--- /dev/null
+/*************************************************
+* pcre2grep program *
+*************************************************/
+
+/* This is a grep program that uses the 8-bit PCRE regular expression library
+via the PCRE2 updated API to do its pattern matching. On Unix-like, Windows,
+and native z/OS systems it can recurse into directories, and in z/OS it can
+handle PDS files.
+
+Note that for native z/OS, in addition to defining the NATIVE_ZOS macro, an
+additional header is required. That header is not included in the main PCRE2
+distribution because other apparatus is needed to compile pcre2grep for z/OS.
+The header can be found in the special z/OS distribution, which is available
+from www.zaconsultants.net or from www.cbttape.org.
+
+ Copyright (c) 1997-2018 University of Cambridge
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of the University of Cambridge nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <ctype.h>
+#include <locale.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#if (defined _WIN32 || (defined HAVE_WINDOWS_H && HAVE_WINDOWS_H)) \
+ && !defined WIN32 && !defined(__CYGWIN__)
+#define WIN32
+#endif
+
+/* Some cmake's define it still */
+#if defined(__CYGWIN__) && defined(WIN32)
+#undef WIN32
+#endif
+
+#ifdef WIN32
+#include <io.h> /* For _setmode() */
+#include <fcntl.h> /* For _O_BINARY */
+#endif
+
+#ifdef SUPPORT_PCRE2GREP_CALLOUT
+#ifdef WIN32
+#include <process.h>
+#else
+#include <sys/wait.h>
+#endif
+#endif
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef SUPPORT_LIBZ
+#include <zlib.h>
+#endif
+
+#ifdef SUPPORT_LIBBZ2
+#include <bzlib.h>
+#endif
+
+#define PCRE2_CODE_UNIT_WIDTH 8
+#include "pcre2.h"
+
+/* Older versions of MSVC lack snprintf(). This define allows for
+warning/error-free compilation and testing with MSVC compilers back to at least
+MSVC 10/2010. Except for VC6 (which is missing some fundamentals and fails). */
+
+#if defined(_MSC_VER) && (_MSC_VER < 1900)
+#define snprintf _snprintf
+#endif
+
+#define FALSE 0
+#define TRUE 1
+
+typedef int BOOL;
+
+#define OFFSET_SIZE 33
+
+#if BUFSIZ > 8192
+#define MAXPATLEN BUFSIZ
+#else
+#define MAXPATLEN 8192
+#endif
+
+#define FNBUFSIZ 2048
+#define ERRBUFSIZ 256
+
+/* Values for the "filenames" variable, which specifies options for file name
+output. The order is important; it is assumed that a file name is wanted for
+all values greater than FN_DEFAULT. */
+
+enum { FN_NONE, FN_DEFAULT, FN_MATCH_ONLY, FN_NOMATCH_ONLY, FN_FORCE };
+
+/* File reading styles */
+
+enum { FR_PLAIN, FR_LIBZ, FR_LIBBZ2 };
+
+/* Actions for the -d and -D options */
+
+enum { dee_READ, dee_SKIP, dee_RECURSE };
+enum { DEE_READ, DEE_SKIP };
+
+/* Actions for special processing options (flag bits) */
+
+#define PO_WORD_MATCH 0x0001
+#define PO_LINE_MATCH 0x0002
+#define PO_FIXED_STRINGS 0x0004
+
+/* Binary file options */
+
+enum { BIN_BINARY, BIN_NOMATCH, BIN_TEXT };
+
+/* In newer versions of gcc, with FORTIFY_SOURCE set (the default in some
+environments), a warning is issued if the value of fwrite() is ignored.
+Unfortunately, casting to (void) does not suppress the warning. To get round
+this, we use a macro that compiles a fudge. Oddly, this does not also seem to
+apply to fprintf(). */
+
+#define FWRITE_IGNORE(a,b,c,d) if (fwrite(a,b,c,d)) {}
+
+/* Under Windows, we have to set stdout to be binary, so that it does not
+convert \r\n at the ends of output lines to \r\r\n. However, that means that
+any messages written to stdout must have \r\n as their line terminator. This is
+handled by using STDOUT_NL as the newline string. We also use a normal double
+quote for the example, as single quotes aren't usually available. */
+
+#ifdef WIN32
+#define STDOUT_NL "\r\n"
+#define QUOT "\""
+#else
+#define STDOUT_NL "\n"
+#define QUOT "'"
+#endif
+
+
+
+/*************************************************
+* Global variables *
+*************************************************/
+
+/* Jeffrey Friedl has some debugging requirements that are not part of the
+regular code. */
+
+#ifdef JFRIEDL_DEBUG
+static int S_arg = -1;
+static unsigned int jfriedl_XR = 0; /* repeat regex attempt this many times */
+static unsigned int jfriedl_XT = 0; /* replicate text this many times */
+static const char *jfriedl_prefix = "";
+static const char *jfriedl_postfix = "";
+#endif
+
+static const char *colour_string = "1;31";
+static const char *colour_option = NULL;
+static const char *dee_option = NULL;
+static const char *DEE_option = NULL;
+static const char *locale = NULL;
+static const char *newline_arg = NULL;
+static const char *om_separator = NULL;
+static const char *stdin_name = "(standard input)";
+static const char *output_text = NULL;
+
+static char *main_buffer = NULL;
+
+static int after_context = 0;
+static int before_context = 0;
+static int binary_files = BIN_BINARY;
+static int both_context = 0;
+static int bufthird = PCRE2GREP_BUFSIZE;
+static int max_bufthird = PCRE2GREP_MAX_BUFSIZE;
+static int bufsize = 3*PCRE2GREP_BUFSIZE;
+static int endlinetype;
+
+static unsigned long int total_count = 0;
+static unsigned long int counts_printed = 0;
+
+#ifdef WIN32
+static int dee_action = dee_SKIP;
+#else
+static int dee_action = dee_READ;
+#endif
+
+static int DEE_action = DEE_READ;
+static int error_count = 0;
+static int filenames = FN_DEFAULT;
+
+#ifdef SUPPORT_PCRE2GREP_JIT
+static BOOL use_jit = TRUE;
+#else
+static BOOL use_jit = FALSE;
+#endif
+
+static const uint8_t *character_tables = NULL;
+
+static uint32_t pcre2_options = 0;
+static uint32_t extra_options = 0;
+static PCRE2_SIZE heap_limit = PCRE2_UNSET;
+static uint32_t match_limit = 0;
+static uint32_t depth_limit = 0;
+
+static pcre2_compile_context *compile_context;
+static pcre2_match_context *match_context;
+static pcre2_match_data *match_data;
+static PCRE2_SIZE *offsets;
+
+static BOOL count_only = FALSE;
+static BOOL do_colour = FALSE;
+#ifdef WIN32
+static BOOL do_ansi = FALSE;
+#endif
+static BOOL file_offsets = FALSE;
+static BOOL hyphenpending = FALSE;
+static BOOL invert = FALSE;
+static BOOL line_buffered = FALSE;
+static BOOL line_offsets = FALSE;
+static BOOL multiline = FALSE;
+static BOOL number = FALSE;
+static BOOL omit_zero_count = FALSE;
+static BOOL resource_error = FALSE;
+static BOOL quiet = FALSE;
+static BOOL show_total_count = FALSE;
+static BOOL silent = FALSE;
+static BOOL utf = FALSE;
+
+/* Structure for list of --only-matching capturing numbers. */
+
+typedef struct omstr {
+ struct omstr *next;
+ int groupnum;
+} omstr;
+
+static omstr *only_matching = NULL;
+static omstr *only_matching_last = NULL;
+static int only_matching_count;
+
+/* Structure for holding the two variables that describe a number chain. */
+
+typedef struct omdatastr {
+ omstr **anchor;
+ omstr **lastptr;
+} omdatastr;
+
+static omdatastr only_matching_data = { &only_matching, &only_matching_last };
+
+/* Structure for list of file names (for -f and --{in,ex}clude-from) */
+
+typedef struct fnstr {
+ struct fnstr *next;
+ char *name;
+} fnstr;
+
+static fnstr *exclude_from = NULL;
+static fnstr *exclude_from_last = NULL;
+static fnstr *include_from = NULL;
+static fnstr *include_from_last = NULL;
+
+static fnstr *file_lists = NULL;
+static fnstr *file_lists_last = NULL;
+static fnstr *pattern_files = NULL;
+static fnstr *pattern_files_last = NULL;
+
+/* Structure for holding the two variables that describe a file name chain. */
+
+typedef struct fndatastr {
+ fnstr **anchor;
+ fnstr **lastptr;
+} fndatastr;
+
+static fndatastr exclude_from_data = { &exclude_from, &exclude_from_last };
+static fndatastr include_from_data = { &include_from, &include_from_last };
+static fndatastr file_lists_data = { &file_lists, &file_lists_last };
+static fndatastr pattern_files_data = { &pattern_files, &pattern_files_last };
+
+/* Structure for pattern and its compiled form; used for matching patterns and
+also for include/exclude patterns. */
+
+typedef struct patstr {
+ struct patstr *next;
+ char *string;
+ PCRE2_SIZE length;
+ pcre2_code *compiled;
+} patstr;
+
+static patstr *patterns = NULL;
+static patstr *patterns_last = NULL;
+static patstr *include_patterns = NULL;
+static patstr *include_patterns_last = NULL;
+static patstr *exclude_patterns = NULL;
+static patstr *exclude_patterns_last = NULL;
+static patstr *include_dir_patterns = NULL;
+static patstr *include_dir_patterns_last = NULL;
+static patstr *exclude_dir_patterns = NULL;
+static patstr *exclude_dir_patterns_last = NULL;
+
+/* Structure holding the two variables that describe a pattern chain. A pointer
+to such structures is used for each appropriate option. */
+
+typedef struct patdatastr {
+ patstr **anchor;
+ patstr **lastptr;
+} patdatastr;
+
+static patdatastr match_patdata = { &patterns, &patterns_last };
+static patdatastr include_patdata = { &include_patterns, &include_patterns_last };
+static patdatastr exclude_patdata = { &exclude_patterns, &exclude_patterns_last };
+static patdatastr include_dir_patdata = { &include_dir_patterns, &include_dir_patterns_last };
+static patdatastr exclude_dir_patdata = { &exclude_dir_patterns, &exclude_dir_patterns_last };
+
+static patstr **incexlist[4] = { &include_patterns, &exclude_patterns,
+ &include_dir_patterns, &exclude_dir_patterns };
+
+static const char *incexname[4] = { "--include", "--exclude",
+ "--include-dir", "--exclude-dir" };
+
+/* Structure for options and list of them */
+
+enum { OP_NODATA, OP_STRING, OP_OP_STRING, OP_NUMBER, OP_U32NUMBER, OP_SIZE,
+ OP_OP_NUMBER, OP_OP_NUMBERS, OP_PATLIST, OP_FILELIST, OP_BINFILES };
+
+typedef struct option_item {
+ int type;
+ int one_char;
+ void *dataptr;
+ const char *long_name;
+ const char *help_text;
+} option_item;
+
+/* Options without a single-letter equivalent get a negative value. This can be
+used to identify them. */
+
+#define N_COLOUR (-1)
+#define N_EXCLUDE (-2)
+#define N_EXCLUDE_DIR (-3)
+#define N_HELP (-4)
+#define N_INCLUDE (-5)
+#define N_INCLUDE_DIR (-6)
+#define N_LABEL (-7)
+#define N_LOCALE (-8)
+#define N_NULL (-9)
+#define N_LOFFSETS (-10)
+#define N_FOFFSETS (-11)
+#define N_LBUFFER (-12)
+#define N_H_LIMIT (-13)
+#define N_M_LIMIT (-14)
+#define N_M_LIMIT_DEP (-15)
+#define N_BUFSIZE (-16)
+#define N_NOJIT (-17)
+#define N_FILE_LIST (-18)
+#define N_BINARY_FILES (-19)
+#define N_EXCLUDE_FROM (-20)
+#define N_INCLUDE_FROM (-21)
+#define N_OM_SEPARATOR (-22)
+#define N_MAX_BUFSIZE (-23)
+
+static option_item optionlist[] = {
+ { OP_NODATA, N_NULL, NULL, "", "terminate options" },
+ { OP_NODATA, N_HELP, NULL, "help", "display this help and exit" },
+ { OP_NUMBER, 'A', &after_context, "after-context=number", "set number of following context lines" },
+ { OP_NODATA, 'a', NULL, "text", "treat binary files as text" },
+ { OP_NUMBER, 'B', &before_context, "before-context=number", "set number of prior context lines" },
+ { OP_BINFILES, N_BINARY_FILES, NULL, "binary-files=word", "set treatment of binary files" },
+ { OP_NUMBER, N_BUFSIZE,&bufthird, "buffer-size=number", "set processing buffer starting size" },
+ { OP_NUMBER, N_MAX_BUFSIZE,&max_bufthird, "max-buffer-size=number", "set processing buffer maximum size" },
+ { OP_OP_STRING, N_COLOUR, &colour_option, "color=option", "matched text color option" },
+ { OP_OP_STRING, N_COLOUR, &colour_option, "colour=option", "matched text colour option" },
+ { OP_NUMBER, 'C', &both_context, "context=number", "set number of context lines, before & after" },
+ { OP_NODATA, 'c', NULL, "count", "print only a count of matching lines per FILE" },
+ { OP_STRING, 'D', &DEE_option, "devices=action","how to handle devices, FIFOs, and sockets" },
+ { OP_STRING, 'd', &dee_option, "directories=action", "how to handle directories" },
+ { OP_PATLIST, 'e', &match_patdata, "regex(p)=pattern", "specify pattern (may be used more than once)" },
+ { OP_NODATA, 'F', NULL, "fixed-strings", "patterns are sets of newline-separated strings" },
+ { OP_FILELIST, 'f', &pattern_files_data, "file=path", "read patterns from file" },
+ { OP_FILELIST, N_FILE_LIST, &file_lists_data, "file-list=path","read files to search from file" },
+ { OP_NODATA, N_FOFFSETS, NULL, "file-offsets", "output file offsets, not text" },
+ { OP_NODATA, 'H', NULL, "with-filename", "force the prefixing filename on output" },
+ { OP_NODATA, 'h', NULL, "no-filename", "suppress the prefixing filename on output" },
+ { OP_NODATA, 'I', NULL, "", "treat binary files as not matching (ignore)" },
+ { OP_NODATA, 'i', NULL, "ignore-case", "ignore case distinctions" },
+ { OP_NODATA, 'l', NULL, "files-with-matches", "print only FILE names containing matches" },
+ { OP_NODATA, 'L', NULL, "files-without-match","print only FILE names not containing matches" },
+ { OP_STRING, N_LABEL, &stdin_name, "label=name", "set name for standard input" },
+ { OP_NODATA, N_LBUFFER, NULL, "line-buffered", "use line buffering" },
+ { OP_NODATA, N_LOFFSETS, NULL, "line-offsets", "output line numbers and offsets, not text" },
+ { OP_STRING, N_LOCALE, &locale, "locale=locale", "use the named locale" },
+ { OP_SIZE, N_H_LIMIT, &heap_limit, "heap-limit=number", "set PCRE2 heap limit option (kibibytes)" },
+ { OP_U32NUMBER, N_M_LIMIT, &match_limit, "match-limit=number", "set PCRE2 match limit option" },
+ { OP_U32NUMBER, N_M_LIMIT_DEP, &depth_limit, "depth-limit=number", "set PCRE2 depth limit option" },
+ { OP_U32NUMBER, N_M_LIMIT_DEP, &depth_limit, "recursion-limit=number", "obsolete synonym for depth-limit" },
+ { OP_NODATA, 'M', NULL, "multiline", "run in multiline mode" },
+ { OP_STRING, 'N', &newline_arg, "newline=type", "set newline type (CR, LF, CRLF, ANYCRLF, ANY, or NUL)" },
+ { OP_NODATA, 'n', NULL, "line-number", "print line number with output lines" },
+#ifdef SUPPORT_PCRE2GREP_JIT
+ { OP_NODATA, N_NOJIT, NULL, "no-jit", "do not use just-in-time compiler optimization" },
+#else
+ { OP_NODATA, N_NOJIT, NULL, "no-jit", "ignored: this pcre2grep does not support JIT" },
+#endif
+ { OP_STRING, 'O', &output_text, "output=text", "show only this text (possibly expanded)" },
+ { OP_OP_NUMBERS, 'o', &only_matching_data, "only-matching=n", "show only the part of the line that matched" },
+ { OP_STRING, N_OM_SEPARATOR, &om_separator, "om-separator=text", "set separator for multiple -o output" },
+ { OP_NODATA, 'q', NULL, "quiet", "suppress output, just set return code" },
+ { OP_NODATA, 'r', NULL, "recursive", "recursively scan sub-directories" },
+ { OP_PATLIST, N_EXCLUDE,&exclude_patdata, "exclude=pattern","exclude matching files when recursing" },
+ { OP_PATLIST, N_INCLUDE,&include_patdata, "include=pattern","include matching files when recursing" },
+ { OP_PATLIST, N_EXCLUDE_DIR,&exclude_dir_patdata, "exclude-dir=pattern","exclude matching directories when recursing" },
+ { OP_PATLIST, N_INCLUDE_DIR,&include_dir_patdata, "include-dir=pattern","include matching directories when recursing" },
+ { OP_FILELIST, N_EXCLUDE_FROM,&exclude_from_data, "exclude-from=path", "read exclude list from file" },
+ { OP_FILELIST, N_INCLUDE_FROM,&include_from_data, "include-from=path", "read include list from file" },
+#ifdef JFRIEDL_DEBUG
+ { OP_OP_NUMBER, 'S', &S_arg, "jeffS", "replace matched (sub)string with X" },
+#endif
+ { OP_NODATA, 's', NULL, "no-messages", "suppress error messages" },
+ { OP_NODATA, 't', NULL, "total-count", "print total count of matching lines" },
+ { OP_NODATA, 'u', NULL, "utf", "use UTF mode" },
+ { OP_NODATA, 'V', NULL, "version", "print version information and exit" },
+ { OP_NODATA, 'v', NULL, "invert-match", "select non-matching lines" },
+ { OP_NODATA, 'w', NULL, "word-regex(p)", "force patterns to match only as words" },
+ { OP_NODATA, 'x', NULL, "line-regex(p)", "force patterns to match only whole lines" },
+ { OP_NODATA, 0, NULL, NULL, NULL }
+};
+
+/* Table of names for newline types. Must be kept in step with the definitions
+of PCRE2_NEWLINE_xx in pcre2.h. */
+
+static const char *newlines[] = {
+ "DEFAULT", "CR", "LF", "CRLF", "ANY", "ANYCRLF", "NUL" };
+
+/* UTF-8 tables - used only when the newline setting is "any". */
+
+const int utf8_table3[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01};
+
+const char utf8_table4[] = {
+ 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
+ 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
+ 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
+ 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 };
+
+
+#if !defined(VPCOMPAT) && !defined(HAVE_MEMMOVE)
+/*************************************************
+* Emulated memmove() for systems without it *
+*************************************************/
+
+/* This function can make use of bcopy() if it is available. Otherwise do it by
+steam, as there are some non-Unix environments that lack both memmove() and
+bcopy(). */
+
+static void *
+emulated_memmove(void *d, const void *s, size_t n)
+{
+#ifdef HAVE_BCOPY
+bcopy(s, d, n);
+return d;
+#else
+size_t i;
+unsigned char *dest = (unsigned char *)d;
+const unsigned char *src = (const unsigned char *)s;
+if (dest > src)
+ {
+ dest += n;
+ src += n;
+ for (i = 0; i < n; ++i) *(--dest) = *(--src);
+ return (void *)dest;
+ }
+else
+ {
+ for (i = 0; i < n; ++i) *dest++ = *src++;
+ return (void *)(dest - n);
+ }
+#endif /* not HAVE_BCOPY */
+}
+#undef memmove
+#define memmove(d,s,n) emulated_memmove(d,s,n)
+#endif /* not VPCOMPAT && not HAVE_MEMMOVE */
+
+
+/*************************************************
+* Case-independent string compare *
+*************************************************/
+
+static int
+strcmpic(const char *str1, const char *str2)
+{
+unsigned int c1, c2;
+while (*str1 != '\0' || *str2 != '\0')
+ {
+ c1 = tolower(*str1++);
+ c2 = tolower(*str2++);
+ if (c1 != c2) return ((c1 > c2) << 1) - 1;
+ }
+return 0;
+}
+
+
+/*************************************************
+* Parse GREP_COLORS *
+*************************************************/
+
+/* Extract ms or mt from GREP_COLORS.
