--- /dev/null
+/* src/config.h.in. Generated from configure.ac by autoheader. */
+
+
+/* PCRE2 is written in Standard C, but there are a few non-standard things it
+can cope with, allowing it to run on SunOS4 and other "close to standard"
+systems.
+
+In environments that support the GNU autotools, config.h.in is converted into
+config.h by the "configure" script. In environments that use CMake,
+config-cmake.in is converted into config.h. If you are going to build PCRE2 "by
+hand" without using "configure" or CMake, you should copy the distributed
+config.h.generic to config.h, and edit the macro definitions to be the way you
+need them. You must then add -DHAVE_CONFIG_H to all of your compile commands,
+so that config.h is included at the start of every source.
+
+Alternatively, you can avoid editing by using -D on the compiler command line
+to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H,
+but if you do, default values will be taken from config.h for non-boolean
+macros that are not defined on the command line.
+
+Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be
+defined (conventionally to 1) for TRUE, and not defined at all for FALSE. All
+such macros are listed as a commented #undef in config.h.generic. Macros such
+as MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are
+surrounded by #ifndef/#endif lines so that the value can be overridden by -D.
+
+PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if
+HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make
+sure both macros are undefined; an emulation function will then be used. */
+
+/* By default, the \R escape sequence matches any Unicode line ending
+ character or sequence of characters. If BSR_ANYCRLF is defined (to any
+ value), this is changed so that backslash-R matches only CR, LF, or CRLF.
+ The build-time default can be overridden by the user of PCRE2 at runtime.
+ */
+#undef BSR_ANYCRLF
+
+/* If you are compiling for a system that uses EBCDIC instead of ASCII
+ character codes, define this macro to any value. When EBCDIC is set, PCRE2
+ assumes that all input strings are in EBCDIC. If you do not define this
+ macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It
+ is not possible to build a version of PCRE2 that supports both EBCDIC and
+ UTF-8/16/32. */
+#undef EBCDIC
+
+/* In an EBCDIC environment, define this macro to any value to arrange for the
+ NL character to be 0x25 instead of the default 0x15. NL plays the role that
+ LF does in an ASCII/Unicode environment. */
+#undef EBCDIC_NL25
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the <bzlib.h> header file. */
+#undef HAVE_BZLIB_H
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <editline/readline.h> header file. */
+#undef HAVE_EDITLINE_READLINE_H
+
+/* Define to 1 if you have the <edit/readline/readline.h> header file. */
+#undef HAVE_EDIT_READLINE_READLINE_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `mkostemp' function. */
+#undef HAVE_MKOSTEMP
+
+/* Define if you have POSIX threads libraries and header files. */
+#undef HAVE_PTHREAD
+
+/* Have PTHREAD_PRIO_INHERIT. */
+#undef HAVE_PTHREAD_PRIO_INHERIT
+
+/* Define to 1 if you have the <readline/history.h> header file. */
+#undef HAVE_READLINE_HISTORY_H
+
+/* Define to 1 if you have the <readline/readline.h> header file. */
+#undef HAVE_READLINE_READLINE_H
+
+/* Define to 1 if you have the `secure_getenv' function. */
+#undef HAVE_SECURE_GETENV
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/wait.h> header file. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if the compiler supports simple visibility declarations. */
+#undef HAVE_VISIBILITY
+
+/* Define to 1 if you have the <windows.h> header file. */
+#undef HAVE_WINDOWS_H
+
+/* Define to 1 if you have the <zlib.h> header file. */
+#undef HAVE_ZLIB_H
+
+/* This limits the amount of memory that may be used while matching a pattern.
+ It applies to both pcre2_match() and pcre2_dfa_match(). It does not apply
+ to JIT matching. The value is in kibibytes (units of 1024 bytes). */
+#undef HEAP_LIMIT
+
+/* The value of LINK_SIZE determines the number of bytes used to store links
+ as offsets within the compiled regex. The default is 2, which allows for
+ compiled patterns up to 65535 code units long. This covers the vast
+ majority of cases. However, PCRE2 can also be compiled to use 3 or 4 bytes
+ instead. This allows for longer patterns in extreme cases. */
+#undef LINK_SIZE
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#undef LT_OBJDIR
+
+/* The value of MATCH_LIMIT determines the default number of times the
+ pcre2_match() function can record a backtrack position during a single
+ matching attempt. The value is also used to limit a loop counter in
+ pcre2_dfa_match(). There is a runtime interface for setting a different
+ limit. The limit exists in order to catch runaway regular expressions that
+ take for ever to determine that they do not match. The default is set very
+ large so that it does not accidentally catch legitimate cases. */
+#undef MATCH_LIMIT
+
+/* The above limit applies to all backtracks, whether or not they are nested.
