Internet-Draft | Advertise Link No | July 2023 |
Chen, et al. | Expires 10 January 2024 | [Page] |
This document describes OSPF and IS-IS extensions for distributing the link numbers assigned to the links originating at a node.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 10 January 2024.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
When the links originating at each node in a network are numbered from 1 to the number of the such links for that node, an efficient stateless multicast along an explicit P2MP path can be achieved through using the link numbers of the links on the path to represent the path.¶
This document proposes OSPF and IS-IS extensions for distributing the link numbers assigned to the links originating at a node which will support such multicast. After a controller such as PCE as a controller has the link numbers of the links originating at every node, for an explicit P2MP path, the controller can send the ingress the path represented by the link numbers of the links on the path.¶
This section describes extensions to OSPFv2 for distributing the link numbers assigned to the links of a node.¶
[RFC7684] defines the OSPFv2 Extended Link TLV to advertise the information about a link. Multiple Link TLVs for the links of a router are included in the OSPFv2 Extended Link Opaque LSA of the router. The OSPFv2 Extended Link TLV has the following format:¶
Under the OSPFv2 Extended Link TLV for a link, a Link Number Sub-TLV is defined for distributing the link number assigned to the link by the router originating the LSA. A Link Number Sub-TLV is included in the Link TLV for a link of Link Type Point-to-Point, Broadcast (i.e., link to LAN or Transit Network), or stub (i.e., link to stub network). The Link Number Sub-TLV has the following format:¶
This section describes extensions to OSPFv3 for distributing the link numbers assigned to the links of a node.¶
[RFC8362] defines the OSPFv3 Extended Router LSA, which may include multiple Router-Link TLVs.¶
A Router-Link TLV defines a single router link.¶
Under the Router-Link TLV for a link, a Link Number Sub-TLV is defined. This Sub-TLV has the same format as the Link Number Sub-TLV defined above for the OSPFv2 Extended Link TLV.¶
The Router-Link TLV for a link may include a Link Number Sub-TLV for distributing the link number assigned to the link by the router originating the LSA.¶
This section describes extensions to IS-IS for distributing the link numbers assigned to the links of a node.¶
The Extended IS Reachability TLV (Type 22) defined in [RFC5305] may contain Sub-TLVs (such as those for TE (Traffic Engineering)) that apply to a link/interface to a neighbor. To encode multiple links or interfaces to neighbors, the structure inside TLV is repeated.¶
The Multi-Topology (MT) Intermediate Systems TLV (Type 222) defined in [RFC5120] may contain Sub-TLVs (such as those for TE) that apply to a link/interface. It is aligned with the Extended IS Reachability TLV (Type 22) but has an additional two bytes in front at the beginning of the TLV for MT-ID.¶
A Link Number Sub-TLV is defined and used in the Extended IS Reachability TLV (Type 22) and/or MT Intermediate Systems TLV (Type 222) to advertise the link numbers assigned to the links of a node.¶
The Link Number Sub-TLV has the following format:¶
Under "OSPFv2 Extended Link TLV Sub-TLVs registry" as defined in [RFC7684], IANA is requested to assign a registry value for Link Number Sub-TLV as follows:¶
+==============+======================+=====================+ | Value | Description | reference | +==============+======================+=====================+ | TBD1 | Link Number | This document | +--------------+----------------------+---------------------+¶
Under "OSPFv3 Extended-LSA Sub-TLVs registry" as defined in [RFC8362], IANA is requested to assign a registry value for Link Number Sub-TLV as follows:¶
+==============+======================+=====================+ | Value | Description | reference | +==============+======================+=====================+ | TBD2 | Link Number | This document | +--------------+----------------------+---------------------+¶
Under "Sub-TLVs for TLVs 22, 23, 25, 141, 222, and 223" for IS-IS TLV Codepoints, IANA is requested to assign a codepoint for Link Number Sub-TLV as follows:¶
+============+===================+==+==+==+===+===+===+=============+ |Sub-TLV Type|Sub-TLV Name |22|23|25|141|222|223|reference | +============+===================+==+==+==+===+===+===+=============+ | TBD3 |Link Number |y |n |n | n | y | n |This document| +------------+-------------------+--+--+--+---+---+---+-------------+¶
TBD.¶