+
+Argument: the string, possibly NULL
+Returns: the value of ms or mt, or NULL if neither present
+*/
+
+static char *
+parse_grep_colors(const char *gc)
+{
+static char seq[16];
+char *col;
+uint32_t len;
+if (gc == NULL) return NULL;
+col = strstr(gc, "ms=");
+if (col == NULL) col = strstr(gc, "mt=");
+if (col == NULL) return NULL;
+len = 0;
+col += 3;
+while (*col != ':' && *col != 0 && len < sizeof(seq)-1)
+ seq[len++] = *col++;
+seq[len] = 0;
+return seq;
+}
+
+
+/*************************************************
+* Exit from the program *
+*************************************************/
+
+/* If there has been a resource error, give a suitable message.
+
+Argument: the return code
+Returns: does not return
+*/
+
+static void
+pcre2grep_exit(int rc)
+{
+/* VMS does exit codes differently: both exit(1) and exit(0) return with a
+status of 1, which is not helpful. To help with this problem, define a symbol
+(akin to an environment variable) called "PCRE2GREP_RC" and put the exit code
+therein. */
+
+#ifdef __VMS
+#include descrip
+#include lib$routines
+ char val_buf[4];
+ $DESCRIPTOR(sym_nam, "PCRE2GREP_RC");
+ $DESCRIPTOR(sym_val, val_buf);
+ sprintf(val_buf, "%d", rc);
+ sym_val.dsc$w_length = strlen(val_buf);
+ lib$set_symbol(&sym_nam, &sym_val);
+#endif
+
+if (resource_error)
+ {
+ fprintf(stderr, "pcre2grep: Error %d, %d, %d or %d means that a resource "
+ "limit was exceeded.\n", PCRE2_ERROR_JIT_STACKLIMIT, PCRE2_ERROR_MATCHLIMIT,
+ PCRE2_ERROR_DEPTHLIMIT, PCRE2_ERROR_HEAPLIMIT);
+ fprintf(stderr, "pcre2grep: Check your regex for nested unlimited loops.\n");
+ }
+exit(rc);
+}
+
+
+/*************************************************
+* Add item to chain of patterns *
+*************************************************/
+
+/* Used to add an item onto a chain, or just return an unconnected item if the
+"after" argument is NULL.
+
+Arguments:
+ s pattern string to add
+ patlen length of pattern
+ after if not NULL points to item to insert after
+
+Returns: new pattern block or NULL on error
+*/
+
+static patstr *
+add_pattern(char *s, PCRE2_SIZE patlen, patstr *after)
+{
+patstr *p = (patstr *)malloc(sizeof(patstr));
+if (p == NULL)
+ {
+ fprintf(stderr, "pcre2grep: malloc failed\n");
+ pcre2grep_exit(2);
+ }
+if (patlen > MAXPATLEN)
+ {
+ fprintf(stderr, "pcre2grep: pattern is too long (limit is %d bytes)\n",
+ MAXPATLEN);
+ free(p);
+ return NULL;
+ }
+p->next = NULL;
+p->string = s;
+p->length = patlen;
+p->compiled = NULL;
+
+if (after != NULL)
+ {
+ p->next = after->next;
+ after->next = p;
+ }
+return p;
+}
+
+
+/*************************************************
+* Free chain of patterns *
+*************************************************/
+
+/* Used for several chains of patterns.
+
+Argument: pointer to start of chain
+Returns: nothing
+*/
+
+static void
+free_pattern_chain(patstr *pc)
+{
+while (pc != NULL)
+ {
+ patstr *p = pc;
+ pc = p->next;
+ if (p->compiled != NULL) pcre2_code_free(p->compiled);
+ free(p);
+ }
+}
+
+
+/*************************************************
+* Free chain of file names *
+*************************************************/
+
+/*
+Argument: pointer to start of chain
+Returns: nothing
+*/
+
+static void
+free_file_chain(fnstr *fn)
+{
+while (fn != NULL)
+ {
+ fnstr *f = fn;
+ fn = f->next;
+ free(f);
+ }
+}
+
+
+/*************************************************
+* OS-specific functions *
+*************************************************/
+
+/* These definitions are needed in all Windows environments, even those where
+Unix-style directory scanning can be used (see below). */
+
+#ifdef WIN32
+
+#ifndef STRICT
+# define STRICT
+#endif
+#ifndef WIN32_LEAN_AND_MEAN
+# define WIN32_LEAN_AND_MEAN
+#endif
+
+#include <windows.h>
+
+#define iswild(name) (strpbrk(name, "*?") != NULL)
+
+/* Convert ANSI BGR format to RGB used by Windows */
+#define BGR_RGB(x) ((x & 1 ? 4 : 0) | (x & 2) | (x & 4 ? 1 : 0))
+
+static HANDLE hstdout;
+static CONSOLE_SCREEN_BUFFER_INFO csbi;
+static WORD match_colour;
+
+static WORD
+decode_ANSI_colour(const char *cs)
+{
+WORD result = csbi.wAttributes;
+while (*cs)
+ {
+ if (isdigit(*cs))
+ {
+ int code = atoi(cs);
+ if (code == 1) result |= 0x08;
+ else if (code == 4) result |= 0x8000;
+ else if (code == 5) result |= 0x80;
+ else if (code >= 30 && code <= 37) result = (result & 0xF8) | BGR_RGB(code - 30);
+ else if (code == 39) result = (result & 0xF0) | (csbi.wAttributes & 0x0F);
+ else if (code >= 40 && code <= 47) result = (result & 0x8F) | (BGR_RGB(code - 40) << 4);
+ else if (code == 49) result = (result & 0x0F) | (csbi.wAttributes & 0xF0);
+ /* aixterm high intensity colour codes */
+ else if (code >= 90 && code <= 97) result = (result & 0xF0) | BGR_RGB(code - 90) | 0x08;
+ else if (code >= 100 && code <= 107) result = (result & 0x0F) | (BGR_RGB(code - 100) << 4) | 0x80;
+
+ while (isdigit(*cs)) cs++;
+ }
+ if (*cs) cs++;
+ }
+return result;
+}
+
+
+static void
+init_colour_output()
+{
+if (do_colour)
+ {
+ hstdout = GetStdHandle(STD_OUTPUT_HANDLE);
+ /* This fails when redirected to con; try again if so. */
+ if (!GetConsoleScreenBufferInfo(hstdout, &csbi) && !do_ansi)
+ {
+ HANDLE hcon = CreateFile("CONOUT$", GENERIC_READ | GENERIC_WRITE,
+ FILE_SHARE_WRITE, NULL, OPEN_EXISTING, 0, NULL);
+ GetConsoleScreenBufferInfo(hcon, &csbi);
+ CloseHandle(hcon);
+ }
+ match_colour = decode_ANSI_colour(colour_string);
+ /* No valid colour found - turn off colouring */
+ if (!match_colour) do_colour = FALSE;
+ }
+}
+
+#endif /* WIN32 */
+
+
+/* The following sets of functions are defined so that they can be made system
+specific. At present there are versions for Unix-style environments, Windows,
+native z/OS, and "no support". */
+
+
+/************* Directory scanning Unix-style and z/OS ***********/
+
+#if (defined HAVE_SYS_STAT_H && defined HAVE_DIRENT_H && defined HAVE_SYS_TYPES_H) || defined NATIVE_ZOS
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <dirent.h>
+
+#if defined NATIVE_ZOS
+/************* Directory and PDS/E scanning for z/OS ***********/
+/************* z/OS looks mostly like Unix with USS ************/
+/* However, z/OS needs the #include statements in this header */
+#include "pcrzosfs.h"
+/* That header is not included in the main PCRE distribution because
+ other apparatus is needed to compile pcre2grep for z/OS. The header
+ can be found in the special z/OS distribution, which is available
+ from www.zaconsultants.net or from www.cbttape.org. */
+#endif
+
+typedef DIR directory_type;
+#define FILESEP '/'
+
+static int
+isdirectory(char *filename)
+{
+struct stat statbuf;
+if (stat(filename, &statbuf) < 0)
+ return 0; /* In the expectation that opening as a file will fail */
+return S_ISDIR(statbuf.st_mode);
+}
+
+static directory_type *
+opendirectory(char *filename)
+{
+return opendir(filename);
+}
+
+static char *
+readdirectory(directory_type *dir)
+{
+for (;;)
+ {
+ struct dirent *dent = readdir(dir);
+ if (dent == NULL) return NULL;
+ if (strcmp(dent->d_name, ".") != 0 && strcmp(dent->d_name, "..") != 0)
+ return dent->d_name;
+ }
+/* Control never reaches here */
+}
+
+static void
+closedirectory(directory_type *dir)
+{
+closedir(dir);
+}
+
+
+/************* Test for regular file, Unix-style **********/
+
+static int
+isregfile(char *filename)
+{
+struct stat statbuf;
+if (stat(filename, &statbuf) < 0)
+ return 1; /* In the expectation that opening as a file will fail */
+return S_ISREG(statbuf.st_mode);
+}
+
+
+#if defined NATIVE_ZOS
+/************* Test for a terminal in z/OS **********/
+/* isatty() does not work in a TSO environment, so always give FALSE.*/
+
+static BOOL
+is_stdout_tty(void)
+{
+return FALSE;
+}
+
+static BOOL
+is_file_tty(FILE *f)
+{
+return FALSE;
+}
+
+
+/************* Test for a terminal, Unix-style **********/
+
+#else
+static BOOL
+is_stdout_tty(void)
+{
+return isatty(fileno(stdout));
+}
+
+static BOOL
+is_file_tty(FILE *f)
+{
+return isatty(fileno(f));
+}
+#endif
+
+
+/************* Print optionally coloured match Unix-style and z/OS **********/
+
+static void
+print_match(const void *buf, int length)
+{
+if (length == 0) return;
+if (do_colour) fprintf(stdout, "%c[%sm", 0x1b, colour_string);
+FWRITE_IGNORE(buf, 1, length, stdout);
+if (do_colour) fprintf(stdout, "%c[0m", 0x1b);
+}
+
+/* End of Unix-style or native z/OS environment functions. */
+
+
+/************* Directory scanning in Windows ***********/
+
+/* I (Philip Hazel) have no means of testing this code. It was contributed by
+Lionel Fourquaux. David Burgess added a patch to define INVALID_FILE_ATTRIBUTES
+when it did not exist. David Byron added a patch that moved the #include of
+<windows.h> to before the INVALID_FILE_ATTRIBUTES definition rather than after.
