squirrelmail-change-pass-cn
---------------------------
-Ovaj paket donosi change_pass dodatak (plugin) za SquirrelMail.
+Ovaj paket sadrzi dodatne CARNetove postavke za SquirrelMail
+change_pass dodatak (plugin).
-Izvorni kod change_pass dodatka preuzet je sa adrese:
+Izvorni kod change_pass dodatka moze se preuzeti na lokaciji:
http://www.squirrelmail.org/plugin_view.php?id=21
-squirrelmail-change-pass-cn paket automatski aktivira change_pass
-dodatak unutar SquirrelMail konfiguracije, a zatim vrsi podesavanje
-poppassd servisa.
+squirrelmail-change-pass-cn paket vrsi konfiguraciju change_pass
+dodatka, aktivira isti unutar SquirrelMail konfiguracije, te
+podesava poppassd servis.
Konfiguracija poppassd servisa nalazi se u datoteci:
/etc/hosts.allow i /etc/hosts.deny
-Zbog sigurnosnih razloga, pristup poppassd servisu ogranicen je
+Zbog sigurnosnih razloga, pristup poppassd servisu ogranicen je
na localhost (127.0.0.1).
change_pass dodatak moguce je konfigurirati kroz konfiguracijske
datoteke:
- /usr/share/squirrelmail/plugins/change_pass/config.php
+ /etc/squirrelmail/config_change_pass.php (glavna datoteka)
-ili
+odnosno
- /etc/squirrelmail/config_change_pass.php
+ /usr/share/squirrelmail/plugins/change_pass/config.php
Paket automatski podesava minimalnu duzinu zaporke na 8 znakova -
-duzina zaporke nije odredjena PAM konfiguracijom, vec je definirana
+duzina zaporke nije odredjena PAM konfiguracijom, vec je zadana
u konfiguracijskoj datoteci za change_pass dodatak (varijabla
$min_pass_length).
Dokumentacija se nalazi unutar direktorija:
- /usr/share/doc/squirrelmail-change-pass-cn/
+ /usr/share/doc/squirrelmail-change-pass/
Izvorni odrzavatelj paketa: Zoran Dzelajlija <jelly+paketi@srce.hr>.
Trenutno odrzava: Dragan Dosen <ddosen@ffzg.hr>.
- -- Dragan Dosen <ddosen@ffzg.hr> Mon, 8 Feb 2010 22:29:11 +0100
+ -- Dragan Dosen <ddosen@ffzg.hr> Fri, 26 Mar 2010 19:50:12 +0100
+++ /dev/null
-See the documentation in the doc/ directory.
+++ /dev/null
-<?php
- // The default server is the configured IMAP server
- #$poppass_server = 'localhost';
-
- // The default port is 106
- #$poppass_port = 106;
-
- $min_pass_length = 0;
- $max_pass_length = 9999999;
+++ /dev/null
-Deny from all
+++ /dev/null
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
-
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-\f
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-\f
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-\f
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-\f
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
+++ /dev/null
-$Id: ChangeLog,v 1.2 2009/05/09 17:35:38 indiri69 Exp $
-* Sat May 9 2009 Seth Randall <indiri69@users.sourceforge.net>
-- Code cleanups and changes
-- Updated version number to 3.0
-
-* Sat Jan 17 2009 Seth Randall <indiri69@users.sourceforge.net>
-- Considerable rewrite
-
-* Sat Jun 23 2007 Seth Randall <indiri69@users.sourceforge.net>
-- Added Bahasa Melayu translation by zamri <myzamri@gmail.com>
-
-* Sat Jun 9 2007 Seth Randall <indiri69@users.sourceforge.net>
-- Updated version to 2.7a-1.4.x
-
-* Mon Jun 4 2007 Seth Randall <indiri69@users.sourceforge.net>
-- Added Korean translation by LEE CHANG MIN <mostech@gmail.com>.
-- Added Dutch translation by Sander Eerkes <sander@eerkes.eu>.
-
-* Sun Jun 3 2007 Seth Randall <indiri69@users.sourceforge.net>
-- Added Swedish translation by Erik Lindgren <erk@gote.org>.
-
-* Wed Oct 4 2006 Tomas Kuliavas <tokul@users.sourceforge.net>
-- Added Norwegian Bokmal translation by Svein Olav Bjerkeset
- <sobjerke@users.sourceforge.net>. SquirrelMail tracker #1525721.
