Added original config files.

[carnet-upgrade.git] / usr / share / carnet-upgrade / files / etc / amavis / amavisd.conf

use strict;

# Configuration file for amavisd-new
# Defaults modified for the Debian amavisd-new package
# $Id: amavisd.conf,v 1.27.2.2 2004/11/18 23:27:55 hmh Exp $
#
# This software is licensed under the GNU General Public License (GPL).
# See comments at the start of amavisd-new for the whole license text.

#Sections:
# Section I    - Essential daemon and MTA settings
# Section II   - MTA specific
# Section III  - Logging
# Section IV   - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
# Section V    - Per-recipient and per-sender handling, whitelisting, etc.
# Section VI   - Resource limits
# Section VII  - External programs, virus scanners, SpamAssassin
# Section VIII - Debugging

#GENERAL NOTES:
#  This file is a normal Perl code, interpreted by Perl itself.
#  - make sure this file (or directory where it resides) is NOT WRITABLE
#    by mere mortals (not even vscan/amavis; best to make it owned by root),
#    otherwise it represents a severe security risk!
#  - for values which are interpreted as booleans, it is recommended
#    to use 1 for true, undef for false.
#    THIS IS DIFFERENT FROM OLD AMAVIS VERSIONS where "no" also meant false,
#    now it means true, like any nonempty string does!
#  - Perl syntax applies. Most notably: strings in "" may include variables
#    (which start with $ or @); to include characters @ and $ in double
#    quoted strings, precede them by a backslash; in single-quoted strings
#    the $ and @ lose their special meaning, so it is usually easier to use
#    single quoted strings (or qw operator) for e-mail addresses.
#    Still, in both cases a backslash needs to be doubled.
#  - variables with names starting with a '@' are lists, the values assigned
#    to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
#    note the comma-separation and parenthesis. If strings in the list
#    do not contain spaces nor variables, a Perl operator qw() may be used
#    as a shorthand to split its argument on whitespace and produce a list
#    of strings, e.g. qw( one@foo example.com three );  Note that the argument
#    to qw is quoted implicitly and no variable interpretation is done within
#    (no '$' variable evaluations). The #-initiated comments can NOT be used
#    within a string. In other words, $ and # lose their special meaning
#    within a qw argument, just like within '...' strings.
#  - all e-mail addresses in this file and as used internally by the daemon
#    are in their raw (rfc2821-unquoted and non-bracketed) form, i.e. 
#    Bob "Funny" Dude@example.com, not: "Bob \"Funny\" Dude"@example.com
#    and not <"Bob \"Funny\" Dude"@example.com>; also: '' and not '<>'.
#  - the term 'default value' in examples below refers to the value of a
#    variable pre-assigned to it by the program; any explicit assignment
#    to a variable in this configuration file overrides the default value;


#
# Section I - Essential daemon and MTA settings
#

# $MYHOME serves as a quick default for some other configuration settings.
# More refined control is available with each individual setting further down.
# $MYHOME is not used directly by the program. No trailing slash!
$MYHOME = '/var/lib/amavis';   # (default is '/var/amavis')

# $mydomain serves as a quick default for some other configuration settings.
# More refined control is available with each individual setting further down.
# $mydomain is never used directly by the program.
$mydomain = 'example.com';      # (no useful default)

# $myhostname = 'host.example.com';  # fqdn of this host, default by uname(3)

# Set the user and group to which the daemon will change if started as root
# (otherwise just keeps the UID unchanged, and these settings have no effect):
$daemon_user  = 'amavis';       # (no default (undef))
$daemon_group = 'amavis';       # (no default (undef))

# Runtime working directory (cwd), and a place where
# temporary directories for unpacking mail are created.
# if you change this, you might want to modify the cleanup()
# function in /etc/init.d/amavisd-new
# (no trailing slash, may be a scratch file system)
$TEMPBASE = $MYHOME;           # (must be set if other config vars use is)
#$TEMPBASE = "$MYHOME/tmp";     # prefer to keep home dir /var/amavis clean?

# $helpers_home sets environment variable HOME, and is passed as option
# 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
# on a normal persistent file system, not a scratch or temporary file system
#$helpers_home = $MYHOME;      # (defaults to $MYHOME)

# Run the daemon in the specified chroot jail if nonempty:
#$daemon_chroot_dir = $MYHOME;  # (default is undef, meaning: do not chroot)

$pid_file  = "/var/run/amavis/amavisd.pid";  # (default: "$MYHOME/amavisd.pid")
$lock_file = "/var/run/amavis/amavisd.lock"; # (default: "$MYHOME/amavisd.lock")

# set environment variables if you want (no defaults):
$ENV{TMPDIR} = $TEMPBASE;       # wise to set TMPDIR, but not obligatory
#...


# MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
# both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'

# POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
# (set host and port number as required; host can be specified
# as IP address or DNS name (A or CNAME, but MX is ignored)
#$forward_method = 'smtp:127.0.0.1:10025';  # where to forward checked mail
#$notify_method = $forward_method;          # where to submit notifications

# NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
#       uncomment the appropriate settings below if using other setups!

# SENDMAIL MILTER, using amavis-milter.c helper program:
# SEE amavisd-new-milter package docs FOR DEBIAN INSTRUCTIONS
#$forward_method = undef;  # no explicit forwarding, sendmail does it by itself
# milter; option -odd is needed to avoid deadlocks
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
# just a thought: can we use use -Am instead of -odd ?

# SENDMAIL (old non-milter setup, as relay):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;

# SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
#$forward_method = undef;  # no explicit forwarding, amavis.c will call LDA
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';

# EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;

# prefer to collect mail for forwarding as BSMTP files?
#$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
#$notify_method = $forward_method;


# Net::Server pre-forking settings
# You may want $max_servers to match the width of your MTA pipe
# feeding amavisd, e.g. with Postfix the 'Max procs' field in the
# master.cf file, like the '2' in the:  smtp-amavis unix - - n - 2 smtp
#
$max_servers  =  2;   # number of pre-forked children          (default 2)
$max_requests = 10;   # retire a child after that many accepts (default 10)

$child_timeout=5*60;  # abort child if it does not complete each task in n sec
                      # (default: 8*60 seconds)

# Check also the settings of @av_scanners at the end if you want to use
# virus scanners. If not, you may want to delete the whole long assignment
# to the variable @av_scanners, which will also remove the virus checking
# code (e.g. if you only want to do spam scanning).

# Here is a QUICK WAY to completely DISABLE some sections of code
# that WE DO NOT WANT (it won't even be compiled-in).
# For more refined controls leave the following two lines commented out,
# and see further down what these two lookup lists really mean.
#
# @bypass_virus_checks_acl = qw( . );  # uncomment to DISABLE anti-virus code
# @bypass_spam_checks_acl  = qw( . );  # uncomment to DISABLE anti-spam code
#
# Any setting can be changed with a new assignment, so make sure
# you do not unintentionally override these settings further down!
@bypass_spam_checks_acl  = qw( . );    # No default dependency on spamassassin

# Lookup list of local domains (see README.lookups for syntax details)
#
# NOTE:
#   For backwards compatibility the variable names @local_domains (old) and
#   @local_domains_acl (new) are synonyms. For consistency with other lookups
#   the name @local_domains_acl is now preferred. It also makes it more
#   obviously distinct from the new %local_domains hash lookup table.
#
# local_domains* lookup tables are used in deciding whether a recipient
# is local or not, or in other words, if the message is outgoing or not.
# This affects inserting spam-related headers for local recipients,
# limiting recipient virus notifications (if enabled) to local recipients,
# in deciding if address extension may be appended, and in SQL lookups
# for non-fqdn addresses. Set it up correctly if you need features
# that rely on this setting (or just leave empty otherwise).
#
# With Postfix (2.0) a quick reminder on what local domains normally are:
# a union of domains specified in: $mydestination, $virtual_alias_domains,
# $virtual_mailbox_domains, and $relay_domains.
#
@local_domains_acl = ( ".$mydomain" );  # $mydomain and its subdomains
# @local_domains_acl = ( ".$mydomain", "my.other.domain" );
# @local_domains_acl = qw();  # default is empty, no recipient treated as local
# @local_domains_acl = qw( .example.com );
# @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );

# or alternatively(A), using a Perl hash lookup table, which may be assigned
# directly, or read from a file, one domain per line; comments and empty lines
# are ignored, a dot before a domain name implies its subdomains:
#
#read_hash(\%local_domains, '/etc/amavis/local_domains');

#or alternatively(B), using a list of regular expressions:
# $local_domains_re = new_RE( qr'[@.]example\.com$'i );
#
# see README.lookups for syntax and semantics


#
# Section II - MTA specific (defaults should be ok)
#

# if $relayhost_is_client is true, the IP address in $notify_method and
# $forward_method is dynamically overridden with SMTP client peer address
# (if available), which makes it possible for several hosts to share one 
# daemon.  The static port number is also overridden, and is dynamically 
# calculated  as being one above the incoming SMTP/LMTP session port number.
#
# These are logged at level 3, so enable logging until you know you got it
# right.
$relayhost_is_client = 0;         # (defaults to false)

$insert_received_line = 1;        # behave like MTA: insert 'Received:' header
                                  # (does not apply to sendmail/milter)
                                  # (default is true (1) )

# AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
#   (used with amavis helper clients like amavis-milter.c and amavis.c,
#   NOT needed for Postfix and Exim  or dual-sendmail - keep it undefined.)
#$unix_socketname = "/var/lib/amavis/amavisd.sock"; # amavis helper protocol socket
$unix_socketname = undef;         # disable listening on a unix socket
                                  # (default is undef, i.e. disabled)

# Do we receive quoted or raw addresses from the helper program?
# (does not apply to SMTP;  defaults to true)
#$gets_addr_in_quoted_form = 1;   # "Bob \"Funny\" Dude"@example.com
#$gets_addr_in_quoted_form = 0;   # Bob "Funny" Dude@example.com



# SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
#   (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
$inet_socket_port = 10024;        # accept SMTP on this local TCP port
                                  # (default is undef, i.e. disabled)
# multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];

# SMTP SERVER (INPUT) access control
# - do not allow free access to the amavisd SMTP port !!!
#
# when MTA is at the same host, use the following (one or the other or both):
$inet_socket_bind = '127.0.0.1';  # limit socket bind to loopback interface
                                  # (default is '127.0.0.1')
@inet_acl = qw( 127.0.0.1 );      # allow SMTP access only from localhost IP
                                  # (default is qw( 127.0.0.1 ) )

# when MTA (one or more) is on a different host, use the following:
# @inet_acl = qw(127/8 10.1.0.1 10.1.0.2);  # adjust the list as appropriate
# $inet_socket_bind = undef;      # bind to all IP interfaces if undef
#
# Example1:
# @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
# permit only SMTP access from loopback and rfc1918 private address space
#
# Example2:
# @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
#                 127.0.0.1 10/8 172.16/12 192.168/16 );
# matches loopback and rfc1918 private address space except host 192.168.1.12
# and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
#
# Example3:
# @inet_acl = qw( 127/8
#                 !172.16.3.0   !172.16.3.127 172.16.3.0/25
#                 !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
# matches loopback and both halves of the 172.16.3/24 C-class,
# split into two subnets, except all four broadcast addresses
# for these subnets
#
# See README.lookups for details on specifying access control lists.


#
# Section III - Logging
#

# true (e.g. 1) => syslog;  false (e.g. 0) => logging to file
$DO_SYSLOG = 1;                 # (defaults to false)
#$SYSLOG_LEVEL = 'user.info';     # (facility.priority, default 'mail.info')

# Log file (if not using syslog)
$LOGFILE = "/var/log/amavis.log";  # (defaults to empty, no log)

#NOTE: levels are not strictly observed and are somewhat arbitrary
# 0: startup/exit/failure messages, viruses detected
# 1: args passed from client, some more interesting messages
# 2: virus scanner output, timing
# 3: server, client
# 4: decompose parts
# 5: more debug details
#$log_level = 2;                # (defaults to 0)

# Customizable template for the most interesting log file entry (e.g. with
# $log_level=0) (take care to properly quote Perl special characters like '\')
# For a list of available macros see README.customize .

# only log infected messages (useful with log level 0):
# $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
# [? %#V |[? %#F ||, from=[?%o|(?)|<%o>], to=[<%R>|,][? %i ||, quarantine %i]]#
# |, from=[?%o|(?)|<%o>], to=[<%R>|,][? %i ||, quarantine %i]]';

# log both infected and noninfected messages (default):
$log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
[?%o|(?)|<%o>] -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';


#
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
#

# Select notifications text encoding when Unicode-aware Perl is converting
# text from internal character representation to external encoding (charset
# in MIME terminology). Used as argument to Perl Encode::encode subroutine.
#
#   to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
#$hdr_encoding = 'iso-8859-1';  # (default: 'iso-8859-1')
#
#   to be used in notification body text: its encoding and Content-type.charset
#$bdy_encoding = 'iso-8859-1';  # (default: 'iso-8859-1')

# Default template texts for notifications may be overruled by directly
# assigning new text to template variables, or by reading template text
# from files. A second argument may be specified in a call to read_text(),
# specifying character encoding layer to be used when reading from the
# external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
# Text will be converted to internal character representation by Perl 5.8.0
# or later; second argument is ignored otherwise. See PerlIO::encoding,
# Encode::PerlIO and perluniintro man pages.
#
# $notify_sender_templ      = read_text('/var/amavis/notify_sender.txt');
# $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
# $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
# $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
# $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
# $notify_spam_admin_templ  = read_text('/var/amavis/notify_spam_admin.txt');

# If notification template files are collectively available in some directory,
# use read_l10n_templates which calls read_text for each known template.
#
#   read_l10n_templates('/etc/amavis/en_US');
#
# Debian available locales: en_US, pt_BR, de_DE, it_IT
read_l10n_templates('en_US', '/etc/amavis');


# Here is an overall picture (sequence of events) of how pieces fit together
# (only virus controls are shown, spam controls work the same way):
#
#   bypass_virus_checks? ==> PASS
#   no viruses?   ==> PASS
#   log virus     if $log_templ is nonempty
#   quarantine    if $virus_quarantine_to is nonempty
#   notify admin  if $virus_admin (lookup) nonempty
#   notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
#   add address extensions if adding extensions is enabled and virus will pass
#   send (non-)delivery notifications
#      to sender if DSN needed (BOUNCE or ($warn_virus_sender and D_PASS))
#   virus_lovers or final_destiny==D_PASS  ==> PASS
#   DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
#
# Equivalent flow diagram applies for spam checks.
# If a virus is detected, spam checking is skipped entirely.

# The following symbolic constants can be used in *destiny settings:
#
# D_PASS     mail will pass to recipients, regardless of bad contents;
#
# D_DISCARD  mail will not be delivered to its recipients, sender will NOT be
#            notified. Effectively we lose mail (but will be quarantined
#            unless disabled). Losing mail is not decent for a mailer,
#            but might be desired.
#
# D_BOUNCE   mail will not be delivered to its recipients, a non-delivery
#            notification (bounce) will be sent to the sender by amavisd-new;
#            Exception: bounce (DSN) will not be sent if a virus name matches
#            $viruses_that_fake_sender_re, or to messages from mailing lists
#            (Precedence: bulk|list|junk);
#
# D_REJECT   mail will not be delivered to its recipients, sender should
#            preferably get a reject, e.g. SMTP permanent reject response
#            (e.g. with milter), or non-delivery notification from MTA
#            (e.g. Postfix). If this is not possible (e.g. different recipients
#            have different tolerances to bad mail contents and not using LMTP)
#            amavisd-new sends a bounce by itself (same as D_BOUNCE).
#
# Notes:
#   D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
#            for informing the sender about non-delivery, and how informative
#            the notification can be (amavisd-new knows more than MTA);
#   With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
#            notification, colloquially called 'bounce') - depending on MTA;
#            Best suited for sendmail milter, especially for spam.
#   With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
#            reason for mail non-delivery, but unable to reject the original
#            SMTP session). Best suited to reporting viruses, and for Postfix
#            and other dual-MTA setups, which can't reject original client SMTP
#            session, as the mail has already been enqueued.