+*/
+
+#elif defined WIN32
+
+#ifndef INVALID_FILE_ATTRIBUTES
+#define INVALID_FILE_ATTRIBUTES 0xFFFFFFFF
+#endif
+
+typedef struct directory_type
+{
+HANDLE handle;
+BOOL first;
+WIN32_FIND_DATA data;
+} directory_type;
+
+#define FILESEP '/'
+
+int
+isdirectory(char *filename)
+{
+DWORD attr = GetFileAttributes(filename);
+if (attr == INVALID_FILE_ATTRIBUTES)
+ return 0;
+return (attr & FILE_ATTRIBUTE_DIRECTORY) != 0;
+}
+
+directory_type *
+opendirectory(char *filename)
+{
+size_t len;
+char *pattern;
+directory_type *dir;
+DWORD err;
+len = strlen(filename);
+pattern = (char *)malloc(len + 3);
+dir = (directory_type *)malloc(sizeof(*dir));
+if ((pattern == NULL) || (dir == NULL))
+ {
+ fprintf(stderr, "pcre2grep: malloc failed\n");
+ pcre2grep_exit(2);
+ }
+memcpy(pattern, filename, len);
+if (iswild(filename))
+ pattern[len] = 0;
+else
+ memcpy(&(pattern[len]), "\\*", 3);
+dir->handle = FindFirstFile(pattern, &(dir->data));
+if (dir->handle != INVALID_HANDLE_VALUE)
+ {
+ free(pattern);
+ dir->first = TRUE;
+ return dir;
+ }
+err = GetLastError();
+free(pattern);
+free(dir);
+errno = (err == ERROR_ACCESS_DENIED) ? EACCES : ENOENT;
+return NULL;
+}
+
+char *
+readdirectory(directory_type *dir)
+{
+for (;;)
+ {
+ if (!dir->first)
+ {
+ if (!FindNextFile(dir->handle, &(dir->data)))
+ return NULL;
+ }
+ else
+ {
+ dir->first = FALSE;
+ }
+ if (strcmp(dir->data.cFileName, ".") != 0 && strcmp(dir->data.cFileName, "..") != 0)
+ return dir->data.cFileName;
+ }
+#ifndef _MSC_VER
+return NULL; /* Keep compiler happy; never executed */
+#endif
+}
+
+void
+closedirectory(directory_type *dir)
+{
+FindClose(dir->handle);
+free(dir);
+}
+
+
+/************* Test for regular file in Windows **********/
+
+/* I don't know how to do this, or if it can be done; assume all paths are
+regular if they are not directories. */
+
+int isregfile(char *filename)
+{
+return !isdirectory(filename);
+}
+
+
+/************* Test for a terminal in Windows **********/
+
+static BOOL
+is_stdout_tty(void)
+{
+return _isatty(_fileno(stdout));
+}
+
+static BOOL
+is_file_tty(FILE *f)
+{
+return _isatty(_fileno(f));
+}
+
+
+/************* Print optionally coloured match in Windows **********/
+
+static void
+print_match(const void *buf, int length)
+{
+if (length == 0) return;
+if (do_colour)
+ {
+ if (do_ansi) fprintf(stdout, "%c[%sm", 0x1b, colour_string);
+ else SetConsoleTextAttribute(hstdout, match_colour);
+ }
+FWRITE_IGNORE(buf, 1, length, stdout);
+if (do_colour)
+ {
+ if (do_ansi) fprintf(stdout, "%c[0m", 0x1b);
+ else SetConsoleTextAttribute(hstdout, csbi.wAttributes);
+ }
+}
+
+/* End of Windows functions */
+
+
+/************* Directory scanning when we can't do it ***********/
+
+/* The type is void, and apart from isdirectory(), the functions do nothing. */
+
+#else
+
+#define FILESEP 0
+typedef void directory_type;
+
+int isdirectory(char *filename) { return 0; }
+directory_type * opendirectory(char *filename) { return (directory_type*)0;}
+char *readdirectory(directory_type *dir) { return (char*)0;}
+void closedirectory(directory_type *dir) {}
+
+
+/************* Test for regular file when we can't do it **********/
+
+/* Assume all files are regular. */
+
+int isregfile(char *filename) { return 1; }
+
+
+/************* Test for a terminal when we can't do it **********/
+
+static BOOL
+is_stdout_tty(void)
+{
+return FALSE;
+}
+
+static BOOL
+is_file_tty(FILE *f)
+{
+return FALSE;
+}
+
+
+/************* Print optionally coloured match when we can't do it **********/
+
+static void
+print_match(const void *buf, int length)
+{
+if (length == 0) return;
+FWRITE_IGNORE(buf, 1, length, stdout);
+}
+
+#endif /* End of system-specific functions */
+
+
+
+#ifndef HAVE_STRERROR
+/*************************************************
+* Provide strerror() for non-ANSI libraries *
+*************************************************/
+
+/* Some old-fashioned systems still around (e.g. SunOS4) don't have strerror()
+in their libraries, but can provide the same facility by this simple
+alternative function. */
+
+extern int sys_nerr;
+extern char *sys_errlist[];
+
+char *
+strerror(int n)
+{
+if (n < 0 || n >= sys_nerr) return "unknown error number";
+return sys_errlist[n];
+}
+#endif /* HAVE_STRERROR */
+
+
+
+/*************************************************
+* Usage function *
+*************************************************/
+
+static int
+usage(int rc)
+{
+option_item *op;
+fprintf(stderr, "Usage: pcre2grep [-");
+for (op = optionlist; op->one_char != 0; op++)
+ {
+ if (op->one_char > 0) fprintf(stderr, "%c", op->one_char);
+ }
+fprintf(stderr, "] [long options] [pattern] [files]\n");
+fprintf(stderr, "Type \"pcre2grep --help\" for more information and the long "
+ "options.\n");
+return rc;
+}
+
+
+
+/*************************************************
+* Help function *
+*************************************************/
+
+static void
+help(void)
+{
+option_item *op;
+
+printf("Usage: pcre2grep [OPTION]... [PATTERN] [FILE1 FILE2 ...]" STDOUT_NL);
+printf("Search for PATTERN in each FILE or standard input." STDOUT_NL);
+printf("PATTERN must be present if neither -e nor -f is used." STDOUT_NL);
+
+#ifdef SUPPORT_PCRE2GREP_CALLOUT
+printf("Callout scripts in patterns are supported." STDOUT_NL);
+#else
+printf("Callout scripts are not supported in this pcre2grep." STDOUT_NL);
+#endif
+
+printf("\"-\" can be used as a file name to mean STDIN." STDOUT_NL);
+
+#ifdef SUPPORT_LIBZ
+printf("Files whose names end in .gz are read using zlib." STDOUT_NL);
+#endif
+
+#ifdef SUPPORT_LIBBZ2
+printf("Files whose names end in .bz2 are read using bzlib2." STDOUT_NL);
+#endif
+
+#if defined SUPPORT_LIBZ || defined SUPPORT_LIBBZ2
+printf("Other files and the standard input are read as plain files." STDOUT_NL STDOUT_NL);
+#else
+printf("All files are read as plain files, without any interpretation." STDOUT_NL STDOUT_NL);
+#endif
+
+printf("Example: pcre2grep -i " QUOT "hello.*world" QUOT " menu.h main.c" STDOUT_NL STDOUT_NL);
+printf("Options:" STDOUT_NL);
+
+for (op = optionlist; op->one_char != 0; op++)
+ {
+ int n;
+ char s[4];
+
+ if (op->one_char > 0 && (op->long_name)[0] == 0)
+ n = 31 - printf(" -%c", op->one_char);
+ else
+ {
+ if (op->one_char > 0) sprintf(s, "-%c,", op->one_char);
+ else strcpy(s, " ");
+ n = 31 - printf(" %s --%s", s, op->long_name);
+ }
+
+ if (n < 1) n = 1;
+ printf("%.*s%s" STDOUT_NL, n, " ", op->help_text);
+ }
+
+printf(STDOUT_NL "Numbers may be followed by K or M, e.g. --max-buffer-size=100K." STDOUT_NL);
+printf("The default value for --buffer-size is %d." STDOUT_NL, PCRE2GREP_BUFSIZE);
+printf("The default value for --max-buffer-size is %d." STDOUT_NL, PCRE2GREP_MAX_BUFSIZE);
+printf("When reading patterns or file names from a file, trailing white" STDOUT_NL);
+printf("space is removed and blank lines are ignored." STDOUT_NL);
+printf("The maximum size of any pattern is %d bytes." STDOUT_NL, MAXPATLEN);
+
+printf(STDOUT_NL "With no FILEs, read standard input. If fewer than two FILEs given, assume -h." STDOUT_NL);
+printf("Exit status is 0 if any matches, 1 if no matches, and 2 if trouble." STDOUT_NL);
+}
+
+
+
+/*************************************************
+* Test exclude/includes *
+*************************************************/
+
+/* If any exclude pattern matches, the path is excluded. Otherwise, unless
+there are no includes, the path must match an include pattern.
+
+Arguments:
+ path the path to be matched
+ ip the chain of include patterns
+ ep the chain of exclude patterns
+
+Returns: TRUE if the path is not excluded
+*/
+
+static BOOL
+test_incexc(char *path, patstr *ip, patstr *ep)
+{
+int plen = strlen((const char *)path);
+
+for (; ep != NULL; ep = ep->next)
+ {
+ if (pcre2_match(ep->compiled, (PCRE2_SPTR)path, plen, 0, 0, match_data, NULL) >= 0)
+ return FALSE;
+ }
+
+if (ip == NULL) return TRUE;
+
+for (; ip != NULL; ip = ip->next)
+ {
+ if (pcre2_match(ip->compiled, (PCRE2_SPTR)path, plen, 0, 0, match_data, NULL) >= 0)
+ return TRUE;
+ }
+
+return FALSE;
+}
+
+
+
+/*************************************************
+* Decode integer argument value *
+*************************************************/
+
+/* Integer arguments can be followed by K or M. Avoid the use of strtoul()
+because SunOS4 doesn't have it. This is used only for unpicking arguments, so
+just keep it simple.
+
+Arguments:
+ option_data the option data string
+ op the option item (for error messages)
+ longop TRUE if option given in long form
+
+Returns: a long integer
+*/
+
+static long int
+decode_number(char *option_data, option_item *op, BOOL longop)
+{
+unsigned long int n = 0;
+char *endptr = option_data;
+while (*endptr != 0 && isspace((unsigned char)(*endptr))) endptr++;
+while (isdigit((unsigned char)(*endptr)))
+ n = n * 10 + (int)(*endptr++ - '0');
+if (toupper(*endptr) == 'K')
+ {
+ n *= 1024;
+ endptr++;
+ }
+else if (toupper(*endptr) == 'M')
+ {
+ n *= 1024*1024;
+ endptr++;
+ }
+
+if (*endptr != 0) /* Error */
+ {
+ if (longop)
+ {
+ char *equals = strchr(op->long_name, '=');
+ int nlen = (equals == NULL)? (int)strlen(op->long_name) :
+ (int)(equals - op->long_name);
+ fprintf(stderr, "pcre2grep: Malformed number \"%s\" after --%.*s\n",
+ option_data, nlen, op->long_name);
+ }
+ else
+ fprintf(stderr, "pcre2grep: Malformed number \"%s\" after -%c\n",
+ option_data, op->one_char);
+ pcre2grep_exit(usage(2));
+ }
+
+return n;
+}
+
+
+
+/*************************************************
+* Add item to a chain of numbers *
+*************************************************/
+
+/* Used to add an item onto a chain, or just return an unconnected item if the
+"after" argument is NULL.
+
+Arguments:
+ n the number to add
+ after if not NULL points to item to insert after
+
+Returns: new number block
+*/
+
+static omstr *
+add_number(int n, omstr *after)
+{
+omstr *om = (omstr *)malloc(sizeof(omstr));
+
+if (om == NULL)
+ {
+ fprintf(stderr, "pcre2grep: malloc failed\n");
+ pcre2grep_exit(2);
+ }
+om->next = NULL;
+om->groupnum = n;
+
+if (after != NULL)
+ {
+ om->next = after->next;
+ after->next = om;
+ }
+return om;
+}
+
+
+
+/*************************************************
+* Read one line of input *
+*************************************************/
+
+/* Normally, input that is to be scanned is read using fread() (or gzread, or
+BZ2_read) into a large buffer, so many lines may be read at once. However,
+doing this for tty input means that no output appears until a lot of input has
+been typed. Instead, tty input is handled line by line. We cannot use fgets()
+for this, because it does not stop at a binary zero, and therefore there is no
+way of telling how many characters it has read, because there may be binary
+zeros embedded in the data. This function is also used for reading patterns
+from files (the -f option).
+
+Arguments:
+ buffer the buffer to read into
+ length the maximum number of characters to read
+ f the file
+
+Returns: the number of characters read, zero at end of file
+*/
+
+static PCRE2_SIZE
+read_one_line(char *buffer, int length, FILE *f)
+{
+int c;
+int yield = 0;
+while ((c = fgetc(f)) != EOF)
+ {
+ buffer[yield++] = c;
+ if (c == '\n' || yield >= length) break;
+ }
+return yield;
+}
+
+
+
+/*************************************************
+* Find end of line *
+*************************************************/
+
+/* The length of the endline sequence that is found is set via lenptr. This may
+be zero at the very end of the file if there is no line-ending sequence there.
+
+Arguments:
+ p current position in line
+ endptr end of available data
+ lenptr where to put the length of the eol sequence
+
+Returns: pointer after the last byte of the line,
+ including the newline byte(s)
+*/
+
+static char *
+end_of_line(char *p, char *endptr, int *lenptr)
+{
+switch(endlinetype)
+ {
+ default: /* Just in case */
+ case PCRE2_NEWLINE_LF:
+ while (p < endptr && *p != '\n') p++;
+ if (p < endptr)
+ {
+ *lenptr = 1;
+ return p + 1;
+ }
+ *lenptr = 0;
+ return endptr;
+
+ case PCRE2_NEWLINE_CR:
+ while (p < endptr && *p != '\r') p++;
+ if (p < endptr)
+ {
+ *lenptr = 1;
+ return p + 1;
+ }
+ *lenptr = 0;
+ return endptr;
+
+ case PCRE2_NEWLINE_NUL:
+ while (p < endptr && *p != '\0') p++;
+ if (p < endptr)
+ {
+ *lenptr = 1;
+ return p + 1;
+ }
+ *lenptr = 0;
+ return endptr;
+
+ case PCRE2_NEWLINE_CRLF:
+ for (;;)
+ {
+ while (p < endptr && *p != '\r') p++;
+ if (++p >= endptr)
+ {
+ *lenptr = 0;
+ return endptr;
+ }
+ if (*p == '\n')
+ {
+ *lenptr = 2;
+ return p + 1;
+ }
+ }
+ break;
+
+ case PCRE2_NEWLINE_ANYCRLF:
+ while (p < endptr)
+ {
+ int extra = 0;
+ int c = *((unsigned char *)p);
+
+ if (utf && c >= 0xc0)
+ {
+ int gcii, gcss;
+ extra = utf8_table4[c & 0x3f]; /* Number of additional bytes */
+ gcss = 6*extra;
+ c = (c & utf8_table3[extra]) << gcss;
+ for (gcii = 1; gcii <= extra; gcii++)
+ {
+ gcss -= 6;
+ c |= (p[gcii] & 0x3f) << gcss;
+ }
+ }
+
+ p += 1 + extra;
+
+ switch (c)
+ {
+ case '\n':
+ *lenptr = 1;
+ return p;
+
+ case '\r':
+ if (p < endptr && *p == '\n')
+ {
+ *lenptr = 2;
+ p++;
+ }
+ else *lenptr = 1;
+ return p;
+
+ default:
+ break;
+ }
+ } /* End of loop for ANYCRLF case */
+
+ *lenptr = 0; /* Must have hit the end */
+ return endptr;
+
+ case PCRE2_NEWLINE_ANY:
+ while (p < endptr)
+ {
+ int extra = 0;
+ int c = *((unsigned char *)p);
+
+ if (utf && c >= 0xc0)
+ {
+ int gcii, gcss;
+ extra = utf8_table4[c & 0x3f]; /* Number of additional bytes */
+ gcss = 6*extra;
+ c = (c & utf8_table3[extra]) << gcss;
+ for (gcii = 1; gcii <= extra; gcii++)
+ {
+ gcss -= 6;
+ c |= (p[gcii] & 0x3f) << gcss;
+ }
+ }
+
+ p += 1 + extra;
+
+ switch (c)
+ {
+ case '\n': /* LF */
+ case '\v': /* VT */
+ case '\f': /* FF */
+ *lenptr = 1;
+ return p;
+
+ case '\r': /* CR */
+ if (p < endptr && *p == '\n')
+ {
+ *lenptr = 2;
+ p++;
+ }
+ else *lenptr = 1;
+ return p;
+
+#ifndef EBCDIC
+ case 0x85: /* Unicode NEL */
+ *lenptr = utf? 2 : 1;
+ return p;
+
+ case 0x2028: /* Unicode LS */
+ case 0x2029: /* Unicode PS */
+ *lenptr = 3;
+ return p;
+#endif /* Not EBCDIC */
+
+ default:
+ break;
+ }
+ } /* End of loop for ANY case */
+
+ *lenptr = 0; /* Must have hit the end */
+ return endptr;
+ } /* End of overall switch */
+}
+
+
+
+/*************************************************
+* Find start of previous line *
+*************************************************/
+
+/* This is called when looking back for before lines to print.
+
+Arguments:
+ p start of the subsequent line
+ startptr start of available data
+
+Returns: pointer to the start of the previous line
+*/
+
+static char *
+previous_line(char *p, char *startptr)
+{
+switch(endlinetype)
+ {
+ default: /* Just in case */
+ case PCRE2_NEWLINE_LF:
+ p--;
+ while (p > startptr && p[-1] != '\n') p--;
+ return p;
+
+ case PCRE2_NEWLINE_CR:
+ p--;
+ while (p > startptr && p[-1] != '\n') p--;
+ return p;
+
+ case PCRE2_NEWLINE_NUL:
+ p--;
+ while (p > startptr && p[-1] != '\0') p--;
+ return p;
+
+ case PCRE2_NEWLINE_CRLF:
+ for (;;)
+ {
+ p -= 2;
+ while (p > startptr && p[-1] != '\n') p--;
+ if (p <= startptr + 1 || p[-2] == '\r') return p;
+ }
+ /* Control can never get here */
+
+ case PCRE2_NEWLINE_ANY:
+ case PCRE2_NEWLINE_ANYCRLF:
+ if (*(--p) == '\n' && p > startptr && p[-1] == '\r') p--;
+ if (utf) while ((*p & 0xc0) == 0x80) p--;
+
+ while (p > startptr)
+ {
+ unsigned int c;
+ char *pp = p - 1;
+
+ if (utf)
+ {
+ int extra = 0;
+ while ((*pp & 0xc0) == 0x80) pp--;
+ c = *((unsigned char *)pp);
+ if (c >= 0xc0)
+ {
+ int gcii, gcss;
+ extra = utf8_table4[c & 0x3f]; /* Number of additional bytes */
+ gcss = 6*extra;
+ c = (c & utf8_table3[extra]) << gcss;
+ for (gcii = 1; gcii <= extra; gcii++)
+ {
+ gcss -= 6;
+ c |= (pp[gcii] & 0x3f) << gcss;
+ }
+ }
+ }
+ else c = *((unsigned char *)pp);
+
+ if (endlinetype == PCRE2_NEWLINE_ANYCRLF) switch (c)
+ {
+ case '\n': /* LF */
+ case '\r': /* CR */
+ return p;
+
+ default:
+ break;
+ }
+
+ else switch (c)
+ {
+ case '\n': /* LF */
+ case '\v': /* VT */
+ case '\f': /* FF */
+ case '\r': /* CR */
+#ifndef EBCDIC
+ case 0x85: /* Unicode NEL */
+ case 0x2028: /* Unicode LS */
+ case 0x2029: /* Unicode PS */
+#endif /* Not EBCDIC */
+ return p;
+
+ default:
+ break;
+ }
+
+ p = pp; /* Back one character */
+ } /* End of loop for ANY case */
+
+ return startptr; /* Hit start of data */
+ } /* End of overall switch */
+}
+
+
+
+/*************************************************
+* Print the previous "after" lines *
+*************************************************/
+
+/* This is called if we are about to lose said lines because of buffer filling,
+and at the end of the file. The data in the line is written using fwrite() so
+that a binary zero does not terminate it.