-
-* Sat Nov 19 2005 Seth Randall <sethr@missoulafcu.org>
-
-- Added FAQ
-- Updated INSTALL and README files
-- Added Slovenian translation (sl_SI) from "Sasa Stupar <sasa@stupar.homelinux.net>
-- Added Czech translation (cs_CZ) from "Martin Šlouf" <martinslouf@users.sourceforge.net>
-- Updated Italian translation (it_IT) from "Salvatore Bocchetti" <salvatore.bocchetti@euroeuro.net>
-
-* Mon Jul 18 2005 Seth Randall <sethr@missoulafcu.org>
-
-- Added Finnish translation (fi_FI) from "Kari Mattsson" <kari AT trivore DOT com>
-
-* Thu Sep 16 2004 Seth Randall <sethr@missoulafcu.org>
-
-- Added Italian translation (it_IT) from "magomarcelo" <magomarcelo@altervista.org>
-
-* Wed Jul 21 2004 Seth Randall <sethr@missoulafcu.org>
-
-- Added option to specify a poppass server if it's different than the imap server
-- Changed version number to 2.7-1.4.x
-
-* Wed Jun 30 2004 Seth Randall <sethr@missoualfcu.org>
-
-- Added Brazilian Portuguese translation (pt_BR) from "Edinardo Potrich" <edinardo@cbainfo.com.br>
-
-* Thu Dec 18 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Minor updates to some translations
-- Changed version number to 2.6-1.4.x
-
-* Wed Dec 17 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added French translation (fr_FR) from "Ludovic Marcotte" <ludovic@sophos.ca>
-
-* Sun Dec 7 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added German translation (de_DE) from "Steffen Beyer" <sbeyer@reactor.de>
-- Accept 3xx codes after pass command (arguably wrong, but the poppass daemon
- in the ports collection does it that way)
-- Changed version number to 2.5-1.4.x
-
-* Sat Nov 8 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added Bulgarian translation (bg_BG) from "Marian Popov" <mano@pazardjik.com>
-
-* Mon Oct 20 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Changed version number to 2.4-1.4.x
-
-* Wed Oct 1 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added Polish translation (pl_PL) from "Sebastian Turzynski" <buzz@zamek.gda.pl>
-
-* Thu Sep 25 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added Spanish (es_ES) translation from "grana canal10" <grana@canal10.com.uy>
-- Explicitly define SQ_SESSION as the source of onetimepad
-
-* Fri Sep 19 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added translation support (thanks to Ruben Leote Mendes)
-- Added Portuguese (Portugal) (pt_PT) translation from "Ruben Leote Mendes" <ruben@nocturno.org>
-- Added change_pass_version in setup.php
-- Changed version number to 2.3-1.4.x
-
-* Thu Jul 10 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Removed poppassd software
-- Added proper handling of 2xx and 3xx responses
-- Changed version number to 2.2-1.4.x
-
-* Fri Apr 25 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added support for 300 after "user" command (thanks to Richard Gee)
-- Added version file
-- Changed version number to 2.1-1.4.x
-
-* Mon Apr 7 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Updated for SquirrelMail 1.4.x
-- Changed version number to 2.0-1.4.x
-
-* Tue Jan 7 2003 Seth Randall <sethr@missoulafcu.org>
-
-- Added courierpassd
-- Changed version number to 1.5
-
-* Wed Dec 18 2002 Seth Randall <sethr@missoulafcu.org>
-
-- Removed debug code
-- Added a poppassd for some BSDs
-- Changed version number to 1.4a
-
-* Thu Sep 26 2002 Seth Randall <sethr@missoulafcu.org>
-
-- Updated for SquirrelMail 1.2.8
-- Changed version number to 1.4
-
-* Mon Mar 26 2001 Tyler Akins
-
-- Now uses the mail server address instead of hardcoding "localhost"
-- Now forwards to correct URL (removes errors if you want to change your
- password twice in a row)
-- Changed version number to 1.3
-
-* Tue Feb 6 2001 Tyler Akins
-
-- Added debug mode
-- Better error message
-- Better error checking
-- No need to log out and back in after password change
-- Changed version number to 1.2
-
-* Tue Jan 23 2001 Tyler Akins
-
-- Changed variable and function names using change_pass_ as a prefix to
- avoid conflict with other plugins as has been mentioned in the plugins
- mailing list
-- Changed version number to 1.1
+++ /dev/null
-Q. I get an error saying "ERROR: Connection refused (111)"
-
-A. You don't have a poppass daemon running on the server you've selected.
- Make certain you have followed the installation steps in the INSTALL
- document and tested it as shown below.
-
-Q. The plugin does not seem to work
-
-A. Make sure you can change the password manually.
- To test, try telneting into the daemon and changing a password:
-
- $ telnet localhost 106
- Trying 127.0.0.1...
- Connected to localhost.
- Escape character is '^]'.
- 200 poppassd v1.8.1 hello, who are you?
- user <username>
- 200 Your password please.
- pass <oldpassword>
- 200 Your new password please.
- newpass <newpassword>
- 200 Password changed, thank-you.
- quit
- 200 Bye.
- Connection closed by foreign host.
-
+++ /dev/null
-Installing change_pass
-======================
-0) NOTE: This plugin is not needed for SquirrelMail 1.5.0 or above.
- The functionality it provides is already included in the
- change_password plugin that is part of 1.5.x.
