X-Git-Url: http://ftp.carnet.hr/carnet-debian/scm?p=ossec-hids.git;a=blobdiff_plain;f=src%2Fexternal%2Fpcre2-10.32%2Fsrc%2Fconfig.h.generic;fp=src%2Fexternal%2Fpcre2-10.32%2Fsrc%2Fconfig.h.generic;h=89a52ef8485122cdec5c885934d7cdb8794c695e;hp=0000000000000000000000000000000000000000;hb=3f728675941dc69d4e544d3a880a56240a6e394a;hpb=927951d1c1ad45ba9e7325f07d996154a91c911b diff --git a/src/external/pcre2-10.32/src/config.h.generic b/src/external/pcre2-10.32/src/config.h.generic new file mode 100644 index 0000000..89a52ef --- /dev/null +++ b/src/external/pcre2-10.32/src/config.h.generic @@ -0,0 +1,366 @@ +/* src/config.h. Generated from config.h.in by configure. */ +/* src/config.h.in. Generated from configure.ac by autoheader. */ + +/* PCRE2 is written in Standard C, but there are a few non-standard things it +can cope with, allowing it to run on SunOS4 and other "close to standard" +systems. + +In environments that support the GNU autotools, config.h.in is converted into +config.h by the "configure" script. In environments that use CMake, +config-cmake.in is converted into config.h. If you are going to build PCRE2 "by +hand" without using "configure" or CMake, you should copy the distributed +config.h.generic to config.h, and edit the macro definitions to be the way you +need them. You must then add -DHAVE_CONFIG_H to all of your compile commands, +so that config.h is included at the start of every source. + +Alternatively, you can avoid editing by using -D on the compiler command line +to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H, +but if you do, default values will be taken from config.h for non-boolean +macros that are not defined on the command line. + +Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be +defined (conventionally to 1) for TRUE, and not defined at all for FALSE. All +such macros are listed as a commented #undef in config.h.generic. Macros such +as MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are +surrounded by #ifndef/#endif lines so that the value can be overridden by -D. + +PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if +HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make +sure both macros are undefined; an emulation function will then be used. */ + +/* By default, the \R escape sequence matches any Unicode line ending + character or sequence of characters. If BSR_ANYCRLF is defined (to any + value), this is changed so that backslash-R matches only CR, LF, or CRLF. + The build-time default can be overridden by the user of PCRE2 at runtime. + */ +/* #undef BSR_ANYCRLF */ + +/* If you are compiling for a system that uses EBCDIC instead of ASCII + character codes, define this macro to any value. When EBCDIC is set, PCRE2 + assumes that all input strings are in EBCDIC. If you do not define this + macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It + is not possible to build a version of PCRE2 that supports both EBCDIC and + UTF-8/16/32. */ +/* #undef EBCDIC */ + +/* In an EBCDIC environment, define this macro to any value to arrange for the + NL character to be 0x25 instead of the default 0x15. NL plays the role that + LF does in an ASCII/Unicode environment. */ +/* #undef EBCDIC_NL25 */ + +/* Define to 1 if you have the `bcopy' function. */ +/* #undef HAVE_BCOPY */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_BZLIB_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_DIRENT_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_DLFCN_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_EDITLINE_READLINE_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_EDIT_READLINE_READLINE_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_INTTYPES_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_LIMITS_H */ + +/* Define to 1 if you have the `memmove' function. */ +/* #undef HAVE_MEMMOVE */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_MEMORY_H */ + +/* Define to 1 if you have the `mkostemp' function. */ +/* #undef HAVE_MKOSTEMP */ + +/* Define if you have POSIX threads libraries and header files. */ +/* #undef HAVE_PTHREAD */ + +/* Have PTHREAD_PRIO_INHERIT. */ +/* #undef HAVE_PTHREAD_PRIO_INHERIT */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_READLINE_HISTORY_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_READLINE_READLINE_H */ + +/* Define to 1 if you have the `secure_getenv' function. */ +/* #undef HAVE_SECURE_GETENV */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_STDINT_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_STDLIB_H */ + +/* Define to 1 if you have