X-Git-Url: http://ftp.carnet.hr/carnet-debian/scm?p=ossec-hids.git;a=blobdiff_plain;f=src%2Fexternal%2Fzlib-1.2.8%2Fconfigure;fp=src%2Fexternal%2Fzlib-1.2.8%2Fconfigure;h=b77a8a8cf95f75e9adc79b62a8b95d201dca21de;hp=0000000000000000000000000000000000000000;hb=789cbc8e52da68eba3517b920ef22e000cf3c9fd;hpb=ef70704f0b31b59bb719b884d6a99cb9e3e2044a

diff --git a/src/external/zlib-1.2.8/configure b/src/external/zlib-1.2.8/configure
new file mode 100755
index 0000000..b77a8a8
--- /dev/null
+++ b/src/external/zlib-1.2.8/configure
@@ -0,0 +1,831 @@
+#!/bin/sh
+# configure script for zlib.
+#
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
+#
+# To impose specific compiler or flags or install directory, use for example:
+#    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
+# or for csh/tcsh users:
+#    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
+
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
+# start off configure.log
+echo -------------------- >> configure.log
+echo $0 $* >> configure.log
+date >> configure.log
+
+# set command prefix for cross-compilation
+if [ -n "${CHOST}" ]; then
+    uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
+    CROSS_PREFIX="${CHOST}-"
+fi
+
+# destination name for static library
+STATICLIB=libz.a
+
+# extract zlib version numbers from zlib.h
+VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
+VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
+VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
+
+# establish commands for library building
+if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    AR=${AR-"${CROSS_PREFIX}ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
+else
+    AR=${AR-"ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
+fi
+ARFLAGS=${ARFLAGS-"rc"}
+if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log
+else
+    RANLIB=${RANLIB-"ranlib"}
+fi
+if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    NM=${NM-"${CROSS_PREFIX}nm"}
+    test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log
+else
+    NM=${NM-"nm"}
+fi
+
+# set defaults before processing command line options
+LDCONFIG=${LDCONFIG-"ldconfig"}
+LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
+ARCHS=
+prefix=${prefix-/usr/local}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+sharedlibdir=${sharedlibdir-'${libdir}'}
+includedir=${includedir-'${prefix}/include'}
+mandir=${mandir-'${prefix}/share/man'}
+shared_ext='.so'
+shared=1
+solo=0
+cover=0
+zprefix=0
+zconst=0
+build64=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+OBJC='$(OBJZ) $(OBJG)'
+PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)'
+
+# leave this script, optionally in a bad way
+leave()
+{
+  if test "$*" != "0"; then
+    echo "** $0 aborting." | tee -a configure.log
+  fi
+  rm -f $test.[co] $test $test$shared_ext $test.gcno ./--version
+  echo -------------------- >> configure.log
+  echo >> configure.log
+  echo >> configure.log
+  exit $1
+}
+
+# process command line options
+while test $# -ge 1
+do
+case "$1" in
+    -h* | --help)
+      echo 'usage:' | tee -a configure.log
+      echo '  configure [--const] [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]' | tee -a configure.log
+      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log
+      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log
+        exit 0 ;;
+    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
+    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
+    --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
+    -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
+    -p* | --prefix) prefix="$2"; shift; shift ;;
+    -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
+    -l* | --libdir) libdir="$2"; shift; shift ;;
+    -i* | --includedir) includedir="$2"; shift; shift ;;
+    -s* | --shared | --enable-shared) shared=1; shift ;;
+    -t | --static) shared=0; shift ;;
+    --solo) solo=1; shift ;;
+    --cover) cover=1; shift ;;
+    -z* | --zprefix) zprefix=1; shift ;;
+    -6* | --64) build64=1; shift ;;
+    -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