$final_virus_destiny      = D_DISCARD; # (defaults to D_BOUNCE)
$final_banned_destiny     = D_BOUNCE;  # (defaults to D_BOUNCE)
$final_spam_destiny       = D_REJECT;  # (defaults to D_REJECT)
$final_bad_header_destiny = D_PASS;  # (defaults to D_PASS), D_BOUNCE suggested

# Alternatives to consider for spam:
# - use D_PASS if clients will do filtering based on inserted mail headers;
# - use D_DISCARD, if kill_level is set safely high;
# - use D_BOUNCE instead of D_REJECT if not using milter;
#
# D_BOUNCE is preferred for viruses, but consider:
# - use D_DISCARD to avoid bothering the rest of the network, it is hopeless
#   to try to keep up with the viruses that faker the envelope sender anyway,
#   and bouncing only increases the network cost of viruses for everyone
# - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
# - use D_REJECT instead of D_BOUNCE if using milter and under heavy
#   virus storm;
#
# Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
# to D_BOUNCE.
#
# The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
# and D_PASS made settings $warnvirussender and $warnspamsender only still
# useful with D_PASS.

# The following $warn*sender settings are ONLY used when mail is
# actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
# Bounces or rejects produce non-delivery status notification anyway.

# Notify virus sender?
#$warnvirussender = 1;  # (defaults to false (undef))

# Notify spam sender?
#$warnspamsender = 1;   # (defaults to false (undef))

# Notify sender of banned files?
#$warnbannedsender = 1; # (defaults to false (undef))

# Notify sender of syntactically invalid header containing non-ASCII characters?
#$warnbadhsender = 1;   # (defaults to false (undef))

# Notify virus (or banned files) RECIPIENT?
#  (not very useful, but some policies demand it)
#$warnvirusrecip = 1;   # (defaults to false (undef))
#$warnbannedrecip = 1;  # (defaults to false (undef))

# Notify also non-local virus/banned recipients if $warn*recip is true?
#  (including those not matching local_domains*)
#$warn_offsite = 1;    # (defaults to false (undef), i.e. only notify locals)


# Treat envelope sender address as unreliable and don't send sender
# notification / bounces if name(s) of detected virus(es) match the list.
# Note that virus names are supplied by external virus scanner(s) and are
# not standardized, so virus names may need to be adjusted.
# See README.lookups for syntax, check also README.policy-on-notifications
#
$viruses_that_fake_sender_re = new_RE(
  qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i,
  qr'tanatos|lentin|bridex|mimail|trojan\.dropper|dumaru|parite|spaces'i,
  qr'dloader|galil|gibe|swen|netwatch|bics|sbrowse|sober|rox|val(hal)?la'i,
  qr'frethem|sircam|be?agle|tanx|mydoom|novarg|shimg|netsky|somefool|moodown'i,
  qr'@mm|@MM',    # mass mailing viruses as labeled by f-prot and uvscan
  qr'Worm'i,      # worms as labeled by ClamAV, Kaspersky, etc
  [qr'^(EICAR|Joke\.|Junk\.)'i         => 0],
  [qr'^(WM97|OF97|W95/CIH-|JS/Fort)'i  => 0],
  [qr/.*/ => 1],  # true by default  (remove or comment-out if undesired)
);

# where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
# - the administrator address may be a simple fixed e-mail address (a scalar),
#   or may depend on the SENDER address (e.g. its domain), in which case
#   a ref to a hash table can be specified (specify lower-cased keys,
#   dot is a catchall, see README.lookups).
#
#   Empty or undef lookup disables virus admin notifications.

# $virus_admin = undef;   # do not send virus admin notifications (default)
# $virus_admin = {'not.example.com' => '', '.' => 'virusalert@example.com'};
# $virus_admin = 'virus-admin@example.com';
$virus_admin = "postmaster\@$mydomain";         # due to D_DISCARD default

# equivalent to $virus_admin, but for spam admin notifications:
# $spam_admin = "spamalert\@$mydomain";
# $spam_admin = undef;    # do not send spam admin notifications (default)
# $spam_admin = {'not.example.com' => '', '.' => 'spamalert@example.com'};

#advanced example, using a hash lookup table:
#$virus_admin = {
# 'baduser@sub1.example.com' => 'HisBoss@sub1.example.com',
# '.sub1.example.com'  => 'virusalert@sub1.example.com',
# '.sub2.example.com'  => '',                  # don't send admin notifications
# 'a.sub3.example.com' => 'abuse@sub3.example.com',
# '.sub3.example.com'  => 'virusalert@sub3.example.com',
# '.example.com'       => 'noc@example.com',   # catchall for our virus senders
# '.'                  => 'virusalert@hq.example.com',  # catchall for the rest
#};


# whom notification reports are sent from (ENVELOPE SENDER);
# may be a null reverse path, or a fully qualified address:
#   (admin and recip sender addresses default to $mailfrom
#   for compatibility, which in turn defaults to undef (empty) )
#   If using strings in double quotes, don't forget to quote @, i.e. \@
#
#$mailfrom_notify_admin     = "virusalert\@$mydomain";
#$mailfrom_notify_recip     = "virusalert\@$mydomain";
#$mailfrom_notify_spamadmin = "spam.police\@$mydomain";

# 'From' HEADER FIELD for sender and admin notifications.
# This should be a replyable address, see rfc1894. Not to be confused
# with $mailfrom_notify_sender, which is the envelope return address
# and should be empty (null reverse path) according to rfc2821.
#
# The syntax of the 'From' header field is specified in rfc2822, section
# '3.4. Address Specification'. Note in particular that display-name must be
# a quoted-string if it contains any special characters like spaces and dots.
#
# $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
# $hdrfrom_notify_sender = 'amavisd-new <postmaster@example.com>';
# $hdrfrom_notify_sender = '"Content-Filter Master" <postmaster@example.com>';
#   (defaults to: "amavisd-new <postmaster\@$myhostname>")
# $hdrfrom_notify_admin = $mailfrom_notify_admin;
#   (defaults to: $mailfrom_notify_admin)
# $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
#   (defaults to: $mailfrom_notify_spamadmin)

# whom quarantined messages appear to be sent from (envelope sender);
# keeps original sender if undef, or set it explicitly, default is undef
$mailfrom_to_quarantine = '';   # override sender address with null return path


# Location to put infected mail into: (applies to 'local:' quarantine method)
#   empty for not quarantining, may be a file (mailbox),
#   or a directory (no trailing slash)
#   (the default value is undef, meaning no quarantine)
#
$QUARANTINEDIR = '/var/lib/amavis/virusmails';

#$virus_quarantine_method = "local:virus-%i-%n";    # default
#$spam_quarantine_method  = "local:spam-%b-%i-%n";  # default
#
#use the new 'bsmtp:' method as an alternative to the default 'local:'
#$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
#$spam_quarantine_method  = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";

# When using the 'local:' quarantine method (default), the following applies:
#
# A finer control of quarantining is available through variable
# $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
# or a ref to a hash lookup table, or a regexp lookup table object,
# which makes possible to set up per-recipient quarantine addresses.
#
# The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
# per-recipient lookup result from the hash table %$virus_quarantine_to)
# is/are interpreted as follows:
#
# VARIANT 1:
#   empty or undef disables quarantine;
#
# VARIANT 2:
#   a string NOT containing an '@';
# amavisd will behave as a local delivery agent (LDA) and will quarantine
# viruses to local files according to hash %local_delivery_aliases (pseudo
# aliases map) - see subroutine mail_to_local_mailbox() for details.
# Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
# Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
#
# * if $QUARANTINEDIR is a directory, each quarantined virus will go
#   to a separate file in the $QUARANTINEDIR directory (traditional
#   amavis style, similar to maildir mailbox format);
#
# * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
#   mailbox. All quarantined messages will be appended to this file.
#   Amavisd child process must obtain an exclusive lock on the file during
#   delivery, so this may be less efficient than using individual files
#   or forwarding to MTA, and it may not work across NFS or other non-local
#   file systems (but may be handy for pickup of quarantined files via IMAP
#   for example);
#
# VARIANT 3:
#   any email address (must contain '@').
# The e-mail messages to be quarantined will be handed to MTA
# for delivery to the specified address. If a recipient address local to MTA
# is desired, you may leave the domain part empty, e.g. 'infected@', but the
# '@' character must nevertheless be included to distinguish it from variant 2.
#
# This method enables more refined delivery control made available by MTA
# (e.g. its aliases file, other local delivery agents, dealing with
# privileges and file locking when delivering to user's mailbox, nonlocal
# delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
# will not be handed back to amavisd for checking, as this will cause a loop
# (hopefully broken at some stage)! If this can be assured, notifications
# will benefit too from not being unnecessarily virus-scanned.
#
# By default this is safe to do with Postfix and Exim v4 and dual-sendmail
# setup, but probably not safe with sendmail milter interface without
# precaution.

