
+ if [ $do13 = yes ] ; then
+ echo $title13
+ if [ "$bits" = "8" ] ; then
+ echo " Skipped when running 8-bit tests"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput13 testtry
+ checkresult $? 13 ""
+ fi
+ fi
+
+ # Tests for DFA UTF and UCP features. Output is different for the different widths.
+
+ if [ $do14 = yes ] ; then
+ echo $title14
+ if [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $opt $testdata/testinput14 testtry
+ checkresult $? 14-$bits ""
+ fi
+ fi
+
+ # Test non-JIT match and recursion limits
+
+ if [ $do15 = yes ] ; then
+ echo $title15
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput15 testtry
+ checkresult $? 15 ""
+ fi
+
+ # Test JIT-specific features when JIT is not available
+
+ if [ $do16 = yes ] ; then
+ echo $title16
+ if [ $jit -ne 0 ] ; then
+ echo " Skipped because JIT is available"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput16 testtry
+ checkresult $? 16 ""
+ fi
+ fi
+
+ # Test JIT-specific features when JIT is available
+
+ if [ $do17 = yes ] ; then
+ echo $title17
+ if [ $jit -eq 0 -o "$nojit" = "yes" ] ; then
+ echo " Skipped because JIT is not available or nojit was specified"
+ else
+ $sim $valgrind $vjs ./pcre2test -q $setstack $bmode $testdata/testinput17 testtry
+ checkresult $? 17 ""
+ fi
+ fi
+
+ # Tests for the POSIX interface without UTF/UCP (8-bit only)
+
+ if [ $do18 = yes ] ; then
+ echo $title18
+ if [ "$bits" = "16" -o "$bits" = "32" ] ; then
+ echo " Skipped when running 16/32-bit tests"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput18 testtry
+ checkresult $? 18 ""
+ fi
+ fi
+
+ # Tests for the POSIX interface with UTF/UCP (8-bit only)
+
+ if [ $do19 = yes ] ; then
+ echo $title19
+ if [ "$bits" = "16" -o "$bits" = "32" ] ; then
+ echo " Skipped when running 16/32-bit tests"
+ elif [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput19 testtry
+ checkresult $? 19 ""
+ fi
+ fi
+
+ # Serialization tests
+
+ if [ $do20 = yes ] ; then
+ echo $title20
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput20 testtry
+ checkresult $? 20 ""
+ fi
+
+ # \C tests without UTF - DFA matching is supported
+
+ if [ "$do21" = yes ] ; then
+ echo $title21
+ if [ $supportBSC -eq 0 ] ; then
+ echo " Skipped because \C is disabled"
+ else
+ for opt in "" $jitopt -dfa; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput21 testtry
+ checkresult $? 21 "$opt"
+ done
+ fi
+ fi
+
+ # \C tests with UTF - DFA matching is not supported for \C in UTF mode
+
+ if [ "$do22" = yes ] ; then
+ echo $title22
+ if [ $supportBSC -eq 0 ] ; then
+ echo " Skipped because \C is disabled"
+ elif [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ for opt in "" $jitopt; do
+ $sim $valgrind ${opt:+$vjs} ./pcre2test -q $setstack $bmode $opt $testdata/testinput22 testtry
+ checkresult $? 22-$bits "$opt"
+ done
+ fi
+ fi
+
+ # Test when \C is disabled
+
+ if [ "$do23" = yes ] ; then
+ echo $title23
+ if [ $supportBSC -ne 0 ] ; then
+ echo " Skipped because \C is not disabled"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput23 testtry
+ checkresult $? 23 ""
+ fi
+ fi
+
+ # Non-UTF pattern conversion tests
+
+ if [ "$do24" = yes ] ; then
+ echo $title24
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput24 testtry
+ checkresult $? 24 ""
+ fi
+
+ # UTF pattern conversion tests
+
+ if [ "$do25" = yes ] ; then
+ echo $title25
+ if [ $utf -eq 0 ] ; then
+ echo " Skipped because UTF-$bits support is not available"
+ else
+ $sim $valgrind ./pcre2test -q $setstack $bmode $testdata/testinput25 testtry
+ checkresult $? 25 ""
+ fi
+ fi
+
+# End of loop for 8/16/32-bit tests
+done
+
+# Clean up local working files
+rm -f testSinput test3input testsaved1 testsaved2 test3output test3outputA test3outputB teststdout teststderr testtry
+
+# End
projects / ossec-hids.git / blobdiff