+    --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;;
+    --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;;
+    -c* | --const) zconst=1; shift ;;
+    *)
+      echo "unknown option: $1" | tee -a configure.log
+      echo "$0 --help for help" | tee -a configure.log
+      leave 1;;
+    esac
+done
+
+# temporary file name
+test=ztest$$
+
+# put arguments in log, also put test file in log if used in arguments
+show()
+{
+  case "$*" in
+    *$test.c*)
+      echo === $test.c === >> configure.log
+      cat $test.c >> configure.log
+      echo === >> configure.log;;
+  esac
+  echo $* >> configure.log
+}
+
+# check for gcc vs. cc and set compile and link flags based on the system identified by uname
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
+cc=${CC-${CROSS_PREFIX}gcc}
+cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
+case "$cc" in
+  *gcc*) gcc=1 ;;
+  *clang*) gcc=1 ;;
+esac
+case `$cc -v 2>&1` in
+  *gcc*) gcc=1 ;;
+esac
+
+show $cc -c $test.c
+if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
+  echo ... using gcc >> configure.log
+  CC="$cc"
+  CFLAGS="${CFLAGS--O3} ${ARCHS}"
+  SFLAGS="${CFLAGS--O3} -fPIC"
+  LDFLAGS="${LDFLAGS} ${ARCHS}"
+  if test $build64 -eq 1; then
+    CFLAGS="${CFLAGS} -m64"
+    SFLAGS="${SFLAGS} -m64"
+  fi
+  if test "${ZLIBGCCWARN}" = "YES"; then
+    if test "$zconst" -eq 1; then
+      CFLAGS="${CFLAGS} -Wall -Wextra -Wcast-qual -pedantic -DZLIB_CONST"
+    else
+      CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
+    fi
+  fi
+  if test -z "$uname"; then
+    uname=`(uname -s || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
+  Linux* | linux* | GNU | GNU/* | solaris*)
+        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  *BSD | *bsd* | DragonFly)
+        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"}
+        LDCONFIG="ldconfig -m" ;;
+  CYGWIN* | Cygwin* | cygwin* | OS/2*)
+        EXE='.exe' ;;
+  MINGW* | mingw*)
+# temporary bypass
+        rm -f $test.[co] $test $test$shared_ext
+        echo "Please use win32/Makefile.gcc instead." | tee -a configure.log
+        leave 1
+        LDSHARED=${LDSHARED-"$cc -shared"}
+        LDSHAREDLIBC=""
+        EXE='.exe' ;;
+  QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
+         # (alain.bonnefoy@icbt.com)
+                 LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
+  HP-UX*)
+         LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+                 shared_ext='.so'
+                 SHAREDLIB='libz.so' ;;
+         *)
+                 shared_ext='.sl'
+                 SHAREDLIB='libz.sl' ;;
+         esac ;;
+  Darwin* | darwin*)
+             shared_ext='.dylib'
+             SHAREDLIB=libz$shared_ext
+             SHAREDLIBV=libz.$VER$shared_ext
+             SHAREDLIBM=libz.$VER1$shared_ext
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
+             if libtool -V 2>&1 | grep Apple > /dev/null; then
+                 AR="libtool"
+             else
+                 AR="/usr/bin/libtool"
+             fi
+             ARFLAGS="-o" ;;
+  *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
+  esac
+else
+  # find system name and corresponding cc options
+  CC=${CC-cc}
+  gcc=0
+  echo ... using $CC >> configure.log
+  if test -z "$uname"; then
+    uname=`(uname -sr || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
+  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
+             CFLAGS=${CFLAGS-"-O"}
+#            LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+             LDSHARED=${LDSHARED-"ld -b"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+             shared_ext='.so'
+             SHAREDLIB='libz.so' ;;
+         *)
+             shared_ext='.sl'
+             SHAREDLIB='libz.sl' ;;
+         esac ;;
+  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
+             CFLAGS=${CFLAGS-"-ansi -O2"}
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
+  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+             CFLAGS=${CFLAGS-"-O -std1"}
+             LDFLAGS="${LDFLAGS} -Wl,-rpath,."
