--- /dev/null
+#
+# Sample configuration file for the Samba suite for Debian GNU/Linux.
+#
+#
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options most of which
+# are not shown in this example
+#
+# Any line which starts with a ; (semi-colon) or a # (hash)
+# is a comment and is ignored. In this example we will use a #
+# for commentary and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command
+# "testparm" to check that you have not made any basic syntactic
+# errors.
+#
+
+#======================= Global Settings =======================
+
+[global]
+
+## Browsing/Identification ###
+
+# Change this to the workgroup/NT-domain name your Samba server will part of
+ workgroup =
+
+# server string is the equivalent of the NT Description field
+ server string = %h server
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
+; wins support = no
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+; wins server = w.x.y.z
+
+# This will prevent nmbd to search for NetBIOS names through DNS.
+ dns proxy = no
+
+# What naming service and in what order should we use to resolve host names
+# to IP addresses
+; name resolve order = lmhosts host wins bcast
+
+#### Networking ####
+
+# The specific set of interfaces / networks to bind to
+# This can be either the interface name or an IP address/netmask;
+# interface names are normally preferred
+; interfaces = 127.0.0.0/8 eth0
+
+# Only bind to the named interfaces and/or networks; you must use the
+# 'interfaces' option above to use this.
+# It is recommended that you enable this feature if your Samba machine is
+# not protected by a firewall or is a firewall itself. However, this
+# option cannot handle dynamic or non-broadcast interfaces correctly.
+; bind interfaces only = true
+
+
+
+#### Debugging/Accounting ####
+
+# This tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+ max log size = 1000
+
+# If you want Samba to only log through syslog then set the following
+# parameter to 'yes'.
+; syslog only = no
+
+# We want Samba to log a minimum amount of information to syslog. Everything
+# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
+# through syslog you should set the following parameter to something higher.
+ syslog = 0
+
+# Do something sensible when Samba crashes: mail the admin a backtrace
+ panic action = /usr/share/samba/panic-action %d
+
+
+####### Authentication #######
+
+# "security = user" is always a good idea. This will require a Unix account
+# in this server for every user accessing the server. See
+# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
+# in the samba-doc package for details.
+ security = user
+
+# You may wish to use password encryption. See the section on
+# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
+ encrypt passwords = true
+
+# If you are using encrypted passwords, Samba will need to know what
+# password database type you are using.
+ passdb backend = tdbsam
+
+ obey pam restrictions = yes
+
+; guest account = nobody
+ invalid users = root
+
+# This boolean parameter controls whether Samba attempts to sync the Unix
+# password with the SMB password when the encrypted SMB password in the
+# passdb is changed.
+; unix password sync = no
+
+# For Unix password sync to work on a Debian GNU/Linux system, the following
+# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
+# sending the correct chat script for the passwd program in Debian Sarge).
+ passwd program = /usr/bin/passwd %u
+ passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
+
+# This boolean controls whether PAM will be used for password changes
+# when requested by an SMB client instead of the program listed in
+# 'passwd program'. The default is 'no'.
+; pam password change = no
+
+########## Domains ###########
+
+# Is this machine able to authenticate users. Both PDC and BDC
+# must have this setting enabled. If you are the BDC you must
+# change the 'domain master' setting to no
+#
+; domain logons = yes
+#
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of the user's profile directory
+# from the client point of view)
+# The following required a [profiles] share to be setup on the
+# samba server (see below)
+; logon path = \\%N\profiles\%U
+# Another common choice is storing the profile in the user's home directory
+; logon path = \\%N\%U\profile
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of a user's home directory (from the client
+# point of view)
+; logon drive = H:
+; logon home = \\%N\%U
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the script to run during logon. The script must be stored
+# in the [netlogon] share
+# NOTE: Must be store in 'DOS' file format convention
+; logon script = logon.cmd
+
+# This allows Unix users to be created on the domain controller via the SAMR
+# RPC pipe. The example command creates a user account with a disabled Unix
+# password; please adapt to your needs
+; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
+
+########## Printing ##########
+
+# If you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+; load printers = yes
+
+# lpr(ng) printing. You may wish to override the location of the
+# printcap file
+; printing = bsd
+; printcap name = /etc/printcap
+
+# CUPS printing. See also the cupsaddsmb(8) manpage in the
+# cupsys-client package.