+
+Arguments:
+ lastmatchnumber the number of the last matching line, plus one
+ lastmatchrestart where we restarted after the last match
+ endptr end of available data
+ printname filename for printing
+
+Returns: nothing
+*/
+
+static void
+do_after_lines(unsigned long int lastmatchnumber, char *lastmatchrestart,
+ char *endptr, const char *printname)
+{
+if (after_context > 0 && lastmatchnumber > 0)
+ {
+ int count = 0;
+ while (lastmatchrestart < endptr && count < after_context)
+ {
+ int ellength;
+ char *pp = end_of_line(lastmatchrestart, endptr, &ellength);
+ if (ellength == 0 && pp == main_buffer + bufsize) break;
+ if (printname != NULL) fprintf(stdout, "%s-", printname);
+ if (number) fprintf(stdout, "%lu-", lastmatchnumber++);
+ FWRITE_IGNORE(lastmatchrestart, 1, pp - lastmatchrestart, stdout);
+ lastmatchrestart = pp;
+ count++;
+ }
+ if (count > 0) hyphenpending = TRUE;
+ }
+}
+
+
+
+/*************************************************
+* Apply patterns to subject till one matches *
+*************************************************/
+
+/* This function is called to run through all patterns, looking for a match. It
+is used multiple times for the same subject when colouring is enabled, in order
+to find all possible matches.
+
+Arguments:
+ matchptr the start of the subject
+ length the length of the subject to match
+ options options for pcre_exec
+ startoffset where to start matching
+ mrc address of where to put the result of pcre2_match()
+
+Returns: TRUE if there was a match
+ FALSE if there was no match
+ invert if there was a non-fatal error
+*/
+
+static BOOL
+match_patterns(char *matchptr, PCRE2_SIZE length, unsigned int options,
+ PCRE2_SIZE startoffset, int *mrc)
+{
+int i;
+PCRE2_SIZE slen = length;
+patstr *p = patterns;
+const char *msg = "this text:\n\n";
+
+if (slen > 200)
+ {
+ slen = 200;
+ msg = "text that starts:\n\n";
+ }
+for (i = 1; p != NULL; p = p->next, i++)
+ {
+ *mrc = pcre2_match(p->compiled, (PCRE2_SPTR)matchptr, (int)length,
+ startoffset, options, match_data, match_context);
+ if (*mrc >= 0) return TRUE;
+ if (*mrc == PCRE2_ERROR_NOMATCH) continue;
+ fprintf(stderr, "pcre2grep: pcre2_match() gave error %d while matching ", *mrc);
+ if (patterns->next != NULL) fprintf(stderr, "pattern number %d to ", i);
+ fprintf(stderr, "%s", msg);
+ FWRITE_IGNORE(matchptr, 1, slen, stderr); /* In case binary zero included */
+ fprintf(stderr, "\n\n");
+ if (*mrc == PCRE2_ERROR_MATCHLIMIT || *mrc == PCRE2_ERROR_DEPTHLIMIT ||
+ *mrc == PCRE2_ERROR_HEAPLIMIT || *mrc == PCRE2_ERROR_JIT_STACKLIMIT)
+ resource_error = TRUE;
+ if (error_count++ > 20)
+ {
+ fprintf(stderr, "pcre2grep: Too many errors - abandoned.\n");
+ pcre2grep_exit(2);
+ }
+ return invert; /* No more matching; don't show the line again */
+ }
+
+return FALSE; /* No match, no errors */
+}
+
+
+/*************************************************
+* Check output text for errors *
+*************************************************/
+
+static BOOL
+syntax_check_output_text(PCRE2_SPTR string, BOOL callout)
+{
+PCRE2_SPTR begin = string;
+for (; *string != 0; string++)
+ {
+ if (*string == '$')
+ {
+ PCRE2_SIZE capture_id = 0;
+ BOOL brace = FALSE;
+
+ string++;
+
+ /* Syntax error: a character must be present after $. */
+ if (*string == 0)
+ {
+ if (!callout)
+ fprintf(stderr, "pcre2grep: Error in output text at offset %d: %s\n",
+ (int)(string - begin), "no character after $");
+ return FALSE;
+ }
+
+ if (*string == '{')
+ {
+ /* Must be a decimal number in braces, e.g: {5} or {38} */
+ string++;
+
+ brace = TRUE;
+ }
+
+ if ((*string >= '1' && *string <= '9') || (!callout && *string == '0'))
+ {
+ do
+ {
+ /* Maximum capture id is 65535. */
+ if (capture_id <= 65535)
+ capture_id = capture_id * 10 + (*string - '0');
+
+ string++;
+ }
+ while (*string >= '0' && *string <= '9');
+
+ if (brace)
+ {
+ /* Syntax error: closing brace is missing. */
+ if (*string != '}')
+ {
+ if (!callout)
+ fprintf(stderr, "pcre2grep: Error in output text at offset %d: %s\n",
+ (int)(string - begin), "missing closing brace");
+ return FALSE;
+ }
+ }
+ else
+ {
+ /* To negate the effect of the for. */
+ string--;
+ }
+ }
+ else if (brace)
+ {
+ /* Syntax error: a decimal number required. */
+ if (!callout)
+ fprintf(stderr, "pcre2grep: Error in output text at offset %d: %s\n",
+ (int)(string - begin), "decimal number expected");
+ return FALSE;
+ }
+ else if (*string == 'o')
+ {
+ string++;
+
+ if (*string < '0' || *string > '7')
+ {
+ /* Syntax error: an octal number required. */
+ if (!callout)
+ fprintf(stderr, "pcre2grep: Error in output text at offset %d: %s\n",
+ (int)(string - begin), "octal number expected");
+ return FALSE;
+ }
+ }
+ else if (*string == 'x')
+ {
+ string++;
+
+ if (!isxdigit((unsigned char)*string))
+ {
+ /* Syntax error: a hexdecimal number required. */
+ if (!callout)
+ fprintf(stderr, "pcre2grep: Error in output text at offset %d: %s\n",
+ (int)(string - begin), "hexadecimal number expected");
+ return FALSE;
+ }
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+
+/*************************************************
+* Display output text *
+*************************************************/
+
+/* Display the output text, which is assumed to have already been syntax
+checked. Output may contain escape sequences started by the dollar sign. The
+escape sequences are substituted as follows:
+
+ $<digits> or ${<digits>} is replaced by the captured substring of the given
+ decimal number; zero will substitute the whole match. If the number is
+ greater than the number of capturing substrings, or if the capture is unset,
+ the replacement is empty.
+
+ $a is replaced by bell.
+ $b is replaced by backspace.
+ $e is replaced by escape.
+ $f is replaced by form feed.
+ $n is replaced by newline.
+ $r is replaced by carriage return.
+ $t is replaced by tab.
+ $v is replaced by vertical tab.
+
+ $o<digits> is replaced by the character represented by the given octal
+ number; up to three digits are processed.
+
+ $x<digits> is replaced by the character represented by the given hexadecimal
+ number; up to two digits are processed.
+
+ Any other character is substituted by itself. E.g: $$ is replaced by a single
+ dollar.
+
+Arguments:
+ string: the output text
+ callout: TRUE for the builtin callout, FALSE for --output
+ subject the start of the subject
+ ovector: capture offsets
+ capture_top: number of captures
+
+Returns: TRUE if something was output, other than newline
+ FALSE if nothing was output, or newline was last output
+*/
+
+static BOOL
+display_output_text(PCRE2_SPTR string, BOOL callout, PCRE2_SPTR subject,
+ PCRE2_SIZE *ovector, PCRE2_SIZE capture_top)
+{
+BOOL printed = FALSE;
+
+for (; *string != 0; string++)
+ {
+ int ch = EOF;
+ if (*string == '$')
+ {
+ PCRE2_SIZE capture_id = 0;
+ BOOL brace = FALSE;
+
+ string++;
+
+ if (*string == '{')
+ {
+ /* Must be a decimal number in braces, e.g: {5} or {38} */
+ string++;
+
+ brace = TRUE;
+ }
+
+ if ((*string >= '1' && *string <= '9') || (!callout && *string == '0'))
+ {
+ do
+ {
+ /* Maximum capture id is 65535. */
+ if (capture_id <= 65535)
+ capture_id = capture_id * 10 + (*string - '0');
+
+ string++;
+ }
+ while (*string >= '0' && *string <= '9');
+
+ if (!brace)
+ {
+ /* To negate the effect of the for. */
+ string--;
+ }
+
+ if (capture_id < capture_top)
+ {
+ PCRE2_SIZE capturesize;
+ capture_id *= 2;
+
+ capturesize = ovector[capture_id + 1] - ovector[capture_id];
+ if (capturesize > 0)
+ {
+ print_match(subject + ovector[capture_id], capturesize);
+ printed = TRUE;
+ }
+ }
+ }
+ else if (*string == 'a') ch = '\a';
+ else if (*string == 'b') ch = '\b';
+#ifndef EBCDIC
+ else if (*string == 'e') ch = '\033';
+#else
+ else if (*string == 'e') ch = '\047';
+#endif
+ else if (*string == 'f') ch = '\f';
+ else if (*string == 'r') ch = '\r';
+ else if (*string == 't') ch = '\t';
+ else if (*string == 'v') ch = '\v';
+ else if (*string == 'n')
+ {
+ fprintf(stdout, STDOUT_NL);
+ printed = FALSE;
+ }
+ else if (*string == 'o')
+ {
+ string++;
+
+ ch = *string - '0';
+ if (string[1] >= '0' && string[1] <= '7')
+ {
+ string++;
+ ch = ch * 8 + (*string - '0');
+ }
+ if (string[1] >= '0' && string[1] <= '7')
+ {
+ string++;
+ ch = ch * 8 + (*string - '0');
+ }
+ }
+ else if (*string == 'x')
+ {
+ string++;
+
+ if (*string >= '0' && *string <= '9')
+ ch = *string - '0';
+ else
+ ch = (*string | 0x20) - 'a' + 10;
+ if (isxdigit((unsigned char)string[1]))
+ {
+ string++;
+ ch *= 16;
+ if (*string >= '0' && *string <= '9')
+ ch += *string - '0';
+ else
+ ch += (*string | 0x20) - 'a' + 10;
+ }
+ }
+ else
+ {
+ ch = *string;
+ }
+ }
+ else
+ {
+ ch = *string;
+ }
+ if (ch != EOF)
+ {
+ fprintf(stdout, "%c", ch);
+ printed = TRUE;
+ }
+ }
+
+return printed;
+}
+
+
+#ifdef SUPPORT_PCRE2GREP_CALLOUT
+
+/*************************************************
+* Parse and execute callout scripts *
+*************************************************/
+
+/* This function parses a callout string block and executes the
+program specified by the string. The string is a list of substrings
+separated by pipe characters. The first substring represents the
+executable name, and the following substrings specify the arguments:
+
+ program_name|param1|param2|...
+
+Any substring (including the program name) can contain escape sequences
+started by the dollar character. The escape sequences are substituted as
+follows:
+
+ $<digits> or ${<digits>} is replaced by the captured substring of the given
+ decimal number, which must be greater than zero. If the number is greater
+ than the number of capturing substrings, or if the capture is unset, the
+ replacement is empty.
+
+ Any other character is substituted by itself. E.g: $$ is replaced by a single
+ dollar or $| replaced by a pipe character.
+
+Alternatively, if string starts with pipe, the remainder is taken as an output
+string, same as --output. In this case, --om-separator is used to separate each
+callout, defaulting to newline.
+
+Example:
+
+ echo -e "abcde\n12345" | pcre2grep \
+ '(.)(..(.))(?C"/bin/echo|Arg1: [$1] [$2] [$3]|Arg2: $|${1}$| ($4)")()' -
+
+ Output:
+
+ Arg1: [a] [bcd] [d] Arg2: |a| ()
+ abcde
+ Arg1: [1] [234] [4] Arg2: |1| ()
+ 12345
+
+Arguments:
+ blockptr the callout block
+
+Returns: currently it always returns with 0
+*/
+
+static int
+pcre2grep_callout(pcre2_callout_block *calloutptr, void *unused)
+{
+PCRE2_SIZE length = calloutptr->callout_string_length;
+PCRE2_SPTR string = calloutptr->callout_string;
+PCRE2_SPTR subject = calloutptr->subject;
+PCRE2_SIZE *ovector = calloutptr->offset_vector;
+PCRE2_SIZE capture_top = calloutptr->capture_top;
+PCRE2_SIZE argsvectorlen = 2;
+PCRE2_SIZE argslen = 1;
+char *args;
+char *argsptr;
+char **argsvector;
+char **argsvectorptr;
+#ifndef WIN32
+pid_t pid;
+#endif
+int result = 0;
+
+(void)unused; /* Avoid compiler warning */
+
+/* Only callout with strings are supported. */
+if (string == NULL || length == 0) return 0;
+
+/* If there's no command, output the remainder directly. */
+
+if (*string == '|')
+ {
+ string++;
+ if (!syntax_check_output_text(string, TRUE)) return 0;
+ (void)display_output_text(string, TRUE, subject, ovector, capture_top);
+ return 0;
+ }
+
+/* Checking syntax and compute the number of string fragments. Callout strings
+are ignored in case of a syntax error. */
+
+while (length > 0)
+ {
+ if (*string == '|')
+ {
+ argsvectorlen++;
+
+ /* Maximum 10000 arguments allowed. */
+ if (argsvectorlen > 10000) return 0;
+ }
+ else if (*string == '$')
+ {
+ PCRE2_SIZE capture_id = 0;
+
+ string++;
+ length--;
+
+ /* Syntax error: a character must be present after $. */
+ if (length == 0) return 0;
+
+ if (*string >= '1' && *string <= '9')
+ {
+ do
+ {
+ /* Maximum capture id is 65535. */
+ if (capture_id <= 65535)
+ capture_id = capture_id * 10 + (*string - '0');
+
+ string++;
+ length--;
+ }
+ while (length > 0 && *string >= '0' && *string <= '9');
+
+ /* To negate the effect of string++ below. */
+ string--;
+ length++;
+ }
+ else if (*string == '{')
+ {
+ /* Must be a decimal number in braces, e.g: {5} or {38} */
+ string++;
+ length--;
+
+ /* Syntax error: a decimal number required. */
+ if (length == 0) return 0;
+ if (*string < '1' || *string > '9') return 0;
+
+ do
+ {
+ /* Maximum capture id is 65535. */
+ if (capture_id <= 65535)
+ capture_id = capture_id * 10 + (*string - '0');
+
+ string++;
+ length--;
+
+ /* Syntax error: no more characters */
+ if (length == 0) return 0;
+ }
+ while (*string >= '0' && *string <= '9');
+
+ /* Syntax error: closing brace is missing. */
+ if (*string != '}') return 0;
+ }
+
+ if (capture_id > 0)
+ {
+ if (capture_id < capture_top)
+ {
+ capture_id *= 2;
+ argslen += ovector[capture_id + 1] - ovector[capture_id];
+ }
+
+ /* To negate the effect of argslen++ below. */
+ argslen--;
+ }
+ }
+
+ string++;
+ length--;
+ argslen++;
+ }
+
+args = (char*)malloc(argslen);
+if (args == NULL) return 0;
+
+argsvector = (char**)malloc(argsvectorlen * sizeof(char*));
+if (argsvector == NULL)
+ {
+ free(args);
+ return 0;
+ }
+
+argsptr = args;
+argsvectorptr = argsvector;
+
+*argsvectorptr++ = argsptr;
+
+length = calloutptr->callout_string_length;
+string = calloutptr->callout_string;
+
+while (length > 0)
+ {
+ if (*string == '|')
+ {
+ *argsptr++ = '\0';
+ *argsvectorptr++ = argsptr;
+ }
+ else if (*string == '$')
+ {
+ string++;
+ length--;
+
+ if ((*string >= '1' && *string <= '9') || *string == '{')
+ {
+ PCRE2_SIZE capture_id = 0;
+
+ if (*string != '{')
+ {
+ do
+ {
+ /* Maximum capture id is 65535. */
+ if (capture_id <= 65535)
+ capture_id = capture_id * 10 + (*string - '0');
+
+ string++;
+ length--;
+ }
+ while (length > 0 && *string >= '0' && *string <= '9');
+
+ /* To negate the effect of string++ below. */
+ string--;
+ length++;
+ }
+ else
+ {
+ string++;
+ length--;
+
+ do
+ {
+ /* Maximum capture id is 65535. */
+ if (capture_id <= 65535)
+ capture_id = capture_id * 10 + (*string - '0');
+
+ string++;
+ length--;
+ }
+ while (*string != '}');
+ }
+
+ if (capture_id < capture_top)
+ {
+ PCRE2_SIZE capturesize;
+ capture_id *= 2;
+
+ capturesize = ovector[capture_id + 1] - ovector[capture_id];
+ memcpy(argsptr, subject + ovector[capture_id], capturesize);
+ argsptr += capturesize;
+ }
+ }
+ else
+ {
+ *argsptr++ = *string;
+ }
+ }
+ else
+ {
+ *argsptr++ = *string;
+ }
+
+ string++;
+ length--;
+ }
+
+*argsptr++ = '\0';
+*argsvectorptr = NULL;
+
+#ifdef WIN32
+result = _spawnvp(_P_WAIT, argsvector[0], (const char * const *)argsvector);
+#else
+pid = fork();
+
+if (pid == 0)
+ {
+ (void)execv(argsvector[0], argsvector);
+ /* Control gets here if there is an error, e.g. a non-existent program */
+ exit(1);
+ }
+else if (pid > 0)
+ (void)waitpid(pid, &result, 0);
+#endif
+
+free(args);
+free(argsvector);
+
+/* Currently negative return values are not supported, only zero (match
+continues) or non-zero (match fails). */
+
+return result != 0;
+}
+
+#endif
+
+
+
+/*************************************************
+* Read a portion of the file into buffer *
+*************************************************/
+
+static int
+fill_buffer(void *handle, int frtype, char *buffer, int length,
+ BOOL input_line_buffered)
+{
+(void)frtype; /* Avoid warning when not used */
+
+#ifdef SUPPORT_LIBZ
+if (frtype == FR_LIBZ)
+ return gzread((gzFile)handle, buffer, length);
+else
+#endif
+
+#ifdef SUPPORT_LIBBZ2
+if (frtype == FR_LIBBZ2)
+ return BZ2_bzread((BZFILE *)handle, buffer, length);
+else
+#endif
+
+return (input_line_buffered ?