+             LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;;
+  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
+             CFLAGS=${CFLAGS-"-O -std1"}
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
+  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
+             CFLAGS=${CFLAGS-"-4 -O"}
+             LDSHARED=${LDSHARED-"cc"}
+             RANLIB=${RANLIB-"true"}
+             AR="cc"
+             ARFLAGS="-A" ;;
+  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
+             CFLAGS=${CFLAGS-"-O3"}
+             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
+  SunOS\ 5* | solaris*)
+         LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"}
+         SFLAGS=${CFLAGS-"-fast -KPIC"}
+         CFLAGS=${CFLAGS-"-fast"}
+         if test $build64 -eq 1; then
+             # old versions of SunPRO/Workshop/Studio don't support -m64,
+             # but newer ones do.  Check for it.
+             flag64=`$CC -flags | egrep -- '^-m64'`
+             if test x"$flag64" != x"" ; then
+                 CFLAGS="${CFLAGS} -m64"
+                 SFLAGS="${SFLAGS} -m64"
+             else
+                 case `(uname -m || echo unknown) 2>/dev/null` in
+                   i86*)
+                     SFLAGS="$SFLAGS -xarch=amd64"
+                     CFLAGS="$CFLAGS -xarch=amd64" ;;
+                   *)
+                     SFLAGS="$SFLAGS -xarch=v9"
+                     CFLAGS="$CFLAGS -xarch=v9" ;;
+                 esac
+             fi
+         fi
+         ;;
+  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
+             CFLAGS=${CFLAGS-"-O2"}
+             LDSHARED=${LDSHARED-"ld"} ;;
+  SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+             CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"}
+             LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;;
+  UNIX_System_V\ 4.2.0)
+             SFLAGS=${CFLAGS-"-KPIC -O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -G"} ;;
+  UNIX_SV\ 4.2MP)
+             SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -G"} ;;
+  OpenUNIX\ 5)
+             SFLAGS=${CFLAGS-"-KPIC -O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -G"} ;;
+  AIX*)  # Courtesy of dbakker@arrayasolutions.com
+             SFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+             CFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+             LDSHARED=${LDSHARED-"xlc -G"} ;;
+  # send working options for other systems to zlib@gzip.org
+  *)         SFLAGS=${CFLAGS-"-O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -shared"} ;;
+  esac
+fi
+
+# destination names for shared library if not defined above
+SHAREDLIB=${SHAREDLIB-"libz$shared_ext"}
+SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"}
+SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
+
+echo >> configure.log
+
+# define functions for testing compiler and library characteristics and logging the results
+
+cat > $test.c <<EOF
+#error error
+EOF
+if ($CC -c $CFLAGS $test.c) 2>/dev/null; then
+  try()
+  {
+    show $*
+    test "`( $* ) 2>&1 | tee -a configure.log`" = ""
+  }
+  echo - using any output from compiler to indicate an error >> configure.log
+else
+try()
+{
+  show $*
+  ( $* ) >> configure.log 2>&1
+  ret=$?
+  if test $ret -ne 0; then
+    echo "(exit code "$ret")" >> configure.log
+  fi
+  return $ret
+}
+fi
+
+tryboth()
+{
+  show $*
+  got=`( $* ) 2>&1`
+  ret=$?