+; printing = cups
+; printcap name = cups
+
+# When using [print$], root is implicitly a 'printer admin', but you can
+# also give this right to other users to add drivers and set printer
+# properties
+; printer admin = @ntadmin
+
+
+############ Misc ############
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+; include = /home/samba/etc/smb.conf.%m
+
+# Most people will find that this option gives better performance.
+# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
+# for details
+# You may want to add the following on a Linux system:
+# SO_RCVBUF=8192 SO_SNDBUF=8192
+ socket options = TCP_NODELAY
+
+# The following parameter is useful only if you have the linpopup package
+# installed. The samba maintainer and the linpopup maintainer are
+# working to ease installation and configuration of linpopup and samba.
+; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
+
+# Domain Master specifies Samba to be the Domain Master Browser. If this
+# machine will be configured as a BDC (a secondary logon server), you
+# must set this to 'no'; otherwise, the default behavior is recommended.
+; domain master = auto
+
+# Some defaults for winbind (make sure you're not using the ranges
+# for something else.)
+; idmap uid = 10000-20000
+; idmap gid = 10000-20000
+; template shell = /bin/bash
+;
+; The following was the default behaviour in sarge
+; but samba upstream reverted the default because it might induce
+; performance issues in large organizations
+; See #368251 for some of the consequences of *not* having
+; this setting and smb.conf(5) for all details
+;
+; winbind enum groups = yes
+; winbind enum users = yes
+
+#======================= Share Definitions =======================
+
+[homes]
+ comment = Home Directories
+ browseable = no
+
+# By default, the home directories are exported read-only. Change next
+# parameter to 'yes' if you want to be able to write to them.
+ writable = no
+
+# File creation mask is set to 0700 for security reasons. If you want to
+# create files with group=rw permissions, set next parameter to 0775.
+ create mask = 0700
+
+# Directory creation mask is set to 0700 for security reasons. If you want to
+# create dirs. with group=rw permissions, set next parameter to 0775.
+ directory mask = 0700
+
+# Restrict access to home directories
+# to the one of the authenticated user
+# This might need tweaking when using external authentication schemes
+ valid users = %S
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+# (you need to configure Samba to act as a domain controller too.)
+;[netlogon]
+; comment = Network Logon Service
+; path = /home/samba/netlogon
+; guest ok = yes
+; writable = no
+; share modes = no
+
+# Un-comment the following and create the profiles directory to store
+# users profiles (see the "logon path" option above)
+# (you need to configure Samba to act as a domain controller too.)
+# The path below should be writable by all users so that their
+# profile directory may be created the first time they log on
+;[profiles]
+; comment = Users profiles
+; path = /home/samba/profiles
+; guest ok = no
+; browseable = no
+; create mask = 0600
+; directory mask = 0700
+
+[printers]
+ comment = All Printers
+ browseable = no
+ path = /var/spool/samba
+ printable = yes
+ public = no
+ writable = no
+ create mode = 0700
+
+# Windows clients look for this share name as a source of downloadable
+# printer drivers
+[print$]
+ comment = Printer Drivers
+ path = /var/lib/samba/printers
+ browseable = yes
+ read only = yes
+ guest ok = no
+# Uncomment to allow remote administration of Windows print drivers.
+# Replace 'ntadmin' with the name of the group your admin users are
+# members of.
+; write list = root, @ntadmin
+
+# A sample share for sharing your CD-ROM with others.
+;[cdrom]
+; comment = Samba server's CD-ROM
+; writable = no
+; locking = no
+; path = /cdrom
+; public = yes
+
+# The next two parameters show how to auto-mount a CD-ROM when the
+# cdrom share is accesed. For this to work /etc/fstab must contain
+# an entry like this:
+#
+# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
+#
+# The CD-ROM gets unmounted automatically after the connection to the
+#
+# If you don't want to use auto-mounting/unmounting make sure the CD
+# is mounted on /cdrom
+#
+; preexec = /bin/mount /cdrom
+; postexec = /bin/umount /cdrom
+
--- /dev/null
+#
+# Sample configuration file for the Samba suite for Debian GNU/Linux.