+ read_one_line(buffer, length, (FILE *)handle) :
+ fread(buffer, 1, length, (FILE *)handle));
+}
+
+
+
+/*************************************************
+* Grep an individual file *
+*************************************************/
+
+/* This is called from grep_or_recurse() below. It uses a buffer that is three
+times the value of bufthird. The matching point is never allowed to stray into
+the top third of the buffer, thus keeping more of the file available for
+context printing or for multiline scanning. For large files, the pointer will
+be in the middle third most of the time, so the bottom third is available for
+"before" context printing.
+
+Arguments:
+ handle the fopened FILE stream for a normal file
+ the gzFile pointer when reading is via libz
+ the BZFILE pointer when reading is via libbz2
+ frtype FR_PLAIN, FR_LIBZ, or FR_LIBBZ2
+ filename the file name or NULL (for errors)
+ printname the file name if it is to be printed for each match
+ or NULL if the file name is not to be printed
+ it cannot be NULL if filenames[_nomatch]_only is set
+
+Returns: 0 if there was at least one match
+ 1 otherwise (no matches)
+ 2 if an overlong line is encountered
+ 3 if there is a read error on a .bz2 file
+*/
+
+static int
+pcre2grep(void *handle, int frtype, const char *filename, const char *printname)
+{
+int rc = 1;
+int filepos = 0;
+unsigned long int linenumber = 1;
+unsigned long int lastmatchnumber = 0;
+unsigned long int count = 0;
+char *lastmatchrestart = main_buffer;
+char *ptr = main_buffer;
+char *endptr;
+PCRE2_SIZE bufflength;
+BOOL binary = FALSE;
+BOOL endhyphenpending = FALSE;
+BOOL input_line_buffered = line_buffered;
+FILE *in = NULL; /* Ensure initialized */
+
+/* Do the first read into the start of the buffer and set up the pointer to end
+of what we have. In the case of libz, a non-zipped .gz file will be read as a
+plain file. However, if a .bz2 file isn't actually bzipped, the first read will
+fail. */
+
+if (frtype != FR_LIBZ && frtype != FR_LIBBZ2)
+ {
+ in = (FILE *)handle;
+ if (is_file_tty(in)) input_line_buffered = TRUE;
+ }
+else input_line_buffered = FALSE;
+
+bufflength = fill_buffer(handle, frtype, main_buffer, bufsize,
+ input_line_buffered);
+
+#ifdef SUPPORT_LIBBZ2
+if (frtype == FR_LIBBZ2 && (int)bufflength < 0) return 2; /* Gotcha: bufflength is PCRE2_SIZE; */
+#endif
+
+endptr = main_buffer + bufflength;
+
+/* Unless binary-files=text, see if we have a binary file. This uses the same
+rule as GNU grep, namely, a search for a binary zero byte near the start of the
+file. However, when the newline convention is binary zero, we can't do this. */
+
+if (binary_files != BIN_TEXT)
+ {
+ if (endlinetype != PCRE2_NEWLINE_NUL)
+ binary = memchr(main_buffer, 0, (bufflength > 1024)? 1024 : bufflength)
+ != NULL;
+ if (binary && binary_files == BIN_NOMATCH) return 1;
+ }
+
+/* Loop while the current pointer is not at the end of the file. For large
+files, endptr will be at the end of the buffer when we are in the middle of the
+file, but ptr will never get there, because as soon as it gets over 2/3 of the
+way, the buffer is shifted left and re-filled. */
+
+while (ptr < endptr)
+ {
+ int endlinelength;
+ int mrc = 0;
+ unsigned int options = 0;
+ BOOL match;
+ char *t = ptr;
+ PCRE2_SIZE length, linelength;
+ PCRE2_SIZE startoffset = 0;
+
+ /* At this point, ptr is at the start of a line. We need to find the length
+ of the subject string to pass to pcre2_match(). In multiline mode, it is the
+ length remainder of the data in the buffer. Otherwise, it is the length of
+ the next line, excluding the terminating newline. After matching, we always
+ advance by the length of the next line. In multiline mode the PCRE2_FIRSTLINE
+ option is used for compiling, so that any match is constrained to be in the
+ first line. */
+
+ t = end_of_line(t, endptr, &endlinelength);
+ linelength = t - ptr - endlinelength;
+ length = multiline? (PCRE2_SIZE)(endptr - ptr) : linelength;
+
+ /* Check to see if the line we are looking at extends right to the very end
+ of the buffer without a line terminator. This means the line is too long to
+ handle at the current buffer size. Until the buffer reaches its maximum size,
+ try doubling it and reading more data. */
+
+ if (endlinelength == 0 && t == main_buffer + bufsize)
+ {
+ if (bufthird < max_bufthird)
+ {
+ char *new_buffer;
+ int new_bufthird = 2*bufthird;
+
+ if (new_bufthird > max_bufthird) new_bufthird = max_bufthird;
+ new_buffer = (char *)malloc(3*new_bufthird);
+
+ if (new_buffer == NULL)
+ {
+ fprintf(stderr,
+ "pcre2grep: line %lu%s%s is too long for the internal buffer\n"
+ "pcre2grep: not enough memory to increase the buffer size to %d\n",
+ linenumber,
+ (filename == NULL)? "" : " of file ",
+ (filename == NULL)? "" : filename,
+ new_bufthird);
+ return 2;
+ }
+
+ /* Copy the data and adjust pointers to the new buffer location. */
+
+ memcpy(new_buffer, main_buffer, bufsize);
+ bufthird = new_bufthird;
+ bufsize = 3*bufthird;
+ ptr = new_buffer + (ptr - main_buffer);
+ lastmatchrestart = new_buffer + (lastmatchrestart - main_buffer);
+ free(main_buffer);
+ main_buffer = new_buffer;
+
+ /* Read more data into the buffer and then try to find the line ending
+ again. */
+
+ bufflength += fill_buffer(handle, frtype, main_buffer + bufflength,
+ bufsize - bufflength, input_line_buffered);
+ endptr = main_buffer + bufflength;
+ continue;
+ }
+ else
+ {
+ fprintf(stderr,
+ "pcre2grep: line %lu%s%s is too long for the internal buffer\n"
+ "pcre2grep: the maximum buffer size is %d\n"
+ "pcre2grep: use the --max-buffer-size option to change it\n",
+ linenumber,
+ (filename == NULL)? "" : " of file ",
+ (filename == NULL)? "" : filename,
+ bufthird);
+ return 2;
+ }
+ }
+
+ /* Extra processing for Jeffrey Friedl's debugging. */
+
+#ifdef JFRIEDL_DEBUG
+ if (jfriedl_XT || jfriedl_XR)
+ {
+# include <sys/time.h>
+# include <time.h>
+ struct timeval start_time, end_time;
+ struct timezone dummy;
+ int i;
+
+ if (jfriedl_XT)
+ {
+ unsigned long newlen = length * jfriedl_XT + strlen(jfriedl_prefix) + strlen(jfriedl_postfix);
+ const char *orig = ptr;
+ ptr = malloc(newlen + 1);
+ if (!ptr) {
+ printf("out of memory");
+ pcre2grep_exit(2);
+ }
+ endptr = ptr;
+ strcpy(endptr, jfriedl_prefix); endptr += strlen(jfriedl_prefix);
+ for (i = 0; i < jfriedl_XT; i++) {
+ strncpy(endptr, orig, length);
+ endptr += length;
+ }
+ strcpy(endptr, jfriedl_postfix); endptr += strlen(jfriedl_postfix);
+ length = newlen;
+ }
+
+ if (gettimeofday(&start_time, &dummy) != 0)
+ perror("bad gettimeofday");
+
+
+ for (i = 0; i < jfriedl_XR; i++)
+ match = (pcre_exec(patterns->compiled, patterns->hint, ptr, length, 0,
+ PCRE2_NOTEMPTY, offsets, OFFSET_SIZE) >= 0);
+
+ if (gettimeofday(&end_time, &dummy) != 0)
+ perror("bad gettimeofday");
+
+ double delta = ((end_time.tv_sec + (end_time.tv_usec / 1000000.0))
+ -
+ (start_time.tv_sec + (start_time.tv_usec / 1000000.0)));
+
+ printf("%s TIMER[%.4f]\n", match ? "MATCH" : "FAIL", delta);
+ return 0;
+ }
+#endif
+
+ /* We come back here after a match when only_matching_count is non-zero, in
+ order to find any further matches in the same line. This applies to
+ --only-matching, --file-offsets, and --line-offsets. */
+
+ ONLY_MATCHING_RESTART:
+
+ /* Run through all the patterns until one matches or there is an error other
+ than NOMATCH. This code is in a subroutine so that it can be re-used for
+ finding subsequent matches when colouring matched lines. After finding one
+ match, set PCRE2_NOTEMPTY to disable any further matches of null strings in
+ this line. */
+
+ match = match_patterns(ptr, length, options, startoffset, &mrc);
+ options = PCRE2_NOTEMPTY;
+
+ /* If it's a match or a not-match (as required), do what's wanted. NOTE: Use
+ only FWRITE_IGNORE() - which is just a packaged fwrite() that ignores its
+ return code - to output data lines, so that binary zeroes are treated as just
+ another data character. */
+
+ if (match != invert)
+ {
+ BOOL hyphenprinted = FALSE;
+
+ /* We've failed if we want a file that doesn't have any matches. */
+
+ if (filenames == FN_NOMATCH_ONLY) return 1;
+
+ /* If all we want is a yes/no answer, we can return immediately. */
+
+ if (quiet) return 0;
+
+ /* Just count if just counting is wanted. */
+
+ else if (count_only || show_total_count) count++;
+
+ /* When handling a binary file and binary-files==binary, the "binary"
+ variable will be set true (it's false in all other cases). In this
+ situation we just want to output the file name. No need to scan further. */
+
+ else if (binary)
+ {
+ fprintf(stdout, "Binary file %s matches" STDOUT_NL, filename);
+ return 0;
+ }
+
+ /* Likewise, if all we want is a file name, there is no need to scan any
+ more lines in the file. */
+
+ else if (filenames == FN_MATCH_ONLY)
+ {
+ fprintf(stdout, "%s" STDOUT_NL, printname);
+ return 0;
+ }
+
+ /* The --only-matching option prints just the substring that matched,
+ and/or one or more captured portions of it, as long as these strings are
+ not empty. The --file-offsets and --line-offsets options output offsets for
+ the matching substring (all three set only_matching_count non-zero). None
+ of these mutually exclusive options prints any context. Afterwards, adjust
+ the start and then jump back to look for further matches in the same line.
+ If we are in invert mode, however, nothing is printed and we do not restart
+ - this could still be useful because the return code is set. */
+
+ else if (only_matching_count != 0)
+ {
+ if (!invert)
+ {
+ PCRE2_SIZE oldstartoffset;
+
+ if (printname != NULL) fprintf(stdout, "%s:", printname);
+ if (number) fprintf(stdout, "%lu:", linenumber);
+
+ /* Handle --line-offsets */
+
+ if (line_offsets)
+ fprintf(stdout, "%d,%d" STDOUT_NL, (int)(ptr + offsets[0] - ptr),
+ (int)(offsets[1] - offsets[0]));
+
+ /* Handle --file-offsets */
+
+ else if (file_offsets)
+ fprintf(stdout, "%d,%d" STDOUT_NL,
+ (int)(filepos + ptr + offsets[0] - ptr),
+ (int)(offsets[1] - offsets[0]));
+
+ /* Handle --output (which has already been syntax checked) */
+
+ else if (output_text != NULL)
+ {
+ if (display_output_text((PCRE2_SPTR)output_text, FALSE,
+ (PCRE2_SPTR)ptr, offsets, mrc) || printname != NULL ||
+ number)
+ fprintf(stdout, STDOUT_NL);
+ }
+
+ /* Handle --only-matching, which may occur many times */
+
+ else
+ {
+ BOOL printed = FALSE;
+ omstr *om;
+
+ for (om = only_matching; om != NULL; om = om->next)
+ {
+ int n = om->groupnum;
+ if (n < mrc)
+ {
+ int plen = offsets[2*n + 1] - offsets[2*n];
+ if (plen > 0)
+ {
+ if (printed && om_separator != NULL)
+ fprintf(stdout, "%s", om_separator);
+ print_match(ptr + offsets[n*2], plen);
+ printed = TRUE;
+ }
+ }
+ }
+
+ if (printed || printname != NULL || number)
+ fprintf(stdout, STDOUT_NL);
+ }
+
+ /* Prepare to repeat to find the next match in the line. */
+
+ match = FALSE;
+ if (line_buffered) fflush(stdout);
+ rc = 0; /* Had some success */
+
+ /* If the pattern contained a lookbehind that included \K, it is
+ possible that the end of the match might be at or before the actual
+ starting offset we have just used. In this case, start one character
+ further on. */
+
+ startoffset = offsets[1]; /* Restart after the match */
+ oldstartoffset = pcre2_get_startchar(match_data);
+ if (startoffset <= oldstartoffset)
+ {
+ if (startoffset >= length) goto END_ONE_MATCH; /* Were at end */
+ startoffset = oldstartoffset + 1;
+ if (utf) while ((ptr[startoffset] & 0xc0) == 0x80) startoffset++;
+ }
+
+ /* If the current match ended past the end of the line (only possible
+ in multiline mode), we must move on to the line in which it did end
+ before searching for more matches. */
+
+ while (startoffset > linelength)
+ {
+ ptr += linelength + endlinelength;
+ filepos += (int)(linelength + endlinelength);
+ linenumber++;
+ startoffset -= (int)(linelength + endlinelength);
+ t = end_of_line(ptr, endptr, &endlinelength);
+ linelength = t - ptr - endlinelength;
+ length = (PCRE2_SIZE)(endptr - ptr);
+ }
+
+ goto ONLY_MATCHING_RESTART;
+ }
+ }
+
+ /* This is the default case when none of the above options is set. We print
+ the matching lines(s), possibly preceded and/or followed by other lines of
+ context. */
+
+ else
+ {
+ /* See if there is a requirement to print some "after" lines from a
+ previous match. We never print any overlaps. */
+
+ if (after_context > 0 && lastmatchnumber > 0)
+ {
+ int ellength;
+ int linecount = 0;
+ char *p = lastmatchrestart;
+
+ while (p < ptr && linecount < after_context)
+ {
+ p = end_of_line(p, ptr, &ellength);
+ linecount++;
+ }
+
+ /* It is important to advance lastmatchrestart during this printing so
+ that it interacts correctly with any "before" printing below. Print
+ each line's data using fwrite() in case there are binary zeroes. */
+
+ while (lastmatchrestart < p)
+ {
+ char *pp = lastmatchrestart;
+ if (printname != NULL) fprintf(stdout, "%s-", printname);
+ if (number) fprintf(stdout, "%lu-", lastmatchnumber++);
+ pp = end_of_line(pp, endptr, &ellength);
+ FWRITE_IGNORE(lastmatchrestart, 1, pp - lastmatchrestart, stdout);
+ lastmatchrestart = pp;
+ }
+ if (lastmatchrestart != ptr) hyphenpending = TRUE;
+ }
+
+ /* If there were non-contiguous lines printed above, insert hyphens. */
+
+ if (hyphenpending)
+ {
+ fprintf(stdout, "--" STDOUT_NL);
+ hyphenpending = FALSE;
+ hyphenprinted = TRUE;
+ }
+
+ /* See if there is a requirement to print some "before" lines for this
+ match. Again, don't print overlaps. */
+
+ if (before_context > 0)
+ {
+ int linecount = 0;
+ char *p = ptr;
+
+ while (p > main_buffer && (lastmatchnumber == 0 || p > lastmatchrestart) &&
+ linecount < before_context)
+ {
+ linecount++;
+ p = previous_line(p, main_buffer);
+ }
+
+ if (lastmatchnumber > 0 && p > lastmatchrestart && !hyphenprinted)
+ fprintf(stdout, "--" STDOUT_NL);
+
+ while (p < ptr)
+ {
+ int ellength;
+ char *pp = p;
+ if (printname != NULL) fprintf(stdout, "%s-", printname);
+ if (number) fprintf(stdout, "%lu-", linenumber - linecount--);
+ pp = end_of_line(pp, endptr, &ellength);
+ FWRITE_IGNORE(p, 1, pp - p, stdout);
+ p = pp;
+ }
+ }
+
+ /* Now print the matching line(s); ensure we set hyphenpending at the end
+ of the file if any context lines are being output. */
+
+ if (after_context > 0 || before_context > 0)
+ endhyphenpending = TRUE;
+
+ if (printname != NULL) fprintf(stdout, "%s:", printname);
+ if (number) fprintf(stdout, "%lu:", linenumber);
+
+ /* This extra option, for Jeffrey Friedl's debugging requirements,
+ replaces the matched string, or a specific captured string if it exists,
+ with X. When this happens, colouring is ignored. */
+
+#ifdef JFRIEDL_DEBUG
+ if (S_arg >= 0 && S_arg < mrc)
+ {
+ int first = S_arg * 2;
+ int last = first + 1;
+ FWRITE_IGNORE(ptr, 1, offsets[first], stdout);
+ fprintf(stdout, "X");
+ FWRITE_IGNORE(ptr + offsets[last], 1, linelength - offsets[last], stdout);
+ }
+ else
+#endif
+
+ /* In multiline mode, or if colouring, we have to split the line(s) up
+ and search for further matches, but not of course if the line is a
+ non-match. In multiline mode this is necessary in case there is another
+ match that spans the end of the current line. When colouring we want to
+ colour all matches. */
+
+ if ((multiline || do_colour) && !invert)
+ {
+ int plength;
+ PCRE2_SIZE endprevious;
+
+ /* The use of \K may make the end offset earlier than the start. In
+ this situation, swap them round. */
+
+ if (offsets[0] > offsets[1])
+ {
+ PCRE2_SIZE temp = offsets[0];
+ offsets[0] = offsets[1];
+ offsets[1] = temp;
+ }
+
+ FWRITE_IGNORE(ptr, 1, offsets[0], stdout);
+ print_match(ptr + offsets[0], offsets[1] - offsets[0]);
+
+ for (;;)
+ {
+ PCRE2_SIZE oldstartoffset = pcre2_get_startchar(match_data);
+
+ endprevious = offsets[1];