+  printf %s "$got" >> configure.log
+  if test $ret -ne 0; then
+    return $ret
+  fi
+  test "$got" = ""
+}
+
+cat > $test.c << EOF
+int foo() { return 0; }
+EOF
+echo "Checking for obsessive-compulsive compiler options..." >> configure.log
+if try $CC -c $CFLAGS $test.c; then
+  :
+else
+  echo "Compiler error reporting is too harsh for $0 (perhaps remove -Werror)." | tee -a configure.log
+  leave 1
+fi
+
+echo >> configure.log
+
+# see if shared library build supported
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+if test $shared -eq 1; then
+  echo Checking for shared library support... | tee -a configure.log
+  # we must test in two steps (cc then ld), required at least on SunOS 4.x
+  if try $CC -w -c $SFLAGS $test.c &&
+     try $LDSHARED $SFLAGS -o $test$shared_ext $test.o; then
+    echo Building shared library $SHAREDLIBV with $CC. | tee -a configure.log
+  elif test -z "$old_cc" -a -z "$old_cflags"; then
+    echo No shared library support. | tee -a configure.log
+    shared=0;
+  else
+    echo 'No shared library support; try without defining CC and CFLAGS' | tee -a configure.log
+    shared=0;
+  fi
+fi
+if test $shared -eq 0; then
+  LDSHARED="$CC"
+  ALL="static"
+  TEST="all teststatic"
+  SHAREDLIB=""
+  SHAREDLIBV=""
+  SHAREDLIBM=""
+  echo Building static library $STATICLIB version $VER with $CC. | tee -a configure.log
+else
+  ALL="static shared"
+  TEST="all teststatic testshared"
+fi
+
+# check for underscores in external names for use by assembler code
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+  *ASMV*)
+    echo >> configure.log
+    show "$NM $test.o | grep _hello"
+    if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then
+      CPP="$CPP -DNO_UNDERLINE"
+      echo Checking for underline in external names... No. | tee -a configure.log
+    else
+      echo Checking for underline in external names... Yes. | tee -a configure.log
+    fi ;;
+esac
+
+echo >> configure.log
+
+# check for large file support, and if none, check for fseeko()
+cat > $test.c <<EOF
+#include <sys/types.h>
+off64_t dummy = 0;
+EOF
+if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then
+  CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1"
+  SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1"
+  ALL="${ALL} all64"
+  TEST="${TEST} test64"
+  echo "Checking for off64_t... Yes." | tee -a configure.log
+  echo "Checking for fseeko... Yes." | tee -a configure.log
+else
+  echo "Checking for off64_t... No." | tee -a configure.log
+  echo >> configure.log
+  cat > $test.c <<EOF
+#include <stdio.h>
+int main(void) {
+  fseeko(NULL, 0, 0);
+  return 0;
+}
+EOF
+  if try $CC $CFLAGS -o $test $test.c; then
+    echo "Checking for fseeko... Yes." | tee -a configure.log
+  else
+    CFLAGS="${CFLAGS} -DNO_FSEEKO"
+    SFLAGS="${SFLAGS} -DNO_FSEEKO"
+    echo "Checking for fseeko... No." | tee -a configure.log
+  fi
+fi
+
+echo >> configure.log
+
+# check for strerror() for use by gz* functions
+cat > $test.c <<EOF
+#include <string.h>
+#include <errno.h>
+int main() { return strlen(strerror(errno)); }
+EOF
+if try $CC $CFLAGS -o $test $test.c; then
+  echo "Checking for strerror... Yes." | tee -a configure.log
+else
+  CFLAGS="${CFLAGS} -DNO_STRERROR"
+  SFLAGS="${SFLAGS} -DNO_STRERROR"
+  echo "Checking for strerror... No." | tee -a configure.log
+fi
+
+# copy clean zconf.h for subsequent edits
+cp -p zconf.h.in zconf.h
+
+echo >> configure.log
+
+# check for unistd.h and save result in zconf.h
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if try $CC -c $CFLAGS $test.c; then
+  sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Checking for unistd.h... Yes." | tee -a configure.log
+else
+  echo "Checking for unistd.h... No." | tee -a configure.log
+fi
+
+echo >> configure.log
+
+# check for stdarg.h and save result in zconf.h
+cat > $test.c <<EOF
+#include <stdarg.h>
+int main() { return 0; }
+EOF
+if try $CC -c $CFLAGS $test.c; then
+  sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Checking for stdarg.h... Yes." | tee -a configure.log
+else
+  echo "Checking for stdarg.h... No." | tee -a configure.log
+fi
+
+# if the z_ prefix was requested, save that in zconf.h
+if test $zprefix -eq 1; then
+  sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo >> configure.log
+  echo "Using z_ prefix on all symbols." | tee -a configure.log
+fi
+
+# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists
+if test $solo -eq 1; then
+  sed '/#define ZCONF_H/a\
+#define Z_SOLO
+
+' < zconf.h > zconf.temp.h
+  mv zconf.temp.h zconf.h
+OBJC='$(OBJZ)'
+PIC_OBJC='$(PIC_OBJZ)'
+fi
+
+# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X
+if test $cover -eq 1; then
+  CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage"
+  if test -n "$GCC_CLASSIC"; then
+    CC=$GCC_CLASSIC
+  fi
+fi
+
+echo >> configure.log
+
+# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions
+# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a
+# return value.  The most secure result is vsnprintf() with a return value.  snprintf() with a
+# return value is secure as well, but then gzprintf() will be limited to 20 arguments.
+cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+#include "zconf.h"
+int main()
+{
+#ifndef STDC
+  choke me
+#endif
+  return 0;
+}
+EOF
+if try $CC -c $CFLAGS $test.c; then
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log
+
+  echo >> configure.log
+  cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+int mytest(const char *fmt, ...)
+{
+  char buf[20];
+  va_list ap;
+  va_start(ap, fmt);
+  vsnprintf(buf, sizeof(buf), fmt, ap);
+  va_end(ap);
+  return 0;
+}
+int main()
+{
+  return (mytest("Hello%d\n", 1));
+}
+EOF
+  if try $CC $CFLAGS -o $test $test.c; then
+    echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log
+
+    echo >> configure.log
+    cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+int mytest(const char *fmt, ...)
+{
+  int n;
+  char buf[20];
+  va_list ap;
+  va_start(ap, fmt);
+  n = vsnprintf(buf, sizeof(buf), fmt, ap);
+  va_end(ap);
+  return n;
+}
+int main()
+{
+  return (mytest("Hello%d\n", 1));
+}
+EOF
+
+    if try $CC -c $CFLAGS $test.c; then
+      echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log
+    else
+      CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsnprintf_void"
+      echo "Checking for return value of vsnprintf()... No." | tee -a configure.log
+      echo "  WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
+      echo "  vulnerabilities." | tee -a configure.log
+    fi
+  else
+    CFLAGS="$CFLAGS -DNO_vsnprintf"
+    SFLAGS="$SFLAGS -DNO_vsnprintf"
+    echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log
+    echo "  WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log
+    echo "  can build but will be open to possible buffer-overflow security" | tee -a configure.log
+    echo "  vulnerabilities." | tee -a configure.log
+
+    echo >> configure.log
+    cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+int mytest(const char *fmt, ...)
+{
+  int n;
+  char buf[20];
+  va_list ap;
+  va_start(ap, fmt);
+  n = vsprintf(buf, fmt, ap);
+  va_end(ap);
+  return n;
+}
+int main()
+{
+  return (mytest("Hello%d\n", 1));
+}
+EOF
+
+    if try $CC -c $CFLAGS $test.c; then
+      echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log
+    else
+      CFLAGS="$CFLAGS -DHAS_vsprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsprintf_void"
+      echo "Checking for return value of vsprintf()... No." | tee -a configure.log
+      echo "  WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
+      echo "  vulnerabilities." | tee -a configure.log
+    fi
+  fi
+else
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log
+
+  echo >> configure.log
+  cat >$test.c <<EOF
+#include <stdio.h>
+int mytest()
+{
+  char buf[20];
+  snprintf(buf, sizeof(buf), "%s", "foo");
+  return 0;
+}
+int main()
+{
+  return (mytest());
+}
+EOF
+
+  if try $CC $CFLAGS -o $test $test.c; then
+    echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log
+
+    echo >> configure.log
+    cat >$test.c <<EOF
+#include <stdio.h>
+int mytest()
+{
+  char buf[20];
+  return snprintf(buf, sizeof(buf), "%s", "foo");
+}
+int main()
+{
+  return (mytest());
+}
+EOF
+
+    if try $CC -c $CFLAGS $test.c; then
+      echo "Checking for return value of snprintf()... Yes." | tee -a configure.log
+    else
+      CFLAGS="$CFLAGS -DHAS_snprintf_void"
+      SFLAGS="$SFLAGS -DHAS_snprintf_void"
+      echo "Checking for return value of snprintf()... No." | tee -a configure.log
+      echo "  WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
+      echo "  vulnerabilities." | tee -a configure.log
+    fi
+  else
+    CFLAGS="$CFLAGS -DNO_snprintf"
+    SFLAGS="$SFLAGS -DNO_snprintf"