-
-1) Start with untaring the file into the plugins directory.
- Here is an example for the 3.0 version of the change_pass plugin.
-
- $ cd plugins
- $ tar -zxf change_pass-3.0-1.4.0.tar.gz
-
-2) By default, the plugin will connect to the IMAP server configured
- for SquirrelMail on port 106 to change passwords.
- If you need to change any of the following:
- IP address of your poppass server
- poppass server port number (if not 106)
- minimum or maximum password length
- you will need to create a configuration file.
-
- Decide if you want to store the plugin configuration file
- in the plugin directory or in the main SquirrelMail config
- directory.
-
- A) To store the configuration file in the plugin directory,
- change into the change_pass directory, copy config_example.php
- to config.php and edit config.php, making adjustments as
- you deem necessary.
-
- $ cd change_pass
- $ cp config_example.php config.php
- $ vi config.php
-
- B) To store the configuration file in the main SquirrelMail
- config directory, change into the change_pass directory,
- copy config_example.php to ../../config/config_change_pass.php
- and edit ../../config/config_change_pass.php, making
- adjustments as you deem necessary.
-
- $ cd change_pass
- $ cp config_example.php ../../config/config_change_pass.php
- $ vi ../../config/config_change_pass.php
-
-3) Go to your config directory and run conf.pl. Choose
- option 8 and move the plugin from the "Available Plugins"
- category to the "Installed Plugins" category. Save and
- exit.
-
- $ cd ../../../../config/
- $ ./conf.pl
-
-4) If not being used with SquirrelMail 1.4.16+,
- please verify that you have the "Compatibility" plugin
- installed (but not necessarily activated).
-
-5) Translations are not included in this package. To get a
- translation, download the language pack needed from:
-
- http://www.squirrelmail.org/download.php
+++ /dev/null
-change_pass plugin for SquirrelMail
-===================================
-Version 3.0, 2009/05/09
-
-Ritchie Low
-Tyler Akins
-Seth Randall <indiri69@users.sourceforge.net>
-
-Description
-===========
-This is a Squirrelmail plugin to change password using the Poppassd service
-
-You can get poppassd compliant services from the following places:
-Pawel Krawczyk http://ipsec.pl/meta/pawel-krawczyk-projekty-open-source.html (Supports PAM)
-Andrew Stevenson ftp://ftp.ugh.net.au/pub/unix/poppwd
-NetWin http://netwinsite.com/poppassd/ (Changes /etc/passwd)
-Kerberos http://kpoppassd.sourceforge.net (Thank to Michael G. Rozman this link)
-HP-UX 11.x http://barney.gonzaga.edu/~awithers/poppassd/ (link from above site)
-BSD users should try the one from the ports collection for their brand of BSD first.
-Courier users should try courierpassd at http://www.arda.homeunix.net/store/
-
-poppassd must be running on your whatever server handles the passwords for your
-mail server for this plugin to work. Other than that, you just need to add
-this plugin to SquirrelMail (using the perl script or by editing config.php
-by hand), and all should be fine. For full installation instructions,
-see the INSTALL file.
-
-To change the server or port poppassd listens on, see the INSTALL file.
-
-If you experience problems, please see the INSTALL file and FAQ
-
-License
-=======
-
-This plugin is released under the GNU General Public
-License (see COPYING for details).
+++ /dev/null
-<?php
-
- /**
- ** index.php -- Displays the main frameset
- **
- ** Copyright (c) 1999-2009 The SquirrelMail development team
- ** Licensed under the GNU GPL. For full terms see the file COPYING.
- **
- ** Redirects to the login page.
- **
- **/
-
- header('Location:../index.php');
+++ /dev/null
-<?php
-/*
- * Licensed under the GNU GPL. For full terms see the file COPYING.