+ startoffset = endprevious; /* Advance after previous match. */
+
+ /* If the pattern contained a lookbehind that included \K, it is
+ possible that the end of the match might be at or before the actual
+ starting offset we have just used. In this case, start one character
+ further on. */
+
+ if (startoffset <= oldstartoffset)
+ {
+ startoffset = oldstartoffset + 1;
+ if (utf) while ((ptr[startoffset] & 0xc0) == 0x80) startoffset++;
+ }
+
+ /* If the current match ended past the end of the line (only possible
+ in multiline mode), we must move on to the line in which it did end
+ before searching for more matches. Because the PCRE2_FIRSTLINE option
+ is set, the start of the match will always be before the first
+ newline sequence. */
+
+ while (startoffset > linelength + endlinelength)
+ {
+ ptr += linelength + endlinelength;
+ filepos += (int)(linelength + endlinelength);
+ linenumber++;
+ startoffset -= (int)(linelength + endlinelength);
+ endprevious -= (int)(linelength + endlinelength);
+ t = end_of_line(ptr, endptr, &endlinelength);
+ linelength = t - ptr - endlinelength;
+ length = (PCRE2_SIZE)(endptr - ptr);
+ }
+
+ /* If startoffset is at the exact end of the line it means this
+ complete line was the final part of the match, so there is nothing
+ more to do. */
+
+ if (startoffset == linelength + endlinelength) break;
+
+ /* Otherwise, run a match from within the final line, and if found,
+ loop for any that may follow. */
+
+ if (!match_patterns(ptr, length, options, startoffset, &mrc)) break;
+
+ /* The use of \K may make the end offset earlier than the start. In
+ this situation, swap them round. */
+
+ if (offsets[0] > offsets[1])
+ {
+ PCRE2_SIZE temp = offsets[0];
+ offsets[0] = offsets[1];
+ offsets[1] = temp;
+ }
+
+ FWRITE_IGNORE(ptr + endprevious, 1, offsets[0] - endprevious, stdout);
+ print_match(ptr + offsets[0], offsets[1] - offsets[0]);
+ }
+
+ /* In multiline mode, we may have already printed the complete line
+ and its line-ending characters (if they matched the pattern), so there
+ may be no more to print. */
+
+ plength = (int)((linelength + endlinelength) - endprevious);
+ if (plength > 0) FWRITE_IGNORE(ptr + endprevious, 1, plength, stdout);
+ }
+
+ /* Not colouring or multiline; no need to search for further matches. */
+
+ else FWRITE_IGNORE(ptr, 1, linelength + endlinelength, stdout);
+ }
+
+ /* End of doing what has to be done for a match. If --line-buffered was
+ given, flush the output. */
+
+ if (line_buffered) fflush(stdout);
+ rc = 0; /* Had some success */
+
+ /* Remember where the last match happened for after_context. We remember
+ where we are about to restart, and that line's number. */
+
+ lastmatchrestart = ptr + linelength + endlinelength;
+ lastmatchnumber = linenumber + 1;
+ }
+
+ /* For a match in multiline inverted mode (which of course did not cause
+ anything to be printed), we have to move on to the end of the match before
+ proceeding. */
+
+ if (multiline && invert && match)
+ {
+ int ellength;
+ char *endmatch = ptr + offsets[1];
+ t = ptr;
+ while (t < endmatch)
+ {
+ t = end_of_line(t, endptr, &ellength);
+ if (t <= endmatch) linenumber++; else break;
+ }
+ endmatch = end_of_line(endmatch, endptr, &ellength);
+ linelength = endmatch - ptr - ellength;
+ }
+
+ /* Advance to after the newline and increment the line number. The file
+ offset to the current line is maintained in filepos. */
+
+ END_ONE_MATCH:
+ ptr += linelength + endlinelength;
+ filepos += (int)(linelength + endlinelength);
+ linenumber++;
+
+ /* If input is line buffered, and the buffer is not yet full, read another
+ line and add it into the buffer. */
+
+ if (input_line_buffered && bufflength < (PCRE2_SIZE)bufsize)
+ {
+ int add = read_one_line(ptr, bufsize - (int)(ptr - main_buffer), in);
+ bufflength += add;
+ endptr += add;
+ }
+
+ /* If we haven't yet reached the end of the file (the buffer is full), and
+ the current point is in the top 1/3 of the buffer, slide the buffer down by
+ 1/3 and refill it. Before we do this, if some unprinted "after" lines are
+ about to be lost, print them. */
+
+ if (bufflength >= (PCRE2_SIZE)bufsize && ptr > main_buffer + 2*bufthird)
+ {
+ if (after_context > 0 &&
+ lastmatchnumber > 0 &&
+ lastmatchrestart < main_buffer + bufthird)
+ {
+ do_after_lines(lastmatchnumber, lastmatchrestart, endptr, printname);
+ lastmatchnumber = 0; /* Indicates no after lines pending */
+ }
+
+ /* Now do the shuffle */
+
+ (void)memmove(main_buffer, main_buffer + bufthird, 2*bufthird);
+ ptr -= bufthird;
+
+ bufflength = 2*bufthird + fill_buffer(handle, frtype,
+ main_buffer + 2*bufthird, bufthird, input_line_buffered);
+ endptr = main_buffer + bufflength;
+
+ /* Adjust any last match point */
+
+ if (lastmatchnumber > 0) lastmatchrestart -= bufthird;
+ }
+ } /* Loop through the whole file */
+
+/* End of file; print final "after" lines if wanted; do_after_lines sets
+hyphenpending if it prints something. */
+
+if (only_matching_count == 0 && !(count_only|show_total_count))
+ {
+ do_after_lines(lastmatchnumber, lastmatchrestart, endptr, printname);
+ hyphenpending |= endhyphenpending;
+ }
+
+/* Print the file name if we are looking for those without matches and there
+were none. If we found a match, we won't have got this far. */
+
+if (filenames == FN_NOMATCH_ONLY)
+ {
+ fprintf(stdout, "%s" STDOUT_NL, printname);
+ return 0;
+ }
+
+/* Print the match count if wanted */
+
+if (count_only && !quiet)
+ {
+ if (count > 0 || !omit_zero_count)
+ {
+ if (printname != NULL && filenames != FN_NONE)
+ fprintf(stdout, "%s:", printname);
+ fprintf(stdout, "%lu" STDOUT_NL, count);
+ counts_printed++;
+ }
+ }
+
+total_count += count; /* Can be set without count_only */
+return rc;
+}
+
+
+
+/*************************************************
+* Grep a file or recurse into a directory *
+*************************************************/
+
+/* Given a path name, if it's a directory, scan all the files if we are
+recursing; if it's a file, grep it.
+
+Arguments:
+ pathname the path to investigate
+ dir_recurse TRUE if recursing is wanted (-r or -drecurse)
+ only_one_at_top TRUE if the path is the only one at toplevel
+
+Returns: -1 the file/directory was skipped
+ 0 if there was at least one match
+ 1 if there were no matches
+ 2 there was some kind of error
+
+However, file opening failures are suppressed if "silent" is set.
+*/
+
+static int
+grep_or_recurse(char *pathname, BOOL dir_recurse, BOOL only_one_at_top)
+{
+int rc = 1;
+int frtype;
+void *handle;
+char *lastcomp;
+FILE *in = NULL; /* Ensure initialized */
+
+#ifdef SUPPORT_LIBZ
+gzFile ingz = NULL;
+#endif
+
+#ifdef SUPPORT_LIBBZ2
+BZFILE *inbz2 = NULL;
+#endif
+
+#if defined SUPPORT_LIBZ || defined SUPPORT_LIBBZ2
+int pathlen;
+#endif
+
+#if defined NATIVE_ZOS
+int zos_type;
+FILE *zos_test_file;
+#endif
+
+/* If the file name is "-" we scan stdin */
+
+if (strcmp(pathname, "-") == 0)
+ {
+ return pcre2grep(stdin, FR_PLAIN, stdin_name,
+ (filenames > FN_DEFAULT || (filenames == FN_DEFAULT && !only_one_at_top))?
+ stdin_name : NULL);
+ }
+
+/* Inclusion and exclusion: --include-dir and --exclude-dir apply only to
+directories, whereas --include and --exclude apply to everything else. The test
+is against the final component of the path. */
+
+lastcomp = strrchr(pathname, FILESEP);
+lastcomp = (lastcomp == NULL)? pathname : lastcomp + 1;
+
+/* If the file is a directory, skip if not recursing or if explicitly excluded.
+Otherwise, scan the directory and recurse for each path within it. The scanning
+code is localized so it can be made system-specific. */
+
+
+/* For z/OS, determine the file type. */
+
+#if defined NATIVE_ZOS
+zos_test_file = fopen(pathname,"rb");
+
+if (zos_test_file == NULL)
+ {
+ if (!silent) fprintf(stderr, "pcre2grep: failed to test next file %s\n",
+ pathname, strerror(errno));
+ return -1;
+ }
+zos_type = identifyzosfiletype (zos_test_file);
+fclose (zos_test_file);
+
+/* Handle a PDS in separate code */
+
+if (zos_type == __ZOS_PDS || zos_type == __ZOS_PDSE)
+ {
+ return travelonpdsdir (pathname, only_one_at_top);
+ }
+
+/* Deal with regular files in the normal way below. These types are:
+ zos_type == __ZOS_PDS_MEMBER
+ zos_type == __ZOS_PS
+ zos_type == __ZOS_VSAM_KSDS
+ zos_type == __ZOS_VSAM_ESDS
+ zos_type == __ZOS_VSAM_RRDS
+*/
+
+/* Handle a z/OS directory using common code. */
+
+else if (zos_type == __ZOS_HFS)
+ {
+#endif /* NATIVE_ZOS */
+
+
+/* Handle directories: common code for all OS */
+
+if (isdirectory(pathname))
+ {
+ if (dee_action == dee_SKIP ||
+ !test_incexc(lastcomp, include_dir_patterns, exclude_dir_patterns))
+ return -1;
+
+ if (dee_action == dee_RECURSE)
+ {
+ char buffer[FNBUFSIZ];
+ char *nextfile;
+ directory_type *dir = opendirectory(pathname);
+
+ if (dir == NULL)
+ {
+ if (!silent)
+ fprintf(stderr, "pcre2grep: Failed to open directory %s: %s\n", pathname,
+ strerror(errno));
+ return 2;
+ }
+
+ while ((nextfile = readdirectory(dir)) != NULL)
+ {
+ int frc;
+ int fnlength = strlen(pathname) + strlen(nextfile) + 2;
+ if (fnlength > FNBUFSIZ)
+ {
+ fprintf(stderr, "pcre2grep: recursive filename is too long\n");
+ rc = 2;
+ break;
+ }
+ sprintf(buffer, "%s%c%s", pathname, FILESEP, nextfile);
+ frc = grep_or_recurse(buffer, dir_recurse, FALSE);
+ if (frc > 1) rc = frc;
+ else if (frc == 0 && rc == 1) rc = 0;
+ }
+
+ closedirectory(dir);
+ return rc;
+ }
+ }
+
+#ifdef WIN32
+if (iswild(pathname))
+ {
+ char buffer[1024];
+ char *nextfile;
+ char *name;
+ directory_type *dir = opendirectory(pathname);
+
+ if (dir == NULL)
+ return 0;
+
+ for (nextfile = name = pathname; *nextfile != 0; nextfile++)
+ if (*nextfile == '/' || *nextfile == '\\')
+ name = nextfile + 1;
+ *name = 0;
+
+ while ((nextfile = readdirectory(dir)) != NULL)
+ {
+ int frc;
+ sprintf(buffer, "%.512s%.128s", pathname, nextfile);
+ frc = grep_or_recurse(buffer, dir_recurse, FALSE);
+ if (frc > 1) rc = frc;
+ else if (frc == 0 && rc == 1) rc = 0;
+ }
+
+ closedirectory(dir);
+ return rc;
+ }
+#endif
+
+#if defined NATIVE_ZOS
+ }
+#endif
+
+/* If the file is not a directory, check for a regular file, and if it is not,
+skip it if that's been requested. Otherwise, check for an explicit inclusion or
+exclusion. */
+
+else if (
+#if defined NATIVE_ZOS
+ (zos_type == __ZOS_NOFILE && DEE_action == DEE_SKIP) ||
+#else /* all other OS */
+ (!isregfile(pathname) && DEE_action == DEE_SKIP) ||
+#endif
+ !test_incexc(lastcomp, include_patterns, exclude_patterns))
+ return -1; /* File skipped */
+
+/* Control reaches here if we have a regular file, or if we have a directory
+and recursion or skipping was not requested, or if we have anything else and
+skipping was not requested. The scan proceeds. If this is the first and only
+argument at top level, we don't show the file name, unless we are only showing
+the file name, or the filename was forced (-H). */
+
+#if defined SUPPORT_LIBZ || defined SUPPORT_LIBBZ2
+pathlen = (int)(strlen(pathname));
+#endif
+
+/* Open using zlib if it is supported and the file name ends with .gz. */
+
+#ifdef SUPPORT_LIBZ
+if (pathlen > 3 && strcmp(pathname + pathlen - 3, ".gz") == 0)
+ {
+ ingz = gzopen(pathname, "rb");
+ if (ingz == NULL)
+ {
+ if (!silent)
+ fprintf(stderr, "pcre2grep: Failed to open %s: %s\n", pathname,
+ strerror(errno));
+ return 2;
+ }
+ handle = (void *)ingz;
+ frtype = FR_LIBZ;
+ }
+else
+#endif
+
+/* Otherwise open with bz2lib if it is supported and the name ends with .bz2. */
+
+#ifdef SUPPORT_LIBBZ2
+if (pathlen > 4 && strcmp(pathname + pathlen - 4, ".bz2") == 0)
+ {
+ inbz2 = BZ2_bzopen(pathname, "rb");
+ handle = (void *)inbz2;
+ frtype = FR_LIBBZ2;
+ }
+else
+#endif
+
+/* Otherwise use plain fopen(). The label is so that we can come back here if
+an attempt to read a .bz2 file indicates that it really is a plain file. */
+
+#ifdef SUPPORT_LIBBZ2
+PLAIN_FILE:
+#endif
+ {
+ in = fopen(pathname, "rb");
+ handle = (void *)in;
+ frtype = FR_PLAIN;
+ }
+
+/* All the opening methods return errno when they fail. */
+
+if (handle == NULL)
+ {
+ if (!silent)
+ fprintf(stderr, "pcre2grep: Failed to open %s: %s\n", pathname,
+ strerror(errno));
+ return 2;
+ }
+
+/* Now grep the file */
+
+rc = pcre2grep(handle, frtype, pathname, (filenames > FN_DEFAULT ||
+ (filenames == FN_DEFAULT && !only_one_at_top))? pathname : NULL);
+
+/* Close in an appropriate manner. */
+
+#ifdef SUPPORT_LIBZ
+if (frtype == FR_LIBZ)
+ gzclose(ingz);
+else
+#endif
+
+/* If it is a .bz2 file and the result is 3, it means that the first attempt to
+read failed. If the error indicates that the file isn't in fact bzipped, try
+again as a normal file. */
+
+#ifdef SUPPORT_LIBBZ2
+if (frtype == FR_LIBBZ2)
+ {
+ if (rc == 3)
+ {
+ int errnum;
+ const char *err = BZ2_bzerror(inbz2, &errnum);
+ if (errnum == BZ_DATA_ERROR_MAGIC)
+ {
+ BZ2_bzclose(inbz2);
+ goto PLAIN_FILE;
+ }
+ else if (!silent)
+ fprintf(stderr, "pcre2grep: Failed to read %s using bzlib: %s\n",
+ pathname, err);
+ rc = 2; /* The normal "something went wrong" code */
+ }
+ BZ2_bzclose(inbz2);
+ }
+else
+#endif
+
+/* Normal file close */
+
+fclose(in);
+
+/* Pass back the yield from pcre2grep(). */
+
+return rc;
+}
+
+
+
+/*************************************************
+* Handle a single-letter, no data option *
+*************************************************/
+
+static int
+handle_option(int letter, int options)
+{
+switch(letter)
+ {
+ case N_FOFFSETS: file_offsets = TRUE; break;
+ case N_HELP: help(); pcre2grep_exit(0); break; /* Stops compiler warning */
+ case N_LBUFFER: line_buffered = TRUE; break;
+ case N_LOFFSETS: line_offsets = number = TRUE; break;
+ case N_NOJIT: use_jit = FALSE; break;
+ case 'a': binary_files = BIN_TEXT; break;
+ case 'c': count_only = TRUE; break;
+ case 'F': options |= PCRE2_LITERAL; break;
+ case 'H': filenames = FN_FORCE; break;
+ case 'I': binary_files = BIN_NOMATCH; break;
+ case 'h': filenames = FN_NONE; break;
+ case 'i': options |= PCRE2_CASELESS; break;
+ case 'l': omit_zero_count = TRUE; filenames = FN_MATCH_ONLY; break;
+ case 'L': filenames = FN_NOMATCH_ONLY; break;
+ case 'M': multiline = TRUE; options |= PCRE2_MULTILINE|PCRE2_FIRSTLINE; break;
+ case 'n': number = TRUE; break;
+
+ case 'o':
+ only_matching_last = add_number(0, only_matching_last);
+ if (only_matching == NULL) only_matching = only_matching_last;
+ break;
+
+ case 'q': quiet = TRUE; break;
+ case 'r': dee_action = dee_RECURSE; break;
+ case 's': silent = TRUE; break;
+ case 't': show_total_count = TRUE; break;
+ case 'u': options |= PCRE2_UTF; utf = TRUE; break;
+ case 'v': invert = TRUE; break;
+ case 'w': extra_options |= PCRE2_EXTRA_MATCH_WORD; break;
+ case 'x': extra_options |= PCRE2_EXTRA_MATCH_LINE; break;
+
+ case 'V':
+ {
+ unsigned char buffer[128];
+ (void)pcre2_config(PCRE2_CONFIG_VERSION, buffer);
+ fprintf(stdout, "pcre2grep version %s" STDOUT_NL, buffer);
+ }
+ pcre2grep_exit(0);
+ break;
+
+ default:
+ fprintf(stderr, "pcre2grep: Unknown option -%c\n", letter);
+ pcre2grep_exit(usage(2));
+ }
+
+return options;
+}
+
+
+
+/*************************************************
+* Construct printed ordinal *
+*************************************************/
+
+/* This turns a number into "1st", "3rd", etc. */
+
+static char *
+ordin(int n)
+{
+static char buffer[14];
+char *p = buffer;
+sprintf(p, "%d", n);
+while (*p != 0) p++;
+n %= 100;
+if (n >= 11 && n <= 13) n = 0;
+switch (n%10)
+ {
+ case 1: strcpy(p, "st"); break;
+ case 2: strcpy(p, "nd"); break;
+ case 3: strcpy(p, "rd"); break;
+ default: strcpy(p, "th"); break;
+ }
+return buffer;
+}
+
+
+
+/*************************************************
+* Compile a single pattern *
+*************************************************/
+
+/* Do nothing if the pattern has already been compiled. This is the case for
+include/exclude patterns read from a file.