# (the default value is undef, meaning no quarantine)

$virus_quarantine_to  = 'virus-quarantine';    # traditional local quarantine
#$virus_quarantine_to = 'infected@';           # forward to MTA for delivery
#$virus_quarantine_to = "virus-quarantine\@$mydomain";   # similar
#$virus_quarantine_to = 'virus-quarantine@example.com';  # similar
#$virus_quarantine_to = undef;                 # no quarantine
#
#$virus_quarantine_to = new_RE(                # per-recip multiple quarantines
#  [qr'^user@example\.com$'i => 'infected@'],
#  [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
#  [qr'^(.*)(@[^@])?$'i      => 'virus-${1}${2}'],
#  [qr/.*/                   => 'virus-quarantine'] );

# similar for spam
# (the default value is undef, meaning no quarantine)
#
$spam_quarantine_to = 'spam-quarantine';
#$spam_quarantine_to = "spam-quarantine\@$mydomain";
#$spam_quarantine_to = new_RE(                 # per-recip multiple quarantines
#  [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
#  [qr/.*/                   => 'spam-quarantine'] );

# In addition to per-recip quarantine, a by-sender lookup is possible. It is
# similar to $spam_quarantine_to, but the lookup key is the sender address:
#$spam_quarantine_bysender_to = undef;   # dflt: no by-sender spam quarantine


# Add X-Virus-Scanned header field to mail?
$X_HEADER_TAG = 'X-Virus-Scanned';      # (default: undef)
# Leave empty to add no header          # (default: undef)
$X_HEADER_LINE = "by $myversion (Debian) at $mydomain";

# a string to prepend to Subject (for local recipients only) if mail could
# not be decoded or checked entirely, e.g. due to password-protected archives
$undecipherable_subject_tag = '***UNCHECKED*** ';  # undef disables it

$remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
#$remove_existing_x_scanned_headers= 1; # remove existing headers
                                        # (defaults to false)
#$remove_existing_spam_headers = 0;     # leave existing X-Spam* headers alone
$remove_existing_spam_headers  = 1;     # remove existing spam headers if
                                        # spam scanning is enabled (default)

# set $bypass_decode_parts to true if you only do spam scanning, or if you
# have a good virus scanner that can deal with compression and recursively
# unpacking archives by itself, and save amavisd the trouble.
# Disabling decoding also causes banned_files checking to only see
# MIME names and MIME content types, not the content classification types
# as provided by the file(1) utility.
# It is a double-edged sword, make sure you know what you are doing!
#
#$bypass_decode_parts = 1;              # (defaults to false)

# don't trust this file type or corresponding unpacker for this file type,
# keep both the original and the unpacked file for a virus checker to see
# (lookup key is what file(1) utility returned):
#
$keep_decoded_original_re = new_RE(
# qr'^MAIL$',   # retain full original message for virus checking (can be slow)
  qr'^MAIL-UNDECIPHERABLE$',  # retain full mail if it contains undecipherables
  qr'^(ASCII(?! cpio)|text|uuencoded|xxencoded|binhex)'i,
# qr'^Zip archive data',
);

# Checking for banned MIME types and names. If any mail part matches,
# the whole mail is rejected, much like the way viruses are handled.
# A list in object $banned_filename_re can be defined to provide a list
# of Perl regular expressions to be matched against each part's:
#
#  * Content-Type value (both declared and effective mime-type),
#    including the possible security risk content types
#    message/partial and message/external-body, as specified by rfc2046;
#
#  * declared (i.e. recommended) file names as specified by MIME subfields
#    Content-Disposition.filename and Content-Type.name, both in their
#    raw (encoded) form and in rfc2047-decoded form if applicable;
#
#  * file content type as guessed by 'file' utility, both the raw
#    result from 'file', as well as short type name, classified
#    into names such as .asc, .txt, .html, .doc, .jpg, .pdf,
#    .zip, .exe, ... - see subroutine determine_file_types().
#    This step is done only if $bypass_decode_parts is not true.
#
#  * leave $banned_filename_re undefined to disable these checks
#    (giving an empty list to new_RE() will also always return false)

$banned_filename_re = new_RE(
#  qr'^UNDECIPHERABLE$',  # is or contains any undecipherable components
   qr'\.[^.]*\.(exe|vbs|pif|scr|bat|cmd|com|dll)$'i, # some double extensions
   qr'[{}]',     # curly braces in names (serve as Class ID extensions - CLSID)
#  qr'.\.(exe|vbs|pif|scr|bat|cmd|com)$'i,           # banned extension - basic
#  qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
#         jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
#         vbe|vbs|wsc|wsf|wsh)$'ix,                  # banned extension - long
#  qr'.\.(mim|b64|bhx|hqx|xxe|uu|uue)$'i, # banned extension - WinZip vulnerab.
#  qr'^\.(zip|lha|tnef|cab)$'i,                      # banned file(1) types
#  qr'^\.exe$'i,                                     # banned file(1) types
#  qr'^application/x-msdownload$'i,                  # banned MIME types
#  qr'^application/x-msdos-program$'i,
   qr'^message/partial$'i,  # rfc2046. this one is deadly for Outcrook
#  qr'^message/external-body$'i, # block rfc2046
);
# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
# and http://www.cknow.com/vtutor/vtextensions.htm

# A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
# as well as any file name which happens to end with .exe. If only matching
# a file name is desired, but not the short name, a pattern qr'.\.exe$'i
# or similar may be used, which requires that at least one character precedes
# the '.exe', and so it will never match short file types, which always start
# with a dot.


#
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
#

# %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
#   (these should be considered policy options, they do not disable checks,
#   see bypass*checks for that!)
#
# Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
# envelope e-mail address (or domain only) to the hash %virus_lovers, or to
# the access list @virus_lovers_acl - see README.lookups and examples.
# Make sure the appropriate form (e.g. external/internal) of address
# is used in case of virtual domains, or when mapping external to internal
# addresses, etc. - this is MTA-specific.
#
# Notifications would still be generated however (see the overall
# picture above), and infected mail (if passed) gets additional header:
#   X-AMaViS-Alert: INFECTED, message contains virus: ...
# (header not inserted with milter interface!)
#
# NOTE (milter interface only): in case of multiple recipients,
# it is only possible to drop or accept the message in its entirety - for all
# recipients. If all of them are virus lovers, we'll accept mail, but if
# at least one recipient is not a virus lover, we'll discard the message.


# %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
# lookup tables:
#   (this is mainly a time-saving option, unlike virus_lovers* !)
#
# Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
# access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
# are used to skip entirely the decoding, unpacking and virus checking,
# but only if ALL recipients match the lookup.
#
# %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
# do NOT GUARANTEE the message will NOT be checked for viruses - this may
# still happen when there is more than one recipient for a message, and
# not all of them match these lookup tables. To guarantee virus delivery,
# a recipient must also match %virus_lovers/@virus_lovers_acl lookups
# (but see milter limitations above),

# NOTE: it would not be clever to base virus checks on SENDER address,
# since there are no guarantees that it is genuine. Many viruses
# and spam messages fake sender address. To achieve selective filtering
# based on the source of the mail (e.g. IP address, MTA port number, ...),
# use mechanisms provided by MTA if available.


# Similar to lookup tables controlling virus checking, there exist
# spam scanning, banned names/types, and headers_checks control counterparts:
#   %spam_lovers, @spam_lovers_acl, $spam_lovers_re
#   %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
#   %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
# and:
#   %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
#   %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
#   %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
# See README.lookups for details about the syntax.