- *
- * $Id: functions.php,v 1.7 2009/05/14 02:33:01 indiri69 Exp $
- */
-
-function change_pass_option_link_do() {
- global $optpage_blocks;
-
- sq_change_text_domain('change_pass');
- $optpage_blocks[] = array(
- 'name' => _("Change Password"),
- 'url' => sqm_baseuri() . 'plugins/change_pass/options.php',
- 'desc' => _("Use this to change your email password."),
- 'js' => FALSE
- );
- sq_change_text_domain('squirrelmail');
-}
-
-function change_pass_dochange($change_pass_old, $change_pass_new, $debug = false) {
- global $username, $imapServerAddress;
- $poppass_server = $imapServerAddress;
- $poppass_port = 106;
-
- if(!@include(SM_PATH . 'config/config_change_pass.php')) {
- @include(SM_PATH . 'plugins/change_pass/config.php');
- }
-
- $error_messages = array();
-
- $pop_socket = @fsockopen($poppass_server, $poppass_port, $errno, $errstr);
- if (!$pop_socket) {
- sq_change_text_domain('change_pass');
- $error_messages[] = sprintf(_("Connection error: %s"), "$errstr ($errno)");
- sq_change_text_domain('squirrelmail');
- return $error_messages;
- }
-
- // Look for a 2xx result to continue
- $result = change_pass_readfb($pop_socket, $debug);
- if(preg_match('/^2\d\d/', $result)) {
- // Send the username whose password to change
- if(fwrite($pop_socket, "user $username\r\n")) {
- $result = change_pass_readfb($pop_socket, $debug);
- if(preg_match('/^[23]\d\d/', $result)) {
- // Send the users current password
- if(fwrite($pop_socket, "pass $change_pass_old\r\n")) {
- $result = change_pass_readfb($pop_socket, $debug);
- if(preg_match('/^[23]\d\d/', $result)) {
- // Send the new password
- if(fwrite($pop_socket, "newpass $change_pass_new\r\n")) {
- $result = change_pass_readfb($pop_socket, $debug);
- if(!preg_match('/^2\d\d/', $result)) {
- sq_change_text_domain('change_pass');
- $error_messages[] = _("Password change was not successful!");
- sq_change_text_domain('squirrelmail');
- } else {
- change_pass_closeport($pop_socket, $debug);
- sqauth_save_password($change_pass_new);
- session_write_close();
- header('Location: ' . sqm_baseuri() . 'src/options.php?optmode=submit&optpage=change_pass&plugin_change_pass=1');
- exit;
- }
- }
- }
- }
- }
- }
- }
- change_pass_closeport($pop_socket, $debug);
- return $error_messages;
-}
-
-function change_pass_closeport($pop_socket, $debug = false) {
- if ($debug) {
- $messages[] = "Closing Connection";
- }
- fputs($pop_socket, "quit\r\n");
- fclose($pop_socket);
-}
-
-function change_pass_readfb($pop_socket, $debug = false) {
- $strResp = '';
- $result = '';
-
- if (!feof($pop_socket)) {
- $strResp = fgets($pop_socket, 1024);
- $result = substr(trim($strResp), 0, 3); // 200, 300, 500
- if($debug) {
- $messages[] = "--> $strResp";
- }
- }
- return $result;
-}
-
-function change_pass_info_real() {
- return array(
- 'english_name' => 'Change Password',
- 'authors' => array(
- 'Richie Low' => array(),
- 'Tyler Akins' => array(),
- 'Seth Randall' => array(
- 'email' => 'indiri69@users.sourceforge.net',
- 'sm_site_username' => 'randall',
- ),
- ),
- 'version' => '3.0',
- 'required_sm_version' => '1.4.0',
- 'requires_configuration' => 0,
- 'requires_source_patch' => 0,
- 'required_plugins' => array(),
- 'per_version_requirements' => array(
- '1.5.0' => SQ_INCOMPATIBLE,
- '1.4.16' => array(
- 'required_plugins' => array()
- ),
- '1.4.0' => array(
- 'required_plugins' => array(
- 'compatibility' => array(
- 'version' => '2.0.13',
- 'activate' => FALSE
- )
- )
- )
- ),
- 'summary' => 'Change passwords using a poppass daemon',
- 'details' => 'Works with a compatible poppass daemon to allow users to change their passwords.'
- );
-}
-
-function change_pass_loadinfo_real() {
- global $optpage, $optpage_name;
-
- if ($optpage == 'change_pass') {
- // i18n: is displayed after "Successfully Saved Options:"
- sq_change_text_domain('change_pass');
- $optpage_name = _("User's Password");
- sq_change_text_domain('squirrelmail');
- }
-}
+++ /dev/null
-<?php
-
- /**
- ** index.php -- Displays the main frameset
- **
- ** Copyright (c) 1999-2009 The SquirrelMail development team
- ** Licensed under the GNU GPL. For full terms see the file COPYING.
- **
- ** Redirects to the login page.
- **
- **/
-
- header('Location:../index.php');
+++ /dev/null
-<?php
-
-/*
- * Licensed under the GNU GPL. For full terms see the file COPYING.