+
+When the -F option has been used, each "pattern" may be a list of strings,
+separated by line breaks. They will be matched literally. We split such a
+string and compile the first substring, inserting an additional block into the
+pattern chain.
+
+Arguments:
+ p points to the pattern block
+ options the PCRE options
+ fromfile TRUE if the pattern was read from a file
+ fromtext file name or identifying text (e.g. "include")
+ count 0 if this is the only command line pattern, or
+ number of the command line pattern, or
+ linenumber for a pattern from a file
+
+Returns: TRUE on success, FALSE after an error
+*/
+
+static BOOL
+compile_pattern(patstr *p, int options, int fromfile, const char *fromtext,
+ int count)
+{
+char *ps;
+int errcode;
+PCRE2_SIZE patlen, erroffset;
+PCRE2_UCHAR errmessbuffer[ERRBUFSIZ];
+
+if (p->compiled != NULL) return TRUE;
+ps = p->string;
+patlen = p->length;
+
+if ((options & PCRE2_LITERAL) != 0)
+ {
+ int ellength;
+ char *eop = ps + patlen;
+ char *pe = end_of_line(ps, eop, &ellength);
+
+ if (ellength != 0)
+ {
+ patlen = pe - ps - ellength;
+ if (add_pattern(pe, p->length-patlen-ellength, p) == NULL) return FALSE;
+ }
+ }
+
+p->compiled = pcre2_compile((PCRE2_SPTR)ps, patlen, options, &errcode,
+ &erroffset, compile_context);
+
+/* Handle successful compile. Try JIT-compiling if supported and enabled. We
+ignore any JIT compiler errors, relying falling back to interpreting if
+anything goes wrong with JIT. */
+
+if (p->compiled != NULL)
+ {
+#ifdef SUPPORT_PCRE2GREP_JIT
+ if (use_jit) (void)pcre2_jit_compile(p->compiled, PCRE2_JIT_COMPLETE);
+#endif
+ return TRUE;
+ }
+
+/* Handle compile errors */
+
+if (erroffset > patlen) erroffset = patlen;
+pcre2_get_error_message(errcode, errmessbuffer, sizeof(errmessbuffer));
+
+if (fromfile)
+ {
+ fprintf(stderr, "pcre2grep: Error in regex in line %d of %s "
+ "at offset %d: %s\n", count, fromtext, (int)erroffset, errmessbuffer);
+ }
+else
+ {
+ if (count == 0)
+ fprintf(stderr, "pcre2grep: Error in %s regex at offset %d: %s\n",
+ fromtext, (int)erroffset, errmessbuffer);
+ else
+ fprintf(stderr, "pcre2grep: Error in %s %s regex at offset %d: %s\n",
+ ordin(count), fromtext, (int)erroffset, errmessbuffer);
+ }
+
+return FALSE;
+}
+
+
+
+/*************************************************
+* Read and compile a file of patterns *
+*************************************************/
+
+/* This is used for --filelist, --include-from, and --exclude-from.
+
+Arguments:
+ name the name of the file; "-" is stdin
+ patptr pointer to the pattern chain anchor
+ patlastptr pointer to the last pattern pointer
+
+Returns: TRUE if all went well
+*/
+
+static BOOL
+read_pattern_file(char *name, patstr **patptr, patstr **patlastptr)
+{
+int linenumber = 0;
+PCRE2_SIZE patlen;
+FILE *f;
+const char *filename;
+char buffer[MAXPATLEN+20];
+
+if (strcmp(name, "-") == 0)
+ {
+ f = stdin;
+ filename = stdin_name;
+ }
+else
+ {
+ f = fopen(name, "r");
+ if (f == NULL)
+ {
+ fprintf(stderr, "pcre2grep: Failed to open %s: %s\n", name, strerror(errno));
+ return FALSE;
+ }
+ filename = name;
+ }
+
+while ((patlen = read_one_line(buffer, sizeof(buffer), f)) > 0)
+ {
+ while (patlen > 0 && isspace((unsigned char)(buffer[patlen-1]))) patlen--;
+ linenumber++;
+ if (patlen == 0) continue; /* Skip blank lines */
+
+ /* Note: this call to add_pattern() puts a pointer to the local variable
+ "buffer" into the pattern chain. However, that pointer is used only when
+ compiling the pattern, which happens immediately below, so we flatten it
+ afterwards, as a precaution against any later code trying to use it. */
+
+ *patlastptr = add_pattern(buffer, patlen, *patlastptr);
+ if (*patlastptr == NULL)
+ {
+ if (f != stdin) fclose(f);
+ return FALSE;
+ }
+ if (*patptr == NULL) *patptr = *patlastptr;
+
+ /* This loop is needed because compiling a "pattern" when -F is set may add
+ on additional literal patterns if the original contains a newline. In the
+ common case, it never will, because read_one_line() stops at a newline.
+ However, the -N option can be used to give pcre2grep a different newline
+ setting. */
+
+ for(;;)
+ {
+ if (!compile_pattern(*patlastptr, pcre2_options, TRUE, filename,
+ linenumber))
+ {
+ if (f != stdin) fclose(f);
+ return FALSE;
+ }
+ (*patlastptr)->string = NULL; /* Insurance */
+ if ((*patlastptr)->next == NULL) break;
+ *patlastptr = (*patlastptr)->next;
+ }
+ }
+
+if (f != stdin) fclose(f);
+return TRUE;
+}
+
+
+
+/*************************************************
+* Main program *
+*************************************************/
+
+/* Returns 0 if something matched, 1 if nothing matched, 2 after an error. */
+
+int
+main(int argc, char **argv)
+{
+int i, j;
+int rc = 1;
+BOOL only_one_at_top;
+patstr *cp;
+fnstr *fn;
+const char *locale_from = "--locale";
+
+#ifdef SUPPORT_PCRE2GREP_JIT
+pcre2_jit_stack *jit_stack = NULL;
+#endif
+
+/* In Windows, stdout is set up as a text stream, which means that \n is
+converted to \r\n. This causes output lines that are copied from the input to
+change from ....\r\n to ....\r\r\n, which is not right. We therefore ensure
+that stdout is a binary stream. Note that this means all other output to stdout
+must use STDOUT_NL to terminate lines. */
+
+#ifdef WIN32
+_setmode(_fileno(stdout), _O_BINARY);
+#endif
+
+/* Set up a default compile and match contexts and a match data block. */
+
+compile_context = pcre2_compile_context_create(NULL);
+match_context = pcre2_match_context_create(NULL);
+match_data = pcre2_match_data_create(OFFSET_SIZE, NULL);
+offsets = pcre2_get_ovector_pointer(match_data);
+
+/* If string (script) callouts are supported, set up the callout processing
+function. */
+
+#ifdef SUPPORT_PCRE2GREP_CALLOUT
+pcre2_set_callout(match_context, pcre2grep_callout, NULL);
+#endif
+
+/* Process the options */
+
+for (i = 1; i < argc; i++)
+ {
+ option_item *op = NULL;
+ char *option_data = (char *)""; /* default to keep compiler happy */
+ BOOL longop;
+ BOOL longopwasequals = FALSE;
+
+ if (argv[i][0] != '-') break;
+
+ /* If we hit an argument that is just "-", it may be a reference to STDIN,
+ but only if we have previously had -e or -f to define the patterns. */
+
+ if (argv[i][1] == 0)
+ {
+ if (pattern_files != NULL || patterns != NULL) break;
+ else pcre2grep_exit(usage(2));
+ }
+
+ /* Handle a long name option, or -- to terminate the options */
+
+ if (argv[i][1] == '-')
+ {
+ char *arg = argv[i] + 2;
+ char *argequals = strchr(arg, '=');
+
+ if (*arg == 0) /* -- terminates options */
+ {
+ i++;
+ break; /* out of the options-handling loop */
+ }
+
+ longop = TRUE;
+
+ /* Some long options have data that follows after =, for example file=name.
+ Some options have variations in the long name spelling: specifically, we
+ allow "regexp" because GNU grep allows it, though I personally go along
+ with Jeffrey Friedl and Larry Wall in preferring "regex" without the "p".
+ These options are entered in the table as "regex(p)". Options can be in
+ both these categories. */
+
+ for (op = optionlist; op->one_char != 0; op++)
+ {
+ char *opbra = strchr(op->long_name, '(');
+ char *equals = strchr(op->long_name, '=');
+
+ /* Handle options with only one spelling of the name */
+
+ if (opbra == NULL) /* Does not contain '(' */
+ {
+ if (equals == NULL) /* Not thing=data case */
+ {
+ if (strcmp(arg, op->long_name) == 0) break;
+ }
+ else /* Special case xxx=data */
+ {
+ int oplen = (int)(equals - op->long_name);
+ int arglen = (argequals == NULL)?
+ (int)strlen(arg) : (int)(argequals - arg);
+ if (oplen == arglen && strncmp(arg, op->long_name, oplen) == 0)
+ {
+ option_data = arg + arglen;
+ if (*option_data == '=')
+ {
+ option_data++;
+ longopwasequals = TRUE;
+ }
+ break;
+ }
+ }
+ }
+
+ /* Handle options with an alternate spelling of the name */
+
+ else
+ {
+ char buff1[24];
+ char buff2[24];
+ int ret;
+
+ int baselen = (int)(opbra - op->long_name);
+ int fulllen = (int)(strchr(op->long_name, ')') - op->long_name + 1);
+ int arglen = (argequals == NULL || equals == NULL)?
+ (int)strlen(arg) : (int)(argequals - arg);
+
+ if ((ret = snprintf(buff1, sizeof(buff1), "%.*s", baselen, op->long_name),
+ ret < 0 || ret > (int)sizeof(buff1)) ||
+ (ret = snprintf(buff2, sizeof(buff2), "%s%.*s", buff1,
+ fulllen - baselen - 2, opbra + 1),
+ ret < 0 || ret > (int)sizeof(buff2)))
+ {
+ fprintf(stderr, "pcre2grep: Buffer overflow when parsing %s option\n",
+ op->long_name);
+ pcre2grep_exit(2);
+ }
+
+ if (strncmp(arg, buff1, arglen) == 0 ||
+ strncmp(arg, buff2, arglen) == 0)
+ {
+ if (equals != NULL && argequals != NULL)
+ {
+ option_data = argequals;
+ if (*option_data == '=')
+ {
+ option_data++;
+ longopwasequals = TRUE;
+ }
+ }
+ break;
+ }
+ }
+ }
+
+ if (op->one_char == 0)
+ {
+ fprintf(stderr, "pcre2grep: Unknown option %s\n", argv[i]);
+ pcre2grep_exit(usage(2));
+ }
+ }
+
+ /* Jeffrey Friedl's debugging harness uses these additional options which
+ are not in the right form for putting in the option table because they use
+ only one hyphen, yet are more than one character long. By putting them
+ separately here, they will not get displayed as part of the help() output,
+ but I don't think Jeffrey will care about that. */
+
+#ifdef JFRIEDL_DEBUG
+ else if (strcmp(argv[i], "-pre") == 0) {
+ jfriedl_prefix = argv[++i];
+ continue;
+ } else if (strcmp(argv[i], "-post") == 0) {
+ jfriedl_postfix = argv[++i];
+ continue;
+ } else if (strcmp(argv[i], "-XT") == 0) {
+ sscanf(argv[++i], "%d", &jfriedl_XT);
+ continue;
+ } else if (strcmp(argv[i], "-XR") == 0) {
+ sscanf(argv[++i], "%d", &jfriedl_XR);
+ continue;
+ }
+#endif
+
+
+ /* One-char options; many that have no data may be in a single argument; we
+ continue till we hit the last one or one that needs data. */
+
+ else
+ {
+ char *s = argv[i] + 1;
+ longop = FALSE;
+
+ while (*s != 0)
+ {
+ for (op = optionlist; op->one_char != 0; op++)
+ {
+ if (*s == op->one_char) break;
+ }
+ if (op->one_char == 0)
+ {
+ fprintf(stderr, "pcre2grep: Unknown option letter '%c' in \"%s\"\n",
+ *s, argv[i]);
+ pcre2grep_exit(usage(2));
+ }
+
+ option_data = s+1;
+
+ /* Break out if this is the last character in the string; it's handled
+ below like a single multi-char option. */
+
+ if (*option_data == 0) break;
+
+ /* Check for a single-character option that has data: OP_OP_NUMBER(S)
+ are used for ones that either have a numerical number or defaults, i.e.