# The following example disables spam checking altogether,
# since it matches any recipient e-mail address (any address
# is a subdomain of the top-level root DNS domain):
#   @bypass_spam_checks_acl = qw( . );

#   @bypass_header_checks_acl = qw( user@example.com );
#   @bad_header_lovers_acl    = qw( user@example.com );


# See README.lookups for further detail, and examples below.

# $virus_lovers{lc("postmaster\@$mydomain")} = 1;
# $virus_lovers{lc('postmaster@example.com')} = 1;
# $virus_lovers{lc('abuse@example.com')} = 1;
# $virus_lovers{lc('some.user@')} = 1;  # this recipient, regardless of domain
# $virus_lovers{lc('boss@example.com')} = 0; # never, even if domain matches
# $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
# $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
#or:
# @virus_lovers_acl = qw( me@lab.xxx.com !lab.xxx.com .xxx.com yyy.org );
#
# $bypass_virus_checks{lc('some.user2@butnot.example.com')} = 1;
# @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );

# @virus_lovers_acl = qw( postmaster@example.com );
# $virus_lovers_re = new_RE( qr'^(helpdesk|postmaster)@example\.com$'i );

# $spam_lovers{lc("postmaster\@$mydomain")} = 1;
# $spam_lovers{lc('postmaster@example.com')} = 1;
# $spam_lovers{lc('abuse@example.com')} = 1;
# @spam_lovers_acl = qw( !.example.com );
# $spam_lovers_re = new_RE( qr'^user@example\.com$'i );


# don't run spam check for these RECIPIENT domains:
#   @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
# or the other way around (bypass check for all BUT these):
#   @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
# a practical application: don't check outgoing mail for spam:
#   @bypass_spam_checks_acl = ( "!.$mydomain", "." );
# (a downside of which is that such mail will not count as ham in SA bayes db)


# Where to find SQL server(s) and database to support SQL lookups?
# A list of triples: (dsn,user,passw).   (dsn = data source name)
# More than one entry may be specified for multiple (backup) SQL servers.
# See 'man DBI', 'man DBD::mysql', 'man DBD::Pg', ... for details.
# When chroot-ed, accessing SQL server over inet socket may be more convenient.
#
# @lookup_sql_dsn =
#   ( ['DBI:mysql:database=mail;host=127.0.0.1;port=3306', 'user1', 'passwd1'],
#     ['DBI:mysql:database=mail;host=host2', 'username2', 'password2'] );
#
# ('mail' in the example is the database name, choose what you like)
# With PostgreSQL the dsn (first element of the triple) may look like:
#      'DBI:Pg:host=host1;dbname=mail'

# The SQL select clause to fetch per-recipient policy settings.
# The %k will be replaced by a comma-separated list of query addresses
# (e.g. full address, domain only, catchall).  Use ORDER, if there
# is a chance that multiple records will match - the first match wins.
# If field names are not unique (e.g. 'id'), the later field overwrites the
# earlier in a hash returned by lookup, which is why we use '*,users.id'.
# $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
#   ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
#   ' ORDER BY users.priority DESC';
#
# The SQL select clause to check sender in per-recipient whitelist/blacklist
# The first SELECT argument '?' will be users.id from recipient SQL lookup,
# the %k will be sender addresses (e.g. full address, domain only, catchall).
# $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
#     ' WHERE (wblist.rid=?) AND (wblist.sid=mailaddr.id)'.
#     '   AND (mailaddr.email IN (%k))'.
#   ' ORDER BY mailaddr.priority DESC';

$sql_select_white_black_list = undef;  # undef disables SQL white/blacklisting


# If you decide to pass viruses (or spam) to certain recipients using the
# above lookup tables or using $final_virus_destiny=D_PASS, you can set
# the variable $addr_extension_virus ($addr_extension_spam) to some
# string, and the recipient address will have this string appended
# as an address extension to the local-part of the address. This extension
# can be used by final local delivery agent to place such mail in different
# folders. Leave these two variables undefined or empty strings to prevent
# appending address extensions. Setting has no effect on recipient which will
# not be receiving viruses/spam. Recipients who do not match lookup tables
# local_domains* are not affected.
#
# LDAs usually default to stripping away address extension if no special
# handling is specified, so having this option enabled normally does no harm,
# provided the $recipients_delimiter matches the setting on the final
# MTA's LDA.

# $addr_extension_virus  = 'virus';     # (default is undef, same as empty)
# $addr_extension_spam   = 'spam';      # (default is undef, same as empty)
# $addr_extension_banned = 'banned';    # (default is undef, same as empty)


# Delimiter between local part of the recipient address and address extension
# (which can optionally be added, see variables $addr_extension_virus and
# $addr_extension_spam). E.g. recipient address <user@example.com> gets changed
# to <user+virus@example.com>.
#
# Delimiter should match equivalent (final) MTA delimiter setting.
# (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
# Setting it to an empty string or to undef disables this feature
# regardless of $addr_extension_virus and $addr_extension_spam settings.

$recipient_delimiter = '+';             # (default is '+')

# true: replace extension;  false: append extension
$replace_existing_extension = 1;        # (default is false)

# Affects matching of localpart of e-mail addresses (left of '@')
# in lookups: true = case sensitive, false = case insensitive
$localpart_is_case_sensitive = 0;       # (default is false)


# ENVELOPE SENDER WHITELISTING / BLACKLISTING  - GLOBAL (RECIPIENT-INDEPENDENT)
# (affects spam checking only, has no effect on virus and other checks)

# WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
# senders even if the message would be recognized as spam. Effectively, for
# the specified senders, message recipients temporarily become 'spam_lovers'.
# To avoid surprises, whitelisted sender also suppresses inserting/editing
# the tag2-level header fields (X-Spam-*, Subject), appending spam address
# extension, and quarantining.

# BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
# Effectively, for messages from blacklisted senders, spam level
# is artificially pushed high, and the normal spam processing applies,
# resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
# reactions to spam, including possible rejection. If the message nevertheless
# still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
# in the 'X-Spam-Status' header field, but the reported spam value and
# set of tests in this report header field (if available from SpamAssassin,
# which may have not been called) is not adjusted.
#
# A sender may be both white- and blacklisted at the same time, settings
# are independent. For example, being both white- and blacklisted, message
# is delivered to recipients, but is not tagged as spam (X-Spam-Flag: No;
# X-Spam-Status: No, ...), but the reported spam level (if computed) may
# still indicate high spam score.
#
# If ALL recipients of the message either white- or blacklist the sender,
# spam scanning (calling the SpamAssassin) is bypassed, saving on time.
#
# The following variables (lookup tables) are available, with the semantics
# and syntax as specified in README.lookups:
#
# %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
# %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re

# SOME EXAMPLES:
#
#ACL:
# @whitelist_sender_acl = qw( .example.com );
#
# @whitelist_sender_acl = ( ".$mydomain" );  # $mydomain and its subdomains
# NOTE: This is not a reliable way of turning off spam checks for
#       locally-originating mail, as sender address can easily be faked.
#       To reliably avoid spam-scanning outgoing mail,
#       use @bypass_spam_checks_acl .