the `strerror' function. */ +/* #undef HAVE_STRERROR */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_STRINGS_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_STRING_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_SYS_STAT_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_SYS_TYPES_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_SYS_WAIT_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_UNISTD_H */ + +/* Define to 1 if the compiler supports simple visibility declarations. */ +/* #undef HAVE_VISIBILITY */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_WINDOWS_H */ + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_ZLIB_H */ + +/* This limits the amount of memory that may be used while matching a pattern. + It applies to both pcre2_match() and pcre2_dfa_match(). It does not apply + to JIT matching. The value is in kibibytes (units of 1024 bytes). */ +#ifndef HEAP_LIMIT +#define HEAP_LIMIT 20000000 +#endif + +/* The value of LINK_SIZE determines the number of bytes used to store links + as offsets within the compiled regex. The default is 2, which allows for + compiled patterns up to 65535 code units long. This covers the vast + majority of cases. However, PCRE2 can also be compiled to use 3 or 4 bytes + instead. This allows for longer patterns in extreme cases. */ +#ifndef LINK_SIZE +#define LINK_SIZE 2 +#endif + +/* Define to the sub-directory where libtool stores uninstalled libraries. */ +/* This is ignored unless you are using libtool. */ +#ifndef LT_OBJDIR +#define LT_OBJDIR ".libs/" +#endif + +/* The value of MATCH_LIMIT determines the default number of times the + pcre2_match() function can record a backtrack position during a single + matching attempt. The value is also used to limit a loop counter in + pcre2_dfa_match(). There is a runtime interface for setting a different + limit. The limit exists in order to catch runaway regular expressions that + take for ever to determine that they do not match. The default is set very + large so that it does not accidentally catch legitimate cases. */ +#ifndef MATCH_LIMIT +#define MATCH_LIMIT 10000000 +#endif + +/* The above limit applies to all backtracks, whether or not they are nested. + In some environments it is desirable to limit the nesting of backtracking + (that is, the depth of tree that is searched) more strictly, in order to + restrict the maximum amount of heap memory that is used. The value of + MATCH_LIMIT_DEPTH provides this facility. To have any useful effect, it + must be less than the value of MATCH_LIMIT. The default is to use the same + value as MATCH_LIMIT. There is a runtime method for setting a different + limit. In the case of pcre2_dfa_match(), this limit controls the depth of + the internal nested function calls that are used for pattern recursions, + lookarounds, and atomic groups. */ +#ifndef MATCH_LIMIT_DEPTH +#define MATCH_LIMIT_DEPTH MATCH_LIMIT +#endif + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#ifndef MAX_NAME_COUNT +#define MAX_NAME_COUNT 10000 +#endif + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#ifndef MAX_NAME_SIZE +#define MAX_NAME_SIZE 32 +#endif + +/* Defining NEVER_BACKSLASH_C locks out the use of \C in all patterns. */ +/* #undef NEVER_BACKSLASH_C */ + +/* The value of NEWLINE_DEFAULT determines the default newline character + sequence. PCRE2 client programs can override this by selecting other values + at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), 5 + (ANYCRLF), and 6 (NUL). */ +#ifndef NEWLINE_DEFAULT +#define NEWLINE_DEFAULT 2 +#endif + +/* Name of package */ +#define PACKAGE "pcre2" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "PCRE2" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "PCRE2 10.32" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "pcre2" + +/* Define to the home page for this package. */ +#define PACKAGE_URL "" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "10.32" + +/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested + parentheses (of any kind) in a pattern. This limits the amount of system + stack that is used while compiling a pattern. */ +#ifndef PARENS_NEST_LIMIT +#define PARENS_NEST_LIMIT 250 +#endif + +/* The value of PCRE2GREP_BUFSIZE is the starting size of the buffer used by + pcre2grep to hold parts of the file it is searching. The buffer will be + expanded up to PCRE2GREP_MAX_BUFSIZE if necessary, for files containing + very long lines. The actual amount of memory used by pcre2grep is three + times this number, because it allows for the buffering