- *
- * $Id: options.php,v 1.7 2009/05/05 03:09:22 indiri69 Exp $
- */
-
-define('SM_PATH', '../../');
-require_once(SM_PATH . 'include/validate.php');
-require_once(SM_PATH . 'functions/html.php');
-require_once(SM_PATH . 'functions/forms.php');
-
-$debug = false;
-
-// Make sure the plugin is activated
-global $plugins;
-if(!in_array('change_pass', $plugins)) {
- exit;
-}
-
-$min_pass_length = 0;
-$max_pass_length = 99999999;
-
-if (!@include(SM_PATH . 'config/config_change_pass.php')) {
- @include(SM_PATH . 'plugins/change_pass/config.php');
-}
-
-include_once(SM_PATH . 'plugins/change_pass/functions.php');
-
-global $color;
-sqgetGlobalVar('change_pass_form', $change_pass_form, SQ_POST);
-
-$error_messages = array();
-$showform = true;
-
-if (isset($change_pass_form)) {
- sq_change_text_domain('change_pass');
- sqgetGlobalVar('change_pass_old', $change_pass_old, SQ_POST);
- sqgetGlobalVar('change_pass_new', $change_pass_new, SQ_POST);
- sqgetGlobalVar('change_pass_verify', $change_pass_verify, SQ_POST);
-
- if(!isset($change_pass_old) || $change_pass_old == '') {
- $error_messages['cp_no_old'] = _("You must type in your current password.");
- }
-
- if(!isset($change_pass_new) || $change_pass_new == '') {
- $error_messages['cp_no_new'] = _("You must type in a new password.");
- }
-
- if(!isset($change_pass_verify) || $change_pass_verify == '') {
- $error_messages['cp_no_verify'] = _("You must also type in your new password in the verify box.");
- }
-
- if(!isset($error_messages['cp_no_new']) && !isset($error_messages['cp_no_verify'])) {
- if($change_pass_new != $change_pass_verify) {
- $error_messages['cp_new_mismatch'] = _("Your new password does not match the verify password.");
- } else {
- if (strlen($change_pass_new) < $min_pass_length ||
- strlen($change_pass_new) > $max_pass_length) {
- $error_messages[] = sprintf(_("Your new password should be %s to %s characters long."),
- $min_pass_length, $max_pass_length);
- }
- }
- }
-
- $old_pass = sqauth_read_password();
- if(!isset($error_messages['cp_no_old']) && $change_pass_old != $old_pass) {
- $error_messages['cp_wrong_old'] = _("Your current password is not correct.");
- }
-
- if(count($error_messages) == 0) {
- $error_messages = change_pass_dochange($change_pass_old, $change_pass_new, $debug);
- if(count($error_messages) == 0) {
- $showform = false;
- }
- }
- sq_change_text_domain('squirrelmail');
-}
-displayPageHeader($color, '');
-sq_change_text_domain('change_pass');
-
-echo
- html_tag('table', "\n" .
- html_tag('tr', "\n" .
- html_tag('td', '<b>' . _("Change Password") . '</b>', 'center', $color[0])
- ),
- 'center', $color[9], 'width="95%" border="0" cellpadding="1" cellspacing="0"') . "<br>\n";
-
-if(count($error_messages) > 0) {
- echo html_tag('table', '', 'center', '', 'width="100%" border="0" cellpadding="1" cellspacing="0"');
- echo html_tag('tr');
- echo html_tag('td', '', 'center');
- echo html_tag('ul');
- foreach($error_messages as $line) {
- echo html_tag('li', htmlspecialchars($line), '', '', 'style="color: ' . $color[2] . '"');
- }
- echo html_tag('/ul');
- echo html_tag('tr', html_tag('td', ' ')) . "\n";
- echo html_tag('/table');
-}
-
-if($showform) {
- echo addForm($PHP_SELF);
- echo
- html_tag('table', "\n" .
- html_tag('tr', "\n" .
- html_tag('td', _("Current Password:"), 'right') .
- html_tag('td', addPwField('change_pass_old', ''), 'left')
- ) .
- html_tag('tr', "\n" .
- html_tag('td', _("New Password:"), 'right') .
- html_tag('td', addPwField('change_pass_new', ''), 'left')
- ) .
- html_tag('tr', "\n" .
- html_tag('td', _("Verify New Password:"), 'right') .
- html_tag('td', addPwField('change_pass_verify', ''), 'left')
- ) .
- html_tag('tr', "\n" .
- html_tag('td', addSubmit(_('Change Password'), 'change_pass_form'), 'center', '', 'colspan="2"')
- ),
- 'center', '', 'border="0" cellpadding="1" cellspacing="0"') . "\n";
- echo html_tag('/form');
- echo html_tag('/body');
- echo html_tag('/html');
-}
-sq_change_text_domain('squirrelmail');
+++ /dev/null
-<?php
- /* change_pass
- *
- * Licensed under the GNU GPL. For full terms see the file COPYING.
- *
- * $Id: setup.php,v 1.8 2009/05/05 03:09:22 indiri69 Exp $
- */
-
-function squirrelmail_plugin_init_change_pass() {
- global $squirrelmail_plugin_hooks;
-
- $squirrelmail_plugin_hooks['optpage_register_block']['change_pass'] = 'change_pass_opt';
- $squirrelmail_plugin_hooks['optpage_set_loadinfo']['change_pass'] = 'change_pass_loadinfo';
-}
-
-function change_pass_info() {
- include_once(SM_PATH . 'plugins/change_pass/functions.php');
- return change_pass_info_real();
-}
-
-function change_pass_version() {
- $info = change_pass_info();
- return $info['version'];
-}
-
-function change_pass_opt() {
- include_once(SM_PATH . 'plugins/change_pass/functions.php');
- change_pass_option_link_do();
-}
-
-function change_pass_loadinfo() {
- include_once(SM_PATH . 'plugins/change_pass/functions.php');
- change_pass_loadinfo_real();
-}
+++ /dev/null
-Change Password
-3.0
squirrelmail-change-pass-cn (3.0-2) stable; urgency=low
+ * Dio paketa koji sadrzi sam change_pass dodatak odvojen je
+ u zasebni paket - squirrelmail-change-pass.