#RE:
# $whitelist_sender_re = new_RE(
#   qr'^postmaster@.*\bexample\.com$'i,
#   qr'owner-[^@]*@'i,  qr'-request@'i,
#   qr'\.example\.com$'i );
#
$blacklist_sender_re = new_RE(
    qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
    qr'^(investments|lose_weight_today|market\.alert|money2you|MyGreenCard)@'i,
    qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonl|smoking2002k)@'i,
    qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
    qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
    qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
);

#HASH lookup variant:
# NOTE: Perl operator qw splits its argument string by whitespace
# and produces a list. This means that addresses can not contain
# whitespace, and there is no provision for comments within the string.
# You can use the normal Perl list syntax if you have special requirements,
# e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
# addresses from a file.
#

# a hash lookup table can be read from a file,
# one address per line, comments and empty lines are permitted:
#
# read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');

# ... or set directly:
map { $whitelist_sender{lc($_)}=1 } (qw(
  nobody@cert.org
  owner-alert@iss.net
  slashdot@slashdot.org
  bugtraq@securityfocus.com
  NTBUGTRAQ@LISTSERV.NTBUGTRAQ.COM
  security-alerts@linuxsecurity.com
  amavis-user-admin@lists.sourceforge.net
  razor-users-admin@lists.sourceforge.net
  notification-return@lists.sophos.com
  mailman-announce-admin@python.org
  zope-announce-admin@zope.org
  owner-postfix-users@postfix.org
  owner-postfix-announce@postfix.org
  owner-sendmail-announce@lists.sendmail.org
  sendmail-announce-request@lists.sendmail.org
  ca+envelope@sendmail.org
  owner-technews@postel.ACM.ORG
  lvs-users-admin@LinuxVirtualServer.org
  ietf-123-owner@loki.ietf.org
  cvs-commits-list-admin@gnome.org
  rt-users-admin@lists.fsck.com
  owner-announce@mnogosearch.org
  owner-hackers@ntp.org
  owner-bugs@ntp.org
  clp-request@comp.nus.edu.sg
  surveys-errors@lists.nua.ie
  emailNews@genomeweb.com
  owner-textbreakingnews@CNNIMAIL12.CNN.COM
  yahoo-dev-null@yahoo-inc.com
));


# ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT

# The same semantics as for global white/blacklisting applies, but this
# time each recipient (or its domain, or subdomain, ...) can be given
# an individual lookup table for matching senders. The per-recipient lookups
# override the global lookups, which serve as a fallback default.

# Specify a two-level lookup table: the key for the outer table is recipient,
# and the result should be an inner lookup table (hash or ACL or RE),
# where the key used will be the sender.
#
#$per_recip_blacklist_sender_lookup_tables = {
# 'user1@my.example.com'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
# 'user2@my.example.com'=>[qw( spammer@d1.example,org .d2.example,org )],
#};
#$per_recip_whitelist_sender_lookup_tables = {
# 'user@my.example.com' => [qw( friend@example.org .other.example.org )],
# '.my1.example.com'    => [qw( !foe.other.example,org .other.example,org )],
# '.my2.example.com'    => read_hash('/var/amavis/my2-wl.dat'),
# 'abuse@' => { 'postmaster@'=>1,
#               'cert-advisory-owner@cert.org'=>1, 'owner-alert@iss.net'=>1 },
#};


#
# Section VI - Resource limits
#

# Sanity limit to the number of allowed recipients per SMTP transaction
# $smtpd_recipient_limit = 1000;  # (default is 1000)


# Resource limits to protect unpackers, decompressors and virus scanners
# against mail bombs (e.g. 42.zip)

# Maximum recursion level for extraction/decoding (0 or undef disables limit)
$MAXLEVELS = 14;                # (default is undef, no limit)

# Maximum number of extracted files (0 or undef disables the limit)
$MAXFILES = 1500;               # (default is undef, no limit)

# For the cumulative total of all decoded mail parts we set max storage size
# to defend against mail bombs. Even though parts may be deleted (replaced
# by decoded text) during decoding, the size they occupied is _not_ returned
# to the quota pool.
#
# Parameters to storage quota formula for unpacking/decoding/decompressing
#   Formula:
#     quota = max($MIN_EXPANSION_QUOTA,
#                 $mail_size*$MIN_EXPANSION_FACTOR,
#                 min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
#   In plain words (later condition overrules previous ones):
#     allow MAX_EXPANSION_FACTOR times initial mail size,
#     but not more than MAX_EXPANSION_QUOTA,
#     but not less than MIN_EXPANSION_FACTOR times initial mail size,
#     but never less than MIN_EXPANSION_QUOTA
#
$MIN_EXPANSION_QUOTA =      100*1024;  # bytes  (default undef, not enforced)
$MAX_EXPANSION_QUOTA = 300*1024*1024;  # bytes  (default undef, not enforced)
$MIN_EXPANSION_FACTOR =   5;  # times original mail size  (must be specified)
$MAX_EXPANSION_FACTOR = 500;  # times original mail size  (must be specified)


#
# Section VII - External programs, virus scanners
#

# Specify a path string, which is a colon-separated string of directories
# (no trailing slashes!) to be assigned to the environment variable PATH
# and to serve for locating external programs below.

# NOTE: if $daemon_chroot_dir is nonempty, the directories will be
#       relative to the chroot directory specified;

$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';

# Specify one string or a search list of strings (first match wins).
# The string (or: each string in a list) may be an absolute path,
# or just a program name, to be located via $path;
# Empty string or undef (=default) disables the use of that external program.
# Optionally command arguments may be specified - only the first substring
# up to the whitespace is used for file searching.

$file   = 'file';   # file(1) utility; use 3.41 or later to avoid vulnerability

$gzip   = 'gzip';
$bzip2  = 'bzip2';
$lzop   = 'lzop';
$uncompress = ['uncompress', 'gzip -d', 'zcat'];
$unfreeze   = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
$arc        = ['nomarch', 'arc'];
$unarj      = ['arj', 'unarj'];  # both can extract, arj is recommended
$unrar      = ['rar', 'unrar'];  # both can extract, same options
$zoo    = 'zoo';
$lha    = 'lha';
$cpio   = 'cpio';   # comment out if cpio does not support GNU options


# SpamAssassin settings

# $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
# of the option local_tests_only. See Mail::SpamAssassin man page.
# If set to 1, SA tests are restricted to local tests only, i.e. no tests
# that require internet access will be performed.
#
$sa_local_tests_only = 1;   # (default: false)
#$sa_auto_whitelist = 1;    # turn on AWL (default: false)

# Timout for SpamAssassin. This is only used if spamassassin does NOT
# override it (which it often does if sa_local_tests_only is not true)
$sa_timeout = 30;           # timeout in seconds for a call to SpamAssassin
                            # (default is 30 seconds, undef disables it)

# AWL (auto whitelisting), requires spamassassin 2.44 or better
# $sa_auto_whitelist = 1;   # defaults to undef

$sa_mail_body_size_limit = 150*1024;  # don't waste time on SA is mail is larger
                            # (less than 1% of spam is > 64k)
                            # default: undef, no limitations

# default values, can be overridden by more specific lookups, e.g. SQL
$sa_tag_level_deflt  = 4.0; # add spam info headers if at, or above that level
$sa_tag2_level_deflt = 6.3; # add 'spam detected' headers at that level
$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
                           # at or above that level: bounce/reject/drop,
                           # quarantine, and adding mail address extension

$sa_dsn_cutoff_level = 10;  # spam level beyond which a DSN is not sent,
                            # effectively turning D_BOUNCE into D_DISCARD;
                            # undef disables this feature and is a default;

#
# The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
# may also be hashrefs to hash lookup tables, to make static per-recipient
# settings possible without having to resort to SQL or LDAP lookups.

# a quick reference:
#   tag_level  controls adding the X-Spam-Status and X-Spam-Level headers,
#   tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
#   kill_level controls 'evasive actions' (reject, quarantine, extensions);
# it only makes sense to maintain the relationship:
# tag_level <= tag2_level <= kill_level < $sa_dsn_cutoff_level

# string to prepend to Subject header field when message exceeds tag2 level
$sa_spam_subject_tag = '***SPAM*** ';   # (defaults to undef, disabled)
                             # (only seen when spam is not to be rejected
                             # and recipient is in local_domains*)

#$sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
# Example: modify Subject for all local recipients except user@example.com
#$sa_spam_modifies_subj = [qw( !user@example.com . )];

# stop anti-virus scanning when the first scanner detects a virus?
$first_infected_stops_scan = 1;  # default is false, all scanners are called

# @av_scanners is a list of n-tuples, where fields semantics is:
#  1. av scanner plain name, to be used in log and reports;
#  2. scanner program name; this string will be submitted to subroutine
#     find_external_programs(), which will try to find the full program
#     path name; if program is not found, this scanner is disabled.
#     Besides a simple string (full program path name or just the basename
#     to be looked for in PATH), this may be an array ref of alternative
#     program names or full paths - the first match in the list will be used;
#     As a special case for more complex scanners, this field may be
#     a subroutine reference, and the whole n-tuple is passed to it as args.
#  3. command arguments to be given to the scanner program;
#     a substring {} will be replaced by the directory name to be scanned,
#     i.e. "$tempdir/parts", a "*" will be replaced by file names of parts;
#  4. an array ref of av scanner exit status values, or a regexp (to be
#     matched against scanner output), indicating NO VIRUSES found;
#  5. an array ref of av scanner exit status values, or a regexp (to be
#     matched against scanner output), indicating VIRUSES WERE FOUND;
#     Note: the virus match prevails over a 'not found' match, so it is safe
#     even if the no. 4. matches for viruses too;
#  6. a regexp (to be matched against scanner output), returning a list
#     of virus names found.
#  7. and 8.: (optional) subroutines to be executed before and after scanner
#     (e.g. to set environment or current directory);
#     see examples for these at KasperskyLab AVP and Sophos sweep.