+ In some environments it is desirable to limit the nesting of backtracking
+ (that is, the depth of tree that is searched) more strictly, in order to
+ restrict the maximum amount of heap memory that is used. The value of
+ MATCH_LIMIT_DEPTH provides this facility. To have any useful effect, it
+ must be less than the value of MATCH_LIMIT. The default is to use the same
+ value as MATCH_LIMIT. There is a runtime method for setting a different
+ limit. In the case of pcre2_dfa_match(), this limit controls the depth of
+ the internal nested function calls that are used for pattern recursions,
+ lookarounds, and atomic groups. */
+#undef MATCH_LIMIT_DEPTH
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+ Care must be taken if it is increased, because it guards against integer
+ overflow caused by enormously large patterns. */
+#undef MAX_NAME_COUNT
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+ Care must be taken if it is increased, because it guards against integer
+ overflow caused by enormously large patterns. */
+#undef MAX_NAME_SIZE
+
+/* Defining NEVER_BACKSLASH_C locks out the use of \C in all patterns. */
+#undef NEVER_BACKSLASH_C
+
+/* The value of NEWLINE_DEFAULT determines the default newline character
+ sequence. PCRE2 client programs can override this by selecting other values
+ at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), 5
+ (ANYCRLF), and 6 (NUL). */
+#undef NEWLINE_DEFAULT
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
+ parentheses (of any kind) in a pattern. This limits the amount of system
+ stack that is used while compiling a pattern. */
+#undef PARENS_NEST_LIMIT
+
+/* The value of PCRE2GREP_BUFSIZE is the starting size of the buffer used by
+ pcre2grep to hold parts of the file it is searching. The buffer will be
+ expanded up to PCRE2GREP_MAX_BUFSIZE if necessary, for files containing
+ very long lines. The actual amount of memory used by pcre2grep is three
+ times this number, because it allows for the buffering of "before" and
+ "after" lines. */
+#undef PCRE2GREP_BUFSIZE
+
+/* The value of PCRE2GREP_MAX_BUFSIZE specifies the maximum size of the buffer
+ used by pcre2grep to hold parts of the file it is searching. The actual
+ amount of memory used by pcre2grep is three times this number, because it
+ allows for the buffering of "before" and "after" lines. */
+#undef PCRE2GREP_MAX_BUFSIZE
+
+/* to make a symbol visible */
+#undef PCRE2POSIX_EXP_DECL
+
+/* to make a symbol visible */
+#undef PCRE2POSIX_EXP_DEFN
+
+/* Define to any value to include debugging code. */
+#undef PCRE2_DEBUG
+
+/* to make a symbol visible */
+#undef PCRE2_EXP_DECL
+
+
+/* If you are compiling for a system other than a Unix-like system or
+ Win32, and it needs some magic to be inserted before the definition
+ of a function that is exported by the library, define this macro to
+ contain the relevant magic. If you do not define this macro, a suitable
+ __declspec value is used for Windows systems; in other environments
+ "extern" is used for a C compiler and "extern C" for a C++ compiler.
+ This macro apears at the start of every exported function that is part
+ of the external API. It does not appear on functions that are "external"
+ in the C sense, but which are internal to the library. */
+#undef PCRE2_EXP_DEFN
+
+/* Define to any value if linking statically (TODO: make nice with Libtool) */
+#undef PCRE2_STATIC
+
+/* Define to necessary symbol if this constant uses a non-standard name on
+ your system. */
+#undef PTHREAD_CREATE_JOINABLE
+
+/* Define to any non-zero number to enable support for SELinux compatible
+ executable memory allocator in JIT. Note that this will have no effect
+ unless SUPPORT_JIT is also defined. */
+#undef SLJIT_PROT_EXECUTABLE_ALLOCATOR
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to any value to enable support for Just-In-Time compiling. */
+#undef SUPPORT_JIT
+
+/* Define to any value to allow pcre2grep to be linked with libbz2, so that it
+ is able to handle .bz2 files. */
+#undef SUPPORT_LIBBZ2
+
+/* Define to any value to allow pcre2test to be linked with libedit. */
+#undef SUPPORT_LIBEDIT
+
+/* Define to any value to allow pcre2test to be linked with libreadline. */
+#undef SUPPORT_LIBREADLINE
+
+/* Define to any value to allow pcre2grep to be linked with libz, so that it
+ is able to handle .gz files. */
+#undef SUPPORT_LIBZ
+
+/* Define to any value to enable callout script support in pcre2grep. */
+#undef SUPPORT_PCRE2GREP_CALLOUT
+
+/* Define to any value to enable JIT support in pcre2grep. Note that this will
+ have no effect unless SUPPORT_JIT is also defined. */
+#undef SUPPORT_PCRE2GREP_JIT
+
+/* Define to any value to enable the 16 bit PCRE2 library. */
+#undef SUPPORT_PCRE2_16
+
+/* Define to any value to enable the 32 bit PCRE2 library. */
+#undef SUPPORT_PCRE2_32
+
+/* Define to any value to enable the 8 bit PCRE2 library. */
+#undef SUPPORT_PCRE2_8
+
+/* Define to any value to enable support for Unicode and UTF encoding. This
+ will work even in an EBCDIC environment, but it is incompatible with the
+ EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or*
+ ASCII/Unicode, but not both at once. */
+#undef SUPPORT_UNICODE
+
+/* Define to any value for valgrind support to find invalid memory reads. */
+#undef SUPPORT_VALGRIND
+
+/* Enable extensions on AIX 3, Interix. */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them. */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris. */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop. */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris. */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+ this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to the type of a signed integer type of width exactly 64 bits if
+ such a type exists and the standard includes do not define it. */
+#undef int64_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
projects / ossec-hids.git / blobdiff