* Automatsko podesavanje minimalne duzine zaporke (8 znakova)
u konfiguraciji change_pass dodatka. (rijeseno: #9565)
* Izmjene unutar datoteka: debian/postinst, debian/prerm i
debian/control.
- * Datoteka config_example.php prebacena je u direktorij
- /usr/share/doc/squirrelmail-change-pass-cn/examples/.
* Azurirana datoteka README.CARNet.
+ * Reorganizacija strukture cijelog Debian paketa.
- -- Dragan Dosen <ddosen@ffzg.hr> Mon, 8 Feb 2010 22:29:11 +0100
+ -- Dragan Dosen <ddosen@ffzg.hr> Fri, 26 Mar 2010 19:50:12 +0100
squirrelmail-change-pass-cn (3.0-1) stable; urgency=low
Section: web
Priority: optional
Maintainer: Dragan Dosen <ddosen@ffzg.hr>
-Build-Depends: debhelper (>= 4.0.0)
-Standards-Version: 3.7.2
+Build-Depends: debhelper (>= 6)
+Standards-Version: 3.7.3
Package: squirrelmail-change-pass-cn
Architecture: all
-Depends: squirrelmail-cn (>= 2:1.4.15-2lenny1), squirrelmail-compatibility (>= 2.0.12-1), xinetd-cn (>= 1:2.3.14-3lenny1), poppassd (>= 1.8.5-3.2), carnet-tools-cn (>= 2.8.1), ${misc:Depends}
-Description: change passwords from SquirrelMail via poppassd
- change_pass is a SquirrelMail plugin that lets you change your
- password using poppassd service. This is pretty safe if the
- IMAP server is localhost.
+Depends: squirrelmail-cn (>= 2:1.4.15-2lenny1), squirrelmail-change-pass (>= 3.0-1), xinetd-cn (>= 1:2.3.14-3lenny1), poppassd (>= 1.8.5-3.2), carnet-tools-cn (>= 2.8.1), ${misc:Depends}
+Description: SquirrelMail plugin: Change Password
+ Change passwords using a poppass daemon.
+ .
+ This is a basic CARNet Debian customization package.
+++ /dev/null
-/usr/share/squirrelmail/plugins
-change_pass/doc/ChangeLog
-change_pass/doc/README
-change_pass/doc/FAQ
-change_pass/doc/INSTALL
-change_pass/doc/COPYING
-debian/changelog.CARNet
-debian/README.CARNet
+README.CARNet
+changelog.CARNet
+++ /dev/null
-change_pass/config_example.php
+++ /dev/null
-change_pass /usr/share/squirrelmail/plugins
fi
-# Configure SquirrelMail change_pass plugin - using defaults,
-# no configuration files if earlier version is older than 3.0-1.
+# First of all, do the backup.
+#
+done_backup=0
+for cpconf_file in $SQCPCONF $CPCONF; do
+ if [ -f "$cpconf_file" ] && [ ! -L "$cpconf_file" ]; then
+ cp_echo "CN: Doing backup for $cpconf_file"
+ cp_backup_conffile -d "/var/backups/$PKG" -p $cpconf_file
+ done_backup=1
+ fi
+done
+if [ $done_backup -eq 1 ]; then
+ cp_echo "CN: Backup is located in directory: /var/backups/$PKG/"
+fi
+
+
+# Remove change_pass configuration files if earlier version is
+# older than 3.0-1.
#
if [ "$2" ] && dpkg --compare-versions $2 lt 3.0-1; then
cp_echo "CN: This version of change_pass plugin contains major changes."
- cp_echo "CN: For detailed description, see documentation in /usr/share/doc/$PKG/."
-
- if [ -f "$SQCPCONF" ]; then
- mv -f "$SQCPCONF" "$SQCPCONF.cn-old"
- cp_echo "CN: Old $SQCPCONF disabled and renamed to $SQCPCONF.cn-old."
- fi
- if [ -f "$CPCONF" ]; then
- mv -f "$CPCONF" "$CPCONF.cn-old"
- cp_echo "CN: Old $CPCONF disabled and renamed to $CPCONF.cn-old."