# NOTES:
#
# - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
#   whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
#   (which can be handy if all you want to do is spam scanning);
#
# - the order matters: although _all_ available entries from the list are
#   always tried regardless of their verdict, scanners are run in the order
#   specified: the report from the first one detecting a virus will be used
#   (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
#
# - it doesn't hurt to keep an unused command line scanner entry in the list
#   if the program can not be found; the path search is only performed once
#   during the program startup;
#
#   COROLLARY: to disable a scanner that _does_ exist on your system,
#   comment out its entry or use undef or '' as its program name/path
#   (second parameter). An example where this is almost a must: disable
#   Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
#   (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
#   program happens to have a name matching one of the entries ('sweep'
#   again comes to mind);
#
# - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
#   for interfacing (where the second parameter starts with \&).
#   Keeping such entry and not having a corresponding virus scanner daemon
#   causes an unnecessary connection attempt (which eventually times out,
#   but it wastes precious time). For this reason the daemonized entries
#   are commented in the distribution - just remove the '#' where needed.
#
# CERT list of av resources: http://www.cert.org/other_sources/viruses.html

@av_scanners = (

# ### http://www.vanja.com/tools/sophie/
# ['Sophie',
#   \&ask_daemon, ["{}/\n", '/var/run/sophie'],
#   qr/(?x)^ 0+ ( : | [\000\r\n]* $)/,  qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
#   qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],

# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
# ['Sophos SAVI', \&sophos_savi ],

### http://www.clamav.net/
['Clam Antivirus-clamd',
  \&ask_daemon, ["CONTSCAN {}\n", "/var/run/clamav/clamd.ctl"],
  qr/\bOK$/, qr/\bFOUND$/,
  qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
# NOTE: run clamd under the same user as amavisd;  match the socket
# name (LocalSocket) in clamav.conf to the socket name in this entry
# When running chrooted one may prefer: ["CONTSCAN {}\n","$MYHOME/clamd"],

# ### http://www.openantivirus.org/
# ['OpenAntiVirus ScannerDaemon (OAV)',
#   \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
#   qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],

# ### http://www.vanja.com/tools/trophie/
# ['Trophie',
#   \&ask_daemon, ["{}/\n", '/var/run/trophie'],
#   qr/(?x)^ 0+ ( : | [\000\r\n]* $)/,  qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
#   qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],

# ### http://www.grisoft.com/
# ['AVG Anti-Virus',
#   \&ask_daemon, ["SCAN {}\n", '127.0.0.1:55555'],
#   qr/^200/, qr/^403/, qr/^403 .*?: (.+)/ ],

# ### http://www.f-prot.com/
# ['FRISK F-Prot Daemon',
#   \&ask_daemon,
#   ["GET {}/*?-dumb%20-archive%20-packed HTTP/1.0\r\n\r\n",
#     ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
#      '127.0.0.1:10203','127.0.0.1:10204'] ],
#   qr/(?i)<summary[^>]*>clean<\/summary>/,
#   qr/(?i)<summary[^>]*>infected<\/summary>/,
#   qr/(?i)<name>(.+)<\/name>/ ],

  ['KasperskyLab AVP - aveclient',
    ['/usr/local/kav/bin/aveclient','/usr/local/share/kav/bin/aveclient',
     '/opt/kav/bin/aveclient','aveclient'],
    '-p /var/run/aveserver -s {}/*', [0,3,6,8], qr/\b(INFECTED|SUSPICION)\b/,
    qr/(?:INFECTED|SUSPICION) (.+)/,
  ],

  ['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp'],
    '-* -P -B -Y -O- {}', [0,8,16,24], [2,3,4,5,6, 18,19,20,21,22],
    qr/infected: (.+)/,
    sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
    sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
  ],

  ### The kavdaemon and AVPDaemonClient have been removed from Kasperky
  ### products and replaced by aveserver and aveclient
  ['KasperskyLab AVPDaemonClient',
    [ '/opt/AVP/kavdaemon',       'kavdaemon',
      '/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
      '/opt/AVP/AvpTeamDream',    'AvpTeamDream',
      '/opt/AVP/avpdc', 'avpdc' ],
    "-f=$TEMPBASE {}", [0,8,16,24], [2,3,4,5,6, 18,19,20,21,22],
    qr/infected: ([^\r\n]+)/ ],
    # change the startup-script in /etc/init.d/kavd to:
    #   DPARMS="-* -Y -dl -f=/var/amavis /var/amavis"
    #   (or perhaps:   DPARMS="-I0 -Y -* /var/amavis" )
    # adjusting /var/amavis above to match your $TEMPBASE.
    # The '-f=/var/amavis' is needed if not running it as root, so it
    # can find, read, and write its pid file, etc., see 'man kavdaemon'.
    # defUnix.prf: there must be an entry "*/var/amavis" (or whatever
    #   directory $TEMPBASE specifies) in the 'Names=' section.
    # cd /opt/AVP/DaemonClients; configure; cd Sample; make
    # cp AvpDaemonClient /opt/AVP/
    # su - vscan -c "${PREFIX}/kavdaemon ${DPARMS}"

  ### http://www.hbedv.com/ or http://www.centralcommand.com/
  ['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
    ['antivir','vexira'],
    '--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
    qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
         (?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
    # NOTE: if you only have a demo version, remove -z and add 214, as in:
    #  '--allfiles -noboot -nombr -rs -s {}', [0,214], qr/ALERT:|VIRUS:/,

  ### http://www.commandsoftware.com/
  ['Command AntiVirus for Linux', 'csav',
    '-all -archive -packed {}', [50], [51,52,53],
    qr/Infection: (.+)/ ],

  ### http://www.symantec.com/
  ['Symantec CarrierScan via Symantec CommandLineScanner',
    'cscmdline', '-a scan -i 1 -v -s 127.0.0.1:7777 {}',
    qr/^Files Infected:\s+0$/, qr/^Infected\b/,
    qr/^(?:Info|Virus Name):\s+(.+)/ ],

  ### http://www.symantec.com/
  ['Symantec AntiVirus Scan Engine',
    'savsecls', '-server 127.0.0.1:7777 -mode scanrepair -details -verbose {}',
    [0], qr/^Infected\b/,
    qr/^(?:Info|Virus Name):\s+(.+)/ ],
    # NOTE: check options and patterns to see which entry better applies

  ### http://www.sald.com/, http://drweb.imshop.de/
  ['drweb - DrWeb Antivirus',
    ['/usr/local/drweb/drweb', '/opt/drweb/drweb', 'drweb'],
    '-path={} -al -go -ot -cn -upn -ok-',
    [0,32], [1,33], qr' infected (?:with|by)(?: virus)? (.*)$'],

# ### http://www.sald.com/, http://www.dials.ru/english/, http://www.drweb.ru/
# ['DrWebD', \&ask_daemon,   # DrWebD 4.31 or later
#   [pack('N',1).  # DRWEBD_SCAN_CMD
#    pack('N',0x00280001).   # DONT_CHANGEMAIL, IS_MAIL, RETURN_VIRUSES
#    pack('N',     # path length
#      length("$TEMPBASE/amavis-yyyymmddTHHMMSS-xxxxx/parts/part-xxxxx")).
#    '{}/*'.       # path
#    pack('N',0).  # content size
#    pack('N',0),
#    '/var/drweb/run/drwebd.sock',
#  # '/var/amavis/var/run/drwebd.sock',   # suitable for chroot
#  # '/usr/local/drweb/run/drwebd.sock',  # FreeBSD drweb ports default
#  # '127.0.0.1:3000',                    # or over an inet socket
#   ],
#   qr/\A\x00(\x10|\x11)\x00\x00/s,              # IS_CLEAN, EVAL_KEY
#   qr/\A\x00(\x00|\x01)\x00(\x20|\x40|\x80)/s,  # KNOWN_V, UNKNOWN_V, V._MODIF
#   qr/\A.{12}(?:infected with )?([^\x00]+)\x00/s,
# ],
# # NOTE: If you are using amavis-milter, change length to:
# # length("$TEMPBASE/amavis-milter-xxxxxxxxxxxxxx/parts/part-xxxxx").