+#
+#
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options most of which
+# are not shown in this example
+#
+# Any line which starts with a ; (semi-colon) or a # (hash)
+# is a comment and is ignored. In this example we will use a #
+# for commentary and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command
+# "testparm" to check that you have not made any basic syntactic
+# errors.
+#
+
+#======================= Global Settings =======================
+
+[global]
+
+## Browsing/Identification ###
+
+# Change this to the workgroup/NT-domain name your Samba server will part of
+ workgroup =
+
+# server string is the equivalent of the NT Description field
+ server string = %h server
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
+; wins support = no
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+; wins server = w.x.y.z
+
+# This will prevent nmbd to search for NetBIOS names through DNS.
+ dns proxy = no
+
+# What naming service and in what order should we use to resolve host names
+# to IP addresses
+; name resolve order = lmhosts host wins bcast
+
+#### Networking ####
+
+# The specific set of interfaces / networks to bind to
+# This can be either the interface name or an IP address/netmask;
+# interface names are normally preferred
+; interfaces = 127.0.0.0/8 eth0
+
+# Only bind to the named interfaces and/or networks; you must use the
+# 'interfaces' option above to use this.
+# It is recommended that you enable this feature if your Samba machine is
+# not protected by a firewall or is a firewall itself. However, this
+# option cannot handle dynamic or non-broadcast interfaces correctly.
+; bind interfaces only = true
+
+
+
+#### Debugging/Accounting ####
+
+# This tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+ max log size = 1000
+
+# If you want Samba to only log through syslog then set the following
+# parameter to 'yes'.
+; syslog only = no
+
+# We want Samba to log a minimum amount of information to syslog. Everything
+# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
+# through syslog you should set the following parameter to something higher.
+ syslog = 0
+
+# Do something sensible when Samba crashes: mail the admin a backtrace
+ panic action = /usr/share/samba/panic-action %d
+
+
+####### Authentication #######
+
+# "security = user" is always a good idea. This will require a Unix account
+# in this server for every user accessing the server. See
+# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
+# in the samba-doc package for details.
+; security = user
+
+# You may wish to use password encryption. See the section on
+# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
+ encrypt passwords = true
+
+# If you are using encrypted passwords, Samba will need to know what
+# password database type you are using.
+ passdb backend = tdbsam
+
+ obey pam restrictions = yes
+
+; guest account = nobody
+ invalid users = root
+
+# This boolean parameter controls whether Samba attempts to sync the Unix
+# password with the SMB password when the encrypted SMB password in the
+# passdb is changed.
+; unix password sync = no
+
+# For Unix password sync to work on a Debian GNU/Linux system, the following
+# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
+# sending the correct chat script for the passwd program in Debian Sarge).
+ passwd program = /usr/bin/passwd %u
+ passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
+
+# This boolean controls whether PAM will be used for password changes
+# when requested by an SMB client instead of the program listed in
+# 'passwd program'. The default is 'no'.
+; pam password change = no
+
+########## Domains ###########
+
+# Is this machine able to authenticate users. Both PDC and BDC
+# must have this setting enabled. If you are the BDC you must
+# change the 'domain master' setting to no
+#
+; domain logons = yes
+#
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of the user's profile directory
+# from the client point of view)
+# The following required a [profiles] share to be setup on the
+# samba server (see below)
+; logon path = \\%N\profiles\%U
+# Another common choice is storing the profile in the user's home directory
+; logon path = \\%N\%U\profile
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of a user's home directory (from the client
+# point of view)
+; logon drive = H:
+; logon home = \\%N\%U
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the script to run during logon. The script must be stored
+# in the [netlogon] share
+# NOTE: Must be store in 'DOS' file format convention
+; logon script = logon.cmd
+
+# This allows Unix users to be created on the domain controller via the SAMR
+# RPC pipe. The example command creates a user account with a disabled Unix
+# password; please adapt to your needs
+; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
+
+########## Printing ##########
+
+# If you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+; load printers = yes
+
+# lpr(ng) printing. You may wish to override the location of the
+# printcap file
+; printing = bsd
+; printcap name = /etc/printcap
+
+# CUPS printing. See also the cupsaddsmb(8) manpage in the
+# cupsys-client package.