- fi
+ for cpconf_file in $SQCPCONF $CPCONF; do
+ if [ -f "$cpconf_file" ] || [ -L "$cpconf_file" ]; then
+ rm -f $cpconf_file
+ cp_echo "CN: Removed old $cpconf_file"
+ fi
+ done
fi
-# Check for change_pass configuration file and notify user about
+# Check for change_pass configuration files and notify user about
# minimum password length configuration.
#
-if [ ! -f "$SQCPCONF" ] && [ ! -f "$CPCONF" ]; then
+if egrep -q '^\$plugins\[[0-9]+\][\ ]*=[\ ]*'\''change_pass'\' "$SQCONF"; then
+ /usr/sbin/squirrelmail-configure --remove-plugin change_pass
+fi
+
+if [ ! -f "$SQCPCONF" ]; then
- # Configuration file does not exist.
- cp_echo "CN: Generating new file $CPCONF"
- cat > "$CPCONF" <<EOF
+ if [ -f "$CPCONF" ]; then
+ cp -f "$CPCONF" "$SQCPCONF"
+ cp_echo "CN: $CPCONF copied to $SQCPCONF"
+ else
+
+ # Configuration file does not exist.
+ cp_echo "CN: Generating new file $SQCPCONF"
+ cat > "$SQCPCONF" <<EOF
<?php
//// Begin - Generated by CARNet package $PKG
//
\$max_pass_length = 9999999;
EOF
- min_pass_changed=1
-else
-
- # Checking for configuration file/s and minimum password length.
- echo "CN: Checking for minimum password length configuration."
- cn_tag_re="^\/\/\/\/ Begin - Generated by CARNet package $PKG$"
-
- for cpconf_file in $SQCPCONF $CPCONF; do
-
- min_pass_changed=0
- if [ -f "$cpconf_file" ]; then
+ min_pass_changed=1
+ fi
+fi
- seddef="/^[[:space:]]*\\\$min_pass_length[[:space:]]*=[^;]*;[[:space:]]*$/d;
- s/\\\$min_pass_length[[:space:]]*=[^;]*;//g;"
+if [ $min_pass_changed -eq 0 ]; then
- if egrep -q "$cn_tag_re" "$cpconf_file"; then
+ echo "CN: Checking for minimum password length configuration."
- # Configuration file is tagged by CARNet.
- seddef="$seddef /^\/\/\/\/ End - Generated by CARNet package $PKG$/s/\(.*\)/\1\n"
- seddef="$seddef \\\$min_pass_length = 8;/"
+ cn_tag_re="^\/\/\/\/ Begin - Generated by CARNet package $PKG$"
+ seddef="/^[[:space:]]*\\\$min_pass_length[[:space:]]*=[^;]*;[[:space:]]*$/d;
+ s/\\\$min_pass_length[[:space:]]*=[^;]*;//g;"
- set_min_pass_length "$seddef" "$cpconf_file"
- else
+ if egrep -q "$cn_tag_re" "$SQCPCONF"; then
- if [ "$2" ] && dpkg --compare-versions $2 lt 3.0-2; then
+ # Configuration file is tagged by CARNet.
+ seddef="$seddef /^\/\/\/\/ End - Generated by CARNet package $PKG$/s/\(.*\)/\1\n"
+ seddef="$seddef \\\$min_pass_length = 8;/"
+ set_min_pass_length "$seddef" "$SQCPCONF"
+ else
- # Add CARNet package info lines to config's header and set up $min_pass_length.
- seddef="$seddef 0,/?>/s/^[[:space:]]*\(<?php\|<?\)\(.*\)/\1\n"
- seddef="$seddef\/\/\/\/ Begin - Generated by CARNet $PKG\n\/\/\n"
- seddef="$seddef\/\/ REMOVE this whole block if you DON'T WANT $PKG\n"
- seddef="$seddef\/\/ to edit your configuration file.\n\/\/\n"
- seddef="$seddef\/\/\/\/ End - Generated by CARNet package $PKG\n"
- seddef="$seddef \\\$min_pass_length = 8;\n\2/"
+ if dpkg --compare-versions "$2" lt 3.0-2; then
- set_min_pass_length "$seddef" "$cpconf_file"
- fi
- fi
+ # Add CARNet package info lines to config's header and set up $min_pass_length.
+ seddef="$seddef 0,/?>/s/^[[:space:]]*\(<?php\|<?\)\(.*\)/\1\n"
+ seddef="$seddef\/\/\/\/ Begin - Generated by CARNet $PKG\n\/\/\n"
+ seddef="$seddef\/\/ REMOVE this whole block if you DON'T WANT $PKG\n"
+ seddef="$seddef\/\/ to edit your configuration file.\n\/\/\n"
+ seddef="$seddef\/\/\/\/ End - Generated by CARNet package $PKG\n"
+ seddef="$seddef \\\$min_pass_length = 8;\n\2/"
+ set_min_pass_length "$seddef" "$cpconf_file"
fi
- done
+ fi
fi
+# Just to be sure.