  ### http://www.f-secure.com/products/anti-virus/
  ['F-Secure Antivirus', 'fsav',
   '--dumb --mime --archive {}', [0], [3,8],
   qr/(?:infection|Infected|Suspected): (.+)/ ],

  ['CAI InoculateIT', 'inocucmd',
    '-sec -nex {}', [0], [100],
    qr/was infected by virus (.+)/ ],

  ['MkS_Vir for Linux (beta)', ['mks32','mks'],
    '-s {}/*', [0], [1,2],    # any use for options: -a -c  ?
    qr/--[ \t]*(.+)/ ], 

  ### http://www.nod32.com/
  ['ESET Software NOD32', 'nod32',
    '-all -subdir+ {}', [0], [1,2],
    qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],

  ### http://www.nod32.com/
  ['ESET Software NOD32 - Client/Server Version', 'nod32cli',
    '-a -r -d recurse --heur standard {}', [0], [10,11],
    qr/^\S+\s+infected:\s+(.+)/ ],

  ### http://www.norman.com/products_nvc.shtml
  ['Norman Virus Control v5 / Linux', 'nvcc',
    '-c -l:0 -s -u {}', [0], [1],
    qr/(?i).* virus in .* -> \'(.+)\'/ ],

  ### http://www.pandasoftware.com/
  ['Panda Antivirus for Linux', ['pavcl'],
    '-aut -aex -heu -cmp -nbr -nor -nso -eng {}',
    qr/Number of files infected[ .]*: 0(?!\d)/,
    qr/Number of files infected[ .]*: 0*[1-9]/,
    qr/Found virus :\s*(\S+)/ ],

# GeCAD AV technology is acquired by Microsoft; RAV has been discontinued.
# Check your RAV license terms before fiddling with the following two lines!
# ['GeCAD RAV AntiVirus 8', 'ravav',
#   '--all --archive --mail {}', [1], [2,3,4,5], qr/Infected: (.+)/ ],
# # NOTE: the command line switches changed with scan engine 8.5 !
# # (btw, assigning stdin to /dev/null causes RAV to fail)

  ### http://www.nai.com/
  ['NAI McAfee AntiVirus (uvscan)', 'uvscan',
    '--secure -rv --mime --summary --noboot - {}', [0], [13],
    qr/(?x) Found (?:
        \ the\ (.+)\ (?:virus|trojan)  |
        \ (?:virus|trojan)\ or\ variant\ ([^ ]+)  |
        :\ (.+)\ NOT\ a\ virus)/,
  # sub {$ENV{LD_PRELOAD}='/lib/libc.so.6'},
  # sub {delete $ENV{LD_PRELOAD}},
  ],
  # NOTE1: with RH9: force the dynamic linker to look at /lib/libc.so.6 before
  # anything else by setting environment variable LD_PRELOAD=/lib/libc.so.6
  # and then clear it when finished to avoid confusing anything else.
  # NOTE2: to treat encrypted files as viruses replace the [13] with:
  #  qr/^\s{5,}(Found|is password-protected|.*(virus|trojan))/

  ### http://www.virusbuster.hu/en/
  ['VirusBuster', ['vbuster', 'vbengcl'],
    # VirusBuster Ltd. does not support the daemon version for the workstation 
    # engine (vbuster-eng-1.12-linux-i386-libc6.tgz) any longer. The names of
    # binaries, some parameters AND return codes (from 3 to 1) changed.
    "{} -ss -i '*' -log=$MYHOME/vbuster.log", [0], [1],
    qr/: '(.*)' - Virus/ ],

# ### http://www.virusbuster.hu/en/
# ['VirusBuster (Client + Daemon)', 'vbengd',
#   # HINT: for an infected file it returns always 3,
#   # although the man-page tells a different story
#   '-f -log scandir {}', [0], [3],
#   qr/Virus found = (.*);/ ],

  ### http://www.cyber.com/
  ['CyberSoft VFind', 'vfind',
    '--vexit {}/*', [0], [23], qr/##==>>>> VIRUS ID: CVDL (.+)/,
  # sub {$ENV{VSTK_HOME}='/usr/lib/vstk'},
  ],

  ### http://www.ikarus-software.com/
  ['Ikarus AntiVirus for Linux', 'ikarus',
    '{}', [0], [40], qr/Signature (.+) found/ ],

  ### http://www.bitdefender.com/
  ['BitDefender', 'bdc',
    '--all --arc --mail {}', qr/^Infected files *:0(?!\d)/,
    qr/^(?:Infected files|Identified viruses|Suspect files) *:0*[1-9]/,
    qr/(?:suspected|infected): (.*)(?:\033|$)/ ],
);

# If no virus scanners from the @av_scanners list produce 'clean' nor
# 'infected' status (e.g. they all fail to run or the list is empty),
# then _all_ scanners from the @av_scanners_backup list are tried.
# When there are both daemonized and command-line scanners available,
# it is customary to place slower command-line scanners in the
# @av_scanners_backup list. The default choice is somewhat arbitrary,
# move entries from one list to another as desired.

@av_scanners_backup = (

  ### http://www.clamav.net/
  ['Clam Antivirus - clamscan', 'clamscan',
    "--stdout --no-summary -r --tempdir=$TEMPBASE {}", [0], [1],
    qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],

  ### http://www.f-prot.com/
  ['FRISK F-Prot Antivirus', ['f-prot','f-prot.sh'],
    '-dumb -archive -packed {}', [0,8], [3,6],
    qr/Infection: (.+)/ ],

  ### http://www.trendmicro.com/
  ['Trend Micro FileScanner', ['/etc/iscan/vscan','vscan'],
    '-za -a {}', [0], qr/Found virus/, qr/Found virus (.+) in/ ],

  ['KasperskyLab kavscanner', ['/opt/kav/bin/kavscanner','kavscanner'],
    '-i1 -xp {}', [0,10,15], [5,20,21,25],
    qr/(?:CURED|INFECTED|CUREFAILED|WARNING|SUSPICION) (.*)/ ,
    sub {chdir('/opt/kav/bin') or die "Can't chdir to kav: $!"},
    sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
  ],

# Commented out because the name 'sweep' clashes with the Debian package of
# the same name. Make sure the correct sweep is found in the path when enabling
#
# ### http://www.sophos.com/
# ['Sophos Anti Virus (sweep)', 'sweep',
#   '-nb -f -all -rec -ss -sc -archive -cab -tnef --no-reset-atime {}',
#   [0,2], qr/Virus .*? found/,
#   qr/^>>> Virus(?: fragment)? '?(.*?)'? found/,
# ],
# # other options to consider: -mime -oe -idedir=/usr/local/sav

# always succeeds (uncomment to consider mail clean if all other scanners fail)
# ['always-clean', sub {0}],

);


#
# Section VIII - Debugging
#

# The most useful debugging tool is to run amavisd-new non-detached
# from a terminal window:
# amavisd debug

# Some more refined approaches:

# If sender matches ACL, turn log level fully up, just for this one message,
# and preserve temporary directory
#@debug_sender_acl = ( "test-sender\@$mydomain" );
#@debug_sender_acl = qw( debug@example.com );

# May be useful along with @debug_sender_acl:
# Prevent all decoded originals being deleted (replaced by decoded part)
#$keep_decoded_original_re = new_RE( qr/.*/ );

# Turn on SpamAssassin debugging (output to STDERR, use with 'amavisd debug')
#$sa_debug = 1;            # defaults to false

#-------------
1;  # insure a defined return