+ the data is optional. If a digit follows, there is data; if not, carry on
+ with other single-character options in the same string. */
+
+ if (op->type == OP_OP_NUMBER || op->type == OP_OP_NUMBERS)
+ {
+ if (isdigit((unsigned char)s[1])) break;
+ }
+ else /* Check for an option with data */
+ {
+ if (op->type != OP_NODATA) break;
+ }
+
+ /* Handle a single-character option with no data, then loop for the
+ next character in the string. */
+
+ pcre2_options = handle_option(*s++, pcre2_options);
+ }
+ }
+
+ /* At this point we should have op pointing to a matched option. If the type
+ is NO_DATA, it means that there is no data, and the option might set
+ something in the PCRE options. */
+
+ if (op->type == OP_NODATA)
+ {
+ pcre2_options = handle_option(op->one_char, pcre2_options);
+ continue;
+ }
+
+ /* If the option type is OP_OP_STRING or OP_OP_NUMBER(S), it's an option that
+ either has a value or defaults to something. It cannot have data in a
+ separate item. At the moment, the only such options are "colo(u)r",
+ "only-matching", and Jeffrey Friedl's special -S debugging option. */
+
+ if (*option_data == 0 &&
+ (op->type == OP_OP_STRING || op->type == OP_OP_NUMBER ||
+ op->type == OP_OP_NUMBERS))
+ {
+ switch (op->one_char)
+ {
+ case N_COLOUR:
+ colour_option = "auto";
+ break;
+
+ case 'o':
+ only_matching_last = add_number(0, only_matching_last);
+ if (only_matching == NULL) only_matching = only_matching_last;
+ break;
+
+#ifdef JFRIEDL_DEBUG
+ case 'S':
+ S_arg = 0;
+ break;
+#endif
+ }
+ continue;
+ }
+
+ /* Otherwise, find the data string for the option. */
+
+ if (*option_data == 0)
+ {
+ if (i >= argc - 1 || longopwasequals)
+ {
+ fprintf(stderr, "pcre2grep: Data missing after %s\n", argv[i]);
+ pcre2grep_exit(usage(2));
+ }
+ option_data = argv[++i];
+ }
+
+ /* If the option type is OP_OP_NUMBERS, the value is a number that is to be
+ added to a chain of numbers. */
+
+ if (op->type == OP_OP_NUMBERS)
+ {
+ unsigned long int n = decode_number(option_data, op, longop);
+ omdatastr *omd = (omdatastr *)op->dataptr;
+ *(omd->lastptr) = add_number((int)n, *(omd->lastptr));
+ if (*(omd->anchor) == NULL) *(omd->anchor) = *(omd->lastptr);
+ }
+
+ /* If the option type is OP_PATLIST, it's the -e option, or one of the
+ include/exclude options, which can be called multiple times to create lists
+ of patterns. */
+
+ else if (op->type == OP_PATLIST)
+ {
+ patdatastr *pd = (patdatastr *)op->dataptr;
+ *(pd->lastptr) = add_pattern(option_data, (PCRE2_SIZE)strlen(option_data),
+ *(pd->lastptr));
+ if (*(pd->lastptr) == NULL) goto EXIT2;
+ if (*(pd->anchor) == NULL) *(pd->anchor) = *(pd->lastptr);
+ }
+
+ /* If the option type is OP_FILELIST, it's one of the options that names a
+ file. */
+
+ else if (op->type == OP_FILELIST)
+ {
+ fndatastr *fd = (fndatastr *)op->dataptr;
+ fn = (fnstr *)malloc(sizeof(fnstr));
+ if (fn == NULL)
+ {
+ fprintf(stderr, "pcre2grep: malloc failed\n");
+ goto EXIT2;
+ }
+ fn->next = NULL;
+ fn->name = option_data;
+ if (*(fd->anchor) == NULL)
+ *(fd->anchor) = fn;
+ else
+ (*(fd->lastptr))->next = fn;
+ *(fd->lastptr) = fn;
+ }
+
+ /* Handle OP_BINARY_FILES */
+
+ else if (op->type == OP_BINFILES)
+ {
+ if (strcmp(option_data, "binary") == 0)
+ binary_files = BIN_BINARY;
+ else if (strcmp(option_data, "without-match") == 0)
+ binary_files = BIN_NOMATCH;
+ else if (strcmp(option_data, "text") == 0)
+ binary_files = BIN_TEXT;
+ else
+ {
+ fprintf(stderr, "pcre2grep: unknown value \"%s\" for binary-files\n",
+ option_data);
+ pcre2grep_exit(usage(2));
+ }
+ }
+
+ /* Otherwise, deal with a single string or numeric data value. */
+
+ else if (op->type != OP_NUMBER && op->type != OP_U32NUMBER &&
+ op->type != OP_OP_NUMBER && op->type != OP_SIZE)
+ {
+ *((char **)op->dataptr) = option_data;
+ }
+ else
+ {
+ unsigned long int n = decode_number(option_data, op, longop);
+ if (op->type == OP_U32NUMBER) *((uint32_t *)op->dataptr) = n;
+ else if (op->type == OP_SIZE) *((PCRE2_SIZE *)op->dataptr) = n;
+ else *((int *)op->dataptr) = n;
+ }
+ }
+
+/* Options have been decoded. If -C was used, its value is used as a default
+for -A and -B. */
+
+if (both_context > 0)
+ {
+ if (after_context == 0) after_context = both_context;
+ if (before_context == 0) before_context = both_context;
+ }
+
+/* Only one of --only-matching, --output, --file-offsets, or --line-offsets is
+permitted. They display, each in their own way, only the data that has matched.
+*/
+
+only_matching_count = (only_matching != NULL) + (output_text != NULL) +
+ file_offsets + line_offsets;
+
+if (only_matching_count > 1)
+ {
+ fprintf(stderr, "pcre2grep: Cannot mix --only-matching, --output, "
+ "--file-offsets and/or --line-offsets\n");
+ pcre2grep_exit(usage(2));
+ }
+
+/* Check the text supplied to --output for errors. */
+
+if (output_text != NULL &&
+ !syntax_check_output_text((PCRE2_SPTR)output_text, FALSE))
+ goto EXIT2;
+
+/* Put limits into the match data block. */
+
+if (heap_limit != PCRE2_UNSET) pcre2_set_heap_limit(match_context, heap_limit);
+if (match_limit > 0) pcre2_set_match_limit(match_context, match_limit);
+if (depth_limit > 0) pcre2_set_depth_limit(match_context, depth_limit);
+
+/* If a locale has not been provided as an option, see if the LC_CTYPE or
+LC_ALL environment variable is set, and if so, use it. */
+
+if (locale == NULL)
+ {
+ locale = getenv("LC_ALL");
+ locale_from = "LC_ALL";
+ }
+
+if (locale == NULL)
+ {
+ locale = getenv("LC_CTYPE");
+ locale_from = "LC_CTYPE";
+ }
+
+/* If a locale is set, use it to generate the tables the PCRE needs. Passing
+NULL to pcre2_maketables() means that malloc() is used to get the memory. */
+
+if (locale != NULL)
+ {
+ if (setlocale(LC_CTYPE, locale) == NULL)
+ {
+ fprintf(stderr, "pcre2grep: Failed to set locale %s (obtained from %s)\n",
+ locale, locale_from);
+ goto EXIT2;
+ }
+ character_tables = pcre2_maketables(NULL);
+ pcre2_set_character_tables(compile_context, character_tables);
+ }
+
+/* Sort out colouring */
+
+if (colour_option != NULL && strcmp(colour_option, "never") != 0)
+ {
+ if (strcmp(colour_option, "always") == 0)
+#ifdef WIN32
+ do_ansi = !is_stdout_tty(),
+#endif
+ do_colour = TRUE;
+ else if (strcmp(colour_option, "auto") == 0) do_colour = is_stdout_tty();
+ else
+ {
+ fprintf(stderr, "pcre2grep: Unknown colour setting \"%s\"\n",
+ colour_option);
+ goto EXIT2;
+ }
+ if (do_colour)
+ {
+ char *cs = getenv("PCRE2GREP_COLOUR");
+ if (cs == NULL) cs = getenv("PCRE2GREP_COLOR");
+ if (cs == NULL) cs = getenv("PCREGREP_COLOUR");
+ if (cs == NULL) cs = getenv("PCREGREP_COLOR");
+ if (cs == NULL) cs = parse_grep_colors(getenv("GREP_COLORS"));
+ if (cs == NULL) cs = getenv("GREP_COLOR");
+ if (cs != NULL)
+ {
+ if (strspn(cs, ";0123456789") == strlen(cs)) colour_string = cs;
+ }
+#ifdef WIN32
+ init_colour_output();
+#endif
+ }
+ }
+
+/* Sort out a newline setting. */
+
+if (newline_arg != NULL)
+ {
+ for (endlinetype = 1; endlinetype < (int)(sizeof(newlines)/sizeof(char *));
+ endlinetype++)
+ {
+ if (strcmpic(newline_arg, newlines[endlinetype]) == 0) break;
+ }
+ if (endlinetype < (int)(sizeof(newlines)/sizeof(char *)))
+ pcre2_set_newline(compile_context, endlinetype);
+ else
+ {
+ fprintf(stderr, "pcre2grep: Invalid newline specifier \"%s\"\n",
+ newline_arg);
+ goto EXIT2;
+ }
+ }
+
+/* Find default newline convention */
+
+else
+ {
+ (void)pcre2_config(PCRE2_CONFIG_NEWLINE, &endlinetype);
+ }
+
+/* Interpret the text values for -d and -D */
+
+if (dee_option != NULL)
+ {
+ if (strcmp(dee_option, "read") == 0) dee_action = dee_READ;
+ else if (strcmp(dee_option, "recurse") == 0) dee_action = dee_RECURSE;
+ else if (strcmp(dee_option, "skip") == 0) dee_action = dee_SKIP;
+ else
+ {
+ fprintf(stderr, "pcre2grep: Invalid value \"%s\" for -d\n", dee_option);
+ goto EXIT2;
+ }
+ }
+
+if (DEE_option != NULL)
+ {
+ if (strcmp(DEE_option, "read") == 0) DEE_action = DEE_READ;
+ else if (strcmp(DEE_option, "skip") == 0) DEE_action = DEE_SKIP;
+ else
+ {
+ fprintf(stderr, "pcre2grep: Invalid value \"%s\" for -D\n", DEE_option);
+ goto EXIT2;
+ }
+ }
+
+/* Set the extra options */
+
+(void)pcre2_set_compile_extra_options(compile_context, extra_options);
+
+/* Check the values for Jeffrey Friedl's debugging options. */
+
+#ifdef JFRIEDL_DEBUG
+if (S_arg > 9)
+ {
+ fprintf(stderr, "pcre2grep: bad value for -S option\n");
+ return 2;
+ }
+if (jfriedl_XT != 0 || jfriedl_XR != 0)
+ {
+ if (jfriedl_XT == 0) jfriedl_XT = 1;
+ if (jfriedl_XR == 0) jfriedl_XR = 1;
+ }
+#endif
+
+/* If use_jit is set, check whether JIT is available. If not, do not try
+to use JIT. */
+
+if (use_jit)
+ {
+ uint32_t answer;
+ (void)pcre2_config(PCRE2_CONFIG_JIT, &answer);
+ if (!answer) use_jit = FALSE;
+ }
+
+/* Get memory for the main buffer. */
+
+if (bufthird <= 0)
+ {
+ fprintf(stderr, "pcre2grep: --buffer-size must be greater than zero\n");
+ goto EXIT2;
+ }
+
+bufsize = 3*bufthird;
+main_buffer = (char *)malloc(bufsize);
+
+if (main_buffer == NULL)
+ {
+ fprintf(stderr, "pcre2grep: malloc failed\n");
+ goto EXIT2;
+ }
+
+/* If no patterns were provided by -e, and there are no files provided by -f,
+the first argument is the one and only pattern, and it must exist. */
+
+if (patterns == NULL && pattern_files == NULL)
+ {
+ if (i >= argc) return usage(2);
+ patterns = patterns_last = add_pattern(argv[i], (PCRE2_SIZE)strlen(argv[i]),
+ NULL);
+ i++;
+ if (patterns == NULL) goto EXIT2;
+ }
+
+/* Compile the patterns that were provided on the command line, either by
+multiple uses of -e or as a single unkeyed pattern. We cannot do this until
+after all the command-line options are read so that we know which PCRE options
+to use. When -F is used, compile_pattern() may add another block into the
+chain, so we must not access the next pointer till after the compile. */
+
+for (j = 1, cp = patterns; cp != NULL; j++, cp = cp->next)
+ {
+ if (!compile_pattern(cp, pcre2_options, FALSE, "command-line",
+ (j == 1 && patterns->next == NULL)? 0 : j))
+ goto EXIT2;
+ }
+
+/* Read and compile the regular expressions that are provided in files. */
+
+for (fn = pattern_files; fn != NULL; fn = fn->next)
+ {
+ if (!read_pattern_file(fn->name, &patterns, &patterns_last)) goto EXIT2;
+ }
+
+/* Unless JIT has been explicitly disabled, arrange a stack for it to use. */
+
+#ifdef SUPPORT_PCRE2GREP_JIT
+if (use_jit)
+ {
+ jit_stack = pcre2_jit_stack_create(32*1024, 1024*1024, NULL);
+ if (jit_stack != NULL )
+ pcre2_jit_stack_assign(match_context, NULL, jit_stack);
+ }
+#endif
+
+/* -F, -w, and -x do not apply to include or exclude patterns, so we must
+adjust the options. */
+
+pcre2_options &= ~PCRE2_LITERAL;
+(void)pcre2_set_compile_extra_options(compile_context, 0);
+
+/* If there are include or exclude patterns read from the command line, compile
+them. */
+
+for (j = 0; j < 4; j++)
+ {
+ int k;
+ for (k = 1, cp = *(incexlist[j]); cp != NULL; k++, cp = cp->next)
+ {
+ if (!compile_pattern(cp, pcre2_options, FALSE, incexname[j],
+ (k == 1 && cp->next == NULL)? 0 : k))
+ goto EXIT2;
+ }
+ }
+
+/* Read and compile include/exclude patterns from files. */
+
+for (fn = include_from; fn != NULL; fn = fn->next)
+ {
+ if (!read_pattern_file(fn->name, &include_patterns, &include_patterns_last))
+ goto EXIT2;
+ }
+
+for (fn = exclude_from; fn != NULL; fn = fn->next)
+ {
+ if (!read_pattern_file(fn->name, &exclude_patterns, &exclude_patterns_last))
+ goto EXIT2;
+ }
+
+/* If there are no files that contain lists of files to search, and there are
+no file arguments, search stdin, and then exit. */
+
+if (file_lists == NULL && i >= argc)
+ {
+ rc = pcre2grep(stdin, FR_PLAIN, stdin_name,
+ (filenames > FN_DEFAULT)? stdin_name : NULL);
+ goto EXIT;
+ }
+
+/* If any files that contains a list of files to search have been specified,
+read them line by line and search the given files. */
+
+for (fn = file_lists; fn != NULL; fn = fn->next)
+ {
+ char buffer[FNBUFSIZ];
+ FILE *fl;
+ if (strcmp(fn->name, "-") == 0) fl = stdin; else
+ {
+ fl = fopen(fn->name, "rb");
+ if (fl == NULL)
+ {
+ fprintf(stderr, "pcre2grep: Failed to open %s: %s\n", fn->name,
+ strerror(errno));
+ goto EXIT2;
+ }
+ }
+ while (fgets(buffer, sizeof(buffer), fl) != NULL)
+ {
+ int frc;
+ char *end = buffer + (int)strlen(buffer);
+ while (end > buffer && isspace(end[-1])) end--;
+ *end = 0;
+ if (*buffer != 0)
+ {
+ frc = grep_or_recurse(buffer, dee_action == dee_RECURSE, FALSE);
+ if (frc > 1) rc = frc;
+ else if (frc == 0 && rc == 1) rc = 0;
+ }
+ }
+ if (fl != stdin) fclose(fl);
+ }
+
+/* After handling file-list, work through remaining arguments. Pass in the fact
+that there is only one argument at top level - this suppresses the file name if
+the argument is not a directory and filenames are not otherwise forced. */
+
+only_one_at_top = i == argc - 1 && file_lists == NULL;
+
+for (; i < argc; i++)
+ {
+ int frc = grep_or_recurse(argv[i], dee_action == dee_RECURSE,
+ only_one_at_top);
+ if (frc > 1) rc = frc;
+ else if (frc == 0 && rc == 1) rc = 0;
+ }
+
+#ifdef SUPPORT_PCRE2GREP_CALLOUT
+/* If separating builtin echo callouts by implicit newline, add one more for
+the final item. */
+
+if (om_separator != NULL && strcmp(om_separator, STDOUT_NL) == 0)
+ fprintf(stdout, STDOUT_NL);
+#endif
+
+/* Show the total number of matches if requested, but not if only one file's
+count was printed. */
+
+if (show_total_count && counts_printed != 1 && filenames != FN_NOMATCH_ONLY)
+ {
+ if (counts_printed != 0 && filenames >= FN_DEFAULT)
+ fprintf(stdout, "TOTAL:");
+ fprintf(stdout, "%lu" STDOUT_NL, total_count);
+ }
+
+EXIT:
+#ifdef SUPPORT_PCRE2GREP_JIT
+if (jit_stack != NULL) pcre2_jit_stack_free(jit_stack);
+#endif
+
+free(main_buffer);
+free((void *)character_tables);
+
+pcre2_compile_context_free(compile_context);
+pcre2_match_context_free(match_context);
+pcre2_match_data_free(match_data);
+
+free_pattern_chain(patterns);
+free_pattern_chain(include_patterns);
+free_pattern_chain(include_dir_patterns);
+free_pattern_chain(exclude_patterns);
+free_pattern_chain(exclude_dir_patterns);
+
+free_file_chain(exclude_from);
+free_file_chain(include_from);
+free_file_chain(pattern_files);
+free_file_chain(file_lists);
+
+while (only_matching != NULL)
+ {
+ omstr *this = only_matching;
+ only_matching = this->next;
+ free(this);
+ }
+
+pcre2grep_exit(rc);
+
+EXIT2:
+rc = 2;
+goto EXIT;
+}
+
+/* End of pcre2grep */
projects / ossec-hids.git / blobdiff