+ln -sf "$SQCPCONF" "$CPCONF"
+
if [ $min_pass_changed -eq 1 ]; then
db_fset squirrelmail-change-pass-cn/min_pass_length seen false
db_title squirrelmail-change-pass-cn - konfiguracija
cp_echo "CN: Old $SQCONF saved as \"/var/backups/${SQCONF##*/}.bak\"."
fi
- cp_echo "CN: Enabling SquirrelMail change_pass plugin in $SQCONF"
/usr/sbin/squirrelmail-configure --install-plugin change_pass
fi
#
if [ -x /etc/init.d/xinetd -a -d /etc/xinetd.d -a -x /usr/sbin/itox ]; then
- if egrep -q '^poppassd' /etc/inetd.conf && \
- [ ! -f /etc/xinetd.d/poppassd ]; then
+ if egrep -q '^poppassd' /etc/inetd.conf && \
+ [ ! -f /etc/xinetd.d/poppassd ]; then
- cp_echo "CN: Enabling poppassd in /etc/xinetd.d/poppassd"
+ cp_echo "CN: Enabling poppassd in /etc/xinetd.d/poppassd"
- touch /etc/xinetd.d/poppassd.$$
- grep "^poppassd" /etc/inetd.conf | \
- itox -daemon_dir /usr/sbin | cp-update "$PKG" /etc/xinetd.d/poppassd.$$
- cp_mv /etc/xinetd.d/poppassd.$$ /etc/xinetd.d/poppassd
+ touch /etc/xinetd.d/poppassd.$$
+ grep "^poppassd" /etc/inetd.conf | \
+ itox -daemon_dir /usr/sbin | cp-update "$PKG" /etc/xinetd.d/poppassd.$$
+ cp_mv /etc/xinetd.d/poppassd.$$ /etc/xinetd.d/poppassd
- need_restart=1
- fi
+ need_restart=1
+ fi
fi
#
if [ $need_restart -eq 1 ]; then
- if [ -x "/etc/init.d/xinetd" ]; then
- if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then
- invoke-rc.d xinetd restart || exit $?
- else
- /etc/init.d/xinetd restart || exit $?
- fi
- fi
+ if [ -x "/etc/init.d/xinetd" ]; then
+ if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then
+ invoke-rc.d xinetd restart || exit $?
+ else
+ /etc/init.d/xinetd restart || exit $?
+ fi
+ fi
fi
--- /dev/null
+#!/bin/sh -e
+
+#DEBHELPER#
+
+exit 0
# configuration.
#
if egrep -q '^\$plugins\[[0-9]+\][\ ]*=[\ ]*'\''change_pass'\' "$SQCONF"; then
- cp_echo "CN: Disabling SquirrelMail change_pass plugin in $SQCONF"
/usr/sbin/squirrelmail-configure --remove-plugin change_pass
fi
- # Backup change_pass configuration file (if any) and notify user.
- #
- if [ -f "$CPCONF" ]; then
- cp_echo "CN: Doing backup for $CPCONF"
- cp_backup_conffile -d "/var/backups/$PKG" -p $CPCONF
- cp_echo "CN: Backup is located in directory: /var/backups/$PKG/"
- rm -f $CPCONF
- rm -f $CPCONF.cn-old
- cp_echo "CN: Configuration for SquirrelMail change_pass plugin has been removed."
- fi
-
# Remove poppassd service from xinetd.
#
if [ -f /etc/xinetd.d/poppassd ]; then
#!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
-#export DH_VERBOSE=1
+PACKAGE = $(shell dh_listpackages)
+TMP = $(CURDIR)/debian/$(PACKAGE)
-configure: configure-stamp
-configure-stamp:
- dh_testdir
- touch configure-stamp
-
-build: build-stamp
-
-build-stamp: configure-stamp
- dh_testdir
- touch build-stamp
+build:
clean:
dh_testdir
dh_testroot
- rm -f build-stamp configure-stamp
- dh_clean
+ dh_clean
+ rm -f install-stamp
-install: build
+install: build install-stamp
+install-stamp:
dh_testdir
dh_testroot
- dh_clean -k
- dh_installdirs
-
-binary-indep: build install
+ dh_clean
+ touch install-stamp
binary-arch: build install
+
+binary-indep: build install
dh_testdir
dh_testroot
- dh_installchangelogs
dh_installdocs
- dh_install -X.svn -Xchange_pass/doc -Xchange_pass/config_example.php -Xchange_pass/README
- dh_installexamples
-# dh_install
-# dh_installmenu
- dh_installdebconf
-# dh_installlogrotate
-# dh_installemacsen
-# dh_installpam
-# dh_installmime
-# dh_installinit
-# dh_installcron
-# dh_installinfo
- dh_installman
+ dh_installchangelogs
dh_link
-# dh_strip
dh_compress
dh_fixperms
-# dh_perl
-# dh_python
-# dh_makeshlibs
+ dh_installdebconf
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_builddeb
binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure
projects / squirrelmail-change-pass-cn.git / commitdiff