of "before" and + "after" lines. */ +#ifndef PCRE2GREP_BUFSIZE +#define PCRE2GREP_BUFSIZE 20480 +#endif + +/* The value of PCRE2GREP_MAX_BUFSIZE specifies the maximum size of the buffer + used by pcre2grep to hold parts of the file it is searching. The actual + amount of memory used by pcre2grep is three times this number, because it + allows for the buffering of "before" and "after" lines. */ +#ifndef PCRE2GREP_MAX_BUFSIZE +#define PCRE2GREP_MAX_BUFSIZE 1048576 +#endif + +/* Define to any value to include debugging code. */ +/* #undef PCRE2_DEBUG */ + +/* If you are compiling for a system other than a Unix-like system or + Win32, and it needs some magic to be inserted before the definition + of a function that is exported by the library, define this macro to + contain the relevant magic. If you do not define this macro, a suitable + __declspec value is used for Windows systems; in other environments + "extern" is used for a C compiler and "extern C" for a C++ compiler. + This macro apears at the start of every exported function that is part + of the external API. It does not appear on functions that are "external" + in the C sense, but which are internal to the library. */ +/* #undef PCRE2_EXP_DEFN */ + +/* Define to any value if linking statically (TODO: make nice with Libtool) */ +/* #undef PCRE2_STATIC */ + +/* Define to necessary symbol if this constant uses a non-standard name on + your system. */ +/* #undef PTHREAD_CREATE_JOINABLE */ + +/* Define to any non-zero number to enable support for SELinux compatible + executable memory allocator in JIT. Note that this will have no effect + unless SUPPORT_JIT is also defined. */ +/* #undef SLJIT_PROT_EXECUTABLE_ALLOCATOR */ + +/* Define to 1 if you have the ANSI C header files. */ +/* #undef STDC_HEADERS */ + +/* Define to any value to enable support for Just-In-Time compiling. */ +/* #undef SUPPORT_JIT */ + +/* Define to any value to allow pcre2grep to be linked with libbz2, so that it + is able to handle .bz2 files. */ +/* #undef SUPPORT_LIBBZ2 */ + +/* Define to any value to allow pcre2test to be linked with libedit. */ +/* #undef SUPPORT_LIBEDIT */ + +/* Define to any value to allow pcre2test to be linked with libreadline. */ +/* #undef SUPPORT_LIBREADLINE */ + +/* Define to any value to allow pcre2grep to be linked with libz, so that it + is able to handle .gz files. */ +/* #undef SUPPORT_LIBZ */ + +/* Define to any value to enable callout script support in pcre2grep. */ +/* #undef SUPPORT_PCRE2GREP_CALLOUT */ + +/* Define to any value to enable JIT support in pcre2grep. Note that this will + have no effect unless SUPPORT_JIT is also defined. */ +/* #undef SUPPORT_PCRE2GREP_JIT */ + +/* Define to any value to enable the 16 bit PCRE2 library. */ +/* #undef SUPPORT_PCRE2_16 */ + +/* Define to any value to enable the 32 bit PCRE2 library. */ +/* #undef SUPPORT_PCRE2_32 */ + +/* Define to any value to enable the 8 bit PCRE2 library. */ +/* #undef SUPPORT_PCRE2_8 */ + +/* Define to any value to enable support for Unicode and UTF encoding. This + will work even in an EBCDIC environment, but it is incompatible with the + EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or* + ASCII/Unicode, but not both at once. */ +/* #undef SUPPORT_UNICODE */ + +/* Define to any value for valgrind support to find invalid memory reads. */ +/* #undef SUPPORT_VALGRIND */ + +/* Enable extensions on AIX 3, Interix. */ +#ifndef _ALL_SOURCE +# define _ALL_SOURCE 1 +#endif +/* Enable GNU extensions on systems that have them. */ +#ifndef _GNU_SOURCE +# define _GNU_SOURCE 1 +#endif +/* Enable threading extensions on Solaris. */ +#ifndef _POSIX_PTHREAD_SEMANTICS +# define _POSIX_PTHREAD_SEMANTICS 1 +#endif +/* Enable extensions on HP NonStop. */ +#ifndef _TANDEM_SOURCE +# define _TANDEM_SOURCE 1 +#endif +/* Enable general extensions on Solaris. */ +#ifndef __EXTENSIONS__ +# define __EXTENSIONS__ 1 +#endif + +/* Version number of package */ +#define VERSION "10.32" + +/* Define to 1 if on MINIX. */ +/* #undef _MINIX */ + +/* Define to 2 if the system does not provide POSIX.1 features except with + this defined. */ +/* #undef _POSIX_1_SOURCE */ + +/* Define to 1 if you need to in order for `stat' and other things to work. */ +/* #undef _POSIX_SOURCE */ + +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ + +/* Define to the type of a signed integer type of width exactly 64 bits if + such a type exists and the standard includes do not define it. */ +/* #undef int64_t */ + +/* Define to `unsigned int' if does not define. */ +/* #undef size_t */