+    echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log
+    echo "  WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log
+    echo "  can build but will be open to possible buffer-overflow security" | tee -a configure.log
+    echo "  vulnerabilities." | tee -a configure.log
+
+    echo >> configure.log
+    cat >$test.c <<EOF
+#include <stdio.h>
+int mytest()
+{
+  char buf[20];
+  return sprintf(buf, "%s", "foo");
+}
+int main()
+{
+  return (mytest());
+}
+EOF
+
+    if try $CC -c $CFLAGS $test.c; then
+      echo "Checking for return value of sprintf()... Yes." | tee -a configure.log
+    else
+      CFLAGS="$CFLAGS -DHAS_sprintf_void"
+      SFLAGS="$SFLAGS -DHAS_sprintf_void"
+      echo "Checking for return value of sprintf()... No." | tee -a configure.log
+      echo "  WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
+      echo "  vulnerabilities." | tee -a configure.log
+    fi
+  fi
+fi
+
+# see if we can hide zlib internal symbols that are linked between separate source files
+if test "$gcc" -eq 1; then
+  echo >> configure.log
+  cat > $test.c <<EOF
+#define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+int ZLIB_INTERNAL foo;
+int main()
+{
+  return 0;
+}
+EOF
+  if tryboth $CC -c $CFLAGS $test.c; then
+    CFLAGS="$CFLAGS -DHAVE_HIDDEN"
+    SFLAGS="$SFLAGS -DHAVE_HIDDEN"
+    echo "Checking for attribute(visibility) support... Yes." | tee -a configure.log
+  else
+    echo "Checking for attribute(visibility) support... No." | tee -a configure.log
+  fi
+fi
+
+# show the results in the log
+echo >> configure.log
+echo ALL = $ALL >> configure.log
+echo AR = $AR >> configure.log
+echo ARFLAGS = $ARFLAGS >> configure.log
+echo CC = $CC >> configure.log
+echo CFLAGS = $CFLAGS >> configure.log
+echo CPP = $CPP >> configure.log
+echo EXE = $EXE >> configure.log
+echo LDCONFIG = $LDCONFIG >> configure.log
+echo LDFLAGS = $LDFLAGS >> configure.log
+echo LDSHARED = $LDSHARED >> configure.log
+echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log
+echo OBJC = $OBJC >> configure.log
+echo PIC_OBJC = $PIC_OBJC >> configure.log
+echo RANLIB = $RANLIB >> configure.log
+echo SFLAGS = $SFLAGS >> configure.log
+echo SHAREDLIB = $SHAREDLIB >> configure.log
+echo SHAREDLIBM = $SHAREDLIBM >> configure.log
+echo SHAREDLIBV = $SHAREDLIBV >> configure.log
+echo STATICLIB = $STATICLIB >> configure.log
+echo TEST = $TEST >> configure.log
+echo VER = $VER >> configure.log
+echo Z_U4 = $Z_U4 >> configure.log
+echo exec_prefix = $exec_prefix >> configure.log
+echo includedir = $includedir >> configure.log
+echo libdir = $libdir >> configure.log
+echo mandir = $mandir >> configure.log
+echo prefix = $prefix >> configure.log
+echo sharedlibdir = $sharedlibdir >> configure.log
+echo uname = $uname >> configure.log
+
+# udpate Makefile with the configure results
+sed < Makefile.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^SFLAGS *=/s#=.*#=$SFLAGS#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^CPP *=/s#=.*#=$CPP#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR#
+/^ARFLAGS *=/s#=.*#=$ARFLAGS#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^LDCONFIG *=/s#=.*#=$LDCONFIG#
+/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^OBJC *=/s#=.*#= $OBJC#
+/^PIC_OBJC *=/s#=.*#= $PIC_OBJC#
+/^all: */s#:.*#: $ALL#
+/^test: */s#:.*#: $TEST#
+" > Makefile
+
+# create zlib.pc with the configure results
+sed < zlib.pc.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^CPP *=/s#=.*#=$CPP#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR#
+/^ARFLAGS *=/s#=.*#=$ARFLAGS#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+" | sed -e "
+s/\@VERSION\@/$VER/g;
+" > zlib.pc
+
+# done
+leave 0