+; printing = cups
+; printcap name = cups
+
+# When using [print$], root is implicitly a 'printer admin', but you can
+# also give this right to other users to add drivers and set printer
+# properties
+; printer admin = @ntadmin
+
+
+############ Misc ############
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+; include = /home/samba/etc/smb.conf.%m
+
+# Most people will find that this option gives better performance.
+# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
+# for details
+# You may want to add the following on a Linux system:
+# SO_RCVBUF=8192 SO_SNDBUF=8192
+ socket options = TCP_NODELAY
+
+# The following parameter is useful only if you have the linpopup package
+# installed. The samba maintainer and the linpopup maintainer are
+# working to ease installation and configuration of linpopup and samba.
+; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
+
+# Domain Master specifies Samba to be the Domain Master Browser. If this
+# machine will be configured as a BDC (a secondary logon server), you
+# must set this to 'no'; otherwise, the default behavior is recommended.
+; domain master = auto
+
+# Some defaults for winbind (make sure you're not using the ranges
+# for something else.)
+; idmap uid = 10000-20000
+; idmap gid = 10000-20000
+; template shell = /bin/bash
+;
+; The following was the default behaviour in sarge
+; but samba upstream reverted the default because it might induce
+; performance issues in large organizations
+; See #368251 for some of the consequences of *not* having
+; this setting and smb.conf(5) for all details
+;
+; winbind enum groups = yes
+; winbind enum users = yes
+
+#======================= Share Definitions =======================
+
+[homes]
+ comment = Home Directories
+ browseable = no
+
+# By default, the home directories are exported read-only. Change next
+# parameter to 'yes' if you want to be able to write to them.
+ writable = no
+
+# File creation mask is set to 0700 for security reasons. If you want to
+# create files with group=rw permissions, set next parameter to 0775.
+ create mask = 0700
+
+# Directory creation mask is set to 0700 for security reasons. If you want to
+# create dirs. with group=rw permissions, set next parameter to 0775.
+ directory mask = 0700
+
+# Restrict access to home directories
+# to the one of the authenticated user
+# This might need tweaking when using external authentication schemes
+ valid users = %S
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+# (you need to configure Samba to act as a domain controller too.)
+;[netlogon]
+; comment = Network Logon Service
+; path = /home/samba/netlogon
+; guest ok = yes
+; writable = no
+; share modes = no
+
+# Un-comment the following and create the profiles directory to store
+# users profiles (see the "logon path" option above)
+# (you need to configure Samba to act as a domain controller too.)
+# The path below should be writable by all users so that their
+# profile directory may be created the first time they log on
+;[profiles]
+; comment = Users profiles
+; path = /home/samba/profiles
+; guest ok = no
+; browseable = no
+; create mask = 0600
+; directory mask = 0700
+
+[printers]
+ comment = All Printers
+ browseable = no
+ path = /var/spool/samba
+ printable = yes
+ public = no
+ writable = no
+ create mode = 0700
+
+# Windows clients look for this share name as a source of downloadable
+# printer drivers
+[print$]
+ comment = Printer Drivers
+ path = /var/lib/samba/printers
+ browseable = yes
+ read only = yes
+ guest ok = no
+# Uncomment to allow remote administration of Windows print drivers.
+# Replace 'ntadmin' with the name of the group your admin users are
+# members of.
+; write list = root, @ntadmin
+
+# A sample share for sharing your CD-ROM with others.
+;[cdrom]
+; comment = Samba server's CD-ROM
+; writable = no
+; locking = no
+; path = /cdrom
+; public = yes
+
+# The next two parameters show how to auto-mount a CD-ROM when the
+# cdrom share is accesed. For this to work /etc/fstab must contain
+# an entry like this:
+#
+# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
+#
+# The CD-ROM gets unmounted automatically after the connection to the
+#
+# If you don't want to use auto-mounting/unmounting make sure the CD
+# is mounted on /cdrom
+#
+; preexec = /bin/mount /cdrom
+; postexec = /bin/umount /cdrom
+
projects / carnet-upgrade.git / commitdiff